Hi !
All in title.
How can i save my baseband N_01.86.00R from Intl 1000 Bell (ORFR in fact) ?
not in SBF but in CWM to protect my phone
Where can i found Radio 01.77.30P for Bell !! (mine of course) ?
I have found 01.100.00R ORFR, but have 1 bar bug
Information : I have 01.86.00 and this radio have hard heat... and drain a lot... Work fine too.
After extract, of course, i give Radio for anyone want.
Thx for help.
no one can help me ?
Related
As the thread title, does anyone know what the original Orange UK radio was? (The updated one which fixed call quality?)
I am using KevinPwhite's ROM but I still have call quality issues but this ROM uses 0300.76. I like the ROM though so I was going to cook my own Radio in however I have no idea what the original is! Ideally need the answer ASAP because the phone's warranty runs out soon
I am guessing it's 5000.167? Anyone confirm this?
Found it:
build 218765072
software version 5005.0001.76
radio version 5001.0001.76
N ow on to figure out how to remove the radio and replace!
BiG K said:
As the thread title, does anyone know what the original Orange UK radio was? (The updated one which fixed call quality?)
I am using KevinPwhite's ROM but I still have call quality issues but this ROM uses 0300.76. I like the ROM though so I was going to cook my own Radio in however I have no idea what the original is! Ideally need the answer ASAP because the phone's warranty runs out soon
I am guessing it's 5000.167? Anyone confirm this?
Found it:
build 218765072
software version 5005.0001.76
radio version 5001.0001.76
N ow on to figure out how to remove the radio and replace!
Click to expand...
Click to collapse
Your guess is correct, 5001.76 is the radio version used on the orginal Orange ROM.
If you are going to replace the radio, 5001.0300.76 is the best radio to use in the UK if you ask me.
Instructions for changing radio can be found on here using tgtool which is quite straightforward.
Hi,
I have a french orange branded Atrix running under ORFR 2.3.4 and will most likely flash RedPill as soon as it gets in V4. I haven't changed the Radio yet, so I'd like to know
1) what radio would fit the best ?
2) is it safe to flash it ?
3) Can Intl and ATT users flash the same radios ?
We're having more and more ROMs but there's not much information about the radios, and I have to say that I'm starting to get lost with all those hardbrick problems...
Thanks for your help
Envoyé de mon Motorola Atrix
First off I'd recommend alien or picrust
But really, I would suggest trying the bell radio here first, then the ATT radio if that does not work.
It is safe to flash the radios found here.
http://forum.xda-developers.com/showthread.php?t=1163009
1) Try bell, then ATT (and speedtest). If that fails, use the telestra radio
2) Yes (if it is extracted from an update ie. only 10-30mb in size)
3) Yes
Cheers
Ok I'll try the Bell when I'll flash a new rom. Thanks for the information !
I just installed cherry pie rom no crust and im not using an overclocked kernel but now im only getting on bar of signal im using radio n 1.97.00r which I believe is the correct radio also have flashed just about every rom their is don't know if it has anything to due with it some help would be much appreciated
Yes this radio is not recommended to use, got problems like this one bar issue, it's a leaked radio.
Use this radio , the official radio from AT&T to GingerBread system :
http://forum.xda-developers.com/showthread.php?t=1163009
But, i don't know about radio downgrade .. didn't try it .
So wait for someone to confirm that it is safe.
Thanks for the response not sure about downgrading either will wait for reply if I go for it ill post results
I just flashed that radio using cam and prob solved no issues
Use cwm recovery downgrad ok !
i use a samsung gt i5801 galaxy apollo. on uk orange network. i want to change my rom. but the one i want to use is based on asian firmware. my question is will this work on my phone?
Depends on exactly how different it is. If it's built for a different radio technology (GSM or CDMA) then you shouldn't try it.. if the Asian device has any different hardware or no English language pack then you shouldn't use it.
so in that case. can anyone recommend a better rom for my hardware. if you need any specific handset information i can provide it?
Try googling for it, to start, here is a thread:
http://forum.xda-developers.com/showthread.php?t=1283460
Every Android rom contains all the language files, so the only concern is whether this foreign rom would work with the network of your mobile operator.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
im having real problems finding anything useful. i will include my hardware info, hopefully someone could help me?
Model - gt-i5801
firmware ver - 2.2
baseband ver - i5801bvjp1
kernel version - 2.6.32.9 [email protected] #1
build number - froyo.bvjp1
I see sammobile only has one for europe and one for asia, what did you have in mind?
i need something that doesnt chew my battery up so much. and also something that doesnt freeze up all the time. any ideas?
well i took the plunge and i flashed my first custom rom kyrillos v9.0 jpu with g3mod kernel. works great takes some getting used to though. thanks for all your help. Now updated to 9.5. works wonderfully.
Hi Everyone,
I am facing really weird issue with my Motorola Defy+ having Android 2.3.6
I had Android 2.3.4 installed on my defy+ which came with factory packing. Last week I was playing around with my cell with romtoolbox pro and broke something and found the "infamous" error which made me stuck on bootlogo. So I had to flash. So I flashed it (using RSD lite) with sbf DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf
It worked like a charm. Now only but major problem I'm facing is that I'm just not able to get a signal for my sim which is Vodafone India. When I insert other sim like Airtel, it works pretty well. After going through so many threads, posts, comments, hints, I just couldn't fix this issue. So can anyone of you please get this n00b out of this problem?
I'm really frustrated at the moment
I wanna use Baseband switcher, but I can't cause it's not possible to use without root!! And as we know Android 2.3.6 defy+ is "Unrootable".
I also tried to switch back to 2.3.4 but it was all in vain.
No success!! Just no success!!
I tried other sbf files such as DFP-1321, DFP-139, DFP-2311, DFP-2312, etc etc.
If it is Android 2.3.6 then I don't find any signal for my Vodafone India ****.
If it is Android 2.3.4 then I'm just not able to flash it. All I get it is black screen.
I apologize, if my post it too long. I hope I made my problem and myself clear in it. Please help me!
Edit: Mods, please modify the thread title as I failed to add [Q] in it at the beginning.
BUMP!!!!
Nobody? :S
Edit: Fixed!!!!!
Installed SBF for Asia region and it's up and running.
No signals in vodafone sim
mahi_j87 said:
BUMP!!!!
Nobody? :S
Edit: Fixed!!!!!
Installed SBF for Asia region and it's up and running.
Click to expand...
Click to collapse
Hey, I'm having same issue with my vodafone sim. Its I've tried bbsV4.0mlV0.7 but no luck
Can you please send me a link for SBF for Aisa region? :angel: