Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
When you say mount it do you mean trying to send the files over through ADB or just mounting the SD card or putting it into download mode?
If its the ADB issue, try to put your tablet into download mode by using the volume key and power button, then download odin and its stock firmware and flash it using odin. Your tablet should restore to factory defaults using that method
If its the SD card then use the method above as it sounds like recovery may have lost it a bit
If you can not put the phone into download mode (which i doubt is the issue you may want to think about a USB jig as they sometimes get past those issues but from your description I doubt its a hard brick as it gets to the logo
2 things you can try!
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
I really new to this, i mean writing to help people, so don't flock me.
First, you say your device still have the recharging lights on when shut down, it tells me it's not only a software error, but some short circuit has happend.
Have you tried a hardreset? search google for your model if you doesn't know how.
From what i can read you still have the CWM Recovery, so download Android-SDK and try flashing the recovery from ADB (Found in platform tools.
Last but most tricky, if nothing helps, you' have to disassemble your device and temporary disable the battery, them press and hold the start button down for 5 sec to remove the poweroverload, reassemble again and try ASB adain, you can't reinstall the recovery directly from the SD
Regards Sc0rpio
Related
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
I can wipe cache and partition but nothing change, it keeps rebooting.
I cant use odin because odin didn't see the phone,
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
I am looking for possibilities and solution for 2 days and I cant find any. Please help me.
bootloop
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
anshulmalviya said:
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
Click to expand...
Click to collapse
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
atilim said:
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
You are right, it was computer malfunction. I can use odin now.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
Click to expand...
Click to collapse
I both try 4.1.2 (with odin) and 4.3 (with octopus) but it keeps rebooting.
I also use octopus box to flash and repair efs.
atilim said:
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
Click to expand...
Click to collapse
If you've cleared the partition structure then you've turned a possible soft brick into a hard brick, you'll need a new motherboard now.
Try flashing the rescue firmware, from the thread in general, but I wouldn't hold out any hope.
Sent from my GT-I9300 using Tapatalk
same problem but worse please help
HI guys i have exactly the same problem but my bootloop was caused by installing recovery through the cwm app and then rebooting to recovery through the app. i rebooted to recovery with an app before and it caused this aswell ...however back then my volume down button was working. i fixed it last time by going into download mode and flashing philz recovery however i cant enter download mode or recovery or boot into system.
PS: my phone doesnt boot into recovery it comes up with the samsung galaxy s3 gt 19300 logo then it comes up with the cwm recovery icon in the middle of my screen and 'clockwordmod recovery v6.0.6.4' at the bottom of the screen then restarts itself.
i dont know what to try i have looked around, didnt want to create a new thread just wanted to find out if anyone has any idea of what i can do except for buying a new volume down button thats my last resort apprently its £35 to fix
easy way to fill up you thanks meter guys as any sort of input and advice is extremely appreciated.
alphadavid99 you fried your lcd when you flashed cwm made for note in the other thread.
Hi i have the issue... I am able to get in Recovery and Download Mode.
While in recovery i had formatted the whole internal memory and tried flashing about three AOSP ROMs (Formatting each time before Flashing) but the only result was the endless boot up screen (not boot loop).
Then i tried flashing a sammy ROM and it worked...
Could someone tell me why am I able to flash Sammy ROM but not AOSP (such as ARCHIDROID & SLIMBEAN).
My Model is GT-i9300
Current Modem - XXUGMK6
Current ROM - S4 Revolution ROM (TM)
Thanks in advance for your time if someone has any suggestions
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
dinho10r said:
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
Click to expand...
Click to collapse
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
cglegion said:
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
Click to expand...
Click to collapse
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
dinho10r said:
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
Click to expand...
Click to collapse
Correct. Put the TWRP zip on your external and flash it normally via recovery mode such as CWM not the android 3e recovery. Or find an odin flashable zip for yoyr device.
I am very sure there is one for I9100 because I ran into the exact same problem before and managed to figure it out. You just have to search for it can't give you a link because I'm on mobile now.
You need to root your phone in order to install a new recovery such as TWRP/CWM or even flash new kernel and ROM.
Good luck.
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Varjo said:
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Click to expand...
Click to collapse
You can Try this:
1.) Pull out battery
2.) Put it in again
3.) Press Vol up + home + power
4.) When the Samsung Logo appears let it off
I think you press the Buttons too long.
I had the same problem!
S1ay3r666 said:
I think you press the Buttons too long.
Click to expand...
Click to collapse
i really tried everything, it's not working. btw with i am stuck at the very first image, where it says "samsung Galaxy sII GT-I9300".
i dont think it's just the way i press the buttons because i can reach it on my s1 and s2 without a problem, it's just not working on this device.
could some setting like "nand erase all" in odin help? in other threads there is sometimes mentioned that the internal file system might be screwed up and in those cases a simple odin reflash does not help anymore...
Nand erase will usually hard brick it. Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Click to expand...
Click to collapse
thx, but i already did that (multiple times) and flashing via odin always succeeds. then the phone reboots and is stuck at the first samsung galaxy s.. screen. twice i managed somehow to get into recovery (after flashing cwm6) but it then randomly rebooted.
and i dont think that the power button is stuck because when i am in download mode it is perfectly fine it never reboots itself unexpectedly.
Had a similar issue on my tab2 p3100. It all happened when I tried flashing a custom recovery from rom manager.
A bad flash of anything related to recovery or bootloader could be a probable cause.
I remember a knowledge share on one of the threads describing this issue and as mentioned on it all I had to do is this:
1) switch off the device and plug in the charger. This would light up the display showing you the charging status. The status has to show if at least your bootloader part of the phone is fine.
2) plug out the charger and immediately press the three buttons (home + vol up + power) get into recovery mode. This step has to work and help you get to recovery mode.
***Note : the interval within which this step has to be performed is too short since the display would turn off immediately as soon as you plug out the charger. A bit tricky too so you have to be fast. If this misses getting you into recovery, pull out the battery and put it back again. Repeat step1 and 2 again.
3) upon successfully getting into recovery, perform wipe data, cache and select reboot phone from option available on recovery again.
Allow the device to boot. This could take a while since you have performed a data wipe and may prompt for first time set up.
I was able to restore functionality on my tab after these steps and like ppl learn from their mistakes, I then learnt that recoveries and bootloaders are things that needs to be done with a pc only.
Worth a try if you have tried other alternatives and found no go. may help. Who knows..
all the best.
thats also not working. i tried to get into recovery since two days now...
i also tried the steps from this thread: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
but again, after i flash the cf-root (successfully) the phone does neither boot into recovery by itself nor can i do it by hand...
its crazy... in download mode i can see the model number (GT-I9300) and i thought as long as the model number is there and i can enter download mode there should be a way to recover the device.
but i cannot think of anything to try that i have not done yet
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Click to expand...
Click to collapse
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Varjo said:
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gala...-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..
Had a problem with my htc one m8, so i pulled out my i9100 backup phone.
it had neat rom 4.1.2 on it, and everything was working fine.
i have tried to flash onmi rom():
1. entered recovery mode
2. backed up CWM to external SDCARD.
3.flased "CWM-KitKatCompatible-i9100.zip" & rebooted into new recovery.
4.installed "omni-4.4.2-20140214-i9100-INFECTED.zip".
5.installed "pa_gapps-modular-micro-4.4.2-20140207-signed.zip"
6.installed "UPDATE-SuperSU-v2.46.zip".
after that, when i wanted to reboot, i got a message saying i could loose su and if i want to fix it, i choosed "NO".
device entered to a boot loop.
i tought no biggy, i would go back to recovery, flash philz CWM and recover my nandroid backup.
it will not get into recovery mode.
tried again, pulled the battery, put it back, hold down VOL-Down+home+power button, and nothing, boot loops over and over again.
tried to get into download mode, not going there as well.
connecting to a pc with ADB+samsung drivers, the device wont show up.
Any suggestions? did i bricked the phone forever?
K-a-M-u-Z-u said:
Had a problem with my htc one m8, so i pulled out my i9100 backup phone.
it had neat rom 4.1.2 on it, and everything was working fine.
i have tried to flash onmi rom():
1. entered recovery mode
2. backed up CWM to external SDCARD.
3.flased "CWM-KitKatCompatible-i9100.zip" & rebooted into new recovery.
4.installed "omni-4.4.2-20140214-i9100-INFECTED.zip".
5.installed "pa_gapps-modular-micro-4.4.2-20140207-signed.zip"
6.installed "UPDATE-SuperSU-v2.46.zip".
after that, when i wanted to reboot, i got a message saying i could loose su and if i want to fix it, i choosed "NO".
device entered to a boot loop.
i tought no biggy, i would go back to recovery, flash philz CWM and recover my nandroid backup.
it will not get into recovery mode.
tried again, pulled the battery, put it back, hold down VOL-Down+home+power button, and nothing, boot loops over and over again.
tried to get into download mode, not going there as well.
connecting to a pc with ADB+samsung drivers, the device wont show up.
Any suggestions? did i bricked the phone forever?
Click to expand...
Click to collapse
Are you sure that the phone doesn't boot into the download mode(Vol Up+Powe+Home) ??
If that's the case, then I'm afraid that your phone is hard bricked forever. You have to fix/replace the motherboard then(about $50). You can go to the service center and get it done, or check out this video(JTAG METHOD): https://www.youtube.com/watch?v=zN7le4GmxZs
I hope something works out for you.
Regards
warrior1208 said:
Are you sure that the phone doesn't boot into the download mode(Vol Up+Powe+Home) ??
If that's the case, then I'm afraid that your phone is hard bricked forever. You have to fix/replace the motherboard then(about $50). You can go to the service center and get it done, or check out this video(JTAG METHOD): https://www.youtube.com/watch?v=zN7le4GmxZs
I hope something works out for you.
Regards
Click to expand...
Click to collapse
yes, i'm sure :'( its not my first time with the device.
i have ordered a usb jig from ebay, maybe it will force the device into download mode...if not... :\
just got my USB jig i have ordered from ebay(less than a dollar), plugged it to the phone, and it got into download mode!
used odin to flash stock rom, and then installed cyanogenmod with the cm installer.
everything is working fine!
I know this is late, but I wanna ask a question. Firstly I'm happy that your bricked phone came back to life(like how many years ago).
Can a USB jig work on any other phone brand other than Samsung phones? Can it be used for tecno, infinix, and all that? Or it is dedicated to only Samsung mobiles?
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls