[Q] HTC thunderbolt not sending or receiving mms with synergy ROM - Thunderbolt Q&A, Help & Troubleshooting

Im new to rooting, this is the first ROM Ive installed myself, so far the ROM is excellent and I really like it, I'm unable to send or receive mms, Ive searched for other threads and didn't see a solution to my issue. I also read I didn't need to install the stock kernel, the kernel should be with the ROM, anyone have a solution? Thank you

Was having the same problem found this,
Manually did the following
Go to Settings -> Wireless Controls -> Mobile Networks -> Access Point Names -> Android
Modify the following settings:
MMSC: add the after mms - ?X-VZW-MDN=<your ten-digit phone number>
MMS proxy: leave empty
MMS port: 80
Now fixed
It worked for me!

Related

Alltel Mms Dcd 3.0.4

Anyone having success with send/recieve with dcd 3.0.4? I have tried all three patches and have had no luck. Only fix I had was to not load arsoft mms in rom and use lennys cab for mms. Anyone know how to make it work with new arcsoft that is included in dcd kitchen.
i have one person confirming success inbound and outbound with patch #3. have you tried a hard reset and then patch 3?
i am working on correcting the alltel package to work without a 'patch'...
Well I just reflashed your rom .,.then read this so I tried installing patch 3 and now I get "bad request"
mms settings
server alltel mmsc
gateway --- blank
port 8080
server add http:/mms-mt.alltel.net/servlets/mms
thanks for your attention...ur the man..u must get sick of hearing that..lol
by the way...when I had lennys on mine before reflashing again.. i had these settings
alltel mmsc
mms.alltel.com
8080
mms.alltel.com/servlets/mms

[Q] Please Help,

I just finished flashing my At&t Xperia X10a over to 2.1 and I must say it does move a lot quicker now.
Big problem, however, is that I cannot get it to re connect to the network. When I boot up the phone it will tell me to choose the language. When I select English(United States) it then pops up with "Please insert SIM card and restart your phone."
I can hit Cancel and get into the phone and still use everything. Wifi works and all the apps are working no problemo. I just cannot connect to the cellular network at all.
Steps I've taken so far are to go into the settings to Mobile Networks and go to network operators. When you enter, it Searches for mobile networks and locates At&t (and while i'm writing this, for the first time T-Mobile as well -not important). When I Select At&t it says "Registering on At&t" then it fails saying "Your SIM card does not allow a connection to this network."
I know the SIM card works cause I have another phone that i've put it into without any issue. Conversely I've taken my iPhone 3gs SIM and put it into the Xperia just to try to get it to connect and its the same story with the SIM card does not allow a connection to this network.
Have you checked to see if your apn settings are keyed in? If not got to settings/wireless and networks/mobile networks/access point names if theres nothing in there you will need to manually enter your settings for the network. The settings can be found easily by searching at&t apn settings. If your phone cant see your sim though thats a whole nother issue and it might just ne nest to try amd reflash.
Sent from my X10i using XDA App
Like Cmoney said.. reflash is probably the best and only solution here. Factory reset with SEUS will most likely do the trick
When i flashed from 1.6 to 2.1 i had to manually enter apn settings. Im also on ATT so here are the settings.
First go to settings/wireless and networks/mobile networks/access point names (not network operators) then click the menu button and tap "add apn" then use these settings:
Name: ATT
APN: wap.cingular
Proxy: none
Port: none
Username: [email protected]
Password: none
Server: none
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MNC: 410
Authentication Type: none
APN Type: default,supl,mms
Just skip the lines that say none and some of those set themselves.
To avoid this in the future use an app called "APN Backup and Restore" to make a backup of your settings before you flash new FWs.
Sent from my X10i using XDA App
Hi,
i have added apn setting, but no use i think these setting for internet use,,
i have still "no service" message comming,,
I go to the mobile shop,,, they say it is a hardware issue,, idont know what to do,,,
or how can i restore my orignal rom,,, please explane step by step,, i am new to andriod
how to use SEUS
thank you
ubaidlodhi said:
Hi,
i have added apn setting, but no use i think these setting for internet use,,
i have still "no service" message comming,,
I go to the mobile shop,,, they say it is a hardware issue,, idont know what to do,,,
or how can i restore my orignal rom,,, please explane step by step,, i am new to andriod
how to use SEUS
thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928343
use this.. flash the X10i_2_0_2_A_0_24_GLOBAL ROM using Flashtool (just search the forum a bit) (or x10a, if you got an x10a.. to check, remove your battery, it should be on the label attached to your phone)
If that doesnt work, download Pc Companion from
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pccompanion/1.689743/xperiax10?cc=gb&lc=en
here
Connect your phone, and do a factory reset (or what ever its called )

[Q] APNs for x10mini CELCOM [ROM] MiniCM6-1.0.0-RC2

I usually send SET to 20999 to get my setting from my service provider(CELCOM)
They will give me a configuration message that i will save to set my APNs automatically.
But after installing ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), it seems like i cannot receive the configuration message or in other words maybe the custom rom cannot read the configuration message.
Please XDA angels help me with this.
Or anyone using the same custom rom and same service provider as me(Celcom)to help me with this.
I cant believe that there's no one know a single piece of info.
go to you cellcom website look for manual configuration and set it yourself.
i don't know how else to set this but manual configuration works fine.
slade87 said:
go to you cellcom website look for manual configuration and set it yourself.
i don't know how else to set this but manual configuration works fine.
Click to expand...
Click to collapse
Do u have any idea why the rom cannot detect the configurations sent by my service provider through sms?
Or i should reinstall everything?
kingmagauk said:
Do u have any idea why the rom cannot detect the configurations sent by my service provider through sms?
Or i should reinstall everything?
Click to expand...
Click to collapse
I will post it later here whem I get to my pc.
Im having the same problem when using the cm roms, glad I know how to set it up manually and it works.trust me. Either I wil post it here or pm you later.
Sent from my U20i using XDA Premium App
Even if i use the Cyanogen rom i still encounter the same prob.
U are a life saver! Thank god there's someone!
I'll Wait!
for Celcom 3G WAP
in APN add new:
Name: Celcom 3G WAP
APN: celcom3g
Proxy: 010.128.001.242
Port: 8080
User Name: leave it blank
Password: leave it blank
Server: leave it blank
MMSC: leave it blank
MMS proxy: leave it blank
MMS port: leave it blank
MCC: 502
MNC: 19
Authentication type:
APN type: default,supl
save and ready to use
for Celcom 3G MMS
in APN add new:
Name: Celcom 3G MMS
APN: celcom3g
Proxy: leave it blank
Port: leave it blank
User Name: leave it blank
Password: leave it blank
Server: leave it blank
MMSC: http://mms.celcom.com.my
MMS proxy: 010.128.001.242
MMS port: 8080
MCC: 502
MNC: 19
Authentication type:
APN type: mms
save and ready to use
nujhum said:
for Celcom 3G WAP
in APN add new:
Name: Celcom 3G WAP
APN: celcom3g
Proxy: 010.128.001.242
Port: 8080
User Name: leave it blank
Password: leave it blank
Server: leave it blank
MMSC: leave it blank
MMS proxy: leave it blank
MMS port: leave it blank
MCC: 502
MNC: 19
Authentication type:
APN type: default,supl
save and ready to use
for Celcom 3G MMS
in APN add new:
Name: Celcom 3G MMS
APN: celcom3g
Proxy: leave it blank
Port: leave it blank
User Name: leave it blank
Password: leave it blank
Server: leave it blank
MMSC: http://mms.celcom.com.my
MMS proxy: 010.128.001.242
MMS port: 8080
MCC: 502
MNC: 19
Authentication type:
APN type: mms
save and ready to use
Click to expand...
Click to collapse
THANKS A BUNCH!
I'LL TRY THIS SETTINGS IN A WHILE.
so if i use ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), do i still need to enable data traffic? or i just disable it but the mms still working like the SE rom?
kingmagauk said:
THANKS A BUNCH!
I'LL TRY THIS SETTINGS IN A WHILE.
so if i use ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), do i still need to enable data traffic? or i just disable it but the mms still working like the SE rom?
Click to expand...
Click to collapse
im not really sure, since i'll turn it on when when im going to use it, and turn it off when im done.
that's when im on miniCM.
but im on stock rom now. try it if it works as you said.
nujhum said:
im not really sure, since i'll turn it on when when im going to use it, and turn it off when im done.
that's when im on miniCM.
but im on stock rom now. try it if it works as you said.
Click to expand...
Click to collapse
so now ure on SE rom, what are the apps u use to customize ur mini?
kingmagauk said:
so now ure on SE rom, what are the apps u use to customize ur mini?
Click to expand...
Click to collapse
im using stock se rom, removed some useless app with modded framework.
here take a look, the one im using right now.
[THEME]BLUE S.E Notification Icon[2.1.1.A.0.6]
nujhum said:
im using stock se rom, removed some useless app with modded framework.
here take a look, the one im using right now.
[THEME]BLUE S.E Notification Icon[2.1.1.A.0.6]
Click to expand...
Click to collapse
Why u dont stick to the CM rom? it's stable now. with everything working by nobodyatall.
kingmagauk said:
Why u dont stick to the CM rom? it's stable now. with everything working by nobodyatall.
Click to expand...
Click to collapse
it's not that i don't like the CM, im using x10minipro, but using the rom doesnt feeling like using sony phone.
i wanted the feel of sony ericsson android. the feels very important for me.
so that is why i revert back to se rom.
have you done with the APN?

[Q] MMS problem

Hello
I got a big problem that i can't resolve alone. I configure a new APN on my tab and i can access 3G+ but it seems my MMS profile doesn't work. I can't send or receive any MMS....
I join 2 different configurations for Android , one for HTC and the second for Samsung galaxy tab. Anyone can give me any solution to sent an MMS with that?
Thanks a lot!
Pleaaaaassssse help!
I don't know about samsung tab but if it happen to me I will flash a new rom.
Sent from my ViewPad7 using xda premium
It would be helpful to post a little more details on your Vpad7 basics so that maybe, one of us can help figure it out or test our ROM:
Let's take a simplistic step-by-step approach first -
a. are you using stock/factory ROM or rooted, custom ROM including verison #
b. your mobile carrier for the SIM card, both SMS and MMS enabled & working on another quad-band GSM phone
c. SMS working on the Vpad7 as is - both incoming & outgoing
d. using the default Messaging feature/module installed or using something else,
and if you haven't try it already, download & use Handcent for SMS/MMS
f. if you have already done all or some of the above, do a Master Reset on the Vpad7 first to clear all the existing settings, boot into RECOVERY to wipe dalvik/cache/system, and then flash, as suggested, a different custom ROM.
g. any technical support or help from your mobile phone carrier
Cheers - mastering everything on the V is a challenge !
First , i've tried with standard rom. No succes. Then i flashed my vpad7 , installed TJ's rom and... same problem.
BTW you're true , i'll try my sim on another phone , try MMS. And i'll try to put another sim in my vpad7 too.
But , i just think one little thing is missing , because when i look at the other froyo's config , some little thing are changing between diferent phone model.
So , i think viewpad need a personnal configuration.
I got Gosms and tried to configure MMS on the program settings , but same problem.
I've called the technical support but can't help me and told me : "we have some configuration on website , try these , if it don't work , not our fault"
Thanks for your help
Does anyone can send me any working config for MMS on viewpad 7? Just want to see what's different.
THANKS...
These are mine under Settings > Wireless & networks > Mobile Network > APNs, they're OTA/downloaded automatically & self-configured
AT&T MMS (wap.cingular)
Proxy (Not Set)
Port (Not Set)
Username & Password (Not Set)
Server (Not Set)
MMSC (http://mmsc.cingular.com)
MMS proxy (66.209.11.32)
MMS port (80)
MCC (310)
MNC (410)
Authentication (Not Set)
APN type (mms)
Note - these are nearly identical to AT&T WAP, which is usually configured for web browsing with data enabled.
Ok , i tried all solutions and then:
My sim works on other phone , i can send MMS .
Another Sim on my viewpad ( different operator) , once configured , worked. So it's not a viewpad or sim problem , just a Digicel configuration problem.
Any solution?
MMS Working Alternative
I have a Htc Evo 4G synergy rom,I tried all fixes to no avail...I did happen to get internet working..so 1 day while texting my daughter ,we both use Go sms pro ,i went into the setting where you can doodle,well theres an attachment feature to insert images and add a picture...well it works!! And now my solution is here...works for me.

cannot connect to 3G after flashing a custom rom

Help this issue have been annoying me these past 2 months,
so first the issue started when i flash the litening rom v2 something after that i cannot connect using mobile data connection (3G)
I can see that there`s a V3 so maybe try it out. And there`s a lot of other roms so chose one that work without any probs on your device?
tapoutt said:
I can see that there`s a V3 so maybe try it out. And there`s a lot of other roms so chose one that work without any probs on your device?
Click to expand...
Click to collapse
sorry i reply very late. i have changed the rom to resurrection remix ics and still i have that issues also with simplistic rom and wanamlite
anyhelp please?
thunderbald said:
anyhelp please?
Click to expand...
Click to collapse
You may have corrupted your imei/efs folder in flash process! Go to settings/about & check your imei is same as under your battery, then try settings/wireless & network/more/mobile networks & try changing your network mode back & forth, & also you could try putting your device into airplane mode & back again!
If all else fails try this tool: https://play.google.com/store/apps/details?id=net.hellcat.droiddev.ktool&hl=en
In future when flashing different roms always remember to backup your efs folder first!!
Good luck!!
CrackDaddy said:
You may have corrupted your imei/efs folder in flash process! Go to settings/about & check your imei is same as under your battery, then try settings/wireless & network/more/mobile networks & try changing your network mode back & forth, & also you could try putting your device into airplane mode & back again!
If all else fails try this tool: https://play.google.com/store/apps/details?id=net.hellcat.droiddev.ktool&hl=en
In future when flashing different roms always remember to backup your efs folder first!!
Good luck!!
Click to expand...
Click to collapse
hey thanks for the reply but i still dont understand how to use the ktool, should i restore the efs? but there is a dangerous word right after the option.
thunderbald said:
Help this issue have been annoying me these past 2 months,
so first the issue started when i flash the litening rom v2 something after that i cannot connect using mobile data connection (3G)
sorry i reply very late. i have changed the rom to resurrection remix ics and still i have that issues also with simplistic rom and wanamlite
anyhelp please?
Click to expand...
Click to collapse
Have you checked your APNs? Could be they got wiped out when you flashed Litening ROM, and never got re-created when you tried Resurrection Remix, Simplistic, and Wanamlite.
ctomgee said:
Have you checked your APNs? Could be they got wiped out when you flashed Litening ROM, and never got re-created when you tried Resurrection Remix, Simplistic, and Wanamlite.
Click to expand...
Click to collapse
hey when i check my APNs list there is blank no apn is in the list what should i do mate?
thunderbald said:
hey when i check my APNs list there is blank no apn is in the list what should i do mate?
Click to expand...
Click to collapse
Try putting these settings in manually: http://www.unlockit.co.nz/mobilesettings/settings.php?id=267 or contact your mobile carrier!
thunderbald said:
hey when i check my APNs list there is blank no apn is in the list what should i do mate?
Click to expand...
Click to collapse
What CrackDaddy said. Check with your carrier for final word on what their APN settings should be.
You could try to hit "Reset to default" in your APN settings to see if it will pick it up automatically from your carrier first, though.
thunderbald said:
hey when i check my APNs list there is blank no apn is in the list what should i do mate?
Click to expand...
Click to collapse
Here are the manual settings:
- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS
Name: ID - XL Web
APN: www.xlgprs.net
Proxy:
Port:
Username: xlgprs
Password: proxl
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, supl
PXT Messaging MMS:
Name: ID - XL MMS
APN: www.xlmms.net
Proxy:
Port:
Username: xlgprs
Password: proxl
Server:
MMSC: http://mmc.xl.net.id/servlets/mms
MMS Proxy: 202.152.240.50
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: mms
CrackDaddy said:
Here are the manual settings:
- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS
Name: ID - XL Web
APN: www.xlgprs.net
Proxy:
Port:
Username: xlgprs
Password: proxl
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, supl
PXT Messaging MMS:
Name: ID - XL MMS
APN: www.xlmms.net
Proxy:
Port:
Username: xlgprs
Password: proxl
Server:
MMSC: http://mmc.xl.net.id/servlets/mms
MMS Proxy: 202.152.240.50
MMS Port:
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: mms
Click to expand...
Click to collapse
thx man ive managed to manually set the apn names but only in gprs, and now i can connect to the internet again thanks for all your support, and one more question , how do i save the apn names so that one day i wont lose the setting when flashing roms?
thunderbald said:
thx man ive managed to manually set the apn names but only in gprs, and now i can connect to the internet again thanks for all your support, and one more question , how do i save the apn names so that one day i wont lose the setting when flashing roms?
Click to expand...
Click to collapse
There are several apps in the play store to backup and restore APN settings.
Thank you all now all my probs have been solved!!!
what was the fix in the end mate?
tommytenbellies said:
what was the fix in the end mate?
Click to expand...
Click to collapse
... did you not read the thread? He input the APN settings manually.

Categories

Resources