Related
Hi all,
I need some testers from all available roms for x10. From stock rom and all custom roms.
Cause there are many custom roms available and they don't use all the same recovery, it's heavy-handed to create update.zips who can used by everyone. If I count a few there are:
people with a 2.2 rom without the needed files for applying custom kernel
people with a 2.2 rom with the needed files for applying custom kernel
people with a 2.2 rom and xrecovery
people with a 2.2 rom and freexperiarecovery
and so on.
my aim is it, to have one update.zip, who works for all people, no matter if they have applied a custom kernel before or have this recovery and not those...
but i can't test all roms now, cause this would need time and nerves i haven't.
Because that, i made two update.zips:
First includes:
please test this first and if this works, flash the one with the kernel, that we know if there are problems, if they come from the recovery part or the uncompatibility between rom and kernel
chargemon file whos made for FreeXperiaRecovery
FreeXperiaRecovery
Requirements:
this zip should work on all basebands, but i generally prefer bb 2.0.52 from here with bb patch for 2.2 roms from here
Second includes:
chargemon file whos made for FreeXperiaRecovery and boots custom kernel as default
kernel folder: latest custom kernel (k006) with miniloader and splboot.ko files
FreeXperiaRecovery
wifi modules for 2.2 and 2.3 roms
Kernel k011/k012 changelog:
kernel 2.6.29.6
a lil more free ram
removed UV for 998Mhz (seems to be the cause reboots)
Fix FrameCap (Thank Z)
addded all mtd partitions (Thank Z)
volume fix
compiled with new gcc 4.4.3
changed SLAB alocator to SLOB
enabled swap support
added Tiny RCU
added UV/OC (k012)
added UC (k012.1)
FPS cap removed
fixed iptables
Requirements:
Flash the ftf bundle from the latest Cm 7 release with flashtool
Only for 2.2 roms: Basebandpatch 49 from here
Please test the update.zips on your rom (but make a backup before flashing, that you can restore anything if s.th. goes wrong) and report if it works on your rom, and don't forget to tell which rom you tested on.
before installing, make sure you comply the requirements
installation:
For users who haven't FreeXperiaRecovery yet:
first install FreeXperiaRecovery v02.zip
reboot into recovery
install latest version
now boot up system and enjoy
For users who have FreeXperiaRecovery yet:
install directly latest version
now boot up system and enjoy
Legend:
FX = FreeXperia
FXR = FreeXperiaRecovery
gb = Gingerbread
froyo = froyo
only wrote bin or xbin instead of system/bin or system/xbin
Link for first zip (only FreeXperiaRecovery):
FXR_v051.zip
Link for second zip (FreeXperiaRecovery and custom Kernel as default booted):
2.6.29.6_FX_k011+FXR_v0.0.8.2.zip
2.6.29.6_FX_k012+FXR_v0.0.9.1.zip
2.6.29.6_FX_k012.1+FXR_v0.1.0.0.zip
Install this for using the custom kernel with froyo (Thanks ! tsuyo.kou):
http://forum.xda-developers.com/showthread.php?t=1077437
mirror:
http://www.mediafire.com/freerecovery-kernel
I AM NOT RESPONSABLE IF YOU BREAK YOUR DEVICE OR DROP YOUR COFEE !
Notice:
this WILL BREAK DATA2SD and any enhancements/addon features provide by ur current ROM (thanks to DooMLoRD for the information)
All credits go to zdzihu, jerpelea, Bin4ry, Androxyde and all those involved in the FreeXperia project.
Cheers,
L
Trying it on Trips gingerbread MIUI ROM. I'll report back!
It booted, and OC works (setCPU)! Will try it for a while to test performance and battery.
Alright, the touch and animations is very smooth with this kernel. And WiFi works!
I'll use it for a while and see if it drains much battery.
EDIT: As it seems now it drains hella lot battery. :/ Even though im using the BOOST guide and screen of profile in setCPU. Will calibrate the battery a few times and see if it helps..
a1exander said:
Trying it on Trips gingerbread MIUI ROM. I'll report back!
It booted, and OC works (setCPU)! Will try it for a while to test performance and battery.
Alright, the touch and animations is very smooth with this kernel. And WiFi works!
I'll use it for a while and see if it drains much battery.
Click to expand...
Click to collapse
Is FreeXperiaRecovery working?
Downloading now
Im on J's CM7 v 16a incl k006
I know the kernel is inclu but i try urs and report back
Sent from my X10 using XDA Premium App
9Lukas5 said:
Is FreeXperiaRecovery working?
Click to expand...
Click to collapse
Havent tried, I have to go now. But i'll try it later!
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
+1
sent from my Z orignal and modded 2.2 powered c64
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
It is possible, but they don't do. So if my zip works on all roms, you can simply apply your rom how it is described in the rom thread and boot it to be sure the rom works and then flash my zip. If anyone make it that way in future, everyone would have the same recovery and you wouldn't have headache
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
+100000
@OP
please mention that this WILL BREAK DATA2SD and any enhancements/addon features provide by ur current ROM
EDIT:
@OP it would be better if u can create an update.zip to take backup of current recovery and then replace it with FreeXperia recovery... also u can create another "BackToStock" update.zip to remove FreeXperia recovery and then restore original recovery...
@ALL
REQUEST:
please keep reporting ur tests in the following thread....
http://forum.xda-developers.com/showthread.php?t=1018391
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
wali01x said:
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
Click to expand...
Click to collapse
Can anyone confirm??
same thing here with wolf rom. i'm gonna try trip's gingerbread rom.
edit : i confirm it's not working on wolfbreak rom.
tested on jerpelea's v15 stock, everything works except wifi which just shows error, xrecovery works fine.
no rebooting issues.
I have however been using this all day and battery life is good.
wali01x said:
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
Click to expand...
Click to collapse
works fine here... but no bootanimation
use this...
http://forum.xda-developers.com/showthread.php?p=13022717#post13022717
on trip miui gingerbreab rom : stucks on SE logo , now i need to fix the phone with seus.
Same here. Also tried with TripMiui 1.0.4 on froyo too and same tesult.
Sent from my X10i TripNMiUI using XDA App
thor2002ro said:
works fine here... but no bootanimation
use this...
http://forum.xda-developers.com/showthread.php?p=13022717#post13022717
Click to expand...
Click to collapse
thor im gonna give it a shot later on thanks..
just have WLOD while restoring apps with titanium backup on Wolfbreak cm 6.1.3 V061
pd1: bluetooth dont work
ok, s.th. strange happened to me, i flashed the same zip again (i haven't edited the file or moved renamed, nothing) but after that second flashing, my recovery was broken too and i got a lot of fc's like described from many others. Now i wanted to flash freexperiarecovery without kernel to see if the problem is there or by the kernel, but can't get the zip file to work. So, I'm going to sleep now, maybe i can't see anything important at the moment cause i'm so tierd. But thanks for testing it yet on some roms
Custom ROM and Custom Kernels Thread
The last one has not been updated since March so I decided to make this . This will be updated weekly!
THIS ONLY HAS 2.3 ROMS
NOTICE:I AM NOT RESPONSIBLE IF YOUR X10 SPONTANEOUSLY COMBUSTS
KEY
[UBL]:Requires Unlocked Bootloader
Bootloader Unlock Tutorial HEREhttp://forum.xda-developers.com/showthread.php?t=1254087
In no particular order.
If I left out your ROM, put it in the wrong section or misinterpreted it in any way, please PM me so I can fix it .
Generic Firmwares
-All X10 Generic Firmwares (arkedk)
Custom ROMs
2.3.3 Stock-Based ROMs
-Xperia TW06 (Wolfbreak)
-ThGo2 v6.0 (TheJap)
-RecoveryImage 3.0.1.G.75 (DooMLoRD)
-Prerooted STOCK X10 GB Firmware (DooMLoRD)
-EWJet v3.7.1 (erickwill)
-Nocturnal_1.0.5r (Blackwatch89)
-T.E.A.M Fully Transparent ROM (T.E.A.M)
-Wolf's Gaming ROM (Wolfbreak)
-LeafGBr2 (doomed151)
-[url=http://forum.xda-developers.com/showthread.php?t=1266237]DiXperia_3 (DiKeJ)
-Ultima Plus GB (nasif619)
-XSHinyBread v2 (enolok)
-Blue Sparks v061 (malabarth)
FreeX10 Blend 2.3.3 (XGT.CN)
-Infinity MOD (silveraero)
CM7-Based ROMs
-CM 7.1.0 FXP30 (FXP)[UBL]
-CM7 ZMOD (zdzihu)
-ThGocm 1.0 (ThJap)
-FreeXperia CM7.0.3 V2 (Achotjan)
-Supersmooth CM7.1.0 (28spawn)[/url][UBL]
-CM7 Gingervillian (doomed151)
-Galaxy S+CM7 (Z!GZA!G)
MIUI-based ROMs
-miui 1.9.16 (erenz1202)
-SE Likes MIUI (alzbac)
-BlackEdition HD 0.2 (Crowds)
-SkuMIUI 1.9.16 (Skutomten)
-BERMIUI2 2.3.5 (robertberma)
AOSP-based ROMs
-ASOP 2.3.7 Freexperia_spaarc_AOSP (spaarc)
-Spaarc's Oxygenated Gingerscape (spaarc)
-2.3.5 Nightly AOSP OMFSuperoxygen (spaarc)
Custom Kernels
-zKernel 2.6.29 (zdzihu)
-3Kernel Tkymgr & MIUI & Th (Team JP)
-DooMKernel v05 (DooMLoRD)[UBL]
-DooMKernel v04b (DooMLoRD)
Awesome pack ! Keep it up.
BTW - Please change my nick in DiXperia3 from DikeJ to DiKeJ.
Cheers.
http://forum.xda-developers.com/showthread.php?t=1209749
Anyways thanks for the kernel list though
Prodigy said:
http://forum.xda-developers.com/showthread.php?t=1209749
Anyways thanks for the kernel list though
Click to expand...
Click to collapse
ahh! How could I miss that . It's pretty much exactly like mine
kantk20111 said:
ahh! How could I miss that . It's pretty much exactly like mine
Click to expand...
Click to collapse
I can see you spent a lot of time on that... damn.
Maybe get a mod to move it to general section maybe more people would read it that way.
I'm not a fanboy but as a human I feel that you (op) are rather rude to call people tripnballs. its insulting. you people insult trip as though he had murdered your mum. please, grow up.
I really feel for the many brainless people in the world.
Sent from my X10i using XDA App
jingjonas said:
I'm not a fanboy but as a human I feel that you (op) are rather rude to call people tripnballs. its insulting. you people insult trip as though he had murdered your mum. please, grow up.
I really feel for the many brainless people in the world.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Uhhhh....
What the hell are you goin on about?
Prodigy said:
Uhhhh....
What the hell are you goin on about?
Click to expand...
Click to collapse
I had put a secret 'tripnballs' message in there . Removed so I don't get crap from more people.
and @jingjonas, calling someone 'tripnballs', doesn't really constitute a reply if someone murdered your mom . He was very rude to me (still is actually), so I have no respect for him .
But anyway, I removed it because it was immature on my part.
And it's quite rude calling people brainless...if I didn't have a brain, how could I have made that post?
kantk20111 said:
I had put a secret 'tripnballs' message in there . Removed so I don't get crap from more people.
and @jingjonas, calling someone 'tripnballs', doesn't really constitute a reply if someone murdered your mom . He was very rude to me (still is actually), so I have no respect for him .
But anyway, I removed it because it was immature on my part.
And it's quite rude calling people brainless...if I didn't have a brain, how could I have made that post?
Click to expand...
Click to collapse
Awesome dude... I like that word - TripNBall
Sent from my X10i using XDA Premium App
Nice work mate!
A minor correction...
kantk20111 said:
-Prerooted STOCK X10 GB Firmware (DooMLoRD)
Click to expand...
Click to collapse
Is actually just a modified stock kernel not the full firmware
Sent from my GT-I9100 using XDA App
DooMLoRD said:
Nice work mate!
A minor correction...
Is actually just a modified stock kernel not the full firmware
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Thanks, I will do
Please help me to resolve x10 flashing Feralab
--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feralab v29 ROM it works, but stays in SE logo in 1st reboot..
Say goodbye to your experia x10i!
senthilpgv said:
--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feralab v29 ROM it works, but stays in SE logo in 1st reboot..
Click to expand...
Click to collapse
chatian18 said:
Say goodbye to your experia x10i!
Click to expand...
Click to collapse
Ignore chatian's gibberish! You still can restore your X10 using Sony Mobile Update Service, just google it!
XGin 6.2 : (CWM install...I'm a bit puzzled here. Because on my device, xRecovery install works better. I tried both, works on both types. But when I use CWM I have some lag. If I install xRec, is perfect. Hm...)
http://www.multiupload.com/ST0D79D1AX
and
http://www.mediafire.com/?k5w9arh4l5f61xr
Changelog: Based on CM Hero 242. - Andoid 2.3.7. We are close to final CM7.
add
-Launcher home xperia-2011
-Walkman miui-mod by frogy furnetal
-Desclock.apk, alarm
-Backup and restore
Camera.apk mod-
-Youtube app ported from XMP
-Some toogle work perfectly (ultra brighness, brighness toogle is working)
-New Ramdisk with initlogo.rle
-Some system / lib has been edited
deleted
-Home 4-corner
-Xloud
Thx to FrogyFurnetal, KuyaGaol and all of xda-developers.com dev ..
framework with blue and black background http://www.multiupload.com/VLQ6MB59MC
Having stock kernel, from where I stand, test results are the same as in XGin 6.1. concerning Linpack, AnTuTu and Quadrant. I attach screenshots bellow. Well, still a great Rom, the best, good battery life and , of course, Cypress users like me have to add ax8mt.ko module again....
After checking FB Indonesia, looks like the Changelog mostly reffers to tweaking the Rom with the existing , rich, .apk's and making it Compatible with custom kernel. So it looks like the problem lies with me, that I still have Stock kernel...
Attached a Screenshot from Kryshna Yana, from FB Indo, showing great results with diferent Kernel.
Thanks for that,
And for a great job.
I feel there is not enough importance given to this great Rom.
on the other hand is true that I use XGin on a day to day basis from the beginning, so mabe I am a bit bias. But anyways the rom is stable, smooth, and just suitable to my use and to anyone that needs a stable, reliable, no FC and no OC either. Great battery life, 1% loss over night.
All credits to Rieken Yuki : thank you master for a great ROM.
Also to Mika Dee for the site and support.
Credits go deeper - to Shpit, the original XGin Dev, FrogyFurnetal for contribution, other Indo users and Devs and of course to original CM6, CM7 dev. team. As I understand, Rom is ported from Hero.
Thanks to anyone who contributed.
Site link:
http://x8xgin.wordpress.com/
...or just xgin.tk
Download : http://www.multiupload.com/3TERRL6WCW
I will add shortly screenshots and tips and tricks.
Chnagelog:
add
- w8 keyboard
- infinite view xmp (no phonebook.apk xmp)
- sportclockwidget
- miui walkman mod by Frogy Furnetal
- transparent mms 2.2
- w8 user interface
- ICS animations/transitions
base CM7-239
working vibrate sms,call
status bar not transparent
Bluetooth
Offline charging
GPS
and CM7-239 suport
XGin 6.2 :
http://www.multiupload.com/ST0D79D1AX
thanks to admin, so reserve post for me, thank you for elderduke (thx bro)
Shpit, KuyaGaol, FrogyFurnetal (Lasan in xda), doixanh, nobodyAtall, and everything in xda big thanks to you all.
Screenshots with results
Results in Linpack: (Jit enabled) : 7.4-7.5
Results in Quadrant (@600): 1160 (2d: 216, 3d: 383)
AnTuTu: 1443 - but I have quite low card values...
Modules: default is the synaptics -x8gestures.
if you have cypress, add a ax8mt.ko module, change permissions, and rename it to x8gestures....
ADDED: Mastah Rieken Yuki gave me the fix for CMparts, now we have OC and UV on this ROM. Great work!!
All credits to Rieken Yuki!!
Hit post above.
I'LL test it!
i like w8 look out!
@Op, I used Xgin when shpit was behind it, and that was so fun . But, my guess is that ppl even don´t know it too much since Rieken doesn´t play here on XDA, and the OP from Xgin thread is not updating it anymore . Good to know that indo ppl still developing it
Cheers,
b1s
biscoitu said:
@Op, I used Xgin when shpit was behind it, and that was so fun . But, my guess is that ppl even don´t know it too much since Rieken doesn´t play here on XDA, and the OP from Xgin thread is not updating it anymore . Good to know that indo ppl still developing it
Cheers,
b1s
Click to expand...
Click to collapse
Yes, agreed, and seeing that Shpit's XGIN Op did not update, - not to mention changed his XDA name - I decided to post XGin 6.1 for now. We'll see in future what happens. For the moment Rieken Yuki is porting the new nightlies from Hero, but I cannot give ETA for new version. This version I consider it deserves more attention.
Enjoy,
Cheers
Ok my experience:
-Good performance, except the transistion animation, its slow sometimes.
-The boot time is ok, fast.
-I have no problem with bluetooth and wifi.
Bug:
-if i choose clockworkmod on reboot menu, it doesnt enter to it!
I'still testing it! i hope i can do a short review video for the weekend!
elderduke said:
Yes, agreed, and seeing that Shpit's XGIN Op did not update, - not to mention changed his XDA name - I decided to post XGin 6.1 for now. We'll see in future what happens. For the moment Rieken Yuki is porting the new nightlies from Hero, but I cannot give ETA for new version. This version I consider it deserves more attention.
Enjoy,
Cheers
Click to expand...
Click to collapse
Do you know if he is managing to make his on kernel for this ROM?
Edit: About SIMLock, if you unlock bootloader, you will have to unlock sim again, but I didn´t see anyone who did it already. Everyone who unlocked, said that asks Blagus for the fix, but seems that he is not answering, or ppl aren´t giving the expected feedback on the thread. (sry for the OT)
biscoitu said:
Do you know if he is managing to make his on kernel for this ROM?
Click to expand...
Click to collapse
No idea atm ...but I do not have the bootloader unlocked. reason: I had a simlock on my phone...experts say unlocking will re-appear that simlock. Do u know if is true or not? Anyways for that reason I did not ask about kernel, but I will asap.
I updated the thread but only upto 6.0 version.i saw 6.1 version,but there was no changelog and i couldnt update the thread anymore.
On topic-alfs kernel works like a charm for this rom,try it.
sent from my x8 using miniCM
And yes,unlocking BL will restore sim lock.
sent from my x8 using miniCM
DeHuMaNiZeD said:
I updated the thread but only upto 6.0 version.i saw 6.1 version,but there was no changelog and i couldnt update the thread anymore.
On topic-alfs kernel works like a charm for this rom,try it.
sent from my x8 using miniCM
Click to expand...
Click to collapse
Sorry for that , but I posted enough things (changelog, new link, etc) and also I thought the title deserves attention : Rieken Yuki, and not Shpit (thank you for all the work done) anymore.
Thanks for the info with unlocking and for the info on Alfs' kernel, unfortunately I cannot (should not, right? ) unlock it.
Could you be so kind post some Antutu/Quadrant/linpack results with Alfs?
I have no pc right now,and i have nAa kernel for miniCM...if i had alfs kernel i would install xGin...sorry :/
You could unlock your phone if you are willing to pay for another sim unlocking.you have no choce.or,buy another sim card from the phone operator where you bought your x8.
sent from my x8 using miniCM
DeHuMaNiZeD said:
I have no pc right now,and i have nAa kernel for miniCM...if i had alfs kernel i would install xGin...sorry :/
You could unlock your phone if you are willing to pay for another sim unlocking.you have no choce.or,buy another sim card from the phone operator where you bought your x8.
sent from my x8 using miniCM
Click to expand...
Click to collapse
no way, unfortunately, that is not applicable. diferent countries.
But that's off-topic.
When you can, if you remember. No rush. We will be waiting some results.
But meanwhile, do you think nAa kernel is not compatible to XGin? Could you see into that? or you know for a fact?
elderduke said:
no way, unfortunately, that is not applicable. diferent countries.
But that's off-topic.
When you can, if you remember. No rush. We will be waiting some results.
But meanwhile, do you think nAa kernel is not compatible to XGin? Could you see into that? or you know for a fact?
Click to expand...
Click to collapse
nAa kernel is made especcialy for miniCM.on other roms it causes instabillity,wifi is not working etc...only kernel that is confirmed to eork with all roms is alfs.
sent from my x8 using miniCM
By far the best ROM I tried, good looking and battery life Thnx guys.
This rom doesnt work with nobody at all's kernel....i installed the kernel and tried to install this rom...but it loads on forever...(the xgin logo with particles)..have i done wrong.. anyone installed this rom???pls help...
sumith.vj866 said:
This rom doesnt work with nobody at all's kernel....i installed the kernel and tried to install this rom...but it loads on forever...(the xgin logo with particles)..have i done wrong.. anyone installed this rom???pls help...
Click to expand...
Click to collapse
For the moment 6.1. Rom is build to work with kernel Rom. If you check above, nAa Kernel is known not to work with a multitude of Roms. Different would be Alf's Kernel which is known to work on most Roms.
Anyways, the rom is supposed to be installed with xRecovery, so....you can try to do the following:
-go back to stock Kernel, install XGin with xRecovery
- then install Alfs with the patch, then see if that works.
That's all I have for now.
Keep well,
sumith.vj866 said:
This rom doesnt work with nobody at all's kernel....i installed the kernel and tried to install this rom...but it loads on forever...(the xgin logo with particles)..have i done wrong.. anyone installed this rom???pls help...
Click to expand...
Click to collapse
Here is how to install xgin and gingercrutz with alfs kernel.
1.install with stock kernel
2.boot into rom and install root explorer
3.through root explorer go to system/lib/modules and delete the following modules:ax8mt.ko,jbd.ko,jbd2.ko,x8gesture.ko,ext3.ko,ext4.ko
4.now flash alfs kernel and it should work hope i helped
Sent from my E15i using Tapatalk
DeHuMaNiZeD said:
Here is how to install xgin and gingercrutz with alfs kernel.
1.install with stock kernel
2.boot into rom and install root explorer
3.through root explorer go to system/lib/modules and delete the following modules:ax8mt.ko,jbd.ko,jbd2.ko,x8gesture.ko,ext3.ko,ext4.ko
4.now flash alfs kernel and it should work hope i helped
Sent from my E15i using Tapatalk
Click to expand...
Click to collapse
I guess also oc and uv modules, right?
Running FXP116 CM9 on my WT19i
Just wondering why it didnt had the CRT off animation compared to the AOSP minicmsandwich..
If there's a way for me to copy the files for that part and put it on FXP116 CM9 rom.. Any suggestions?
I've got the ROMs for Hybroman v16 and the minicmsandwich R3, I just dont know where & what files its under to make it have the CRT off animation effect
okay i think i've figured it out a little. searched online and read something about a "libsurfaceflinger.so" file which contains the crt off animation.. i saw the same file inside the custom roms i've used which had the crt off animation. im just not sure if it'll work for some ICS roms.. wish me luck
Were you able to make this work on an ICS rom?
Sent from my WT19i using XDA
never got it to work on the FXP116 CM9..
i read on some posts that on most custom roms it'll just cause a bootloop.
for stock roms it actually works fine.
tried extracting files from several roms which had the crt off animation, and followed the right CWM zip templates.. but i am still unsuccessful
i also applied it on the Official Sony ICS 4.1.A.0.562, also doing the bootloop
Thanks for trying. Maybe you should pm kamarush and ask him how he did it in minicm
Sent from my WT19i using XDA
melander said:
Thanks for trying. Maybe you should pm kamarush and ask him how he did it in minicm
Sent from my WT19i using XDA
Click to expand...
Click to collapse
yeah i think thats a good idea. ill also try asking lasan, since his latest MIUI release already has the CRT-off animation effect. MIUI Project RC1 2.4.13
its based from FXP, maybe ill try getting the files from his work and combine it with FXP116 CM9 rom. ill make backups first before i do this.
Hi.
I found this awesome, oldschool htc sense, rom that i want to flash. I only have one question, what kernel should i use it with?
ie stock X8 kernel, cm7 kernel or what?
I'm reposting this in here because I'm sure some of you have an answer and the X8 forum is pretty much dead.