I installed this application "ROM Manager " from android market .
then did "back up current rom" option.
Due to this phone got stuck .. and got stuck at LG logo.
black screen saying
" fast boot mode started
udc_start ()"
with black screen
Please help.
forum.xda-developers.com/showthread.php?t=1088046
Sent from my LG-P500 using xda premium
deepak242003 said:
I installed this application "ROM Manager " from android market .
then did "back up current rom" option.
Due to this phone got stuck .. and got stuck at LG logo.
black screen saying
" fast boot mode started
udc_start ()"
with black screen
Please help.
Click to expand...
Click to collapse
Follow the link provided by sweetnsour above. Please note that ROM manager has some issues and I faced the same issue which you're facing. Use ROM manager only to flash the clockworkmod recovery. Once you've installed the recovery, you can do your backups/flashing from the recovery itself. And you can even uninstall ROM manager forever, as the recovery flashing is an one-time job. Its easier to use the recovery.
gkarthik16 said:
Please note that ROM manager has some issues and I faced the same issue which you're facing. Use ROM manager only to flash the clockworkmod recovery. Once you've installed the recovery, you can do your backups/flashing from the recovery itself.
Click to expand...
Click to collapse
It does the same even on recovery install; have commented on this numerous times. Broken by design.
dr.notor said:
It does the same even on recovery install; have commented on this numerous times. Broken by design.
Click to expand...
Click to collapse
Oh I didn't know that coz the first time I installed the recovery, it was successful and after that when I faced the issue with backing up the ROM, I kicked ROM manager into the trash can and never used it
Related
Rooted the phone, installed ROM Manger, installed CWM from RM, selected version for Samsung Galaxy 2 AT&T.
Backed up the ROM
Went back into CWM to do a manual check and now CWM does nothing. I can navigate through itand select tasks, but that just talkes me to a screen wth the tophat logo.
Remove battery and phone boots into CWM with the same problems.
This has just got to be in the FAQ.
ROM Manager is not compatible with the SII at this point.
If you can still get into download mode and/or recovery, you are fine.
donalgodon said:
This has just got to be in the FAQ.
ROM Manager is not compatible with the SII at this point.
If you can still get into download mode and/or recovery, you are fine.
Click to expand...
Click to collapse
It goes into recovery mode; I get the CWM-based Recovery v5.0.2.3 menu
I can navigate in the menu and select any choice.
Nothing happens.
You can install the CWM recory with odin.
Thank you so much for uploading this update
I am sure you didn't try this update before posting here..Q&A...
my phone is bricked while flashing your CWM 7 (2.3.7).
if someone wants to stand behind next to me then [ FLASH IT ]..
Otherwise IGNORE this thread I repeat IGNORE this thread..
Huuummm.. not good..
I finally got CWM to respond and it rebooted the phone properly. ROM Manger has been removed.
That was an exciting couple of hours...
Rom manager is.compatible but you need to use a compatible kernel. Clockwork kernel for an example
Sent from my GT-I9100 using XDA App
Stop using ROM Manager on the SGS2!
Chasmodai said:
Rooted the phone, installed ROM Manger, installed CWM from RM, selected version for Samsung Galaxy 2 AT&T.
Backed up the ROM
Went back into CWM to do a manual check and now CWM does nothing. I can navigate through itand select tasks, but that just talkes me to a screen wth the tophat logo.
Remove battery and phone boots into CWM with the same problems.
Click to expand...
Click to collapse
Rom manager, forget it, it can screw the phone and the cwm boot.
Sent from my GT-I9100 using xda premium
Hello all,
Yesterday I have Installed ClockworkMod Recovery v.5.8.1.5, on samasung galaxy s2 and while chceking its options available i accidently clicked the rebot recovery option in advanced, it stated rebooting i suppose the numbers are going on so i shutdown the phone and when i restarted in recovery mode it is showing old recovery not the new CWM touch, i reinstalled it again itworks but whenever i am going in recovery mode i have to install CWM. Today i again done rebot recovery thinking it will solve the problem but it is showing numbers going on, please help me.
Thanks
Rom Manager
By any chance are you installing it with Rom Manager?
scayre32 said:
By any chance are you installing it with Rom Manager?
Click to expand...
Click to collapse
After installing CWM i have installed ROM Manager Premium v5.0.0.8
How did you actually install Recovery?
Sent from my Galaxy S2 GT i9100
I would advise against using Rom Manager.Ive tried to boot into recovery from there on 2 phones and it freezes,whether I dont use it properly or it wipes out my cwm install I dont know,but it did.Then I had a hell of a job flashing stock>rerooting>getting my nand backup cos I needed custom recovery.
I was thinking it was when you use it to download a recovery option and it wipes out/overwrites the working one you had.
Exactly
theunderling said:
I would advise against using Rom Manager.Ive tried to boot into recovery from there on 2 phones and it freezes,whether I dont use it properly or it wipes out my cwm install I dont know,but it did.Then I had a hell of a job flashing stock>rerooting>getting my nand backup cos I needed custom recovery.
I was thinking it was when you use it to download a recovery option and it wipes out/overwrites the working one you had.
Click to expand...
Click to collapse
Rom Manager doesn't behave well with the s2. It will give you the recovery you download through it but reverts back to your previous recovery when you next boot up.
I'd say stop using it now.
I did find a lot of threads but i didnt get any answer to my question.
I was using a 2.3.6 stock Atrix 4G. I decided on getting the cm9 so i unlocked the bootloader using the following link http://forum.xda-developers.com/showthread.php?t=1182871
as i am using the newer version so i was advised to run option 1 of the script( click the link to see the script) and then option 3. I did option 1 and then my phone got stuck in unable to boot and then i ran option 3 and just pressed enter and my phone booted. So i didnt advance on the script and closed the script. Now my phone says UNLOCKED at the m logo while booting.
And then for rooting i used the following link http://forum.xda-developers.com/showthread.php?t=1769497
i did get some errors while using the coding( as i had typo error) but then after two reboots and trying i got the success on my cmd window.
but i didnt get the same command promt text as upndwn4par( see the link) got. Still i anyhow got success. I checked my apps and super user was indeed sitting there.
After unlocking and rooting i downloaded rom manager and also downloaded cm9.zip file into my sd. Then pressed flash CWM and then also made a backup for my stock ROM and then pressed download from sd card on rom manager , then it asks cleear cache dalvik and backuo. I checked all and then my phone reboots and gets stuck in the ANDROID GUY with an Exclamation mark inside a triangle. I also tried reboot with recovery in ROM manager but the same screen.
I have mentioned all my steps. So please guide me where or what am i doing wrong?
please help , cause moto ditched me and i want to ditch moto's software.
aka007 said:
I did find a lot of threads but i didnt get any answer to my question.
I was using a 2.3.6 stock Atrix 4G. I decided on getting the cm9 so i unlocked the bootloader using the following link http://forum.xda-developers.com/showthread.php?t=1182871
as i am using the newer version so i was advised to run option 1 of the script( click the link to see the script) and then option 3. I did option 1 and then my phone got stuck in unable to boot and then i ran option 3 and just pressed enter and my phone booted. So i didnt advance on the script and closed the script. Now my phone says UNLOCKED at the m logo while booting.
And then for rooting i used the following link http://forum.xda-developers.com/showthread.php?t=1769497
i did get some errors while using the coding( as i had typo error) but then after two reboots and trying i got the success on my cmd window.
but i didnt get the same command promt text as upndwn4par( see the link) got. Still i anyhow got success. I checked my apps and super user was indeed sitting there.
After unlocking and rooting i downloaded rom manager and also downloaded cm9.zip file into my sd. Then pressed flash CWM and then also made a backup for my stock ROM and then pressed download from sd card on rom manager , then it asks cleear cache dalvik and backuo. I checked all and then my phone reboots and gets stuck in the ANDROID GUY with an Exclamation mark inside a triangle. I also tried reboot with recovery in ROM manager but the same screen.
I have mentioned all my steps. So please guide me where or what am i doing wrong?
please help , cause moto ditched me and i want to ditch moto's software.
Click to expand...
Click to collapse
Do i need to install CWM Recovery sperately onto my phone. As in i have installed ROM manager. Do i need to install cwm recovery also.
In flash CWM recovery it says current recovery 5.0.2.0.
guys please help
aka007 said:
Do i need to install CWM Recovery sperately onto my phone. As in i have installed ROM manager. Do i need to install cwm recovery also.
In flash CWM recovery it says current recovery 5.0.2.0.
guys please help
Click to expand...
Click to collapse
You have posted this question 5-6 times. Spamming the forum is not allowed.
I don't think recovery is installed properly. Try to fastboot flash recovery.
http://forum.xda-developers.com/showthread.php?t=1905222
upndwn4par said:
You have posted this question 5-6 times. Spamming the forum is not allowed.
I don't think recovery is installed properly. Try to fastboot flash recovery.
http://forum.xda-developers.com/showthread.php?t=1905222
Click to expand...
Click to collapse
Can i install the recovery using rom manager. What i did was download the Recovery from the link you provided and then put it into my internal and then flash the cwm ad then it flashed. then i did install rom from sd card , i seleted the cm9 then selected backup and all. I did a little of installation and now its stuck in the boot screen for 30+ mins.
aka007 said:
Can i install the recovery using rom manager.
Click to expand...
Click to collapse
I would recommend using fastboot.
aka007 said:
I did a little of installation and now its stuck in the boot screen for 30+ mins.
Click to expand...
Click to collapse
What do you mean "did a little of installation"? You either install or you don't...
ravilov said:
I would recommend using fastboot.
What do you mean "did a little of installation"? You either install or you don't...
Click to expand...
Click to collapse
sorry, i must have got crazy thinking i bricked my phone. Started praying and all.
But now, Thank God i did install the cm9 with a help of many people. I got help from random posts and all. Now my problem is what version of gaaps do i install.
i already have this version in my computer gapps-ics-20120429-signed.zip (dont know where i downloaded it from)
but in http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps it shows the version below
gapps-ics-20120317-signed.zip
Hello All,
I have vibrant which is runing on 2.2 and I want to root it and update it. I have successfully root it via superoneclick and install rom manger from play store. I have select flash clockworkmod recover option like in image 01 as when i m trying to click samsung galaxyS Vibrant option nothbut ing was happening. so I clicked second option and it shows some progress and then give me successfully installation msg. Then I clicked to reboot into recovery but it will take me to the stock recovery like image 03 and when I clicked reinstall packages it gives me error like image 04 also when I tried to install clockworkmod recovery via other devices which are not in list it will give me msg like image 05. I have tried both method but I am unable to go in to clockworkmod recovery. Can any one help into this that how I will fix this thing ?
Thanks in advance
more images
guys I have found one solution for the issue on:
http://forum.xda-developers.com/showthread.php?t=833423
I tried it but after doing this when I go to stock recovery and click on reinstall packages phone will restart and boot into stock recovery again any help ?
imk79 said:
guys I have found one solution for the issue on:
http://forum.xda-developers.com/showthread.php?t=833423
I tried it but after doing this when I go to stock recovery and click on reinstall packages phone will restart and boot into stock recovery again any help ?
Click to expand...
Click to collapse
The easiest way is to use the update.zip boot into stock recovery and keep hitting reinstall packages I normally have to do it three or four times. Make sure you have a new ROM to flash so that when it goes into clockwork finally you can flash it and keep root. If you don't flash a new ROM it will automatically take you to stock recovery every time you try to reeboot recovery
Sent from my SGH-T959 using xda app-developers app
ok after spending full day I am able to flash this rom on my vibrant:
http://forum.xda-developers.com/showthread.php?t=1900590
but the first issue which I faced is that battery drain out very quickly ? Do I need to hard rest it at least once after flashing the rom ?
imk79 said:
ok after spending full day I am able to flash this rom on my vibrant:
http://forum.xda-developers.com/showthread.php?t=1900590
but the first issue which I faced is that battery drain out very quickly ? Do I need to hard rest it at least once after flashing the rom ?
Click to expand...
Click to collapse
Question is which ROM are you using
Sent from my SGH-T959 using xda app-developers app
how do I check this ? I have downloaded the zip from the link which I have added in previous post its based on 4.1.
Go to settings>about phone.
BTW, you are running an old, no longer supported version of miui.
Also I wouldn't use ROM manager at all.
Eat Play Google
Hi,
I have a rooted galaxy S2 on stock with the SuperSU application. I updated the SuperSU application today and when I opened it, it advised me to update the binary. I selected the option to update the binary via CWM (as that's my recovery tool). My phone then tried to reboot but is now stuck on the splash screen, I have access to ODIN mode which currently says CUSTOM BINARY DOWNLOAD: Yes (1 counts) but no access to CWM.
Please could anyone help? I have a feeling I would need to flash the kernel but am not really sure what the best way to fix this is. If possible I would like to keep all my data intact.
Any help is appreciated
Also apologies if I have posted this to the wrong section.
Thanks
peshmann said:
Hi,
I have a rooted galaxy S2 on stock with the SuperSU application. I updated the SuperSU application today and when I opened it, it advised me to update the binary. I selected the option to update the binary via CWM (as that's my recovery tool). My phone then tried to reboot but is now stuck on the splash screen, I have access to ODIN mode which currently says CUSTOM BINARY DOWNLOAD: Yes (1 counts) but no access to CWM.
Please could anyone help? I have a feeling I would need to flash the kernel but am not really sure what the best way to fix this is. If possible I would like to keep all my data intact.
Any help is appreciated
Also apologies if I have posted this to the wrong section.
Thanks
Click to expand...
Click to collapse
Sorry to persist, but has anyone got any suggestions on how to fix this? I'm on Jeboo kernel v1.2, stock JB firmware.
Thanks
Same problem for me, I updated the last version of SU and try to update binary choossing cmw/trwp. Now I have a bootlopp. onece it started few seconds after the phone reboot again and again.
peshmann said:
Sorry to persist, but has anyone got any suggestions on how to fix this? I'm on Jeboo kernel v1.2, stock JB firmware.
Thanks
Click to expand...
Click to collapse
Same problem for me. In download mode I flashed a stock jb rom, siyah kernel, then I restored the backup from cwm.
Sent from my GT-I9100 using xda app-developers app
chrisXL said:
Same problem for me. In download mode I flashed a stock jb rom, siyah kernel, then I restored the backup from cwm.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
After a few hours of struggling, I managed to get my phone back up and running.
All I did was flash the kernel with a Stock one eg. Philz (as I have stock JB firmware). Once flashed my phone booted up.
However I do have a issue with the SD card now, apps which were installed on my SD card were all greyed out even though I can access the data such as music and films off the card. Slightly strange. I did try mounting and unmounting, as well as reboot and that didn't help.
Considering downloading the apps again and simply moving to SD card and see if that works rather than an uninstall and reinstall.
SuperSU 1.86 binary update
Hi, i using HTC ONE with ARHD31.6 stock kernel. Also i have encountered bootloop issue after i did a update for superSU from v1.8 to v1.86. Tried both options and it stills resulted to bootloop. So far havent been able to find a solution for this so other then restored back to my previous backup.
Hi,
I have a rooted galaxy S2 on stock with the SuperSU application. I updated the SuperSU application today and when I opened it, it advised me to update the binary. I selected the option to update the binary via CWM (as that's my recovery tool). My phone then tried to reboot but is now stuck on the splash screen, I have access to ODIN mode which currently says CUSTOM BINARY DOWNLOAD: Yes (1 counts) but no access to CWM.
Please could anyone help? I have a feeling I would need to flash the kernel but am not really sure what the best way to fix this is. If possible I would like to keep all my data intact.
Any help is appreciated
Also apologies if I have posted this to the wrong section.
Thanks
Click to expand...
Click to collapse
I had the same problem (bootloop issue) on my Samsung win I8552 and I solved that reinstalling CWM trought ODIN :
1. First be sure USB Debugging is checked in ur device ( Settings>Developer Options>USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release
Power Button but keep pressing left ones. You should have a triangle with an android janitor while it's saying downloading ..
VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.(CWM Recovery)
7. Dont check any option (F.reset time and Auto reboot are checked by default) So just uncheck Auto Reboot.
8. Now click Start.
9. When it's finished, it should say that "Res OK" in Odin..
10. Now remove ur USB and remove ur battery and put it back and power on your phone.
It must work now!
:highfive:
SuperSU Binary Update Boot problem
I have a rooted galaxy S2 using jeboo kernel and SuperSU application. I updated the SuperSU application today and when I opened it, it advised me to update the binary. I selected the option to update the binary via CWM. My phone then tried to reboot but is now stuck on the splash screen, I have access to ODIN mode which currently says CUSTOM BINARY DOWNLOAD: Yes (1 counts) but no access to CWM.
Please could anyone help
Try to reinstall a kernel via odin then reboot.
Sent from my GT-I9100 using XDA Free mobile app
I know this is an old topic, but the recent supersu update caused my phone to get stuck during booting:
The new update came over the playstore, it asked me to update the app. After that it said that the Super User Binary needs to be updated. I chose the option that does the update process in the CWM recovery.
Then this happend:
System shuts down, boots, I see that some kind of black screen gets displayed(softkeys on and the display stays blank), then it reboots and stops the boot on the Galaxy S2 splash screen. Now that I didnt even get to the samsung splash screen I flashed the Apolo Kernel as an tar file through odin
after that I was able to get one step further and was able to get the Samsung splash Screen but the Splash screen keeps on repeating over and over but after that I also had my recovery back.
Now I tried to Install SuperSU 2.16 as zip in the recovery. but the endless samsung screen persited. After that I used the 2.15 Beta file. but this didnt work either.
I also fixed permissions wiped cache & dalvic cache
Why wouldnt my system boot after the first initial update and how can I finally fix the boot "loop"?
Thank you very much guys!
Heraku said:
I know this is an old topic, but the recent supersu update caused my phone to get stuck during booting:
The new update came over the playstore, it asked me to update the app. After that it said that the Super User Binary needs to be updated. I chose the option that does the update process in the CWM recovery.
Then this happend:
System shuts down, boots, I see that some kind of black screen gets displayed(softkeys on and the display stays blank), then it reboots and stops the boot on the Galaxy S2 splash screen. Now that I didnt even get to the samsung splash screen I flashed the Apolo Kernel as an tar file through odin
after that I was able to get one step further and was able to get the Samsung splash Screen but the Splash screen keeps on repeating over and over but after that I also had my recovery back.
Now I tried to Install SuperSU 2.16 as zip in the recovery. but the endless samsung screen persited. After that I used the 2.15 Beta file. but this didnt work either.
I also fixed permissions wiped cache & dalvic cache
Why wouldnt my system boot after the first initial update and how can I finally fix the boot "loop"?
Thank you very much guys!
Click to expand...
Click to collapse
Try to reinstall your rom without wipe data. Don't update supersu via cwm!
Sent from my GT-I9100 using XDA Free mobile app
chrisXL said:
Try to reinstall your rom without wipe data. Don't update supersu via cwm!
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
I was able to pull a logcat:
Could someone look into it and perhaps tell me how to fix it?
Heraku said:
I was able to pull a logcat:
Could someone look into it and perhaps tell me how to fix it?
Click to expand...
Click to collapse
Sorry to repeat myself, reflash your rom (no wipe). You will not lose anything.
It's the easiest way.
Sent from my GT-I9100 using XDA Free mobile app
after using complete unroot s6 keep in boot loop how to fix it?
If you use TWRP like me and have a recent backup of your system just restore it and it'll fix the boot loop.
chrisXL said:
Sorry to repeat myself, reflash your rom (no wipe). You will not lose anything.
It's the easiest way.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
thank u very much, this saved me from freaking out. it absolutely worked.
supersu binary reboot problem
first of all, get into recovery mode and copy the rom and gapps files to your internal storage through pc via usb cable.
then wipe the data, and make a clean flash of rom and gapps and reboot system.
I know this method will surely lose our data. but I have not found a solution at that particular instant other than this.
It happened to me.
Hope someone will surely solve this problem.
Thank you chrisXL, came across this thread from a Google search regarding my OnePlus2 using LinageOS after the SuperSU binary update. I simply went to INSTALL in TWRP and didn't use any wipe options. Phone booted right up after that! Thanks!!
Hi Guys, please help me. I flashed my moto g peregrine with the latest lineage os version. After that, i enable the the root option via TWRP with the addonsu.
After that, i downloaded via google store the SuperSU app i it asks to update the binary. I choosed the option via "TWRP" since the other option didn't work. After that, my phone is on bootloop (the symbol of lineage os is moving) and i can't acess to recovery mode.
What i can do?
j_moreno91 said:
Hi Guys, please help me. I flashed my moto g peregrine with the latest lineage os version. After that, i enable the the root option via TWRP with the addonsu.
After that, i downloaded via google store the SuperSU app i it asks to update the binary. I choosed the option via "TWRP" since the other option didn't work. After that, my phone is on bootloop (the symbol of lineage os is moving) and i can't acess to recovery mode.
What i can do?
Click to expand...
Click to collapse
Same problem here I had my mokke Rom pre rooted but titanium used to ask for SuperSU so installed the app from Google play and tried to install it via cwm/twrp and now it's stuck on the mokkee boot logo and can't even access my recovery what did you do solve the problem?