Xperia X10 MW600 problem. - XPERIA X10 Q&A, Help & Troubleshooting

Xperia X10 have been using.
Phone "Accessories" section,
I bought the Hi-Fi Wireless Headphone FM Radio MW600.
Although this product is compatible with phone accessories;
-The phone does not show the caller's id.
-The phone does not show the name of the music id.
- FM Radio MW600 Hi-fi, wireless headphones connected to my phone,
Incoming call ring tone is playing faster than normal.
This reason, my phone ring tone is playing very bad.
I am waiting for help in an emergency.

What phone do you Pair with MW600..?
Is MW600 already pair correctly as Media & Phone Headset in your phone..?
Try This Step...Reset your MW600 (Turn OFF MW600 - Holddown Power Button "until pairing indicator appear" - "Press & Hold" Both "Power & Call Button" until MW600 Turn OFF)..then Try to Re-Pairing your MW600 with the phone (Set Phone Bluetooth to "Visible").
* MW600 seem Doesn't Show the Caller ID..but it Show Only a Phone Number.
* In Several/Most Phone Type like I've Try with Xperia X10, AINO U10, Samsung Galaxy Spica & Samsung U900 (SouL)..MW600 Will Not Display Track or Music ID..It only Displaying a "WronG Time/Clock" (Paired with Samsung Device)..Don't ask Me Why..
* The Radio should be Work Seperately with a Bluetooth..when Radio beeing Use..Bluetooth will Disconnect with the Phone as "Media Headset" but It Still Pair as "Calling Headset" (We Still able to Receive Call).
* There Should be NO PROBLEM with a Phone RingTone..?!?

Hii Shadows
you say, I did it,
case, no change.
Thank's

Hello ,
for the caller's id,music id it an android issue ,i tried my mw600 with a cheap sony ericsson,and all works well ,but on x10 no :/ hum .
for the issue with the fast ringtone i have it too,and this since the official 2.3.3 update =S ,with 2.1 and 1.6 no probleme,also i have another problem some times when i listen music,then i have an incoming call ,if i answer,it works well,but sometimes when i hang off ,the mw600 stay freezed and displays like an incoming call all the time,the only solution is to turn it off the on again ,i think sony ericsson messed with the bluetooth in 2.3.3 .
by the way sorry for my bad English

Other than the commonly known issues of only displaying phone numbers and no TrackID, I've had no difficulty with my MW600 on my x10 under Wolf's or FeraLab's ROMs (Both based on 2.3.4).
One issue I HAVE had is that I can't be sure which media app is going to steal the focus of the Play/Pause, FF/RW buttons on the device. If I run TuneIn Radio or the Stock Media app, I can't control the Walkman app (my preference) until I reboot the phone. Hopefully I can find a solution to this one. Terribly annoying.

Related

MW600 connection problems

Hi,
A couple of weeks ago, MW600 was working as expected. But at the moment, I've got connection problems. Is anyone experiencing anything similar, or do you have any tips?
I have tried restarting both the phone and the MW. The radio function works perfectly. I have tried renaming my phone.
Here's what I'm doing:
* Turn on MW
* Turn on bluetooth on phone
* Search for units -> pair the two units using code 0000 (starting from scratch, just in case)
* Phone states that MW is connected to phone and media sound
* If mediascape is playing, I hear ~1 second of media sound
* After 1-3 seconds, MW makes a sound (5 descending tones) -> the phone briefly states that MW is connected to media sound only -> the phone goes back to stating that the two units are paired (no connection)
What do you think?
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
I found the battery life to be a bit short....10 minutes of streaming music and it shut off, all this after overnight charging.....I have repeat this 'issue' Friday night, Saturday and Sunday only to have MW600 dead at the office now
My runs 12-15 hours! Without any Problems.
Same, I can use mine for at least 4 days (about one and a half hours a day) before it needs recharging - are you using the right charger?
sergiu84 said:
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
Click to expand...
Click to collapse
Thanks for this suggestion. A full reset solved the problem.
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Alleniv said:
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Click to expand...
Click to collapse
You press the buttons on the MW600 itself, not on the phone. Read the manual that I linked to, it's all in there.
hmm anyone else have problem with the ringtone playing thru the mw600? when the phone rings. i can hear it ring on the bt headset. but it's like play a bit.. then i hear a beep.. then it plays a bit more.. and beep it's like intermittent
The beep means, that the headset is changing from the mediamode to the telephonemode.
Update... The problem above came back. If seems related to using bluetooth and wifi simultaneously. Whenever I'm using BT and enable wifi, BT gets a lot of problems and usually shuts down. Does this happen to anyone else?
Also, in the past I could use the buttons on the headset to change songs etc. That doesn't work anymore, even after resetting the headset etc. Is anyone else experiencing this?
-------------------------------------
Sent via the XDA Tapatalk App
I have problems with MW600 too.
Sometime stays connected for hours and sometime is disconnecting 3 times in 5 min.
I have wifi on 24h/day so, i didn't test without wifi.
i only get disconectet when i try to make a call ... looks like ist sw issue on the x10 since the mw600 dose not make this on other phone .. but that is an nother problem then you have.. BUT !!! i hade the exact same problem includet to what i have now befor i updatet the x10 to the .16 version
edit: my problem is solved. needet to reset it 2 times befor it workt
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
murmeljenta said:
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
Click to expand...
Click to collapse
I have wifi on 24h/day and most of the time i don't have any problems but sometime they get disconnected and i have to turn off/on BT and everything runs fine after.
I will have to try without wifi
Bluetooth and Wireless LAN (WiFi) both uses the same frequency space (~2.5 GHz)
Most of the times Bluetooth should be smart enough to adjust the frequency to co-exist with WiFi devices.
If your area are crowded with other Bluetooth devices and WiFi access-points, the Bluetooth set might having trouble settle on one quiet frequency, and might just sit there trying to switch frequency all the time, never finding a good frequency to settle on.
To help those poor Bluetooth devices along the way, try to change the WiFi access-points channels to create a free channel where the Bluetooth devices can settle on.
Also check if your WiFi access-points have a "Co-exist with Bluetooth" option, and enable it. It will however reduce the frequency-width and therefore the bandwidth slightly on the WiFi, but Bluetooth devices should work with less interruptions.
Connection problem with s60
Hello!
I have an MW600 as well - using with an s60 symbian nokia (6650 fold).
It works corectly when using in bt mode and listening music from the phone, but it alwways lost connection when turm the handsfree to radio. When listening radio, zthere is no connection, no way to get the calls or answer.
Do somebady have the same problem or somebody know how to solve it?
I did reset on mw600 and paired again, but i have the same problem.
á
i haven't had any problems with my MW. i always stream music from my pc via wifi to my X10, then to my MW via BT, witch is connected to a Reciver for party.
have you tryed restarting your MW after pairing.
My problem with this headset is that it doesn't:
1) caller name not displayed on incoming calls
2) Music/Mp3 tags not displayed on lcd (using Poweramp)
3) why does the phones itself rings not the headset just some beeps. Embarrassing when phone rings and then answer on headset.
Resetted but not solved any problems.
Wildfire running Wildpuzzle 0.8 with kernel 4.1 overclocked
Ok I m using mw600 stereo bluetooth headset with CM 6.1.3 V4.4 rom for 2 days now. The pairing is easy but the issues that I am facing are;
* phone has crashed/rebooted couple of times while pairing/ unpairing.
* besides first fact, it pairs without any problems and very easily.
* I have used it with mixzing and doubletwist media players. In both cases the music lags and sometimes the lag/pause is about 2-3 seconds long.
* incoming call shows phone number only, no contact name.
* voice dialing works.
* when I m listening to music or not listening to music on incoming call the headset converts to phone mode fine but after the call is finished, the headset doesnt reverts back to media mode that is, the music doesn't plays again and I tried connecting and disconnecting again but only way to make it work again is restart the headset.
* battery is so far ok for the headset. Infact I runned out of my phone battery while I was trapped in underground and listening to music.lol
* even the headset is connected, if I play youtube video, the sound comes from the phone speaker. In order for it to come from headset I have to play some music from using my headset controls and then play the video and then pause the track. This also happens with music app aswell sometimes. Like the headset is connected and if I play the song using my phone, it will play through phone speaker and I have to pause it and play it using my headset controls in order to listen through my headset.
So far its oki but its annoying the laggy music thing. It only occours in music playback, I spoke to my mate on phone for couple of hours using this headset and both ends could listen loud and clear.
i also paired it with my inspiron duo tablet and its working flawlessly....so anyone have any work around of the above mentioned problems? anyone facing the same problems? is it because i am using custom ROM? i am ok with the headset not showing song tags and stuff but music being laggy is not acceptable...because thats what i bought it for!
Any help would be much appreciated?
thanks

Xperia Ray not compatible .... WHY?

1.The problem
Owned a C902-I changed,bought Xperia Ray. In the car Sony HCB 400 handsfree installed. It worked with the old mobile and not working with the new. The main problem is that I cant record my voice commands VoiceSpeedDial-no default possibility for voice dialing in the NEW Sony mobiles why? - HCB doesnt send my command via bluetooth, mobile has to "hear" it and its microphone too sensitive. HCBfirmware? Bluetotth version? ROM? Please help.
2. My mail to Cyberon
Dear Cyberon,
it's a very good app, Ithink the only what works as the usual ones on older phones.
One question (and problem), because I can't use it till this problem exists.
1. If I record a voice dial command for a phone book entry this app uses my phone's microphone instead of my handsfree kit's microphone (as the old phones).
2. If I initialize a voice calling with the handsfree's button (connected bluetooth certainly) my phone has to 'hear' the command instead of my handsfree's microphone (usual at the old one(s)).
I tried it with other phone (and other program), with my old phone (with the default possibility built in the older phones) and it worked, the handsfree's microphone sent my voice command to the phone and that is called for me who I wanted.
My new phone can't hear my voice command via bluetooth connected handsfree's microphone.
Is this possible to say in your program that if a handsfree connected your program has to use that microphone instead of the phones one?
I would like to try a beta version, think it would be great for other Sony users as well.
(Other question: with the new android (at the end of March) your app will work same as now or conceivable that will work fine?)
(old phone is Sony C902, new one is a Xperia Ray, the handsfree is a Sony HCB 400, bluetooth 2.1 with A2DP, EDR, the app is Voice Speed Dial (most similar to the old (default) program (I like it for this reason, it's language independent)).
best regards
3. An answer from the cyberon
Thanks for your inquiry!
Regarding to your questions, Voice Speed Dial did support the handsfree function, however, we found out that the ROM which built by Sony Ericsson had been changed, the audio driver in Sony Ericsson's phone could not switch to the right audio path that Voice Speed Dial uses, and Voice Speed Dial just follows the official Android system to work on Android phones, since Sony Ericsson did not follow the official Android system to develop their ROM, we may not able to change the system at this moment, hope Sony Ericsson would fix the issue in the future.
This is my problem. Can anybody help?
(sorry for my bad English)
try cyanogen rom
qncogi said:
... VoiceSpeedDial-no default possibility for voice dialing in the NEW Sony mobiles ...
Click to expand...
Click to collapse
Apologies in advance if I have misunderstood your situation. Maybe my satisfactory result represents some difference between the "Headset" & "Handsfree" profiles.
I have a Sony Ericsson Xperia Ray (Android 2.3.4) and a BlueAnt Q2 Bluetooth headset. The phone's bluetooth settings indicate that the BlueAnt Q2 is connected to both "phone" & "media" audio. I have Cyberon's Voice Speed Dial installed.
When I said "Phone Commands" to the BlueAnt Q2, the phone opened the default Android Voice Dialer whereas I wanted it to open the Cyberon Voice Speed Dial.
On the phone I went to Settings>Applications>Manage Applications>All>Voice Dialer and selected "Clear defaults".
The next time I said "Phone Commands" to the BlueAnt Q2, the phone offered to open "Voice Dialer" or "Voice Speed Dial". I selected (Cyberon's) "Voice Speed Dial" as the default.

[Q] bluetooth headset button

On Xperia P stock firmware, I notice that my bluetooth headsets (older, tried and proven Jabra 250 and Parrot CK3000 evolution) allow me to pick up and hang up phone calls with the button(s). However, using the "call pickup" button does not activate voice dialing like I'm used to with other devices, or even with CM9.
Is there a way to hack my desired Bluetooth usage (i.e. start voice dialing/voice search) into the device without using CM9? I've tried several apps like Vlingo but they don't work either.
I've noticed similar behaviour on the Xperia Arc by the way....

[Q] unable to hv communicatn during music player is on thrgh ear phone in xpra sola

When music player is on through ear phone in xperia sola, during that call comes in. Then i am unable hear anything and there is no communication.
After disconnecting the call music player timer continues but no sound comes out.
For having communication properly i need to restart phone every time. I gave the phone
To sony customer care. They flashed the software but the problem still persists.
What should i do to work phone normally?

[Q] Xperia (U/P/Go) bluetooth headset distorton

I have a strange problem with Xperia Go phone and bluetooth headset. My voice is distorted in the direction to person whom I'm speking and I can not use the headset as daily use.
It seems like the microphone gain is set full-time maximum. If I talk quietly the sound is clear, but if I raise my voice it get distorted.
And this is not just me, some of Xperia (Go/U/P) phone owners report same problem in Sony Xperia™ support forum. For some strange reason, some users do not seem to have any problems?
I've tried three different Xperia phone and five different bluetooth headset device, all have the same problem. Other brand phones with headsets working as it should.
The same problem occurs with a stock ICS / JB and CM9.
How the headset microphone gain is adjusted, is there some mechanism for feedback from the phone? Does anyone here have the same problem?
I had this problem a while ago, Xperia U with Jabra CLIPPER, after using the "repair my phone" functionality in PCC, so contacted the customer support in Jabra and they told me to wait until the battery dies, then recharge, also to use it with Wi-Fi disabled, does not really make sense to me but noticed some improvements, finally sold it, and used a wired headset instead... sad but true...
I have also tried everything to fix the problem: wlan off, charging, screen off, repair phone and hf software, isolated phone to another room (to see if internal mic is active same time with bluetooth mic), tried every settings in audio.conf etc.
I have noticed that the "distortion threshold" depends on bluetooth device - the more expensive device (more sensitive microphone?) - more distortion.
Also, Jelly Bean brought little improvement in the situation, but it does not fix it completely.
Does anyone have an interest / skills to investigate the problem more? Is it possible to monitor messages on phone and the bluetooth device to see if the phone tells bluetooth device to set mic gain at maximum?
seems like my xperia go also having the same problem.. when using bluetooth headset, people cant hear my voice clearly, the mic too sensitive causing my voice distorted, and this problem only happen when using bluettooth headset. tried with a few different bluetooth headset and the problem still there.. any solution for so far? can this problem solve by sending phone to sony service center?

Categories

Resources