I had already looked into the other thread, but i have different issues.
I installed xrecovery0.3_GBready ( the fixed version by Z )
and then flashed WB 4.0
Then i can't install any patches.I always get :
"Can't open pacakege filepath/filename.zip(bad)
Installation Aborted"
I'm also facing a similar problem with ThJap's ROM!!
Since my problem is similar, I thought of posting it here.
I'm on locked bootloader and my xRec version is 0.3.
I have installed many ROMs and they work fine!
Its just that when I try to install ThJap's ROM in xRec I get the following error:
--Installing: SDCARD:MaXtoR/ThGo2_v7.0.zip
Finding update package...
Opening update pakcage...
E:Can't open /sdcard/MaXtoR/ThGo2_v7.zip
(bad)
Installation aborted.
Even re-downloading the file didn't help!
Any solutions?
Related
everytime i run the RUU program it gets almost through then an error pops up and says
error 130 model ID incorrect.
ive followed this guide to downgrading and doesnt seem to be working
http://theunlockr.com/2009/10/18/how-to-downgrade-your-htc-hero-so-it-can-be-rooted/
any help would be greatly appreciated
When does that come up? Is it the goldcard method your using? Did you check if your goldcard had worked?.... Use BTDAGs guide linked in my signature.
ok so it got past the goldcard and worked from there.. went thru the root procedure and got to the custom ROM. started to load villainROM and installation aborted.
this is what i see
install from sdcard...
finding update package...
opening update package...
E:can't open /sdcard/villainROM10.2-Full-signed.zip
(bad)
Installation aborted.
silver2kgti said:
ok so it got past the goldcard and worked from there.. went thru the root procedure and got to the custom ROM. started to load villainROM and installation aborted.
this is what i see
install from sdcard...
finding update package...
opening update package...
E:can't open /sdcard/villainROM10.2-Full-signed.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
Probably just a bad download. Do it again
did it again... same thing. when i went to wipe the sd:ext partition i get
error : Run 'wipe ext' via adb.
WTF!? should i find another ROM? or is there an underlying problem?
Hi,
I'm a noob with CM9, after a lot of months reading posts (since august), i try to install it following the steps. I install the resurrection edition from Odin, gapps, and then i update it to the last nightly...
But i have a problem with CWM and CM9.
When i reboot into recovery to install some zip signed (as modems or gps patch), i can't install it, i have a signature error.
I try to install it with and without signature verification, but it's the same:
HTML:
toggle signature verification
Signature Check: Enabled
GPS_patch_CM9.zip
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted
========================
toggle signature verification
Signature Check: Disabled
GPS_patch_CM9.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/xxx/GPS_patch_CM9.zip (bad)
Installation aborted
I have ROM manager 5.0.0.6 that comes with CM9, but if i try reboot into recovery in rom manager, it runs ClockworkMod Recovery v4.0.15, and if i try to reboot into recovery using the CM9 option (hold button->reboot->recovery), it runs CWM-based Recovery v5.5.0.4.
The md5sum of the signed zips files are ok.
Someone can help me?
Thansk
P.S.: Sorry for my english
might be a problem with the current build you are using, update to the latest build it will be solved.
bala_gamer said:
might be a problem with the current build you are using, update to the latest build it will be solved.
Click to expand...
Click to collapse
Hi,
i think so, but it's strange, because i only flash my phone with the resurrection (includes a full flash) and a nigthly (and this nightly is ok).
I'll re-flash with the latest resurrection edition of CM9, and i hope it'll be solved, because i don't know what can i do...
Hi,I try now to reinstall the resurrection CM9, and i put now the zip files in the internal SD.
All ok.
Maybe the problem was install zip files from internal memory?
Regards
Im on resurection 1.5 and want to update to 1.8.1
But this happends.
Opening update package...
Installing update...
Assets failed. Getprop ("ro.something.device")
E error (status 7)
Installation aborted
Errrr what to do?
Regards Rune
try redownload the rom, might be a bad download
Status 7 usually happens when you're trying to flash something for the wrong device.
Hi!
i got an error when i try to installl this new version Hypermax v8
Finding update package...
Opening update package...
Installing update...
Warning: No file_contexts
Samsung Galaxy S3 GT-I9300
Hypermax
Version 8
Flashing, please wait...
set_metadata_recursive: some changes failed
E: Error in /external_sd/Hypermax v8/Hypermax+v8.zip
(Status 7)
Installation aborted
Also i download V7 and V3... is the same problem.
Thanks for your help!
krathos said:
Hi!
i got an error when i try to installl this new version Hypermax v8
Finding update package...
Opening update package...
Installing update...
Warning: No file_contexts
Samsung Galaxy S3 GT-I9300
Hypermax
Version 8
Flashing, please wait...
set_metadata_recursive: some changes failed
E: Error in /external_sd/Hypermax v8/Hypermax+v8.zip
(Status 7)
Installation aborted
Also i download V7 and V3... is the same problem.
Thanks for your help!
Click to expand...
Click to collapse
Install latest recovery Cwm,PhilZ or Twrp these errors normally happen with outdated recoveries.
Thanks
But did not work.
I installed the last version of CWM but i got the same error
krathos said:
Thanks
But did not work.
I installed the last version of CWM but i got the same error
Click to expand...
Click to collapse
Try PhilZ Touch Recovery, I never use anything else now.
RazorMC said:
Try PhilZ Touch Recovery, I never use anything else now.
Click to expand...
Click to collapse
Thanks!
works fine with Philz Touch 6.19.2
status 7 error
hi there...
i'm having the same problem trying to install Hypermax V9... Always getting the status 7 error..
I've wipe all the data and cache... but still geting the error...
I've install the philz_touch_6.41.6-i9300 and still having problems...
can anyone help me please?
I am using the moto g falcon (xt1032). I am using CWM for the moto G the latest one from their website. First I could not mount system however if I format it I can.
I have wiped and formatted all the other data as well in-case it helps. I tried to install the CM12 rom from here:
http://forum.xda-developers.com/moto-g/development/5-0-cyanogenmod-12-t2950466
and also here:
http://forum.xda-developers.com/moto-g/development/cm12-t2971886
using sideload returning the following dialog:
restarting adbd...
Finding update package...
Opening update package...
Installing update...
E : Error in /tmp/update.zip
(Status 1)
installation aborted
Pushing the file on gives a very similar error of:
Finding update package...
Opening update package...
Installing update...
E : Error in /data/media/cm-12-20150112-UNOFFICIAL-falcon.zip
(Status 1)
I have also tried TWRP which returns:
E:Error executing updater binary in zip '/data/media/0/sideload.zip
Thanks in advance for any help, I have spent hours looking for solutions however status 1 is the most rare error.
I have re-downloaded it a few times, in-case it was a bad download.
Same ERROR!!!
Do you can install CM12??
No solution yet
No I have given up on the phone till someone can help on the thread, my only guess was it was something to do with a broken memory chip, have no sign of it before flashing the ROM though.
Here is other guys whit same problem.....
http://forum.xda-developers.com/mot...cm12-nightlies-status-1-t3008378#post58532217
if you try any solution, please let me know
Pd. Sorry for my bad english... my from is Argentina