At first, I rooted my P7510 and it worked well.
Then I flashed the kernel by Poitee and I can not enter the system now. The screen is distorted after the title "samsung galaxy".
Now I hope to flash another kernel but I can't put the file into my P7510. Because my PC also can't read it.
I still can get into recovery mode by the way. Can anyone help me?
Thanks in advance.
Ok, I tried some means but no one works.
Could anyone provide a kernel image that can be flashed by Odin? Because I still can access the downloading mode and Odin can detect my P7510.
Related
I have the Korean SHW-M380W Wifi Galaxy Tab 10.1 and was wondering if anyone has had success rooting this device.
I'm having trouble finding the firmware I need. Can anyone direct me?
Thanks.
Hi. Got one and I had no problems with rooting the device
firmware: PDA:EH13 / CSC:EH13
Hi locomaniac
Could you share the EH13 original firmware? and I want to know how to rooting the device
12ways,
You don't really need the original EH13 firmware to root the device - you can always create a unsecured boot.img and flash it, but you need to a custom recovery (such as CWM) flashed thru ODIN first - unfortunately, there are some screen issues when the custom recovery is flashed, so I would probably suggest you hold off on it.
Download anywhere the samsung galaxy tab 10.1 root zip file - search thru this forum if you need - and run that zip from your normal android recovery mode <3e>. You can always 'adb reboot recovery' or just do the normal Power + Volume Down when booting, then select the "recovery" icon - not the "Downloading..." icon, and apply the zip once you have pushed it out to the /sdcard partition.
I'm looking to build a unsecure boot.img with root/Superuser.apk along with the OC kernel applied, but will need to wait until we can get the CWM issue resolved first.
Thanks.
frankus is right.. i have some screenissues when i go to the boot menu... i am also a newbie. ;-)
I have some problems installing the cwm via rom manager... it doesn't find my device... just the i9000 ;-)
hope someone can help
locomaniac said:
frankus is right.. i have some screenissues when i go to the boot menu... i am also a newbie. ;-)
I have some problems installing the cwm via rom manager... it doesn't find my device... just the i9000 ;-)
hope someone can help
Click to expand...
Click to collapse
Did you decide this problem?
Nevermind, I just flashed CMW recovery with odin and I was able to get into recovery mode and do a hard reset. It booted fine now. Phew.
Hi guys,
Is there any hope for my tab (Wifi US ver)?
Long story short, I thought my tab was soft bricked so I tried to flash a stock rom with Odin and it's now looping in the "manual mode: copying common apks", it would freeze there then the Samsung logo would load and it would go back to manual mode and the whole thing loops like this.
I can still get into download mode, but recovery mode loops with the copying apk thing.
Any help or input would be much appreciated. Thanks!
If you can still get into download mode, then find a proper firmware (my advice is www.sammobile.com), and give it another go.. Then root, cwm and try to restore the android again, though it might be corrupted so that's why you got into problems... Anyway, if download mode works it's ok!
EDIT: imo, maybe it should be best to flash with a pit file, so that everything, including /sdcard will be wiped, but you will loose everything (photos, music, etc).
Sent from my amazing 10.1 galaxy tab
A pit file and repartitioning was actually an option I looked into while doing some research, but I'm not sure where I would find a pit file.
I did do a factory reset+clean wipe and flashed a new rom and everything appears to be fine. I think the problem may have been due to Pershoot's new kernal for ICS considering my tab froze after I flashed it, and the ROM flashed after also had a similar kernal as well, and that also froze my tab at boot animation.
But yeah, I'll definitely find a pit file just in case this happens again. Thanks
hey guys. just want to start by saying im a NOOB in the rooting/flashing world so i'll greatly appreciate your patients.
now, I had my glaxy tab 10.1 rooted and was running clockworkmod 4.4 and wanted to upgrade that to the new 5.5.0.4, I went to the following link
http://forum.xda-developers.com/showthread.php?t=1312218
and downloaded the zip file and installed it on to my tab (P7510UW) and now i cant get into recovery. Im not sure where I've gone wrong but if someone can help me get back into recovery that would be awesome. And also if someone can explain why this would happen and how i can prevent this in the future, would be great.
I am running the AOKP rom 4.0.4 if that helps.
again, any and all help is appreciated
thanks.
That recovery isn't for the 10.1 that's why it didn't work. Grab the correct recovery and you won't have a problem.
Beezer80 said:
That recovery isn't for the 10.1 that's why it didn't work. Grab the correct recovery and you won't have a problem.
Click to expand...
Click to collapse
Thanks for the info. Any idea on how I can install the new recovery? Because when I try to boot into recovery my tablet just turns off. Is there a how to guide or something I should be following?
Thanks
Grab the correct recovery for your tab from the development section. Boot into download mode on the tab and Oden the modified recovery.
Are you even able to get the device to the download mode...???
Hi there,
I hope there ist somebody here who could help me.
I was about to install the lates CyanogenMod on my Tablet and kind of screwed up.
My tablet was rooted, but had some problems installing a Recovery-Image. So I installed the stock Rom (3.0.1) and tried to flash CyanogenMod again. Installting everything via Odin works fine, but when I try to boot into recovery it won't work. So I tried to install the recovery image from the CyanogenMod-Wiki via fastboot. At this point the Tablet schows following error:
Code:
Failed to process command getvar: partition-type : recovery error (0x2)
I had the problem before, when my tablet was rooted, that I could not install the recovery via the Rom Manager...
So I thougt that I might have screwed up my partitions at some point. I went on a hunt for the Pit file and then to install stock Rim with the Pit file again. Well I did find a Pit file which is supposed to work for my tablet. But now everything is screwed up. It will not start anymore at all. Either it ist stuck on the Samsung boot screen or it shows an Android with the exclamation mark and doesn't do anything anymore...
This ist the Pit file which ist supposed to work:
Code:
android_fastboot_emmc_full_p4_16G_32G.zip
Has anyone got a working Pit file für the P7100?
Does the Pit file even fix my partition problem?
Is there a way to manually partition the tab and if yes has anyone got a guide?
I hope there ist someone here that can help me. I would really appreciate it! I know I screwed up badly on this one :crying:
Thanks to everyone taking time to help me in advance.
You might try doing stock image to open if you can get to the recovery and just do a full wipe. ....or try opening your stock recovery if you can and just do a factory reset wipe everything
Sent from my SPH-L900 using xda premium
iallmost said:
You might try doing stock image to open if you can get to the recovery and just do a full wipe. ....or try opening your stock recovery if you can and just do a factory reset wipe everything
Click to expand...
Click to collapse
Thanks for your quick response.
On rare occasion I do get into the recovery and did a full wipe of erverything. I even tried to format all the partitions. On some partitions it just said, that it can not format them. I also reinstalled the stock rom a couple of times as well.
Nothing of this worked so far. I am always stuck on the boot screen or the android with the exclamation mark (after I factory reset ist or reinstalled the stock rom)
Edit: When I boot (not flash) the recovery via fastboot I can get into the downloaded recovery from CyanogenMod.
I tried a little more yesterday to revive my tab...
When I flash the stock rom in download mode via odin, it starts afterwards to a screen with the android and the exclamation mark. At this screen I can press the power and volume + button a couple times and then I am in the stock recovery. Tried every option in there, but it just wont helpt. Afterwards it ist stuck on tying to boot into recovery.
When I don't press the power and volume + button and just wait after flashing stock rom, the tab will reboot after a while and gets into a boot loop with the samsung boot screen...
Tried flashing a recovery rom from clockwork as well, but afterwards I am not able to boot into it. My guess is, that the partitions are screwed up and therefore the tab can not boot... Is there a way to manually partition my tab? Can anyone post the partition table for the P7100 (Galaxy Tab 10.1v)?
Oh yeah... Everything started after I flashed the last nightly from CyanogenMod. That was the first time the tab got stuck on the boot screen and ever since can not get past it.
I scared that I completely broke my tab now and wont be able to get it back :crying:
If your thread name is correct you have a 10.1v if I am correct the code name for it is P3 but the Odin file you posted I assume is for the P4 because of its naming. If it is so the you have flashed the wrong stock firmware image for your tab. You have used 10.1 Wifi and 3G model firmware on a 10.1v. Your tablet could be seriously screwed up but there is still hope if you can get into download mode.
Sent from my HTC One using Tapatalk 4 beta
**Press the thanks button if I have helped you.
WildfireDEV said:
If your thread name is correct you have a 10.1v if I am correct the code name for it is P3 but the Odin file you posted I assume is for the P4 because of its naming. If it is so the you have flashed the wrong stock firmware image for your tab. You have used 10.1 Wifi and 3G model firmware on a 10.1v. Your tablet could be seriously screwed up but there is still hope if you can get into download mode.
Click to expand...
Click to collapse
You are right. I have the P3 and flashed the P4 PIT-file. I have read on a couple sites, that the P4 ist as well the right one for the P3 and haven't found another PIT-file just for the P3.
I only started using the PIT file after my bootloop problem started, which was directly after flashing CyanogenMod (nightly). The version I downloaded was supposed to work all right on my tab, but did screw it up. Do you have any idea which part of my tab could be screwed up and what I could try?
I think it is the partitions and I flashed the stock rom for the 10.1v (3.0.1) a couple times (with and without the P4 file)...
I am getting all right into download mode, but can only get into the recovery directly after flashing the stock rom. After one mor restart I can't access the recovery anymore...
Hi guys hope all is good.
The Samsung galaxy SII had been through 4 flashes. 1 siya kernel and cwm recovery which passed on odin i then flashed cwm kitkat compatable and then flashed cm13 and update su so it was bootlooping and left the phone on for about 20 minutes and no luck booting up i decided to enter download mode and flashing it but i get that the odin says "cant open com serial port" and then says thread compleate 0succesafull/1failed. So now im stuck with cyanogen mod recovery and download mode that doesnt work I've tried everything with download mode. Any other possible way to get her going again will be much appreciated.
Thanks in advance and please help i need this asap. Thanks