Hi Guys, my phone do not show download progress bar in download mode
1. Flashed XXKH3 2.3.4, CSC_TGY_I9100OZSKG2
2. i want to flash Litening Rom
3. i flashing by Odin3 but unfortune i forget to turn off Kies and it's tray
4. Odin hold on <ID:0/009> factoryfs.img for an hour
5. no download progress bar shown
6. i turn off my phone and try flash stock kernel
7. Odin hold on <ID:0/009> zImage and no progress bar shown
8. i press Vol up + home + power and go into recovery mode (3e)
9. i choose wipe data/factory reset
10. flash by Odin3 again, and step4 happen again!
note:
1. i flashed and rooted before
2. my phone is still now normal to use but cannot flash anything only
3. i do not have a Jig
4. Battery is full power
any ideas ? am i need take my phone back to Samsung?
thanks for any help
wkcflc said:
Hi Guys, my phone do not show download progress bar in download mode
1. Flashed XXKH3 2.3.4, CSC_TGY_I9100OZSKG2
2. i want to flash Litening Rom
3. i flashing by Odin3 but unfortune i forget to turn off Kies and it's tray
4. Odin hold on factoryfs.img for an hour
5. no download progress bar shown
6. i turn off my phone and try flash stock kernel
7. Odin hold on zImage and no progress bar shown
8. i press Vol up + home + power and go into recovery mode (3e)
9. i choose wipe data/factory reset
10. flash by Odin3 again, and step4 happen again!
note:
1. i flashed and rooted before
2. my phone is still now normal to use but cannot flash anything only
3. i do not have a Jig
4. Battery is full power
any ideas ? am i need take my phone back to Samsung?
thanks for any help
Click to expand...
Click to collapse
Stop the kies software. Odin and kies don't play nice together.
Sent from my GT-P1000 using xda premium
yes i stopped after Step 3
i know i should stop it but i forgot this time
You can try a stock rom before litening. Reboot pc and kill all kies tasks.
Ffbf said:
You can try a stock rom before litening. Reboot pc and kill all kies tasks.
Click to expand...
Click to collapse
Also plug into a different usb socker. Usually the ones at the rear of the case work best.
thanks for help
i try reboot and uninstalled kies and use another usb port
and try to flash stock rom KG2
but it still hold on this screen (attachment) and do not show download bar in download mode
That picture shows you trying to flash a wrong file .
You want what ???? stock KG2 ???
In which case download a stock KG2 file and flash it .
jje
I am download the XXKG2 kernel here, is this stock kernel?
http://forum.xda-developers.com/showthread.php?t=1075278
XXKG2
Firmware info
PDA:XXKG2
PHONE: XXKG2
Date: 12/07/2011
OXA Poland:http://www.multiupload.com/9SY9CKXAWB
XXKG2 Stock Kernel: http://www.multiupload.com/0OOHFI08Y5
Password: [email protected]
finally i think i found a stock KG2 kernel
and Odin hold this screen (attachment)
ANY IDEA?
i have never tried, but did you try restoring your firmware using KIES emergency firmware?
Related
hello,
my phone is acting wierd
it boots till that yellow caution incon then again restarts
i was on rootbox and installed cm7 and not booting to recovary but can boot into download mode
after rebooting this happed
some one please help me
thank you
Are you still on CM7?
Does it still go into recovery? Have you tried clearing data/cache?
How much battery was it on when this happened? If low leave it charging for a bit and then try it on whilst charging.
Try a stock samsung firmware if anything else fails to let it boot.
Hi
what i did is
used rom cleaning script and installed CM7 and gave reboot
phone turns on till that yellow triangle (main screen where samsung S2 comes) and restarts
cant go to recovary mode
from where can i download odin flashables?
should i try flashing with odin is it safe?
please im not in position to buy a phone
Have you tried to go to the stock rom first?
1. Download the stock rom of your phone. 4.0.3
2. Download Odin
3. press the sleep buttom, home buttom and the volume up.
4. wipe the cache and do a factory reset after that turn off your phone. (alternative)
5. Press sleep buttom, home buttom and volume down then you'll get to download mode.
6. put in the usb cabel on your phone and the pc.
7. Then it will connect to the pc and odin.
8. extract the stock rom and have it on your desktop.
9. now on odin press on PDA and select the file.
10.now press start.
Everything should go smooth so after that you can install cf root and if you did a backup you can restore it, unless you had it on the internal storage.
(dont forget to do a nandroid or cwm backup before installing rom into your external storage!
i dont know from where i can get odin flashables
i called my phone and got build info
Android 4.0.3
IML7K.XWLP7
DDLPA
My phone : I9100
Country : India
Thank you
If you skip the recovery part you should be able to restore internal backup
Did you wipe data when you flashed cm7?
Its necessary.
Sent from my GT-I9100 using Tapatalk 2
Somebody help this guy quick! He's in the wrong section!
You can download odin flashable's here: http://forum.xda-developers.com/showthread.php?t=1544487 and here: http://www.samfirmware.com/ and also here: http://forum.xda-developers.com/showthread.php?t=1075278
Try to flash an ROM from India, or if you flash a ROM from a different country or region and you have problems with your network you can try and flash a modem which works specific in India
if you want the stock rom just go to samfirmware.com and download there unfortunately i cant send the link because i need to post 10 posts
Dont forget you need to sign up an account on samfirmware to download firmware
Think u need this one
http://www.sammobile.com/firmware/?page=8&view=4552
Sent from my GT-I9100 using xda premium
downloading firmware .. still 1 hour to go
fingers crossed and tensed hope ill get my phone back
Good luck and please hit the thanks buttom on my instruction:laugh:
I thought CM7 is for Gingerbread? And you have ICS rom? It won't work!
all you need to know and download is on this site
Thank you guys
Phone is working again
Sent from my GT-I9100 using Tapatalk 2
How can I fix a soft brick, if flashing a regular stock rom fails? what should I do?
it it fails flash stock in odin
eventually I did recover my phone. thx anyway.
raied115 said:
eventually I did recover my phone. thx anyway.
Click to expand...
Click to collapse
For future referance, if it's stock through Kies, use recovery mode in Kies, or you press Vol- Home and power to switch it on, and it should take you to download (Odin) mode, then just flash the rom through the Odin software.
Download the file via Checkfus downloader.
Extract the .zip once (If you download a .tar or .tar.md5 file this step is not required)
Boot into Download mode.
End any Kies process via task manager.
Open Odin.
Connect your phone via USB.
Click the PDA button and add the .tar file.
Make sure re-partition is NOT!!!! clicked.
click start and sit back for a few minutes.
I thought he said "how to soft brick"
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working. I tried to flash a stock rom and I got a successful flash, but a bootloop at restart.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
I can flash using odin using a usb jig to put it in download mode
So... What do you propose to do?
Thanks in advance!
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Flash DorimanX kernel and restore home button in STweaks.
GamingDj said:
Flash DorimanX kernel and restore home button in STweaks.
Click to expand...
Click to collapse
Uhm I think this is not the only viable solution.
Investigations and trials
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Hello,
I have the same issue, I was in CM 10.1.1 stable and home button not working.
Then, I tried to flash a stock ROM via Odin, and now my phone is stuck in a bootloop...
I tried to flash different ROMS (always stock from sammobile.com) but every time the result is the same: bootloop.
The problem is that as my home button is not working, I cannot go into recovery mode to do a factory reset or flash a custom ROM, neither in download mode (I use a home made JIG for this).
I have also tried to flash the correct OMAP pit file, hoping for it to do a full wipe, but did not work either, my phone is still in a boot loop.
My last hope would be to do a OMAP flash as described here: link
But I am not sure it will fix the problem and this solution is quite risky...
Does anyone have another idea / suggestion ?
Also, I am not confident in changing my home button as it is necessary to remove the LCD first...
@GamingDj: I did not found any i9100g compatible DorimanX kernel, only i9100...
Many thanks in advance for your help.
Cheers
Help
Any help on this issue please ?
My phone is still dead
Fixed it !
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Can u use adb?
then, you can enter the recovery mode by using adb reboot recovery
Sent from my Nexus 4 using Tapatalk 4
abuisset said:
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Click to expand...
Click to collapse
can you point out what cwm kernel you put on?
RadarZgin said:
can you point out what cwm kernel you put on?
Click to expand...
Click to collapse
Hello,
Here is what I used:
Stock Firmware 4.0.3 I9100GXXLPN from sammobile.com
CWM 6.0.1.2
Odin3 v1.85
Cheers,
Anthony
hi all, ive downloaded this custom rom (xaiomi rom for samsung galaxy s4 gt-i9505) and ive followed the step by step to install this new rom (yep, im still a noob to this) and now my phone seems to be stuck on the start up. im not sure what i did wrong because i made sure the rom was for my device. i used CWM to install it via ROM manager and now its stuck, i done what it told me to do like do a factory reset (i done that with cwm) and backed up all my data with TIBU but its just stuck, any ideas on what i should do? ive tried the battery pull and tried to boot into cwm recovery but it says in little blue writing *booting* or something like that but then it just returns to start up and freezes :/ thanks in advance
Please help asap!!!
please help me because i dont have a computer and im at my friends house leaving soon and i want to fix this before i go!!!!!
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
SeraphSephiroth said:
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
Click to expand...
Click to collapse
does it matter what odin i use?!?!?!
phattpro1 said:
does it matter what odin i use?!?!?!
Click to expand...
Click to collapse
Nope
Guys, i tried to used TWRP but unable to find the right way to root it. So i decided to bring it back to stock recovery.
But after flashing when i checked the status of my software, it states "Custom", how can i bring it back to "Official" status??
Im now using stock recovery, SM-G610Y - J7 Prime
Please advise how.
atocruz said:
Guys, i tried to used TWRP but unable to find the right way to root it. So i decided to bring it back to stock recovery.
But after flashing when i checked the status of my software, it states "Custom", how can i bring it back to "Official" status??
Im now using stock recovery, SM-G610Y - J7 Prime
Please advise how.
Click to expand...
Click to collapse
You have to flash stock firmware.So there are steps to flash stock firmware.
1.first download odin & stock firmware.( Stock firmware link - https://trueandroid.com/en/samsung-galaxy-j7-prime-sm-g610y-latest-stock-firmware-download-guide/ ))
2.then Go to download mode by pressing VOLUME DOWN + HOME + POWER BUTTON same time untill you see android logo after that press VOLUME UP button then your phone is in download mode .
3.Now run Odin & connect your ohone with pc .On odin it is showing that it is connected then dont touch anything in select PDA file when it select then choose the firmware file downloaded from link .But before selecting extract the file after extraction the file format will will be. tar.
4.Now click on start.
5.You have succesfully flash stock firmware.
raosahab said:
You have to flash stock firmware.So there are steps to flash stock firmware.
Click to expand...
Click to collapse
sir i am on may 1 android security patch level and i want to play pokemon go with joystick which is only possible on before march 1 android security patch level, is there any method for downgrading (with/without root)?
raosahab said:
You have to flash stock firmware.So there are steps to flash stock firmware.
1.first download odin & stock firmware.( Stock firmware link - https://trueandroid.com/en/samsung-galaxy-j7-prime-sm-g610y-latest-stock-firmware-download-guide/ ))
2.then Go to download mode by pressing VOLUME DOWN + HOME + POWER BUTTON same time untill you see android logo after that press VOLUME UP button then your phone is in download mode .
3.Now run Odin & connect your ohone with pc .On odin it is showing that it is connected then dont touch anything in select PDA file when it select then choose the firmware file downloaded from link .But before selecting extract the file after extraction the file format will will be. tar.
4.Now click on start.
5.You have succesfully flash stock firmware.
Click to expand...
Click to collapse
Will it reset my knox?