Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
Related
Hi all,
I think I broke my Galaxy S (I9000). I hope you can help me somehow. Here is the history of things I already did/tried
- my phone was working and had cyanogenmod 9.1 installed
- I wanted to give my phone a little speedup and wiped the cache and dalvik cache partition (did this before and it worked before)
- after this, phone was in a boot loop (even the battery loading animation rebooted over and over)
- the download mode still worked, but no recovery menu appeared!
- as given on cyanogenmod homepage in the install guide I flashed ClockworkMod Recovery using heimdall
- after that, recovery worked again
- I copied the cm9.1 zipfile on my phone to flash it, wiped the whole phone (factory reset), but flashing fails at some asserts (even though I disabled asserts) that seem to check that the target device really is a Galaxy S (I9000) (unfortunatly, I do not have a screenshot and cannot provide one now)
- I also had a ClockworkMod backup I tried to recover, but it fails at restoring /system (unfortunatly, I do not have a screenshot and cannot provide one now)
- so I thought, maybe I can use a regular firmware and flash it with Odin3 (1.87) to make things working at least a little
- started odin, selected firmware and started, but Odin3 got hung at some early point, so I closed Odin after ~10 minutes (see screenshot odin.jpg)
- when I now start my phone, only two symbols appear which kind of signal a problem with a connection to a (PC-)host which I have never seen before (see screenshot startscreen.jpg)
I tried a lot, but now I am out of ideas. Can you help?
Robert
missing attachments
Missed the attachments. Here they are.
Robert
Turn off phone, remove usb cable from pc if it's connected, remove battery, wait around 10 seconds, while battery is still not in the phone press the button combination for download mode. While u still holding the button combination for download mode, force reinsert the battery. Now phone should go into download mode automatically. Connect cable to pc and phone and flash stock Rom via Odin. Good luck
Worked! Great! Phone is back in download mode. Unfortunatly my work pc does not detect the Samsung composite device so I have to wait until I am back home. I hope Odin is working then. As given, it did not when I last tried.
Can you tell me what kind of mode this is, when those two symbols appear?
Robert
It's not any mode, it just an indication that earlier download mode flashing via Odin failed or interrupted by user.
U probably need to kill Kies process via Windows task manager before flashing with Odin because it's known to interrupt Odin, make it hung at setup connection.
Hi,
brought my phone into download mode again and this time odin flashed succesful. However, Kies was never installed on this computer so I have no idea why it worked now.
After flashing the phone rebooted, but stated several errors. They are similar to those which appear on reflashing with the cm91 zip via recovery mode ( "unable to mount ... (file exists)" ). I have made a screenshot and attached it. You have an idea how to help?
I have tried both the 512 and the 803 pit file, same results.
Thanks,
Robert
Tried to re reboot after those errors, but the S-Animation of the stock rom during boot never ended.
Robert
I took another stock firmware, JVI, which contains also a CSC and PDA image. Flashing worked, phone booted, Works!
I will see how to come back to my cm91, but a great step forward .
Thanks,
Robert
Made it back to cm91 . Thank you for your support.
Here are the steps ...
- applied I9000XWJVI.zip with 512 pit and repartition (2.3.3 based german stock firmware)
- applied I9000XWJW6_I9000DBTJW2_DBT (2.3.6 based german stock firmware)
- applied cf-root-xx_oxa_jw4-v4.4-cwm3rfs.zip as this clockworkmod recovery is able to disable verifications before appling a zip
- applied cm91 zipfile
- restored my backup
Robert
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
I can wipe cache and partition but nothing change, it keeps rebooting.
I cant use odin because odin didn't see the phone,
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
I am looking for possibilities and solution for 2 days and I cant find any. Please help me.
bootloop
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
anshulmalviya said:
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
Click to expand...
Click to collapse
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
atilim said:
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
You are right, it was computer malfunction. I can use odin now.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
Click to expand...
Click to collapse
I both try 4.1.2 (with odin) and 4.3 (with octopus) but it keeps rebooting.
I also use octopus box to flash and repair efs.
atilim said:
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
Click to expand...
Click to collapse
If you've cleared the partition structure then you've turned a possible soft brick into a hard brick, you'll need a new motherboard now.
Try flashing the rescue firmware, from the thread in general, but I wouldn't hold out any hope.
Sent from my GT-I9300 using Tapatalk
same problem but worse please help
HI guys i have exactly the same problem but my bootloop was caused by installing recovery through the cwm app and then rebooting to recovery through the app. i rebooted to recovery with an app before and it caused this aswell ...however back then my volume down button was working. i fixed it last time by going into download mode and flashing philz recovery however i cant enter download mode or recovery or boot into system.
PS: my phone doesnt boot into recovery it comes up with the samsung galaxy s3 gt 19300 logo then it comes up with the cwm recovery icon in the middle of my screen and 'clockwordmod recovery v6.0.6.4' at the bottom of the screen then restarts itself.
i dont know what to try i have looked around, didnt want to create a new thread just wanted to find out if anyone has any idea of what i can do except for buying a new volume down button thats my last resort apprently its £35 to fix
easy way to fill up you thanks meter guys as any sort of input and advice is extremely appreciated.
alphadavid99 you fried your lcd when you flashed cwm made for note in the other thread.
Hi i have the issue... I am able to get in Recovery and Download Mode.
While in recovery i had formatted the whole internal memory and tried flashing about three AOSP ROMs (Formatting each time before Flashing) but the only result was the endless boot up screen (not boot loop).
Then i tried flashing a sammy ROM and it worked...
Could someone tell me why am I able to flash Sammy ROM but not AOSP (such as ARCHIDROID & SLIMBEAN).
My Model is GT-i9300
Current Modem - XXUGMK6
Current ROM - S4 Revolution ROM (TM)
Thanks in advance for your time if someone has any suggestions
Hi. I'm new to here so please i appreciate any help you can give .
So the story is... I own a samsung galaxy gio S5660 (i have Android 2.2.1 ) and i wanted to flash a custom rom on it. Well i forgot that i had to root it, so i just flashed the CWM recovery on it and now i cant get into the recovery, the samsung logo just stays. The phone works, it boots up but only not in the recovery mode :s. Also, i cant root from the pc either because i get unknown device, i installed kies, reinstalled the drivers... I get the error : Windows has stopped this device because it has reported problems. (Code 43). It charges via usb but doesnt connect as storage or something like that :/ i cant figure out what to do. The root programs dont recognize/find the device so am i screwed or what :s. I know i was stupid that i didnt think about the root. I've done the rooting on a tablet many times so i dont know why i forgot to do it :s
Thank you for reading. Hope i get an answer
BUMP BUMP-
I did a factory reset with the code from the phone and now its stuck on the samsung logo :s. It enters download mode and fastboot but the most important problem is that the pc doesnt recognize the device so i cant use odin or any similar program to flash a new recovery on it :s. Is there anything i could do?
I tried reinstalling the drivers multiple times.
I tried on 2 laptops and 1 desktop but it's all the same :S.
BUMP.
Help please
BUMP T_T
jaja
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
Method 2: http://forum.xda-developers.com/showthread.php?t=1153310
Method 3: using usb jig: http://www.youtube.com/watch?v=METM3teG5rI
It's not my fault if you hard brick your phone using this methods.
Thanks for answering, but i cant enter recovery as i mentioned early and also odin doesnt detect my phone in download mode :s. When the samsung logo just stays i plug also the usb in then the pc says it cannot recognize the device and its listed as unknown which i before also mentioned. When i attempt to enter recovery it just also stays at the samsung logo and isnt entering it :s..
Bumpbumppp
Guys i still dont got the answer :c
Please can you assist me.
I've read through so many threads explaining that it is easy to fix if I use ODIN. However I cannot seem to get ODIN to recognize my Galaxy S3.
I was doing a factory reset on my device, which has Cyanogenmod installed. Upon rebooting, the phone is now stuck with the Teamwin logo and it continues to loop.
In cannot seem to charge the phone because it's stuck in this mode and when I install ODIN and along with the SAMSUNG USB Drivers. I have no luck with my computer recognizing the device. I am able to get into the Download mode by holding Power, Volume Down and Home buttons - I click Volume up to continue. I then check my ODIN screen and it never appears to say ADDED or anything of that sort.
I'm scared that my phone is going to soon run out of charge and then I will not be able to even attempt to fix this. Please help me.
I've tried the above steps in both Windows 8.1 and Windows 7 and cannot get either of them to recognize my device.
N.B. I have also tried different USB ports as well as different USB cables.
Once again, I plead for any assistance.
Can u go to the custom recovery ??
If so
Do a clean wipe
Do a factory reset (do not do a clean to install new rom,just erase your data)
Wipe your cache
Wipe dalvik cache and see if u can boot it up
Goodluck
Use the latest odin version and see
And why didint you take a nandroid backup before installing custom roms
If u took it
Just restore it
U will surely boot it up
Hi there,
Thanks for your reply.
I managed to solve the issue by using a computer which already had my device USB drivers installed.
The other 2 computers I tried didn't seem to want to recognize the device due to the bootloop - but when linking up to a computer which linked to my phone prior to the ordeal, ODIN then recognized the device and I was able to load stock rom back on.
FYI, I wasn't able to access recovery.
Thank you for your quick response.
i was flashing United Kingdom 4.1.2 I9100XWMS2 on odin, it started up perfectly working perfectly i then turned off my phone (not power off) and then when i went to turn it on again it was a black screen and nothing happened when i was pressing the power button, i took out the battery and put it in and it came up with the boot screen but it got stuck there so i took it out again did the same thing and still stuck on boot screen, i tried booting into recovery nothing happened, i tried booting into download mode nothing happened.
UPDATE: I tried going into download mode again, it came up in a red message saying LOW BATTERY!
UPDATE 2: Just plugged in a usb charger, offline charging working i guess it shows a big battery and green stuff at the bottom.
UPDATE 3: i got into downloading mode i tried flashing my stock XXLPQ 4.0.3 firmware but it got stuck on NAND WRITE START HELP PLEASE!!!
UPDATE 4: Nothing is working guys, everytime i get stuck on NAND WRITE START
can anyone please help me
spyroz540 said:
can anyone please help me
Click to expand...
Click to collapse
Try to uninstall your usb drivers , the go here at the end of the first post (OP - this is Convert kernel zip to tar tool, but no need to do any conversion), download usb drivers and odin. At post #4 you have pre made kernels. Flash any kernel you want DorimanX or Gustavo in AP or PDA box and make sure re-partition NOT ticked. After a successful flash you phone will boot and stays at the boot. take off battery and insert again , power up with power on + home + vol up to enter recovery and format ONLY these partition /data& cache - dalvik cache, system, preload. Once in recovery, your will be able to mount usb or mtp device to recover your files and try flashing a custom rom!
ultravy said:
Try to uninstall your usb drivers , the go here at the end of the first post (OP - this is Convert kernel zip to tar tool, but no need to do any conversion), download usb drivers and odin. At post #4 you have pre made kernels. Flash any kernel you want DorimanX or Gustavo in AP or PDA box and make sure re-partition NOT ticked. After a successful flash you phone will boot and stays at the boot. take off battery and insert again , power up with power on + home + vol up to enter recovery and format ONLY these partition /data& cache - dalvik cache, system, preload. Once in recovery, your will be able to mount usb or mtp device to recover your files and try flashing a custom rom!
Click to expand...
Click to collapse
thank you soo much
ultravy said:
Try to uninstall your usb drivers , the go here at the end of the first post (OP - this is Convert kernel zip to tar tool, but no need to do any conversion), download usb drivers and odin. At post #4 you have pre made kernels. Flash any kernel you want DorimanX or Gustavo in AP or PDA box and make sure re-partition NOT ticked. After a successful flash you phone will boot and stays at the boot. take off battery and insert again , power up with power on + home + vol up to enter recovery and format ONLY these partition /data& cache - dalvik cache, system, preload. Once in recovery, your will be able to mount usb or mtp device to recover your files and try flashing a custom rom!
Click to expand...
Click to collapse
hey dude i got stuck on zimage in odin, the problem is mostly the flashing part i am using kk-kernel-04-02-CWM-for ODIN.tar
(Gustavo Kernel)
It shouldn't stuck, try other kernels, doesn't matter that they are kk or lp. try other usb port, even another pc!
Edit: I forgot , try another cable! Flashing via usb cable there no room for error, so no faulty usb cable ports and corrupted drivers!
ultravy said:
It shouldn't stuck, try other kernels, doesn't matter that they are kk or lp. try other usb port, even another pc!
Edit: I forgot , try another cable! Flashing via usb cable there no room for error, so no faulty usb cable ports and corrupted drivers!
Click to expand...
Click to collapse
ok i will try :good:
ultravy said:
It shouldn't stuck, try other kernels, doesn't matter that they are kk or lp. try other usb port, even another pc!
Edit: I forgot , try another cable! Flashing via usb cable there no room for error, so no faulty usb cable ports and corrupted drivers!
Click to expand...
Click to collapse
i tried the same kernal on my windows 7 computer (different pc) it shows kernal on the top and then it shows the green progress bar and it fills up but still stuck on nand write start please help, this is not even my phone its my friends
i was originally planning to install cm12.1 on this phone, i rooted it but i got this yellow triangle and i tried apps like triangleaway and that didnt work and this made me want to flash a stock firmware so that made me find a 4.1.2 jellybean firmware for i9100 so i flashed that, all working fine but then suddenly it goes black screen and it gets stuck on boot screen. i want to reflash this firmware and stay on stock but it might get stuck.
Follow all the instructions in this guide.....
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Assuming it helps, you will end up with a working stock device.....
You need to persevere with every step as many times as is necessary......
This guide has been written to help people in your situation. It is the ONLY guide you need to refer to as it contains every step you need to recover your device. Nothing else will work for this (other than a JTAG)....
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
Follow all the instructions in this guide.....
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Assuming it helps, you will end up with a working stock device.....
You need to persevere with every step as many times as is necessary......
This guide has been written to help people in your situation. It is the ONLY guide you need to refer to as it contains every step you need to recover your device. Nothing else will work for this (other than a JTAG)....
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
thank you i will try see if it works, if it fails im gonna take it to a repair shop
ok my phone is not charging anymore. it says low battery cant enter download when i enter download mode. when i charge my i9100 it gets stuck at a grey battery with a android loading circle in the middle. i think this may need to go to the repair shop. when i try to just power on, I now have a yellow triangle with Samsung Galaxy S2 i9100 screen and its just stuck there
sorry for the late reply, but it failed, im going to take it to repair shop
spyroz540 said:
sorry for the late reply, but it failed, im going to take it to repair shop
Click to expand...
Click to collapse
Fair play...If you feel there really is no other option.....at least you tried....
Just beware, you *could* end up paying more for a repair than the cost of a working secondhand S2....
http://i.imgur.com/rVnFwJM.jpg