Related
hi guys
im from malaysia. my phone comes with stock S5830DXKPD. i have flash cm7 and now trying to go back to stock rom. i also tried to restore the backup i made from cwm before. however, it stuck with 'galaxy ace' logo. one of my friend suggest me to flash the stock rom which i can get from sammobile.
so my question is, can i flash the firmware using cwm??? or is it can be flash using odin only???.
for your information, my phone cant be detected by the pc after i flash cm7. so cant use odin or if you guys have any idea for me to use odin.
really need help. thanks
clear data and cache in cwm. thn flash a stock rom using odin from samfirmware.
but then, i cant connect my phone to kies as well as odin. had try reinstall kies but same problem occur. sd can be detect and be access through my computer.
everytime i run odin, it said "please connect phone!!" what should i do so that odin can detect my phone.
p/s: my phone driver work correctly. so i dont know why kies and odin cant detect my phone
Reinstall drivers. It should work.
Did you go into download mode for flashing via Odin?
Sent from cyanogenmod7 Galaxy Ace...
Don't just say 'thanks',press the thanks button,if I helped you..
tak_dokname said:
but then, i cant connect my phone to kies as well as odin. had try reinstall kies but same problem occur. sd can be detect and be access through my computer.
everytime i run odin, it said "please connect phone!!" what should i do so that odin can detect my phone.
p/s: my phone driver work correctly. so i dont know why kies and odin cant detect my phone
Click to expand...
Click to collapse
kies is only meant for stock rom, not custom rom.
Prawesome said:
Did you go into download mode for flashing via Odin?
Sent from cyanogenmod7 Galaxy Ace...
Don't just say 'thanks',press the thanks button,if I helped you..
Click to expand...
Click to collapse
i was thinking the same thing. u cant flash to stock using kies on a custom rom, but u can flash back to stock via odin.
for odin to recognize your phone, please get your phone into download mode where by your screen will only show the word "downloading" in yellow...
Go to download mode (hold down Vol down+power+home) then connect to pc. If that won't work, put off your sim, sd, battery. Connect to pc. Now hold down vol down + power + home for a while. Now put in your battery and again hold down vol down + power + home. That worked for me when i broke my rom It don't have to work for you. You can try this only at your own risk.
Wojtys said:
Go to download mode (hold down Vol down+power+home) then connect to pc. If that won't work, put off your sim, sd, battery. Connect to pc. Now hold down vol down + power + home for a while. Now put in your battery and again hold down vol down + power + home. That worked for me when i broke my rom It don't have to work for you. You can try this only at your own risk.
Click to expand...
Click to collapse
it works. odin detect my phone. thanks guys. but then, after i do some reading, it said that i need multi file to be used in the odin but i didnt find what file should i download.
when i go to samfirmware, there are only one package file. so what should i do. should i proceed with one package file????
tak_dokname said:
hi guys
im from malaysia. my phone comes with stock S5830DXKPD. i have flash cm7 and now trying to go back to stock rom. i also tried to restore the backup i made from cwm before. however, it stuck with 'galaxy ace' logo. one of my friend suggest me to flash the stock rom which i can get from sammobile.
so my question is, can i flash the firmware using cwm??? or is it can be flash using odin only???.
for your information, my phone cant be detected by the pc after i flash cm7. so cant use odin or if you guys have any idea for me to use odin.
really need help. thanks
Click to expand...
Click to collapse
if you has RESTORE the Backup in CWM, before reboot, perform full wipe/data. if still bootloop, Shutdown and perform full wipe/data again. I had experience too. Sorry for my English.
If your device not detect on your PC, reinstall SAMSUNG DRIVER and REBOOT.
tak_dokname said:
it works. odin detect my phone. thanks guys. but then, after i do some reading, it said that i need multi file to be used in the odin but i didnt find what file should i download.
when i go to samfirmware, there are only one package file. so what should i do. should i proceed with one package file????
Click to expand...
Click to collapse
Here's the full package of XXKPH. Cooper and ODIN is also included on the zip file. Just extract it. you can use this if you want. happy flashing
http://hotfile.com/dl/134788696/23d0...XXKPH.rar.html
thanks all. everything had just go very well.
Nice to know
Same problem for me too. I reflashed with single tar package .. GOt boot loop .. Simply cleared cache and rstored and works perfectly.
Sent from my GT-S5830 using xda premium
hello,
my phone is acting wierd
it boots till that yellow caution incon then again restarts
i was on rootbox and installed cm7 and not booting to recovary but can boot into download mode
after rebooting this happed
some one please help me
thank you
Are you still on CM7?
Does it still go into recovery? Have you tried clearing data/cache?
How much battery was it on when this happened? If low leave it charging for a bit and then try it on whilst charging.
Try a stock samsung firmware if anything else fails to let it boot.
Hi
what i did is
used rom cleaning script and installed CM7 and gave reboot
phone turns on till that yellow triangle (main screen where samsung S2 comes) and restarts
cant go to recovary mode
from where can i download odin flashables?
should i try flashing with odin is it safe?
please im not in position to buy a phone
Have you tried to go to the stock rom first?
1. Download the stock rom of your phone. 4.0.3
2. Download Odin
3. press the sleep buttom, home buttom and the volume up.
4. wipe the cache and do a factory reset after that turn off your phone. (alternative)
5. Press sleep buttom, home buttom and volume down then you'll get to download mode.
6. put in the usb cabel on your phone and the pc.
7. Then it will connect to the pc and odin.
8. extract the stock rom and have it on your desktop.
9. now on odin press on PDA and select the file.
10.now press start.
Everything should go smooth so after that you can install cf root and if you did a backup you can restore it, unless you had it on the internal storage.
(dont forget to do a nandroid or cwm backup before installing rom into your external storage!
i dont know from where i can get odin flashables
i called my phone and got build info
Android 4.0.3
IML7K.XWLP7
DDLPA
My phone : I9100
Country : India
Thank you
If you skip the recovery part you should be able to restore internal backup
Did you wipe data when you flashed cm7?
Its necessary.
Sent from my GT-I9100 using Tapatalk 2
Somebody help this guy quick! He's in the wrong section!
You can download odin flashable's here: http://forum.xda-developers.com/showthread.php?t=1544487 and here: http://www.samfirmware.com/ and also here: http://forum.xda-developers.com/showthread.php?t=1075278
Try to flash an ROM from India, or if you flash a ROM from a different country or region and you have problems with your network you can try and flash a modem which works specific in India
if you want the stock rom just go to samfirmware.com and download there unfortunately i cant send the link because i need to post 10 posts
Dont forget you need to sign up an account on samfirmware to download firmware
Think u need this one
http://www.sammobile.com/firmware/?page=8&view=4552
Sent from my GT-I9100 using xda premium
downloading firmware .. still 1 hour to go
fingers crossed and tensed hope ill get my phone back
Good luck and please hit the thanks buttom on my instruction:laugh:
I thought CM7 is for Gingerbread? And you have ICS rom? It won't work!
all you need to know and download is on this site
Thank you guys
Phone is working again
Sent from my GT-I9100 using Tapatalk 2
Hi guys
I have just flashed Omega v8.1 to my phone and reflashed CWM touch, rebooted into recovery and now my phone won't boot. It turns on and just displays the "Samsung Galaxy S3" screen. I have tried flashing via the Galaxy s 3 toolkit but this requires USB debugging to be enabled. It looks as though it is not enabled as the toolkit does not recognise my phone.. The only thing I can do is boot it into download mode.
Any clues??
Thanks
If you can go on download mode, then flash stock firmware via odin.
Sent from my GT-I9300 using xda premium
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Also, you posted this in the wrong section
Just flash the stock rom?
Yep bricked phone isn't really a problem, unless it's hardware related.
Sent from my GT-I9300 using xda premium
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
Also, you posted this in the wrong section
Click to expand...
Click to collapse
This right method, some times data ****ed up, so must wipe cache
Sent from my GT-I9300 using Tapatalk 2
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
reflash cwm and see
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
I d say, simply get odin separately, then re-create the same settings as when the toolkit does it.
It really is very simple once you ve done it once or twice Don t panic and take the time to make sure the right boxes are checked and double-triple check then reboot in Download mode, plug it in then gogo !
Tectas said:
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
You can use odin without the toolkit for the meantime, just run it and put your phone on downlod mode
Sent from my GT-I9300 using xda premium
hisee said:
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's always disabled after ROM flash and I keep forgetting to re enable it..
brianwilkie76 said:
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
Click to expand...
Click to collapse
Ok, sry, then the toolkit reboots your device first to download mode via adb, take the already given advice to use Odin itself, just download it put the Rom tar (or tar.md5) into pda, make sure that only auto reboot and reset time is checked, reboot to download mode continue by pressing up, plugin the cable and press the start button at Odin.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Forget running the toolkit, forget USB debugging mode. You do not need it for now.
And there is no need to download or setup ODIN or anything like that.
Just go to folder/directory where you installed the toolkit (usually C:\Samsung Galaxy S3 ToolKit) and look for the file called 'Odin3_v3.07' or 'Odin3_v3.04' or whatever version you find. Then run it; tada, ODIN is running now!
Now, put your phone in download mode. To do this, hold VOL DOWN and HOME and POWER buttons together and let go when you see the 'Samsung Galaxy S III' logo come up.
Then it will load up a screen that says press VOL UP to continue (and enter download mode). Press it.
Now it should say 'Downloading do not turn off target!'
Connect your USB Cable and proceed to flash a new CWM recovery using ODIN
Then once you have flashed a new recovery, boot into it (VOL UP & HOME & POWER buttons together).
Then follow my instructions from my previous post.
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Click to expand...
Click to collapse
If you want to flash a stock ROM instead of CWM + Custom ROM then you can do that via ODIN as well.
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
themude said:
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
Click to expand...
Click to collapse
Boot into custom recovery (VOL UP & HOME & POWER buttons together)
Then:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Reboot into Android and see if that has fixed it; if not, then go back to CWM recovery and do the following:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Format /system (probably not required but just in case)
And then flash Omega ROM again
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
themude said:
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=UxaVXJJdhhk
How to enter RECOVERY mode on the Samsung Galaxy S3
1) Make sure the phone is turned OFF (take out battery, wait 10 seconds, replace battery, make sure nothing appears on screen)
2) Press+Hold the VOL UP and HOME buttons, together
3) Now, whilst holding these two buttons together, press+hold the POWER button
4) Keep all of these buttons held down, don't let go even if you see the 'Samsung Galaxy S III' logo screen, ignore it and keep holding those three buttons down
5) Once you see the recovery screen, you can let go of the buttons and start using the recovery as you wish
How to enter DOWNLOAD mode on the Samsung Galaxy S3
Follow all the steps as above, except at step 2) press+hold VOL DOWN and HOME buttons together
Hi All
First of I would like to thank you all for having me on your forum.
Second, I live in South Africa, I have a Samsung Galaxy S3 and my service provider is Vodacom.
I am trying to root my device.
I did manage to get into the "Downloading" Mode and using Odin I managed to install the "clockworkmod"
The next step is to boot into recovery mode (Press and hold Volume Up, Home Button & Power Button) but my S3 does not want to go into recovery mode. When I follow the steps it freezes on The Galaxy Logo.
I really want to root my device to use ALL of the awesome stuff you guys develop.
Thank You in advance.
Only hold vol up + home + power until you see the white galaxy s3 writing then release
Sent from my GT-I9300 using xda premium
Hi
Thank You for the Reply.
I did only hold it down until the logo pops up and then I released.
It still freezes. I have tried holding it in for longer.
I have checked the net and came across different methods and that did not work.
Could it be that Vodacom changed how it goes into recovery mode?
I would say flash an open fw through Odin. *2767*3855# to clean phone from obsolete data. Make sure to backup what you need. Flash CF through Odin.
Boot to recovery through cwm app.
Sent from my GT-I9300 using xda premium
Hi
Thank You for the reply.
I am very sorry if I appear stupid, but is there somewhere where I can get Step by Step instructions?
Thank You
go here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
given that you have international i9300 downlolad on from the link above. extract it and it will be in tar or tar.md5 extension.
go here http://forum.xda-developers.com/showthread.php?t=1695238 and download ODIN, put extracted tar that you downloaded from sammobile at PDA section of Odin do not check anything else in Odin.
put device in download mode by pressing vol down+home+ power on, press vol up to acknowlede the warning.
connect device. before pressing Start make sure nothing from Kies program is running.
press start.
wait till it is over and phone reboots.
then *2767*3855#
wait till reboot.
go again at the second link i gave you and download latest CF root.
put it in Odin again at PDA section. put device in download mode connect. press start. wait till reboot. you are rooted. to boot in recovery select cwm app that is in appdrawer and select to boot in cwm.
flash yhe roms that you want.
Try "tool kit" from mskip. Step by step guide.very easy.
u just Dl. From links above and use tool kit to backup and flash.
all root and recovery tools are included.only full firmware is not included
SupTech86 said:
Hi
Thank You for the reply.
I am very sorry if I appear stupid, but is there somewhere where I can get Step by Step instructions?
Thank You
Click to expand...
Click to collapse
Another way is to download Rom toolbox from market. Once installed go to manage roms and click on reboot recovery.
elevation_2 said:
Another way is to download Rom toolbox from market. Once installed go to manage roms and click on reboot recovery.
Click to expand...
Click to collapse
Rom toolbox requires root. He is not rooted yet.
Sent from my GT-I9300 using xda premium
Just got mine from Vodacom and it happily goes into recovery mode with vol + home + power combo, sure this doesnt help you but there you go
mariosraptor said:
go here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
given that you have international i9300 downlolad on from the link above. extract it and it will be in tar or tar.md5 extension.
go here http://forum.xda-developers.com/showthread.php?t=1695238 and download ODIN, put extracted tar that you downloaded from sammobile at PDA section of Odin do not check anything else in Odin.
put device in download mode by pressing vol down+home+ power on, press vol up to acknowlede the warning.
connect device. before pressing Start make sure nothing from Kies program is running.
press start.
wait till it is over and phone reboots.
then *2767*3855#
wait till reboot.
go again at the second link i gave you and download latest CF root.
put it in Odin again at PDA section. put device in download mode connect. press start. wait till reboot. you are rooted. to boot in recovery select cwm app that is in appdrawer and select to boot in cwm.
flash yhe roms that you want.
Click to expand...
Click to collapse
Thank You Very Much
It worked! Now I am rooted thanks to You.
Really Thank You
Thank You all Very Much for the help and input.:good:
Just a question: What would you say is the best performance, Stable ROM out there?
Thank You
You are welcome. I am on wanamlite 1.5 and ninphetamine 1.2.0 kernel. Very good battery and as always wanam makes very stable and bug free roms.
Sent from my GT-I9300 using xda premium
Thank You
Where can I download it from.
The "Rom Manager" in playstore, Can this also install the wanamlite 1.5?
Thank You
http://forum.xda-developers.com/showthread.php?t=17058664
just try and read some before flashing. and Always search the XDA forum for what you want. do not expect everything always from someone.
remember to read everything before trying to flash and always backup backup backup.
i do not use rom manager for flashing and backup. in Clockworkmod I Trust!!! lol
A little late..
It's too late now but you could have just opened up terminal emulator and typed
su
reboot recovery
I downloaded the sgs international toolkit 6.0.0 and on step 9 my phone was suppose to reboot, and it turned off but i can't get to reboot no more. Is there anyway i can recover it?
STORMER3000 said:
I downloaded the sgs international toolkit 6.0.0 and on step 9 my phone was suppose to reboot, and it turned off but i can't get to reboot no more. Is there anyway i can recover it?
Click to expand...
Click to collapse
I can go into recovery mode, when I click on reboot system now, its not powering on??
Hello everyone,
I am a complete and utter idiot, and accidentally installed cyanogenmod 10.1 over a fresh install of 10.2 without gapps on my verizon sgs 3. Now my phone is stuck in bootloop and when I try to enter recovery mode the original samsung logo flashes and then nothing. I am at a complete loss for how i can go about trying to salvage this hardware; I can't get it to talk to my pc using adb either. Any help on initial steps would be very very greatly appreciated.
flashing stock rom with odin via download mode should do the trick.
When I enter into ODIN download mode (by pressing down vol + home + power) its gives me a message saying downloading, please do not turn off target. Do I just need to leave it in this mode and let it do it's thing? It seems dubious that ODIN could download something without fully booting the phone. Am I going to need to download an image of the stock rom to flash? Thanks so much for your reply!!
No you need to download the stock rom to your pc and use the odin pc app to flash it. At this point you can turn off your phone.
Sent from my GT-I9505 using Tapatalk now Free
1. You can either boot into recovery, flash CM 10.2 and gapps again, and wipe everything when you're done, or...
2. Fire up Odin (PC) and flash the stock ROM and start from scratch.
LordManhattan said:
1. You can either boot into recovery, flash CM 10.2 and gapps again, and wipe everything when you're done, or...
2. Fire up Odin (PC) and flash the stock ROM and start from scratch.
Click to expand...
Click to collapse
See that's just it; I can no longer boot into anything but download mode. I'm currently downloading the default kernel, OS image and the ODIN desktop application. I'm not sure I'll be able to get it to flash; we will see
Add it as PDA, not phone. Also make sure repartition is NOT checked.
Sent from my GT-I9505 using Tapatalk now Free