[Q] MiniCM7 Pro V7 Incoming Call Problems - Sony Ericsson XPERIA X10 Mini

I have a U20i X10 mini pro with MiniCM7 Pro - Seven Final - GingerBread (2.3.5) on it and when someone tries to call me it only does about half a ring then cuts straight to voicemail with no notifications appearing on my phone whatsoever apart from my balance once the caller has hung up
Ive gone back to stock Rom but will go back to CM7 if the problem is fixable

Maybe it happened because he/she turned off very quickly or it's because you installed wrong, try to install again the newest version

it was happening no matter what, even when the caller didnt hang up quickly, install was ok as went back to stock rom then back to cm7 quite a few times and still no change, but now installed CM7 V7+ and all is well LOVING the rom

Related

[Q] Double Ring

Here is my question: When the phone rings I get my ring tone that I've customized along with a standard sounding ring (unwanted). The unwanted ring continues to ring and ring even after answering the phone. Is this a stupid setting I'm missing? Anyone run into this before? It is driving me crazy.
Phone Specs: Samsung Fascinate running CWM7 nightly 33. I'm pretty customized with GO Homescreen, GO Contacts, GO SMS, Audible, and Beyond Pod (I can't really think of any other apps that effect the audio).
Ideas?
Your Experiencing the phantom ring...i'm not on the nightly cm build but I am running the newest glitch kernel, the one with the audio fix and the new green recovery and I got a phantom ring that lasted throughout the call and it stopped when I hung up..it only happened once and hasn't happened again. So since i'm not on the nightly builds I don't know if its an issue that has come back, because it was fixed for a while. Like I said I did get 1 phantom ring and didn't even reboot or anything and it hasn't come back. I know its not a setting your missing...try a different kernel for cm7 or try an older build and see if the problem persists.
Sent from my SCH-I500 using XDA App
Thanks. I will down grade to a older nightly first.
Sent from my SCH-I500 using XDA App

[Q] Sms Problem With Wb

I was on rooted 2.1 and sms worked great. I upgraded to wolfbreaks 2.3 rom and everything was working great. Except that fact that i have a sms problem. When i try to send a sms sometimes it works... Sometimes it doesnt. I Deleted the apn settings and that seemed to fix it for a while.. Then it did it again. The only way for me to send the sms is to reboot the phone. While it turns on again thats when it sends the text. I tried reflashing the rom, Nothing. Went to 2.3 ultiama rom or something and it still worked at times but then it stopped. If i reboot then i can send. If not that its just stuck forever. I went back to wolfs 2.3.3 and it does it every now and again. But i have been dealing with this for atleast a week and im getting tired of restarting my phone to text someone.... Any help would be great
Also phone specs are as followed
xperia x10a now it says it an i... but whatever
carrier is At&t
Android 2.3.3
Baseband version 2.1.71
Kernel Version 2.6.29.00054-g5f011537 Semcuser semcHost#1
Build Number wolf_xperia_4.0.3_cust
I've had this problem too. The best solution that seems to work for me is making sure that you have a decent amount of ram free. I never found out why I had this problem but after I cleaned my phone out and made sure I didn't have a lot of apps and services running, which frees up ram, my SMS problems went away.
But they still surface from time to time.
Also make sure you have a decent signal when you send messages. That might be another reason but I really don't know.
Sent from my x10 Platinum
Thank you for your reply, That is actually something i never thought of. I have it set so i always keep atleast a min of 100mb.... perhaps i need more then.
Tried boosting more ram.... Still not working. Someone please help
What baseband are you on?
Sent from my x10 Platinum
iceofhavik said:
Also phone specs are as followed
xperia x10a now it says it an i... but whatever
carrier is At&t
Android 2.3.3
Baseband version 2.1.71
Kernel Version 2.6.29.00054-g5f011537 Semcuser semcHost#1
Build Number wolf_xperia_4.0.3_cust
Click to expand...
Click to collapse
I posted it in the very first post....
Try updating to 4.0.4 stock version. That's what i'm on right now.
To tell you the truth if these problems continue to occur of you update, you might want to clean install everything on your phone, especially app data.
So save your contacts and any viable data, a list odd apps you really need and start all over.
hope this helps.
Sent from my x10 Platinum
Alright thanks for the advice.

[Q] Klink won't work on any 2.3 ROM

Hi all
I bought Klink (Red Edition) the other day whilst running FroyoBread V023b Update 9 and it worked without flaw, but yesterday i wanted to try KuyaDroid and GingerDX out for size to see which one suited me best, they are both two brilliant ROMs but i couldn't get Klink to work in either of them, it would immediately Force Close whenever i pressed start :S
Does anyone have a solution for this because at the moment i'm stuck on FroyoBread when I've been itching to switch up for a long while now
Regards
Beans

[Q] Skype crashes after some minutes

My X10 Mini Pro crashes after some minutes within a voice call conversation. I'm using nAa with MiniCm7 2.2.0. It just stucks. I had this in Simplexity 2.2 also. Can somebody help me?
I am having a similar problem with MiniCM7 2.1.9. My phone freezes and sometimes reboots, other times becomes unresponsive to all, so I have to remove the battery to be able to reboot.
I did not have this problem with GinTonic and stock kernel, so Im not sure if this is indeed a problem with the ROM, rathe the kernel.
Could anyone add more info / details on this?
Sent from my U20i using XDA
More digging
Since I got no replies I've started digging myself...
I've plugged my phone in USB and started a live view of logcat.
Then I've tried to reproduce the problem (open and connect Skype, then call someone - in this case, the "Skype echo/call testing service").
A few seconds later my phone gets all black and completely unresponsive.
And in logcat, nothing . Just tome "write blocked (...)" messages
Is there a way to get the logs from the kernel execution?
PS: I'm still posting here because XDA does not allow me to post in the dev thread.

Incoming Call Issue - MIUI v4 (ICS)

Hi, Guyz!
I recently flashed my X10i with the MIUI v4 (ICS) ROM (@ www.forum.xda-developers.com/showthread.php?t=1774623 )... And it's fast and very smooth!
The Main issues are the following:
Incoming Calls - When someone calls me, nothing shows on the screen so I can neither Answer nor Ignore the calls. I can only hear the Ringtone btw...
Disappearence Of The Status Bar - It was there after the first Boot, but then it disappeared! and Whenever I try to access "Status Bar Settings". It says "Settings has stopped"!
I really need to fix these problems as soon as possible ( especially the first one )!
Thanks in advance and GooD Luck!
Since there haven't been any replies, I decided to change the ROM!
I flashed my x10i with FXP142 (CM9) (android 4.0.4). It's working fine now.
Anyways, It would've been much better if I could get the final Android available for my x10i!

Categories

Resources