Hello everyone,
I am a complete and utter idiot, and accidentally installed cyanogenmod 10.1 over a fresh install of 10.2 without gapps on my verizon sgs 3. Now my phone is stuck in bootloop and when I try to enter recovery mode the original samsung logo flashes and then nothing. I am at a complete loss for how i can go about trying to salvage this hardware; I can't get it to talk to my pc using adb either. Any help on initial steps would be very very greatly appreciated.
flashing stock rom with odin via download mode should do the trick.
When I enter into ODIN download mode (by pressing down vol + home + power) its gives me a message saying downloading, please do not turn off target. Do I just need to leave it in this mode and let it do it's thing? It seems dubious that ODIN could download something without fully booting the phone. Am I going to need to download an image of the stock rom to flash? Thanks so much for your reply!!
No you need to download the stock rom to your pc and use the odin pc app to flash it. At this point you can turn off your phone.
Sent from my GT-I9505 using Tapatalk now Free
1. You can either boot into recovery, flash CM 10.2 and gapps again, and wipe everything when you're done, or...
2. Fire up Odin (PC) and flash the stock ROM and start from scratch.
LordManhattan said:
1. You can either boot into recovery, flash CM 10.2 and gapps again, and wipe everything when you're done, or...
2. Fire up Odin (PC) and flash the stock ROM and start from scratch.
Click to expand...
Click to collapse
See that's just it; I can no longer boot into anything but download mode. I'm currently downloading the default kernel, OS image and the ODIN desktop application. I'm not sure I'll be able to get it to flash; we will see
Add it as PDA, not phone. Also make sure repartition is NOT checked.
Sent from my GT-I9505 using Tapatalk now Free
Related
Hi guys
I have just flashed Omega v8.1 to my phone and reflashed CWM touch, rebooted into recovery and now my phone won't boot. It turns on and just displays the "Samsung Galaxy S3" screen. I have tried flashing via the Galaxy s 3 toolkit but this requires USB debugging to be enabled. It looks as though it is not enabled as the toolkit does not recognise my phone.. The only thing I can do is boot it into download mode.
Any clues??
Thanks
If you can go on download mode, then flash stock firmware via odin.
Sent from my GT-I9300 using xda premium
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Also, you posted this in the wrong section
Just flash the stock rom?
Yep bricked phone isn't really a problem, unless it's hardware related.
Sent from my GT-I9300 using xda premium
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
Also, you posted this in the wrong section
Click to expand...
Click to collapse
This right method, some times data ****ed up, so must wipe cache
Sent from my GT-I9300 using Tapatalk 2
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
reflash cwm and see
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
I d say, simply get odin separately, then re-create the same settings as when the toolkit does it.
It really is very simple once you ve done it once or twice Don t panic and take the time to make sure the right boxes are checked and double-triple check then reboot in Download mode, plug it in then gogo !
Tectas said:
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
You can use odin without the toolkit for the meantime, just run it and put your phone on downlod mode
Sent from my GT-I9300 using xda premium
hisee said:
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's always disabled after ROM flash and I keep forgetting to re enable it..
brianwilkie76 said:
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
Click to expand...
Click to collapse
Ok, sry, then the toolkit reboots your device first to download mode via adb, take the already given advice to use Odin itself, just download it put the Rom tar (or tar.md5) into pda, make sure that only auto reboot and reset time is checked, reboot to download mode continue by pressing up, plugin the cable and press the start button at Odin.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Forget running the toolkit, forget USB debugging mode. You do not need it for now.
And there is no need to download or setup ODIN or anything like that.
Just go to folder/directory where you installed the toolkit (usually C:\Samsung Galaxy S3 ToolKit) and look for the file called 'Odin3_v3.07' or 'Odin3_v3.04' or whatever version you find. Then run it; tada, ODIN is running now!
Now, put your phone in download mode. To do this, hold VOL DOWN and HOME and POWER buttons together and let go when you see the 'Samsung Galaxy S III' logo come up.
Then it will load up a screen that says press VOL UP to continue (and enter download mode). Press it.
Now it should say 'Downloading do not turn off target!'
Connect your USB Cable and proceed to flash a new CWM recovery using ODIN
Then once you have flashed a new recovery, boot into it (VOL UP & HOME & POWER buttons together).
Then follow my instructions from my previous post.
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Click to expand...
Click to collapse
If you want to flash a stock ROM instead of CWM + Custom ROM then you can do that via ODIN as well.
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
themude said:
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
Click to expand...
Click to collapse
Boot into custom recovery (VOL UP & HOME & POWER buttons together)
Then:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Reboot into Android and see if that has fixed it; if not, then go back to CWM recovery and do the following:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Format /system (probably not required but just in case)
And then flash Omega ROM again
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
themude said:
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=UxaVXJJdhhk
How to enter RECOVERY mode on the Samsung Galaxy S3
1) Make sure the phone is turned OFF (take out battery, wait 10 seconds, replace battery, make sure nothing appears on screen)
2) Press+Hold the VOL UP and HOME buttons, together
3) Now, whilst holding these two buttons together, press+hold the POWER button
4) Keep all of these buttons held down, don't let go even if you see the 'Samsung Galaxy S III' logo screen, ignore it and keep holding those three buttons down
5) Once you see the recovery screen, you can let go of the buttons and start using the recovery as you wish
How to enter DOWNLOAD mode on the Samsung Galaxy S3
Follow all the steps as above, except at step 2) press+hold VOL DOWN and HOME buttons together
I am trying to install a stock or custom recovery mode for the time being. I have lost the recovery mode trying to install a custom ROM. Now no matter what I do, I just can't install a recovery mode.
CWM - odin's progress bar is stuck on 0%
TWRP - odin crashes after you click start on the program
Installing from SD Card - soft bricks the phone since it will force into recovery mode.
I truly need a lot of help and would appreciate any assistance or someone to message to guide me step by step. Thanks.
birkinx said:
I am trying to install a stock or custom recovery mode for the time being. I have lost the recovery mode trying to install a custom ROM. Now no matter what I do, I just can't install a recovery mode.
CWM - odin's progress bar is stuck on 0%
TWRP - odin crashes after you click start on the program
Installing from SD Card - soft bricks the phone since it will force into recovery mode.
I truly need a lot of help and would appreciate any assistance or someone to message to guide me step by step. Thanks.
Click to expand...
Click to collapse
Have you tried starting over from scratch? In other words reinstall factory software, root, etc.......
birkinx said:
I am trying to install a stock or custom recovery mode for the time being. I have lost the recovery mode trying to install a custom ROM. Now no matter what I do, I just can't install a recovery mode.
CWM - odin's progress bar is stuck on 0%
TWRP - odin crashes after you click start on the program
Installing from SD Card - soft bricks the phone since it will force into recovery mode.
I truly need a lot of help and would appreciate any assistance or someone to message to guide me step by step. Thanks.
Click to expand...
Click to collapse
Just in case -- flashing with Odin may require that you are using the stock Samsung USB cable. Are you?
Everything on it is still factory stock, except it is rooted which has been working properly for some time. Worst case scenario I might have to redo this. This is my first custom rom installation basically.
It's the stock USB cable that came with the Note. And I also tried different USB ports.
birkinx said:
Everything on it is still factory stock, except it is rooted which has been working properly for some time. Worst case scenario I might have to redo this. This is my first custom rom installation basically.
It's the stock USB cable that came with the Note. And I also tried different USB ports.
Click to expand...
Click to collapse
What's the exact filename you are trying to flash? I remember when flashing recovery to my Note (AT&T-branded Note), I loaded cwm-touch-i717-120414.tar.md5 into the "PDA" field of Odin version 1.85 and left the check-boxes as-is.
Have you used Odin ever before to flash this phone? I'm wondering if the driver has been installed so your PC can recognize the Odin mode that the phone is in. I recall the driver I used was USB_Driver_for_ATT_I717_Galaxy_Note_v1_3_2200_0.exe
LaZiODROID said:
What's the exact filename you are trying to flash? I remember when flashing recovery to my Note (AT&T-branded Note), I loaded cwm-touch-i717-120414.tar.md5 into the "PDA" field of Odin version 1.85 and left the check-boxes as-is.
Have you used Odin ever before to flash this phone? I'm wondering if the driver has been installed so your PC can recognize the Odin mode that the phone is in. I recall the driver I used was USB_Driver_for_ATT_I717_Galaxy_Note_v1_3_2200_0.exe
Click to expand...
Click to collapse
I've used Odin before to root my phone and had no problems with it. The file names are:
openrecovery-twrp-2.3.1.1-sgh-879.img.tar.md5 (Crashed Odin)
clockworkmod_touch_recovery_5.8.4.3_i717.tar (Odin had no progress)
openrecovery-twrp-2.3.1.1-i717.img.tar.md5 (Crashed Odin)
I can't find any of the latest version of CMW or TWRP for a CM10 installation that works.
Someone correct me if I'm wrong but since you're rooted, can't you install goo manager and have it install the recovery?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ye you could install it from there or from ROM manager either way though quick ? Is Ur USB cable a good working one? Have you tried attempting the odinizing through another pc? That's for the fella havn issues.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
additionally have a look at this link:
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
I've used it twice and it's very easy to follow. download the zip they have under "sponsored link" and use the Tar in the zip. Also verify that your phone is being seen by your computer, it should display in your device manager as well as show a COM in odin.
USB is fine, no bends, kinks, or frays. The computer recognizes the cord for charging and accessing the phone and the Yellow or Blue COM shows up properly in Odin. I tried the GooManager to install TWRP and it downloads the recovery, says it is installing it and after about 10 minutes goes back to the home screen. No successful installation notification or anything. ROMmanger just fails for me. It shows my recovery as 5.X.X.X and when trying to flash it just hangs on the Flashing popup forever until the screen turns off or a button is press or the screen is touched.
The phone is rooted fine, I just need to put the samsung recovery, twrp, or cwm on it to update it to the latest version to install CM10. Right now there is no recovery mode, just download mode for Odin.
birkinx said:
USB is fine, no bends, kinks, or frays. The computer recognizes the cord for charging and accessing the phone and the Yellow or Blue COM shows up properly in Odin. I tried the GooManager to install TWRP and it downloads the recovery, says it is installing it and after about 10 minutes goes back to the home screen. No successful installation notification or anything. ROMmanger just fails for me. It shows my recovery as 5.X.X.X and when trying to flash it just hangs on the Flashing popup forever until the screen turns off or a button is press or the screen is touched.
The phone is rooted fine, I just need to put the samsung recovery, twrp, or cwm on it to update it to the latest version to install CM10. Right now there is no recovery mode, just download mode for Odin.
Click to expand...
Click to collapse
If you tried installing all those recoveries in odin and failed, I would try starting over from scratch. When people soft brick their phones they go here and follow instructions. That link has an odin .tar prepared with the stock AT&T Kernel, System, and Recovery. Notice it says RECOVERY! After flashing that in odin you should be able to boot into recovery and take over from there.
Try that and report back!
I have an idea...do away with Odin altogether
but it's advanced and could potentially brick you.
Take a tar with the recovery you wanna use and extract that file. Take recovery.img and put it on your sd-card (put it on the internal and external sd-card just to be sure).then connect to pc.
Now Issue the following adb command. I SUGGEST YOU COPY AND PASTE IT, IF YOU TYPE IT WRONG YOU WILL HARD BRICK YOUR PHONE
adb shell dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
I AM NOT RESPONSIBLE IF YOU BRICK
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working. I tried to flash a stock rom and I got a successful flash, but a bootloop at restart.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
I can flash using odin using a usb jig to put it in download mode
So... What do you propose to do?
Thanks in advance!
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Flash DorimanX kernel and restore home button in STweaks.
GamingDj said:
Flash DorimanX kernel and restore home button in STweaks.
Click to expand...
Click to collapse
Uhm I think this is not the only viable solution.
Investigations and trials
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Hello,
I have the same issue, I was in CM 10.1.1 stable and home button not working.
Then, I tried to flash a stock ROM via Odin, and now my phone is stuck in a bootloop...
I tried to flash different ROMS (always stock from sammobile.com) but every time the result is the same: bootloop.
The problem is that as my home button is not working, I cannot go into recovery mode to do a factory reset or flash a custom ROM, neither in download mode (I use a home made JIG for this).
I have also tried to flash the correct OMAP pit file, hoping for it to do a full wipe, but did not work either, my phone is still in a boot loop.
My last hope would be to do a OMAP flash as described here: link
But I am not sure it will fix the problem and this solution is quite risky...
Does anyone have another idea / suggestion ?
Also, I am not confident in changing my home button as it is necessary to remove the LCD first...
@GamingDj: I did not found any i9100g compatible DorimanX kernel, only i9100...
Many thanks in advance for your help.
Cheers
Help
Any help on this issue please ?
My phone is still dead
Fixed it !
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Can u use adb?
then, you can enter the recovery mode by using adb reboot recovery
Sent from my Nexus 4 using Tapatalk 4
abuisset said:
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Click to expand...
Click to collapse
can you point out what cwm kernel you put on?
RadarZgin said:
can you point out what cwm kernel you put on?
Click to expand...
Click to collapse
Hello,
Here is what I used:
Stock Firmware 4.0.3 I9100GXXLPN from sammobile.com
CWM 6.0.1.2
Odin3 v1.85
Cheers,
Anthony
hi all, ive downloaded this custom rom (xaiomi rom for samsung galaxy s4 gt-i9505) and ive followed the step by step to install this new rom (yep, im still a noob to this) and now my phone seems to be stuck on the start up. im not sure what i did wrong because i made sure the rom was for my device. i used CWM to install it via ROM manager and now its stuck, i done what it told me to do like do a factory reset (i done that with cwm) and backed up all my data with TIBU but its just stuck, any ideas on what i should do? ive tried the battery pull and tried to boot into cwm recovery but it says in little blue writing *booting* or something like that but then it just returns to start up and freezes :/ thanks in advance
Please help asap!!!
please help me because i dont have a computer and im at my friends house leaving soon and i want to fix this before i go!!!!!
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
SeraphSephiroth said:
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
Click to expand...
Click to collapse
does it matter what odin i use?!?!?!
phattpro1 said:
does it matter what odin i use?!?!?!
Click to expand...
Click to collapse
Nope
Had my device on Cyanogenmod and decided to put stock one back on it H3G-I9300XXUGNA5-20140227080141.zip (used in past no problems).
1. Odin 3.09 new stock rom tar file - success
2. It boots fine and gets stuck on samsung logo forever
3. When try to go to recovery it goes to the stock one
4. When I try to install any recovery via Odin it's getting replaced by stock one (download mode) - even it says RESET/SUCCESS in Odin
5. Yes I do install CF Autoroot via Odin before custom recovery - success (then I get red android logo and messages, one of the saying "restoring stock recovery"
6. I do untick autoreboot in Odin when flashing recovery as they say here - nothing changes
What do I do now? I run out of ideas ...
mariohi said:
Had my device on Cyanogenmod and decided to put stock one back on it H3G-I9300XXUGNA5-20140227080141.zip (used in past no problems).
1. Odin 3.09 new stock rom tar file - success
2. It boots fine and gets stuck on samsung logo forever
3. When try to go to recovery it goes to the stock one
4. When I try to install any recovery via Odin it's getting replaced by stock one (download mode) - even it says RESET/SUCCESS in Odin
5. Yes I do install CF Autoroot via Odin before custom recovery - success (then I get red android logo and messages, one of the saying "restoring stock recovery"
6. I do untick autoreboot in Odin when flashing recovery as they say here - nothing changes
What do I do now? I run out of ideas ...
Click to expand...
Click to collapse
Try Flashing the stock rom with odin in download mode,You can find yours here
Just tried rom from link provided and exactly same thing happens: boots fine and then stuck on samsung logo.
How would you exactly do rest of steps after that (autoroot and recovery)? Maybe I'm just missing some small detail or is it something more serious?
mariohi said:
Just tried rom from link provided and exactly same thing happens: boots fine and then stuck on samsung logo.
How would you exactly do rest of steps after that (autoroot and recovery)? Maybe I'm just missing some small detail or is it something more serious?
Click to expand...
Click to collapse
Go into stock recovery,wipe cache or do factory reset and it will boot then.
Sent from my Nexus 4 using XDA Free mobile app