Hello. I'm just tried flashing my phone to KPH, but on Odin its stock on "<1> setup connection.." its already took 10min but still nothing happens. what could be wrong?
I already wipe data and cache. and my phone is detected by Odin.
Need your help. Thanks!
Double check if you've done it right:
http://forum.xda-developers.com/showthread.php?t=1034145
QNBT said:
Double check if you've done it right:
http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
i done it right, i already tried it many times..but same error occured.
Disconect phone from computer pul battery out and put it again and start in downloading mode and try again
droidtwoseven said:
Hello. I'm just tried flashing my phone to KPH, but on Odin its stock on "<1> setup connection.." its already took 10min but still nothing happens. what could be wrong?
I already wipe data and cache. and my phone is detected by Odin.
Need your help. Thanks!
Click to expand...
Click to collapse
I experienced the same,first you prepare odin by selecting files,than when all done fast connect your mobile by usb and as soon ad it is detected click start.bcoz when you delay the port is detected by kies and blocked.
1- ensure that kies doesnt run in the backround. if it is, kill using taskmanager. a simple click on close/exit button wouldnt do, its still running in the backround thus clashing with odin.
2- ensure that if ur using vista/7, run odin with administrator rights. or even better, just disable uac control, its troublesome btw.
3- reboot pc, disconnect phone from pc, take off battery from ur device, leave it around 10seconds, try again.
an0nym0us_ said:
1- ensure that kies doesnt run in the backround. if it is, kill using taskmanager. a simple click on close/exit button wouldnt do, its still running in the backround thus clashing with odin.
2- ensure that if ur using vista/7, run odin with administrator rights. or even better, just disable uac control, its troublesome btw.
3- reboot pc, disconnect phone from pc, take off battery from ur device, leave it around 10seconds, try again.
Click to expand...
Click to collapse
did all you guys suggest but still same error i encounter, i already unistalled kies but same result.
droidtwoseven said:
did all you guys suggest but still same error i encounter, i already unistalled kies but same result.
Click to expand...
Click to collapse
U dont need to go as far as uninstall kies, just kill its process via taskmanager will do. We still need it as one from its component is the usb driver for our device. Maybe when u uninstall kies, it automatically uninstall that particular driver thus making ur device unrecognize by pc. If u already install standalone samsung usb driver, thats another story
Sent from your phone
an0nym0us_ said:
U dont need to go as far as uninstall kies, just kill its process via taskmanager will do. We still need it as one from its component is the usb driver for our device. Maybe when u uninstall kies, it automatically uninstall that particular driver thus making ur device unrecognize by pc. If u already install standalone samsung usb driver, thats another story
Sent from your phone
Click to expand...
Click to collapse
killed kies running apps on taskmanager.
no problem with samsung drivers,i have standalone.
no missing drivers on computer device manager.
Still no luck!
Turn off the phone first then boot to download. The button combination is down plus home plus power. Make sure drivers are installed. Connect it using the original Samsung usb jack. If all is correct and still, no port detected, use another computer.
If that doesn't help, your usb or phone is effed up... ._.
Make sure that you're not in Emergency Download Mode
EmoBoiix3 said:
Make sure that you're not in Emergency Download Mode
Click to expand...
Click to collapse
how to know if im on emergency download mode?
to activate my download mode i press power+volumedownbutton+centerbutton
droidtwoseven said:
how to know if im on emergency download mode?
to activate my download mode i press power+volumedownbutton+centerbutton
Click to expand...
Click to collapse
You're supposed to turn off your phone, then hold volume down plus home, then hold down power. Did you do this correctly at all? You should see in yellow, "downloading..." at the centre of your screen. Then connect the usb.
consegregate said:
You're supposed to turn off your phone, then hold volume down plus home, then hold down power. Did you do this correctly at all? You should see in yellow, "downloading..." at the centre of your screen. Then connect the usb.
Click to expand...
Click to collapse
i did exactly what you have said sir.
Related
after a couple failed odin flashes
my PHONE is STUCK in DOWNLOAD MODE and i can't use ODIN because my PC now says USB NOT RECOGNIZED
ive uninstalled/reinstalled driver
different ports..different usb cables..different pc and still no luck..and yes ive searched xda..and i have yet to find anyone with similar issues..any ideas?
i finally got my phone to work
IT SEEMS LIKE WINDOWS DOESNT BOTHER TO TRY TO INSTALL THE DRIVERS SO YOU HAVE TO DO IT MANUALLY THROUGH DEVICE MANAGER
1) download http://www.multiupload.com/NMPX3KMWRS
this has the 64 & 32 bit driver folders..put which ever one u use on ur desktop
2) open device manager..plug your phone..if your pc says usb not recognized and unknown device shows in device manager..right click..properties..then uninstall it..
3) unplug ur phone..plug it back in then unknow device should show up in device manager..go to its properties then click update driver..the select own drivers..then browse to the 64 or 32 bit folder and click ok then next..it will try to install but you might get a error..
hopefully it will say install gadget serial and fail..that means ur pc kinda recognizes it
then all u ahve to do is from there is go to device manager..go to the properties of gadget serial..update driver..and browse to the driver folder..and it should install..then u have to do it a couple of more times for when it recognizes other samsung devices such as the adb and composite
Instructions here
http://forum.xda-developers.com/showthread.php?t=803492
First, download http://www.multiupload.com/NMPX3KMWRS
This contains Odin, the Samsung Drivers, stock odin rom, updated odin rom, pit file.
If you don't want to lose your settings, etc. you can skip to the second part. If your phone still doesn't work than start from the top.
-PART 1-
Step 1.) Make sure you have the appropriate drivers installed for your phone. If you are on 64bit then choose 64, if you are on 32 choose 32. You may already have the drivers installed and it will tell you after you try to install them.
Step 2.) Power your phone off
Step 3.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 4.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 5.) To ensure your phone is back to stock, in odin you will want to check the repartition button. ONLY CHECK IT WHEN YOU ARE FLASHING BACK TO STOCK. Leave the other check boxes the way they are.
Step 6.) Click the PIT button and select the 512.pit file
Step 7.) Click the PDA button and select Original.tar and then click Start
It should go through a bunch of steps and then your phone will reboot. Below are the steps to update it to the latest release.
Close Odin and power your phone off.
-PART 2-
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
Hope this helps!!!
thanks for the idea..but i know how to do all that...
MY PROBLEM
my PC doesnt recognize my phone and its in download mode so i cant use odin
He gave u the link to the drivers your computer doesn't recognize your phone because the drivers uninstalled themselfs it happed to me also just do it see if it helps k
SmartBrother90 said:
thanks for the idea..but i know how to do all that...
MY PROBLEM
my PC doesnt recognize my phone and its in download mode so i cant use odin
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Thegreat520 said:
He gave u the link to the drivers your computer doesn't recognize your phone because the drivers uninstalled themselfs it happed to me also just do it see if it helps k
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
if you look in my first post i said
"ive uninstalled/reinstalled drivers"
and if i said i tried it on other pcs that would me i would have to install drivers there too..so the driver idea has already been tried..thanks anyway
Hey, I know u said Odin wont recognize your phone, but does your computer recognize that the device or an unknown device has been attached when u plug your phone into the USB. What version of windows are you using.
Jonathan Rubcic
Electrical Engineer
Sent from my SGH-T959 using XDA App
Sorry, u said your computer recognizes that an unknown device is plugged in. Let me see what I can find. If you can get Into download mode, your phone can be fixed!
Jonathan Rubcic
Electrical Engineer
Sent from my SGH-T959 using XDA App
jarubcic said:
Sorry, u said your computer recognizes that an unknown device is plugged in. Let me see what I can find. If you can get Into download mode, your phone can be fixed!
Jonathan Rubcic
Electrical Engineer
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my phone is in the download mode..matter of fact..its the only mode i can get into..but i cant do anything because my pc wont recognize it
I know this seems simple.... But unplug phone, shut down ODIN, re-open ODIN, plug phone back in.
SmartBrother90 said:
after a couple failed odin flashes
my PHONE is STUCK in DOWNLOAD MODE and i can't use ODIN because my PC now says USB NOT RECOGNIZED
ive uninstalled/reinstalled driver
different ports..different usb cables..different pc and still no luck..and yes ive searched xda..and i have yet to find anyone with similar issues..any ideas?
Click to expand...
Click to collapse
same problem here
All~G1 said:
I know this seems simple.... But unplug phone, shut down ODIN, re-open ODIN, plug phone back in.
Click to expand...
Click to collapse
tried that and still nothing
All~G1 said:
I know this seems simple.... But unplug phone, shut down ODIN, re-open ODIN, plug phone back in.
Click to expand...
Click to collapse
yea that doesnt work & it wouldn't. because the pc has to recognize the phone before odin can..an that the issue! thanks tho
I've also got this probem. Did you by any chance install the voodoo thing? Apparently it messes up your phone if you flash over it.
I think I might buy one with a broken screen for 200ish...............but I really hope I dont have to.
Anyone have a fix for this yet?
@xaymaca i finally got mines to work after 48 hours but it seems like it depends on luck
1) download http://www.multiupload.com/NMPX3KMWRS
this has the 64 & 32 bit driver folders..put which ever one u use on ur desktop
2) open device manager..plug your phone..if your pc says usb not recognized and unknown device shows in device manager..right click..properties..then uninstall it..
3) unplug ur phone..plug it back in then unknow device should show up in device manager..go to its properties then click update driver..the select own drivers..then browse to the 64 or 32 bit folder and click ok then next..it will try to install but you might get a error..
hopefully it will say install gadget serial and fail..that means ur pc kinda recognizes it
then all u ahve to do is from there is go to device manager..go to the properties of gadget serial..update driver..and browse to the driver folder..and it should install..then u have to do it a couple of more times for when it recognizes other samsung parts.
it seems like windows doesnt want to install the drivers itself
um, you just tried alot with those drivers and it eventually worked out differently?
RPGbig said:
um, you just tried alot with those drivers and it eventually worked out differently?
Click to expand...
Click to collapse
no basically first i uninstalled the "unknown device" through device manager
then i would plug the phone..go to device manager and update the drive manually..until gadget serial showed up..if not..i repeat the process..
then when gadget serial shows up..update its driver manually..then samsung adb should show up in device manager..it takes alot of time and patience
If your system still fails to recognize your phone. Try installing Mini Kies. Do a quick search there are plenty of download links for that software. Make sure you restart your system after uninstalling the device.
I had similar issues with myn. But eventually got over with by doing a clean install off the drivers.. Hope this helps.
so i did that and it recognized my phone. it says it on the computer and on odin it changed from 0:[COM4] to 1:[COM3]. but it still stays stuck on set PIT file DO NOT TURN OFF TARGET.
Jessejess87 said:
so i did that and it recognized my phone. it says it on the computer and on odin it changed from 0:[COM4] to 1:[COM3]. but it still stays stuck on set PIT file DO NOT TURN OFF TARGET.
Click to expand...
Click to collapse
what tar and pit files are you using, i had similar issues when i tried odin'ing back to ji6. however odin'ing to stock JFD worked beautifully. if you need help finding the proper odin files here is a mirror of them: Odin Mirrors
This happened to me before, and someone mentioned it earlier. Get into device manager on windows, go to the Universal Serial Bus (USB) section, and I uninstalled every option you see in there. Restart your computer and windows will automatically reinstall those items apon reboot. The phone should now be detectable...
EDIT: Fail, it appears you already got it solved...
hey im not sure what tar abd pit files are. im really new to this. question, with the mirror how would i use it? will it still work with my phone trippin lol and not being picked up on my computer.
"firmware update encountered an error please use kies to enter recovery mode "
thats whats coming up on my phone after my pc crashed while i was trying to flash a firmware on odin
now odin doesnt see my phone when i put it in download mode and if i try to enter recovery mode i just get
"firmware update encountered an error please use kies to enter recovery "
i have no problem getting my phone into download mode i just cant get odin to see it to be able to flash a firmware .
any ideas or is there a different program i could use to flash a firmware
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Firstly, no offence but please do not create topics with idiotic titles like "help" which do not describe teh topic in any way other then its a newbie thread.
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
TheATHEiST said:
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
Click to expand...
Click to collapse
i have searched the forums ,my problem is i cant get odin to see my phone and i have tried . i have taken out kies from my pc and kept the drivers for my phone on the pc . so i am just looking for a solution
You need to keep kies on your pc and then use Odin
Tool-kit said:
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed this thread and it said to uninstall kies as it sometimes interferes with odin
odin wasnt seeing my phone when kies was installed and still not seeing it with kies uninstalled either
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
This should not happen... if it does... I'm guessing it's because... when you use kies, USB debugging should be off. And when you use Odin... you should enable USB debugging.
(This way has NEVER failed me... or anyone else I know. Otherwise something else must be up)
themadba said:
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
chris thanks but i even switched off my pc and and nothing in tassk manager is running related to kies
but thanks anyway
Because when you uninstalled kies, you probably removed the usb drivers you need. Try to re-install it and make sure you phone is in debugging mode after... before using odin.
If you don't want to install the drivers with kies, then you need to download and install the samsung drivers yourself.
cyberboob said:
make sure you phone is in debugging mode after... before using odin.
Click to expand...
Click to collapse
my phone wont boot up so i dont know if debugging mode is on and i have installed the usb drivers to my pc .
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
your not kidding lol
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode. If these conditions are met and the phone is connected to the computer via USB, and Odin still doesn't see the phone, you may need to try another computer.
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
i was flashing a firmware and in the middle of it loading onto my phone ,my pc shut down my phone wont boot up . when it starts up it comes up with
two little pc's and it says firmware update encountered an error please use kies to enter recovery
i can get the phone into download mode but kies doesnt see the phone neither does odin .
if i try to enter recovery mode by holding down power ,home and volume up it comes up with the same message about the firmware error .
hope this explains it
ctomgee said:
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode.
Click to expand...
Click to collapse
Then you know something I don't, because from all tutorials I've seen and videos... Odin won't see phone unless debugging mode is enabled.
cyberboob said:
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
Click to expand...
Click to collapse
oh ive tried that too lol
now downloading the drivers again and going to try and reinstall them
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
cyberboob said:
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
Click to expand...
Click to collapse
thanks for all your help , i have a feeling its the usb drivers for some reason
will let you know how i get on
thanks again
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
JoshS2 said:
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
Click to expand...
Click to collapse
Try installing samsung kies. The usb drivers are included.
princeownt said:
Try installing samsung kies. The usb drivers are included.
Click to expand...
Click to collapse
I have it installed, and I installed the USB drivers from the soft bricked sticky in this section. Neither have helped.
Hi!
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
MafiaDroid said:
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
Click to expand...
Click to collapse
I can't even turn the phone on at the moment. Only thing I can do is go into Download mode.
Help
Try this, take out the battery, then press and hold the ON button for 7-10 seconds (the longer the better). Reinsert the battery, then press ON button to start it. This is a soft reset, and wipes the temporary memory and empties all remaining power in the circuits. This helps on many phones and even laptops that won't start properly or show anything on screen.
If this does not work, try the next step. Again, do as above. But after inserting the battery, do not turn the phone on, but press and hold the ON button and the HOME button at the same time for 7-10 seconds. This is a hard reset, and works best if done after a soft reset. Just be sure the battery has at least some juice in it and isn't empty. If possible, try with another battery if this does not work.
Hope this helps!
Try going to device manager, you will probably find your device as an unrecognized device, uninstall the drivers, unplug and then plug it again and see.
if the prblm is hard then do a fresh installation of kies,device etec etc.....but if u have ur device in the device list on pc then first uninstall it...if possible try recovery mode and reset...
I tried everything you guys have suggested and none of that worked. Anyone else got any ideas?
Try everything (and I mean everything) on the following list. Given the problems you've had & that you've already tried some of these things, I'd try another PC. And if it doesn't work first go on another PC, then go thru the list & try everything on the 2nd PC.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again. Also run Windoze Update.
*And if all this fails, try a different PC.
Tried all the above and a different PC.
It didn't work. I could fix the phone if the computer would pick up that the phone's connected - it just doesn't.
Total Removal of KIES including registry entries .
Reboot PC install a new copy of Kies .
Phone backup data and factory reset .
Set phone to USB storage mode using the Samsung cable connect to PC and wait for Windows to find USB drivers .Remove cable reboot phone .
Start Kies connect with cable wait for Kies to find the phone .
Note USB Debugging OFF and cable connects to a direct motherboard port only .
Nothing then only further suggestion would be to Format the PC and start over with a clean Windows install .
jje
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
JoshS2 said:
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
Click to expand...
Click to collapse
That's a forced download mode.
Try a blind flash to a stock firmware from Odin while connected to your computer with the phone on this screen. Even if Odin doesn't seem to register that it's connected. I've heard of at least one person this worked for.
At this point, you really have nothing to lose by trying this.
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
JoshS2 said:
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
Click to expand...
Click to collapse
I know you said you tried a different cable, but that sounds suspiciously like a bad cable.
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
JoshS2 said:
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
Click to expand...
Click to collapse
Now this sounds like a faulty/dirty/bad usb port.
ctomgee said:
Now this sounds like a faulty/dirty/bad usb port.
Click to expand...
Click to collapse
This was my original thought and my reasoning for flashing a stock ROM in the first place!
JoshS2 said:
This was my original thought and my reasoning for flashing a stock ROM in the first place!
Click to expand...
Click to collapse
I in no way recommend this, and not sure I would do it if I ever started having this issue...
BUT - I have heard that some people faced with this condition have fixed it by physically moving the small wafer board inside the USB port with a precision screwdriver (gently!) to a more "centered" position.
If that doesn't work, look at replacing that part. Either via warranty service if you still have it, or a service center.
hello people.
i was trying to flash the kernel from ics 4.0.4 . first i connected it to the computer to flash it from odin. the green thing that was supposed to show up in odin didnt show up. me being dumb, i clicked start on odin for the heck of it. on odin it said fail. on my player there was this weird symbol.
i tried taking out the bettery and then i waited a few seconds. then i turned it on and the same symbol was there. i also tried going into download mode but when i tried it just showed the weird symbol and then turned black and again and again. i also tried going in to recovery which also did the same kind of thing. (bootlooping) . so has anyone experienced this before.
device info:
samsung galaxy player 4.0 (usa version)
terrasilent kernel
rooted
running icyfusion.
any help would be apperciated!
Its basically the same thing as the Download Mode sign. Don't worry about the awkward symbol, just means you are in download mode
Sent from my YP-G70 using xda app-developers app
EcHoFiiVe said:
Its basically the same thing as the Download Mode sign. Don't worry about the awkward symbol, just means you are in download mode
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Its not in download mode though, i TRY turn it off (which I cant cuz the same thing shows again and again.)
ABSOLUTELY no way to turn it on. -.-
the playa! said:
Its not in download mode though, i TRY turn it off (which I cant cuz the same thing shows again and again.)
ABSOLUTELY no way to turn it on. -.-
Click to expand...
Click to collapse
He said that it's the same as download mode. For your information this mode is a forced download mode which means that you need to flash something to get over it. In this case a new kernel.
zaclimon said:
He said that it's the same as download mode. For your information this mode is a forced download mode which means that you need to flash something to get over it. In this case a new kernel.
Click to expand...
Click to collapse
oh im sorry i didnt understand what he meant. but for some weird reason my computer makes the noise but it doesnt show anything as connected... not even unknown device or something. do you guyd have any idea how i could fix this?
the playa! said:
oh im sorry i didnt understand what he meant. but for some weird reason my computer makes the noise but it doesnt show anything as connected... not even unknown device or something. do you guyd have any idea how i could fix this?
Click to expand...
Click to collapse
Try these:
1. Be sure to have anything Kies related not running [as a process] in the background (Task Manager alt+ctrl+delete on your computer)
2. Restart your computer and try the same usb port again (Kies process closed again).
3. Try a different USB port.
4. Try a different usb cord (I have over 4 in my home due to phones).
5. Try a different computer (I have two in my home).
Flash your kernal again as this is usually the case the phone dash exclamation sign icon comes up, odin of course.
da1writer said:
Try these:
1. Be sure to have anything Kies related not running [as a process] in the background (Task Manager alt+ctrl+delete on your computer)
2. Restart your computer and try the same usb port again (Kies process closed again).
3. Try a different USB port.
4. Try a different usb cord (I have over 4 in my home due to phones).
5. Try a different computer (I have two in my home).
Flash your kernal again as this is usually the case the phone dash exclamation sign icon comes up, odin of course.
Click to expand...
Click to collapse
the "forced download mode" sign comes even when the player is not connected to the computer, but I will look at this.
the playa! said:
the "forced download mode" sign comes even when the player is not connected to the computer, but I will look at this.
Click to expand...
Click to collapse
nothing is working.
i think its bricked.
the playa! said:
nothing is working.
i think its bricked.
Click to expand...
Click to collapse
Have you tried flashing back to stock? There is a guide in how to do it, don't do it the odin way - it's too unstable and unpredictable. Flash back to stock with heimdell. Click on my name and you should find my recent past posts (6 to 10 most recent) explaining how to flash back to stock with heimdell.
da1writer said:
Have you tried flashing back to stock? There is a guide in how to do it, don't do it the odin way - it's too unstable and unpredictable. Flash back to stock with heimdell. Click on my name and you should find my recent past posts (6 to 10 most recent) explaining how to flash back to stock with heimdell.
Click to expand...
Click to collapse
i dont think heimdall recognizes it either.
but i will look into your instructions so im sure that i didnt miss anything out.
I ran into this once. What fixed it for me was doing
heimdall close-pc-screen
Click to expand...
Click to collapse
Thanks guys,
its been a while but my laptop DOEST NOT recognize my player when I plug it in my laptop. I uninstalled the drivers and when I try to install the drivers, I get error 10. KIES does not resolve the issue either. Any ideas how to make the laptop recognize the player?
By the way, I tried every USB port.
the playa! said:
Thanks guys,
its been a while but my laptop DOEST NOT recognize my player when I plug it in my laptop. I uninstalled the drivers and when I try to install the drivers, I get error 10. KIES does not resolve the issue either. Any ideas how to make the laptop recognize the player?
By the way, I tried every USB port.
Click to expand...
Click to collapse
uninstall, reboot, re-download drivers, reinstall
also, does you player recognize when it is plugged in? (ie it shows usb connected)
iurnait said:
uninstall, reboot, re-download drivers, reinstall
also, does you player recognize when it is plugged in? (ie it shows usb connected)
Click to expand...
Click to collapse
by reboot u mean the laptop right? And then reinstall the drivers? And the player charges but it says USB Device Not Recognized.
the playa! said:
by reboot u mean the laptop right? And then reinstall the drivers? And the player charges but it says USB Device Not Recognized.
Click to expand...
Click to collapse
put device in download mode
plug into computer
run zadig.exe
options --> list all devices
then in the menu of devices click samsung usb composite device
install driver
in heimdall you wont be able to tell if heimdall recognizes it or not.
this is hiemdall when you first start it up
this should be heimdall when youve added everything in.
now all you have to do is hit start
also both of these pics have comments that will help you. good idea to look at them. also feel free to comment
Sent from my YP-G1 using xda app-developers app
goldflame09 said:
put device in download mode
plug into computer
run zadig.exe
options --> list all devices
then in the menu of devices click samsung usb composite device
install driver
in heimdall you wont be able to tell if heimdall recognizes it or not.
this is hiemdall when you first start it up
this should be heimdall when youve added everything in.
now all you have to do is hit start
also both of these pics have comments that will help you. good idea to look at them. also feel free to comment
Sent from my YP-G1 using xda app-developers app
Click to expand...
Click to collapse
I did all of that but i can't seem to click start... Even th ready button is grey and says 0%
:/
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
1. use a spellchecker.
2. reinstall drivers, uninstall Kies, use a different usb port/cable, use a different version of Odin, use a different pc.
Glebun said:
1. use a spellchecker.
2. reinstall drivers, uninstall Kies, use a different usb port/cable, use a different version of Odin, use a different pc.
Click to expand...
Click to collapse
thank you so much it workt!
Rightclick -> Run as administrator fixed this issue for me.
odin stuck
hy i have the same problem. i have reinstalled the drivers, use another odin, but it still wont connect? pls help
Crniy said:
hy i have the same problem. i have reinstalled the drivers, use another odin, but it still wont connect? pls help
Click to expand...
Click to collapse
Apart from changing cable / motherboard port nothing else can be tried .
jje
JJEgan said:
Apart from changing cable / motherboard port nothing else can be tried .
jje
Click to expand...
Click to collapse
Remove the external sd card,put battery back in phone,again in download mod,and try again flashing via odin...worked for me...
JJEgan said:
Apart from changing cable / motherboard port nothing else can be tried .
jje
Click to expand...
Click to collapse
Try it on someone else's computer, I kept running in to issues, and changed the USB port I was using, removed SD card, unplugged USB cable after I got the "PASS!" message in Odin.
Additionally ensure you have the right files
IceCreamBoris said:
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
Click to expand...
Click to collapse
disconnect internet
Make sure you are in odin mode on the device. I came from HTC One and didn't put my device in Odin mode. Duh.. right? lol.
You can get into Odin mode by doing "adb reboot-bootlaoder"
for the best results:
1.use an official Samsung cable
2. unplug all unneeded usb devices
3.reboot into download mode again
4.connect to a usb 2.0 port on the back of the pc
5.run odin as an admin
if that dose not work, make sure kies is removed, and re-install the Samsung drivers,
reboot pc, and try again.
solved similar problem...
reboot your phone into download mode, but yet not proceed, plug into pc, open odin (as administrator), put the firmware files in their respective places, and finally press vol up to proceed in download mode and press start, it must solve, if all else does not help .. hugs
Hope this helps, if so please press "thanks" ..
sent from my Galaxy Y Duos S6102 ..
About ODIN connection status stucking issue ...(Working solution)
IceCreamBoris said:
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
Click to expand...
Click to collapse
Do one thing when you are trying to connect in downloading , just make sure kies is not running at background.
Thing is kies blocks that connection which you are trying to make. It worked for me as well. All the best.
hp79 said:
Make sure you are in odin mode on the device. I came from HTC One and didn't put my device in Odin mode. Duh.. right? lol.
You can get into Odin mode by doing "adb reboot-bootlaoder"
Click to expand...
Click to collapse
Crap. Did the same stupid thing...
mikeprachar said:
Crap. Did the same stupid thing...
Click to expand...
Click to collapse
Happened to me too. The inductions I was following did not mention download mode.
Whooooo! It worked!
klijakliki said:
Remove the external sd card,put battery back in phone,again in download mod,and try again flashing via odin...worked for me...
Click to expand...
Click to collapse
This worked for me after having so many problems. Nobody was clear on how to fix it. I had soft bricked my phone. It wouldn't connect to Kies or allow any pit or rom being flashed to it. Everything would fail. I tried doing what you said and it worked. I always got the errors 'No pit partition' etc.
I plugged in the USB without the battery in.
Phone wouldn't switch on into recovery without battery in so I put it back in.
I then took it out and Odin wouldn't connect to it and start the process without the battery in so I put it back in.
I loaded up the pit file and started it! You should have seen my face! haha! It worked!
It booted up! Hooray!
I switched it off and booted it in recovery mode.
Installed new rom (hopefully this won't break)
Thank goodness for that. I feel your pain guys. If you need any help just message me.
amongstgeeks said:
This worked for me after having so many problems. Nobody was clear on how to fix it. I had soft bricked my phone. It wouldn't connect to Kies or allow any pit or rom being flashed to it. Everything would fail. I tried doing what you said and it worked. I always got the errors 'No pit partition' etc.
I plugged in the USB without the battery in.
Phone wouldn't switch on into recovery without battery in so I put it back in.
I then took it out and Odin wouldn't connect to it and start the process without the battery in so I put it back in.
I loaded up the pit file and started it! You should have seen my face! haha! It worked!
It booted up! Hooray!
I switched it off and booted it in recovery mode.
Installed new rom (hopefully this won't break)
Thank goodness for that. I feel your pain guys. If you need any help just message me.
Click to expand...
Click to collapse
Remember. You have to take out the SD card!
M47H!AS said:
reboot your phone into download mode, but yet not proceed, plug into pc, open odin (as administrator), put the firmware files in their respective places, and finally press vol up to proceed in download mode and press start, it must solve, if all else does not help .. hugs
Hope this helps, if so please press "thanks" ..
sent from my Galaxy Y Duos S6102 ..
Click to expand...
Click to collapse
Thank you! Worked perfectly.
Issue Solved = Simple Solution
As stated above:
plug in the USB cable - Then Press Volume "UP"
So friggin simple, why isn't this included in All the Instructions??
Switch off the device.. Boot in download mode and then click on start at odin
immediately start downloading !!
worked for me! !