Been trying to get my phone to run fully on gingerbread, and have tried the official v20e.kdz flash, as well as Mik_os's CM7, both worked great, and I liked them a lot.
BUT, I can't get my 3G/Data connection to work on either. WiFi works fine, and I can connect to the internet fine that way.
So I am currently flashed back to the gross V10V 2.2.1 Froyo until I can get it figured out. I REALLY want to run CM7, but with no 3G I just can't really use it.
Searches have returned nothing. Any other canadian guys out there with this same problem?
I have a data plan, and I am with Koodo/Telus.
I believe it has something to do with the baseband.
Look here: http://forum.xda-developers.com/showthread.php?t=1217504
Already checked it out, but the V10E image will not work with my phone. I need the V10V image for it to work. Is there a 7z for the V10V platform?
Shofire91 said:
Already checked it out, but the V10E image will not work with my phone. I need the V10V image for it to work. Is there a 7z for the V10V platform?
Click to expand...
Click to collapse
If you want a custom ROM, select one that corresponds to your baseband or switch the baseband. If you do not, you will have no data. That is all to it. End of story.
You can extract the baseband yourself from KDZ archive. http://forum.xda-developers.com/showthread.php?t=901417 (steps 1-2).
All of this covered in the sticky thread.
Got it. Currently have extracted needed files from the uncompressed dz file for my stock ROM. I will be reuploading CM7 and franco's kernel,(Lots of users seem to have luck with it, and I liked it when I ran it for a day) and then flashing my V10V radio and I will let you know!
Edit:
Wait, CM7 currently has a bug so 3G/Data does not work? Shoot! Or am I fixing this by flashing my stock rom's baseband? Will find out soon enough....
And I admit I'm a bit of a noob, I only started doing this last week. I'm learning though.
You need old (v10) baseband
Sent from my LG-P500 using XDA App
dr.notor said:
You need old (v10) baseband
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
No dice. My phone was in its factory state when I began this project. It was rooted, installed AmonRa's custom backup, and I installed DrellisDee's Kernel so I could overclock with 2.2.1 froyo. Was stable at 480/768, but it still wasn't enough.
Nandroid backup, google backup, cleared cache, and dalvik. (Thank your AmonRa!)
Flashed CM7, latest stable release 6.5.7
Flashed franco.Kernel.v1-16082011
Booted up, currently running with no issues. Flashed my V10V baseband using LGMDP v1.5.exe .
No errors, everything went well, battery still at 92%.
Still no internet unless connected to WIFI, Damn. Guess I'm S.O.L. on this one eh?
Thanks for the help guys. Gonna check out some other Ginger ROMs and give them a try to see if I can get ginger to work with my 3G network. Any suggestions? I'm stuck with v10 based ROMs since LG hasn't released any V20 setups for my network.
Off to browse the repository of useful P500 posts sticky.
Have you set up the APNs for your Telco?
IceFragmatic said:
Have you set up the APNs for your Telco?
Click to expand...
Click to collapse
Never thought of that, hmmm, APN's are blank. One second....
GOT IT!!!!! Everything is working, 3G, 2G, wifi, etc.
Of course it was something so simple, haha.
THANKS! Awesome help!
Off to play with my phone for a few hours!
At least it works now.
Yeah, I don't think I can put my phone down now. Definitely enjoying the benefits of CM7. I think I am gonna go make my friend with the galaxy S jealous lol.
Sent from my LG-P500 using XDA App
Shofire91 said:
Been trying to get my phone to run fully on gingerbread, and have tried the official v20e.kdz flash, as well as Mik_os's CM7, both worked great, and I liked them a lot.
BUT, I can't get my 3G/Data connection to work on either. WiFi works fine, and I can connect to the internet fine that way.
So I am currently flashed back to the gross V10V 2.2.1 Froyo until I can get it figured out. I REALLY want to run CM7, but with no 3G I just can't really use it.
Searches have returned nothing. Any other canadian guys out there with this same problem?
I have a data plan, and I am with Koodo/Telus.
Click to expand...
Click to collapse
You can't tell me how you got the phone rooted in the first place can you?
I'm with Koodo and have the Froyo 2.2.1 firmware on there.
I've tried everything I can do to get it rooted, and it just won't!
Gingerbreak says that there is a problem and won't do it.
Superoneclick hangs on step 6 which is mounting the SD card
I tried to grab a v10_G flash which is the telus stock ( I think ) but there was an error while trying to flash with kdz flash ( update error param =2 ).
Can ANYBODY help me to figure this out?
I havd koodo, just last friday I rooted 2 friend's phones with the gingerbreak app from xda thread. I took the second one and at first it didn't work because there were too many dots in the file name, simple as that, took me a while to figure it out, so I renamed to something like gingerbreak1.apk and it worked. For the data not working, just google " koodo apn " then you'll end up with the good apn info wich is simply. " sp.koodo.com " , port = 80, NO proxy as it just slow down the net, the other settings as they already are, 302 and 230 or something like that they come as default near the bottom of apn creation option in mobile options. All other fields leave blank. Hope it works..
Sent from my LG-P500 using Much Love
Mangala_Dharma said:
I havd koodo, just last friday I rooted 2 friend's phones with the gingerbreak app from xda thread. I took the second one and at first it didn't work because there were too many dots in the file name, simple as that, took me a while to figure it out, so I renamed to something like gingerbreak1.apk and it worked. For the data not working, just google " koodo apn " then you'll end up with the good apn info wich is simply. " sp.koodo.com " , port = 80, NO proxy as it just slow down the net, the other settings as they already are, 302 and 230 or something like that they come as default near the bottom of apn creation option in mobile options. All other fields leave blank. Hope it works..
Sent from my LG-P500 using Much Love
Click to expand...
Click to collapse
Thanks for the post...
I decided to install a different version of gingerbreak, and suddenly everything worked so simply...
I have since installed clockworkmod and have done a full back up.
Then I installed cyanomod and everything is up and going.
I was nervous to flash the google apps, but everything is happy.
Oh ya... I did have to update my apn data to the koodo network. I've tested MMS in and out.
You might want to try Andy's Phoenix rom; the fastest one and amazing statusbar. Some light text issues will be fixed the 20th october update. Beside that, the best for me with franco 2.6.35.14 oct. 2 kernel. Anyway, glad you could make it
Sent from my LG-P500 using Much Love
Related
I have an Optimus T (P509) running CM7 (6.5.8) on old baseband. It works great and there is no real reason for me to switch ROMs but I am getting the urge to fiddle around with the new CM9. I have no problem/fear of updating to the new baseband, however, after reading this post it has me wondering if it will be worthwhile. Is there anybody using the P509 Optimus T with the new CM9 ROM? If so, how are your results?
Thanks,
Make a backup and try out the new rom. If you like it, keep it else restore.
williamcharles said:
Make a backup and try out the new rom. If you like it, keep it else restore.
Click to expand...
Click to collapse
I'm using the P509 as well. I did the upgrade which entailed flashing v20 Baseband. Window XP and Ubuntu see me phone just fine. HOWEVER, on Win7 the computer only sees USB Mass Storage if it is mounted from ClockworkMod Recovery.
I'm convinced that it's a driver issue...but since this all began, I've noticed the my SCSI Virtual Drive Controller has a registry error... It's a great rom. HOWEVER, now I can't seem to figure out how to flash back to the v10 baseband.
Running through the same steps as before, except when I run the KDZ Updater that worked before, no longer sees my phone. So, I'm not even sure how to revert.
There were so many great roms for old bb, and I'd like to use them again. Wifi calling is missing, which is something I miss.
OVERALL, this is an awesome ROM!!!!!!!! If I can only figure out this problem or figure out how to change the intestines of the T-Mobile Wifi Calling (Keneto.apk) file to work for 4.0.X, all the order will be returned.
ot
i changed my baseband with lgdmp just fine with win7
if kdz cant detect then just shake the phone
there are so many good roms for new bb i dont want to return
one thing: on new bb roms you have to look for roms that support funny sim otherwise 3g will NOT work
---------- Post added at 09:35 PM ---------- Previous post was at 09:34 PM ----------
FetalVivisection said:
I'm using the P509 as well. I did the upgrade which entailed flashing v20 Baseband. Window XP and Ubuntu see me phone just fine. HOWEVER, on Win7 the computer only sees USB Mass Storage if it is mounted from ClockworkMod Recovery.
I'm convinced that it's a driver issue...but since this all began, I've noticed the my SCSI Virtual Drive Controller has a registry error... It's a great rom. HOWEVER, now I can't seem to figure out how to flash back to the v10 baseband.
Running through the same steps as before, except when I run the KDZ Updater that worked before, no longer sees my phone. So, I'm not even sure how to revert.
There were so many great roms for old bb, and I'd like to use them again. Wifi calling is missing, which is something I miss.
OVERALL, this is an awesome ROM!!!!!!!! If I can only figure out this problem or figure out how to change the intestines of the T-Mobile Wifi Calling (Keneto.apk) file to work for 4.0.X, all the order will be returned.
Click to expand...
Click to collapse
try extracting kineto apk from the htc sensation or htc amaze or galaxy s II ics update. you can start from there
Im using the P509, on the new baseband. It seems fine for me. but i also have Att. the 4.0.x roms are nice but i find that i like the 2.3.x ones better.
I really need help with updating to the new baseband. It won't work on my P509. i tried updating to v20 but then it effs up my phone, i lose data, and it messes up my baseband and imei. so someone should really tell me how to update the bb on P509
I flashed gingerbread with kdz then rooted it flashed Cm7 then eventually cm9 everything works
If you on at&t then I think only 2g works for you
I use p509
Sent from my LG-P500 using xda premium
I just used lgmdp in my laptop to update baseband but I think u need the drivers for it to work
Sent from my LG-P500 using xda premium
Hi,
I have an Atrix4g international (Uk retail) which is rooted and unlocked. Until about a week ago I had been running Aura ROM with a days 1.45 kernel. This was all good but I experienced some 3g data problems.
In the end I got fed up of not being able to download pictures when I received an mms and decided to flash back to my original rom. Once done I thought maybe the over clock 1.45 kernel would work with the stock ROM. It didn't and failed but I then noticed my wifi showed error where it usually said connected.
I reflashed my stock room from my recovery backup and it started working ok again. Both times I flashed my recovery it said error with recovery but the phone details read as it did before when it had the original ROM as it was bought.
Since doing I this I have noticed my phone being really laggy.... I also noticein advanced task killer that I never seek to have more than 80mb free ram.
I checked this against task manager and titanium backup and they seem to agree with the figures tb actually said I was using 100% at one point.
I even tried a factory reset fearing the hard brick stories.
I have wiped the davlik and cache and perfomed a factory wipe from recovery mode
Looks like I have a problem..
Anyone got any ideas on how to rectify this.... Is it likely to be anything to do with partitioning???
You atrix geniuses out there are my last hope so I thank you in advance for any wisdom.
Are you using the stock Gingerbread ROM from your carrier? If so, it sounds like you might need to flash a kernel that has the international RAM fix. Try downloading and flashing this if you're on stock Gingerbread.
http://faux.androidro.ms/Atrix-GB-Kernel-024r-ext4-1.00GHz.zip
That's the 1Ghz kernel made by faux123 for Gingerbread ROMs. After you flash that check to see that you have more RAM available.
Sent from my MB860 using XDA
Thanks a million!!!
jadwv2210 said:
Are you using the stock Gingerbread ROM from your carrier? If so, it sounds like you might need to flash a kernel that has the international RAM fix. Try downloading and flashing this if you're on stock Gingerbread.
http://faux.androidro.ms/Atrix-GB-Kernel-024r-ext4-1.00GHz.zip
That's the 1Ghz kernel made by faux123 for Gingerbread ROMs. After you flash that check to see that you have more RAM available.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
You absolute diamond!
Thank you so much.... Perfect fix 556mb ram free and phones running as fast as a priest being chased out of the playground.
You guys on here give priceless advice (most of the time so glad peeps like you take the time to help peeps like me...
Magic!
I'm sorry but I saw the title and just heard this in my head....
Lag city chick, lag lag city chick.... (Tyga - Rack city... stupid song)
Don't ask.
Glad to see you've solved your problem though
Knock on effect??!!
Although I now have many many more rams than an Afghani goat hearder this process has thrown up another problem. The same error message is showing up where it usually says connected under wiring settings and wiring will not activate or connect.
Yes I was trying to flash back to my stock rom (via cm rom manager-reboot into recovery-restore.....)
Ok so the story continues...
after receiving your advice I flashed the file you linked to. And as I reported ram was up dramatically but then when I tried to connect to wifi it wouldn't. I went to settings -wireless settings- checked wiring on check box to turn it on and underneath in grey writing it threw up the message "error" where it usually says "connecting..." or "connected" etc
I went back through cmrm to recovery mode and did the wipe data-wipe cache-restore rom again but did not reflash the file you linked... checked wifi and worked but ram had gone again.
Went back into clement and went through whole process in one. Ie factory data wipe-wipe cache-restored ROM-flashed file you linked to....
Set up phone again checked wifi and still shows error. But my rams are back...
???? Puzzled!
Dont suppose you have an idea whats going on?
tehrules said:
I'm sorry but I saw the title and just heard this in my head....
Lag city chick, lag lag city chick.... (Tyga - Rack city... stupid song)
Don't ask.
Glad to see you've solved your problem though
Click to expand...
Click to collapse
Thats strange cos thats what I was thinking when I wrote it... lol
Problems not yet entirely solved though..... :-(
Desperation is now setting in
Just an update... and help to solve this is really appreciated.
I have trawled the site and others regarding wifi error.
People seem to suggest its a number of things either hardware or software flashing kernels roms radios wifi fix zips etc etc
I can confirm my problem is not hardware.
I flashed back to aura and wifi function is back. And rams up to normal.....
but I have the original problem I cannot send or download pictures when received via mms.
Is there a fix for this?
I assume not and so therefore would like to ask the question does anyone know of a Stock ATRIX international (uk) retail Rom that is compattable with an ATRIX international (uk) retail phone that has been rooted and unlocked.
For some reason my recovery must be corrupt and is giving me jip.
Maybe someone knows why my recovery isn't working and knows how to fix it?
Thanks all in advance...
When I had the problem with wifi reporting just "error", I fixed it by just redownloading the kernel and reflashing it. Maybe try another recovery if that doesn't work, but I don't know why it wouldn't. :|
The wifi problem is most likely the kernel. Since you are on Aura now though with no data or MMS I would recommend changing your APN settings. Try googling the correct APNs for your carrier and changing them under Settings>Wireless and Networks>Mobile Networks>Access Point Names.
Sent from my MB860 using XDA
Dcskeete said:
I assume not and so therefore would like to ask the question does anyone know of a Stock ATRIX international (uk) retail Rom that is compattable with an ATRIX international (uk) retail phone that has been rooted and unlocked.
For some reason my recovery must be corrupt and is giving me jip.
Maybe someone knows why my recovery isn't working and knows how to fix it?
Thanks all in advance...
Click to expand...
Click to collapse
Why dont you try Nottachtrix if you want a blur based rom, or Neutrino for a cm7 based rom?
What recovery are you using? If you arent using Romracers recovery, try flashing his and seeing if his recovery fixes your problem.
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
debinnv said:
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
Click to expand...
Click to collapse
What is the status of your Photon currently? Assuming it is rooted and unlocked, running what rom? Please provide info on what rom you are on now, which one you flashed from, and what process you used to get where you are. The more info provided the easier it will be to help.
Well lets see, currently I am back on stock, but here is what I did. I rooted, unlocked, installed CWM 5.0.2.7 I also flashed jokers recoveryv3 ( I follow QB's videos) So then I installed the gummy rom using this process. Format system, format data, format cache, wipe cache then dalvik cache. flash rom, flash rom again ( now I did not reboot into recovery after I flashed the rom the first time) I just went straight to install rom again. flash gapps, fix permissions. Reboot up and good loving it all. Waited 15 min then rebooted again. That's it. So I am at a loss. Thanks for help if you need any other info please let me know.
Oh I am on 2.3.4 with 198_7 also
In your system settings did you have "home only" or "automatic" selected for your roaming settings? For a lot of these roms, "automatic" is forced roam. And then if you didn't have roaming data enabled, that would explain why you were constantly roaming with no data.
Sent from my MB855 using XDA
Thanks so much .
I did have automatic checked but I did have roaming data enabled also. I flipped it around too with home only. I am truly beginning to think my phone is just plain "off " who knows. It's a shame though, I mean not that stock is bad on this phone but the custom roms are so much better imo. This is the first phone I have ever had a problem with. I have been flashing phones for years. Think I started with a HTC Mogul. That was a solid phone LOL
Does CM7 work for you? If it does then I reckon flashing that and setting it up, then instead of doing a full wipe keep your data and flash CM9 based rom over it, fix permissions and take it from there.
I have not tried CM7 but I can, sure can't hurt to try at this point. Thanks, I will give that a try tomorrow.
Have you tried *#*#4636#*#*? Sometimes flashing changes the radio in that menu. Be careful though, changing something can really Bork your phone. It should be on cdma prl I think
sent from my CM7 MoPho
Deb, my photon has never been kind to me with the 'flash twice' method. It always results in no data. Try cm9 again, but this time wipe cache, system, data, and dalvik, install version 3.1 of cm9, boot into it, reboot to recovery, wipe cache and dalv, then install the latest cm9 version. Always works for me. Good luck
Sent from my MB855 using XDA
Morning all, your all are great. Okay so I am ready to start again. I'm at stock right now so I need to get her all set up again. (Yes my phone is a she) Acvice, I am going to try your method first will let you know in a bit.
Looks like joker's site may be down so I need to try and find the 2 cm9 roms
I have this rom saved already on my computer
beta-0.6.9.1-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed.zip
Wonder if I should try that one or just wait
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
debinnv said:
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
Click to expand...
Click to collapse
You don't have to, but I recommend it.
Sent from my MB855 using XDA
I think th3bill has 0.3.1 in his fixes thread
http://www.mediafire.com/?y7no1r460d4o8zf
sent from my CM7 MoPho
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
debinnv said:
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
Click to expand...
Click to collapse
Glad someone provided you with that 3.1 link. Looking forward to see if it works out for ya.
By the way, you will know it worked if when you boot up in 3.1 you have working data. Flashing the newer version after that will essentially just update everything.
Deb, I take it the flash of 0.3.1 didn't work? Did you have data and then lose it when you flashed 0.6.9.3? What were your exact steps. I just rooted/unlocked and flashed my f-in-law's new photon and it worked just fine. Lemme know what you did and maybe I can help more
sent from my CM7 MoPho
Thanks bullfrog that's nice of you but honestly I'm good now As you know.
I didn't even try to install 0.3.1. I kept thinking about it, seeing I had no luck with 2 others previously so I decided to go the MIUI route and I'm a happy camper with that one. I am a flashaholic for sure, as we all are here. I am thinking though, I am gonna just be happy with where I am at for now. Of course I will most likely decide to give another rom a try at some point.
Of course I am already eyeing a few Samsung Epic touch's on ebay. I hear that one can be a brick just waiting to happen....weeeee I am having way too much fun
I'm glad you made it to MIUI. if you ever want to try cm9 or and of the similar ones (aokp, gummy, paranoid) I would suggest flashing that 0.3.1 first, then updating to the latest cm9, then flashing the variant
sent from my CM7 MoPho
I've been having this issue for a few days now and I haven't been able to solve it myself. I've been using a GB rom for the past few months (this one and it's always been working fine. Still, I wanted to try ICS so I got myself to install CM9 on the device, and while I was at it, updated the baseband to 72. However, since then, I've been unable to connect to Wifi. I can see Wifi networks, but as soon as I try to connect it gets stuck on "Connecting". I tried flashing other ICS roms and restoring the baseband, nothing works. Yesterday I put the rom back that I've been using succesfully over the past months but still no difference.
When I scan for networks, they appear fine. Reception is good, but as soon as it tries to connect the icon changes to the icon for poor reception. It doesn't matter what network I pick. Other devices running Android have no problem connecting.
Does anyone have an idea what might cause this issue? Is there any way to get a logging of the Wifi to see what exactly goes wrong? Any troubleshooting steps I could take? Your help would be very much appreciated
edit: forgot to mention, with CM9 I used the CM9 kernel, with other roms I use Rage kernel
in exactly the same situation as above, except it was all working just fine until a couple of hours ago. now suddenly the router that's sitting right in front of me, giving full signals has turned into a "poor connection"!!!
i'm on CM9 with CM9 kernel and the recommended baseband
especially suspicious is the facebook application that just got updated when it was working fine a couple of hours or so back. hasn't worked since that update
Backup and try this https://www.dropbox.com/s/s587q1udg2ya2s1/Xperia Mini,LWW,Active_wifi_modules.zip flash in cmw and perform factory reset after that..
If it doesn't work then flash this stock ics ftf http://www.4shared.com/rar/du68FPM-/SK17i_41B0431__1249-7380ftf.html?refurl=d1url via flashtool...
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Backup and try this https://www.dropbox.com/s/s587q1udg2ya2s1/Xperia Mini,LWW,Active_wifi_modules.zip flash in cmw and perform factory reset after that..
If it doesn't work then flash this stock ics ftf http://www.4shared.com/rar/du68FPM-/SK17i_41B0431__1249-7380ftf.html?refurl=d1url via flashtool...
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Flashed the Wifi module, did a factory reset and it's connected! Thank you so much :laugh:
my problem solved as well. i didn't read rachit.rc96's reply so i solved it the hard way
was previously on baseband 72, flashed baseband 64 then 72 back again, no luck, went back to gingerbread, rooted then was able to connect to only one of my routers, the other one wasn't even showing up then flashed stock ics rooted that, now able to connect to both routers.
was that a problem with cm9 i wonder. or what?
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
alchemist83 said:
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
Click to expand...
Click to collapse
Thank you for the suggestion. The APN settings on a fresh install, all wiped, are correct and the same as in a working setup.
Any other ideas? Am I really the only one with that problem?
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
JJEgan said:
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
Click to expand...
Click to collapse
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
DF5JT said:
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
Click to expand...
Click to collapse
Possible hardware problem then .
jje
JJEgan said:
Possible hardware problem then .
jje
Click to expand...
Click to collapse
Very unlikely since it works on stock ROMs and [email protected] 0.6.
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
d4fseeker said:
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No, that's not what I said. Stock ROMs work just fine; I actually just flashed the latest leak (DLI5) and had no problems with the network. The problem hasn't changed, so it's what I wrote in the OP: Only JB to work ist latest leak and [email protected] 0.6. All others can be installed but have not network connection other than WiFi.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
EDIT: If it helps, I speak/write fluent german ('Cause I live in germany ^^)
familyguy59 said:
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
Click to expand...
Click to collapse
Thanks for trying to help.
Yes, I have been playing around with all kinds of basebands, trying to flash modems etc. but that does not seem to be the reason for it. I have had different modems working and the very same modems simply did not work with PA at all. Best example ist yesterday's leak DLI5 which I flashed and had a virgin like system working just fine with my network. I then flashed the PA ROM, which then had the same baseband as the latest stock ROM, but, alas, same story: No network.
The weird thing is the brief connect it always shows in the status bar. It lasts roughly 4-5 seconds and then disconnects again, only showing the empty network status display.
It really sucks, because I find the idea of hybrid ROMs really appealing, in fact, this seems to me as a truly superior way of making use of the 720p display.
Need to try logcat next to see whether the connect/disconnect somehow can be monitored from there. Will report on that.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Bump.
Nearly the same prob to me! I loose data if I change my location, also provider "3" in Austria! Stock is working, CM10 nightly also. I tried different Modems tomorrow the ODIN Leak.
Andi
me too
no data network after flash on two diffrent galaxy s2's
kaos7 said:
no data network after flash on two diffrent galaxy s2's
Click to expand...
Click to collapse
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
WiFi works, Mobile Networks do not
2Fast 2Low Customs said:
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
Click to expand...
Click to collapse
I just installed ParanoidAndroid. I'm kind of a noob to all of this.
I understand some, but not all.
My mobile networks are not working.
I don't get any notification at the top of the screen either saying I'm on a mobile network.
I've messed around with the APN settings. It seems that every now and then it'll connect for a brief moment, but I can't really do anything unless I'm connected to WiFi.
Any help would be appreciated.
I came from a stock phone rooted.
Installed this and now I'm here.
Please HELP!!
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
BHARGAV33 said:
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
Click to expand...
Click to collapse
Turns out I just had crappy reception at home.
I wanted to get 3+ but something got in the way and had to go with the 2.+
Sorry for not understanding, but what is AOSP? I see that, but I don't get what is what.
ASOP = Android Open Source Project.. They are best but not that much good at battery
Spend some time on xda and Google your doubts.. You'll surely understand everything from android