Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
I can wipe cache and partition but nothing change, it keeps rebooting.
I cant use odin because odin didn't see the phone,
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
I am looking for possibilities and solution for 2 days and I cant find any. Please help me.
bootloop
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
anshulmalviya said:
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
Click to expand...
Click to collapse
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
atilim said:
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
You are right, it was computer malfunction. I can use odin now.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
Click to expand...
Click to collapse
I both try 4.1.2 (with odin) and 4.3 (with octopus) but it keeps rebooting.
I also use octopus box to flash and repair efs.
atilim said:
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
Click to expand...
Click to collapse
If you've cleared the partition structure then you've turned a possible soft brick into a hard brick, you'll need a new motherboard now.
Try flashing the rescue firmware, from the thread in general, but I wouldn't hold out any hope.
Sent from my GT-I9300 using Tapatalk
same problem but worse please help
HI guys i have exactly the same problem but my bootloop was caused by installing recovery through the cwm app and then rebooting to recovery through the app. i rebooted to recovery with an app before and it caused this aswell ...however back then my volume down button was working. i fixed it last time by going into download mode and flashing philz recovery however i cant enter download mode or recovery or boot into system.
PS: my phone doesnt boot into recovery it comes up with the samsung galaxy s3 gt 19300 logo then it comes up with the cwm recovery icon in the middle of my screen and 'clockwordmod recovery v6.0.6.4' at the bottom of the screen then restarts itself.
i dont know what to try i have looked around, didnt want to create a new thread just wanted to find out if anyone has any idea of what i can do except for buying a new volume down button thats my last resort apprently its £35 to fix
easy way to fill up you thanks meter guys as any sort of input and advice is extremely appreciated.
alphadavid99 you fried your lcd when you flashed cwm made for note in the other thread.
Hi i have the issue... I am able to get in Recovery and Download Mode.
While in recovery i had formatted the whole internal memory and tried flashing about three AOSP ROMs (Formatting each time before Flashing) but the only result was the endless boot up screen (not boot loop).
Then i tried flashing a sammy ROM and it worked...
Could someone tell me why am I able to flash Sammy ROM but not AOSP (such as ARCHIDROID & SLIMBEAN).
My Model is GT-i9300
Current Modem - XXUGMK6
Current ROM - S4 Revolution ROM (TM)
Thanks in advance for your time if someone has any suggestions
Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
techman20 said:
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
Click to expand...
Click to collapse
Did you ever find a fix for this ? Would of been a dam sight easier if there was rocker buttons on the side all it needs a cache and factory reset and it's fixed
techman20 said:
I Have A Samsung homesync GT-B9150 I Was using odin to flash firmware and now i'm stuck at the Samsung homesync screen, tried re-flashing firmware, firmware flashes but i'm still stuck in boot loop. so does anyone know how to get this out of boot loop . Thanks
Click to expand...
Click to collapse
techman20, have you ever solved this? I ran to exact same issue and have been tried different methods for the past 2 days. I'm new to Android so need community's help.
Here is the current state of my device (GT-B9150 Samsung Homesync):
- In order to get root, flashed ROM MJ1 (TUR version), followed this thread: http://forum.xda-developers.com/showthread.php?t=2497102
- After flash the device got very slow so I figured I need to wipe the data and cache partition
- There is no volume key of the device so I use adb to reboot to recovery mode (debug mode has been enabled earlier), again there is no key so I didn't know how to select in the screen (should have use adb command as well, I was not that familar with adb), instead I put into the command rm -r /data, then the device dead
- After reboot the device stuck in the bootloop: I see samsung logo and homesync logo, NO adb connection (I think the debugging mode is not on)
- I tried flash a few other versions of the ROM and it does not working as well, all stuck same at the bootloop
I figured if I can wipe the data and cache partition after a fresh installation of ROM the device could be saved.
Here are a few path that I see can solve this:
Option 1: Get into recovery mode, but I don't know the key combination, also adb is not working so seems can not use command line either
Option 2: Since I'm able to get into download mode, I can use Odin to flash some sort of bootloader with adb function, so that I can later use command to get into recovery mode
Option 3: Complete wipe out the device, re-partition using Odin
Since I'm new I don't exactly know if any options here makes sense and what are the risk for each. Also I don't have the pip for option 3. Would be great if any expert here can shed some light on, it's been bothered me for 2 entire days at weekend.
Thanks,
Is there anyone can please help me with this issue, or provide some insights?
Thanks
wangxiao said:
techman20, have you ever solved this? I ran to exact same issue and have been tried different methods for the past 2 days. I'm new to Android so need community's help.
Here is the current state of my device (GT-B9150 Samsung Homesync):
- In order to get root, flashed ROM MJ1 (TUR version), followed this thread: http://forum.xda-developers.com/showthread.php?t=2497102
- After flash the device got very slow so I figured I need to wipe the data and cache partition
- There is no volume key of the device so I use adb to reboot to recovery mode (debug mode has been enabled earlier), again there is no key so I didn't know how to select in the screen (should have use adb command as well, I was not that familar with adb), instead I put into the command rm -r /data, then the device dead
- After reboot the device stuck in the bootloop: I see samsung logo and homesync logo, NO adb connection (I think the debugging mode is not on)
- I tried flash a few other versions of the ROM and it does not working as well, all stuck same at the bootloop
I figured if I can wipe the data and cache partition after a fresh installation of ROM the device could be saved.
Here are a few path that I see can solve this:
Option 1: Get into recovery mode, but I don't know the key combination, also adb is not working so seems can not use command line either
Option 2: Since I'm able to get into download mode, I can use Odin to flash some sort of bootloader with adb function, so that I can later use command to get into recovery mode
Option 3: Complete wipe out the device, re-partition using Odin
Since I'm new I don't exactly know if any options here makes sense and what are the risk for each. Also I don't have the pip for option 3. Would be great if any expert here can shed some light on, it's been bothered me for 2 entire days at weekend.
Thanks,
Click to expand...
Click to collapse
Anyone can please help me?
wangxiao said:
Anyone can please help me?
Click to expand...
Click to collapse
for boot loop you need to clean data and cache partition. To do that you need to go to recovery mode.
To do that, turn off the device , hold the power button. First you will see its power on, keep it pressed. And after 5s , you can home sync will rebooted to recovery.
Hi all, I know this is too old subject, but unfortunately I had my homesync flashed firmware through Odin and I did nand erase all, it is now stuck to Samsung homesync logo after booting. I know it is required wipe but how if no recovery is installed into the original firmware? any thought?
XperiaLover said:
Hi all, I know this is too old subject, but unfortunately I had my homesync flashed firmware through Odin and I did nand erase all, it is now stuck to Samsung homesync logo after booting. I know it is required wipe but how if no recovery is installed into the original firmware? any thought?
Click to expand...
Click to collapse
I did it too. Anyone can please help me?
Hi all.
Help me, I can't find PIT file for Samsung Homesync (GT-B9150).
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Varjo said:
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Click to expand...
Click to collapse
You can Try this:
1.) Pull out battery
2.) Put it in again
3.) Press Vol up + home + power
4.) When the Samsung Logo appears let it off
I think you press the Buttons too long.
I had the same problem!
S1ay3r666 said:
I think you press the Buttons too long.
Click to expand...
Click to collapse
i really tried everything, it's not working. btw with i am stuck at the very first image, where it says "samsung Galaxy sII GT-I9300".
i dont think it's just the way i press the buttons because i can reach it on my s1 and s2 without a problem, it's just not working on this device.
could some setting like "nand erase all" in odin help? in other threads there is sometimes mentioned that the internal file system might be screwed up and in those cases a simple odin reflash does not help anymore...
Nand erase will usually hard brick it. Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Click to expand...
Click to collapse
thx, but i already did that (multiple times) and flashing via odin always succeeds. then the phone reboots and is stuck at the first samsung galaxy s.. screen. twice i managed somehow to get into recovery (after flashing cwm6) but it then randomly rebooted.
and i dont think that the power button is stuck because when i am in download mode it is perfectly fine it never reboots itself unexpectedly.
Had a similar issue on my tab2 p3100. It all happened when I tried flashing a custom recovery from rom manager.
A bad flash of anything related to recovery or bootloader could be a probable cause.
I remember a knowledge share on one of the threads describing this issue and as mentioned on it all I had to do is this:
1) switch off the device and plug in the charger. This would light up the display showing you the charging status. The status has to show if at least your bootloader part of the phone is fine.
2) plug out the charger and immediately press the three buttons (home + vol up + power) get into recovery mode. This step has to work and help you get to recovery mode.
***Note : the interval within which this step has to be performed is too short since the display would turn off immediately as soon as you plug out the charger. A bit tricky too so you have to be fast. If this misses getting you into recovery, pull out the battery and put it back again. Repeat step1 and 2 again.
3) upon successfully getting into recovery, perform wipe data, cache and select reboot phone from option available on recovery again.
Allow the device to boot. This could take a while since you have performed a data wipe and may prompt for first time set up.
I was able to restore functionality on my tab after these steps and like ppl learn from their mistakes, I then learnt that recoveries and bootloaders are things that needs to be done with a pc only.
Worth a try if you have tried other alternatives and found no go. may help. Who knows..
all the best.
thats also not working. i tried to get into recovery since two days now...
i also tried the steps from this thread: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
but again, after i flash the cf-root (successfully) the phone does neither boot into recovery by itself nor can i do it by hand...
its crazy... in download mode i can see the model number (GT-I9300) and i thought as long as the model number is there and i can enter download mode there should be a way to recover the device.
but i cannot think of anything to try that i have not done yet
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Click to expand...
Click to collapse
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Varjo said:
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gala...-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..
Hello guys
i don't know if anyone of you faced this before but it's my first time to face this problem
My Galaxy Ace 5830i wass restarting it self so i used Odin and installed the Stock Rom for it, after odin finished and restarted the phone the screen turned to colored lines like in the picture below
anyone can help?
aymanabo said:
Hello guys
i don't know if anyone of you faced this before but it's my first time to face this problem
My Galaxy Ace 5830i wass restarting it self so i used Odin and installed the Stock Rom for it, after odin finished and restarted the phone the screen turned to colored lines like in the picture below
anyone can help?
Click to expand...
Click to collapse
First of all, always post the questions in the respective device thread. S5830 and S5830i are two different devices. Next make sure to post such question in your device's Q/A section. Anyway can you enter Recovery Mode and Download Mode? Try flashing the stock rom again. Also do Wipe data/ factory reset and wipe cache partitions once you flash the stock rom back. Do post the result. Hope I Helped
P.S. Reported to FM to move to right device section.
mahithm said:
First of all, always post the questions in the respective device thread. S5830 and S5830i are two different devices. Next make sure to post such question in your device's Q/A section. Anyway can you enter Recovery Mode and Download Mode? Try flashing the stock rom again. Also do Wipe data/ factory reset and wipe cache partitions once you flash the stock rom back. Do post the result. Hope I Helped
P.S. Reported to FM to move to right device section.
Click to expand...
Click to collapse
First of all. Thank you for your replay
No I can't log into recovery or download mode any more
This lined color screen shows up every time I try log into recovery or download mode or even try to run the device in normal way
By the way, The led flash stay flashing once or twice when device power on and the usual Samsung tone played as if the device is ruining normally
Any ideas
aymanabo said:
First of all. Thank you for your replay
No I can't log into recovery or download mode any more
This lined color screen shows up every time I try log into recovery or download mode or even try to run the device in normal way
By the way, The led flash stay flashing once or twice when device power on and the usual Samsung tone played as if the device is ruining normally
Any ideas
Click to expand...
Click to collapse
I'm assuming this is more of a hardware problem. Better consult the Service Center. Do post the result.
This was happening if you flash s5830 rom on s5830i devices..
I make this error one time and i need go to a service for a JTAG flash..Need restore boot (i think).
aymanabo said:
First of all. Thank you for your replay
No I can't log into recovery or download mode any more
This lined color screen shows up every time I try log into recovery or download mode or even try to run the device in normal way
By the way, The led flash stay flashing once or twice when device power on and the usual Samsung tone played as if the device is ruining normally
Any ideas
Click to expand...
Click to collapse
Flash stock firmware from odin..you are going in odin mode but its not showing becouse of that colours..so what u have to do is..
Switch off your phone then press power+ volume up + volume down button together after that press vol up button and connect your device to pc and see if its showing in odin or not ..if it showing then flash stock firmware from there..after flashing completed remove the battery and go to stock recovery and clear data and cache and reboot your phone..thats it [emoji4]
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
When you say mount it do you mean trying to send the files over through ADB or just mounting the SD card or putting it into download mode?
If its the ADB issue, try to put your tablet into download mode by using the volume key and power button, then download odin and its stock firmware and flash it using odin. Your tablet should restore to factory defaults using that method
If its the SD card then use the method above as it sounds like recovery may have lost it a bit
If you can not put the phone into download mode (which i doubt is the issue you may want to think about a USB jig as they sometimes get past those issues but from your description I doubt its a hard brick as it gets to the logo
2 things you can try!
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
I really new to this, i mean writing to help people, so don't flock me.
First, you say your device still have the recharging lights on when shut down, it tells me it's not only a software error, but some short circuit has happend.
Have you tried a hardreset? search google for your model if you doesn't know how.
From what i can read you still have the CWM Recovery, so download Android-SDK and try flashing the recovery from ADB (Found in platform tools.
Last but most tricky, if nothing helps, you' have to disassemble your device and temporary disable the battery, them press and hold the start button down for 5 sec to remove the poweroverload, reassemble again and try ASB adain, you can't reinstall the recovery directly from the SD
Regards Sc0rpio