I bought a SGII off ebay and after a few hours of reading I'm totally confused about how to debrand the phone. The original owner received the phone from Vodafone Ireland and rooted it to unlock it. Below are the phone specs
Android- 2.3.3
Baseband version- I9100BUKG1
Kernel-2.6.35.7-I9100XWKE2-CL187606 root-DELL101#2
Build- GINGERBREAD.BUKG2
I just want to get rid of all the vodafone software and other bloatware. Im not interested in rooting the phone.
From my research I should go for the latest XEU firmware (Im in Malta, Europe) which is XWKF3
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
Is this correct? It seems older than what I have.. I dont mind, like I said I just want to debrand without ending up bricking the device. Any help would be greatly appreciated.
takamichi said:
I bought a SGII off ebay and after a few hours of reading I'm totally confused about how to debrand the phone. The original owner received the phone from Vodafone Ireland and rooted it to unlock it. Below are the phone specs
Android- 2.3.3
Baseband version- I9100BUKG1
Kernel-2.6.35.7-I9100XWKE2-CL187606 root-DELL101#2
Build- GINGERBREAD.BUKG2
KG2 firmware
I just want to get rid of all the vodafone software and other bloatware. Im not interested in rooting the phone.
Any stock rom removes branded stuff .
From my research I should go for the latest XEU firmware (Im in Malta, Europe) which is XWKF3
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
KG6 2.3.4
XXKG6
Android 2.3.4
http://forum.xda-developers.com/showthread.php?t=1075278
This package has: PDA:XXKG6| PHONE: XXKG6| CSC:XEUKD1
Download: http://www.multiupload.com/59TL9IL3CJ
If you want XEU UK firmware .
jje
Click to expand...
Click to collapse
Thanks JJEgan, and just to confirm, the only downside to using these Franenstein builds is that I cannot use Kies to upgrade the firmware?
I just installed the firmware below as advised but I'm still seeing all the Vodafone bloatware. Everything went perfectly s described in the official thread. Did I do something wrong?
Factory reset your phone .
Phone should now be
PDA:XXKG6| Baseband : XXKG6| CSC:XEUKD1
jje
Thanks, that worked perfectly!
Related
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Reheat said:
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Click to expand...
Click to collapse
the yellow trianlge means that the phone is rooted! - in other words a custom software is installed in it.
what ROM?
answer---> what would you like? stock looking? - kitchen KH3, Cognition, vilian etc
custom?--->MIUI, CM7
themed?---->litening
and you can continue like this for long time...go to the original android development mate and check the procedure how to flash and how to use CWM i think u may have one installed if there is the yellow triangle...
then check ROM's and atached screenshots - read about thems bugs and problemss and pick one...dont be afraid u can change back or for another one anytime - but i will recomend you back up EFS folder first - there is a topic how to do so in original android thread.
i hope u will find your way
Thanks for the info Hunteres. I think I want to keep my phone stock, so I was wondering which firmware from Intratech's Official i9100 Firmwares thread I should get that would work on At&t. The phone is rooted and does have CWM installed when I bought it. When I upgrade to 2.3.4, do I need to upgrade the Phone: I9100XXKE4 and CSC: I9100XEUKD1 also?
Firmware
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Any rom can be used on any carrier.
If you are getting poor signal or data speed try a different modem, there is also a thread dedicated to getting the correct AT&T apn.
cc999 said:
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Click to expand...
Click to collapse
is the KG5 more perfect than the KG3?
Sent from my GT-I9100 using xda premium
KG3 - HAS VIDEO for Google Voice - This is the only plus - some apps do not work.
KG5 - much better battery life - all apps work - very solid build, no crashes or freezes.
CC
Thanks for all the info. Would KH3 firmware be better than KG5 since it's newer? Do I need to upgrade my current baseband firmware and CSC firmware when I upgrade to a new kernel?
I've read the forums, but couldn't find an answer that I could understand, so I apologize in advance for my question.
I'm in the USA and purchased my SGS2 from overseas a few months ago. For now I would like to stay with a stock ROM, at least until there is a CM7 release.
My current info:
PDA: KF3
Phone : KE7
CSC: KD1 (XEU)
I plug the phone into Kies every once in a while, but I haven't gotten an update in quite some time. So, a couple question:
What region or company phone do I have? I'm guessing it is an unbranded UK phone.
Do I just keep waiting? I can read lots of confusing info about using Odin to load frankenstein roms.
I'm asking because the wifi on my phone does not seem to work well, and I've read that 2.3.4 roms have a fix.
Thanks in advance.
chabby said:
I
My current info:
PDA: KF3
Phone : KE7
CSC: KD1 (XEU)
I plug the phone into Kies every once in a while, but I haven't gotten an update in quite some time. So, a couple question:
What region or company phone do I have? I'm guessing it is an unbranded UK phone.
Correct XEU = UK
Do I just keep waiting?
YES
I can read lots of confusing info about using Odin to load frankenstein roms.
Unofficial path your choice may void warranty .
I'm asking because the wifi on my phone does not seem to work well, and I've read that 2.3.4 roms have a fix.
No fix as no WiFi problem though 2.3.4 or 2.3.5 modems may well work better /
KH3 2.3.4 modem stronger WiFi signal for some .
jje
Click to expand...
Click to collapse
Yes, UK version.
If you want to upgrade through Kies you wont have to wait long as it seems that new XEU version KI4 will be out soon.
Detxe said:
Yes, UK version.
If you want to upgrade through Kies you wont have to wait long as it seems that new XEU version KI4 will be out soon.
Click to expand...
Click to collapse
Its now probable that no further 2.3.4 updates will be issued by providers .
They will get the 2.3.5 release soon and in time release the update to Kies .
jje
Why can't I update firmware through Kies. Everytime I check it says "This is the latest firmware". It seems everyone else has had the option to update with kies for a while now, so why not me? Im on vodafone uk.
Current firmware:
Gingerbread 2.3.3
PDA:KG2
PHONE:KG1
CSC:KE2 (VOD)
Thanks
jumped said:
Why can't I update firmware through Kies. Everytime I check it says "This is the latest firmware". It seems everyone else has had the option to update with kies
Garbage some have updated some phone providers have not updated and probably will skip 2.3.4 as 2.3.5 is rolling out .
for a while now, so why not me? Im on vodafone uk.
You need to ask Vodafone or take phone to Vodafone service centre see if they have an update .Vodaphone update the firmware and push it to Kies server .
jje
Click to expand...
Click to collapse
I have this question also, seems that lots are getting the update.
My details are.
PDA IS I9100BOKG2
PHONE I9100BOKG1
CSC I9I00TMUKF1
ANDROID VERSION 2.3.3
BASEBAND VERSION I9100BOKG1
KERNEL VERSIO [email protected]#2
PDA:KG2/PHONE:KG1/CSC:KF1 (TMU).
Same answer if its provider firmware .
jje
i was afraid of that answer, so am i right in thinking its unbranded sg2`s that are getting this upgrade??
crazydiamond1970 said:
i was afraid of that answer, so am i right in thinking its unbranded sg2`s that are getting this upgrade??
Click to expand...
Click to collapse
Mostly but not always it all depends upon the phone supplier .
Thats why most XDA members go down the unofficial route and many are running KI3/8 2.3.5 .
jje
Thanks JJEgan for your help.
As I got a vodafone branded sgs2 (locked with vodafone) would flashing XWKI8 or XXKI3 from Intratech's rom page be ok?
I read somewhere you should only flash unlocked phones.
I currently have my phone rooted with unsecure BUKG2 stock kernel, other than that its untouched from purchase.
Hi,
I'm desperately looking for the stock firmware that came with my phone that I got from Virgin UK back in Novemeber 2011 as I foolishly flashed the Non-UK ICS the other day without making a note of the revision I already had.Kies then didn't recognise my phone. I've installed a CPW (Carphone Warehouse) ROM for now as I know it supports the Virgin network but I know for a fact that wasn't the same one that was originally on the phone. As when it was connected to Kies, I specifically remember there was a lot of X's in the string displayed as well as an XEU at the end (I think). The CPW ROM string doesn't have either. Basically I believe I had some sort of unbranded UK firmware that was also supported by Kies for future downloads but when looking on FUS I can't find anything from the UK except branded fimware and the CPW one.
I've learnt my lesson but would really like my phone back to it's original state before the official UK ICS update becomes available on Monday. So if anybody currently has a unmodified Virgin Mobile from around that time could they please point me in the right direction in terms of the Gingerbread version revision number they currently have?
Thanks in advance guys. I'm new so please have a little patience.
You can use the PC version of Checkfus (search for it on here/Google) to determine what firmware came with your phone, then search for same on Samfirmware.com.
Thanks. But as I said, I've already tried searching on FUS. And can't seem to find any of the ones I'm looking for. Also all the Intratech links on the sister thread don't seem to be working anymore. Almost as if the site Multiupload.com has been shut down?
I'm ideally looking for firmwares such as these:
PDA: I9100XWKF3,
PHONE: I9100XXKE7,
CSC: I9100XEUKD1
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100XEUKH2
Why these? Because I now know these are what come with Virgin UK contracted phones from around the same time. I finally only found this out a few minutes ago via a Virgin Media forum and seeing what people where posting. And if I'm 100% honest, it's the bottom one that's looking the more "familiar" to me before I started messing with my phone.
Again, thatnks for any help offered. Much appreciated.
Re-read the last 7 words of my post Actually, read the whole thing again. Particular emphasis on the last 7 words.
A simple method would be to wait for Virgin to update the firmware and download via Checkfus .
I doubt if the ICS upgrade on Monday will be any roms bar stock .
In which case even with original firmware Kies has no update for you .
jje
This is original virgin mobile information which i saved before messing around with ics roms. My galaxy S2 is only 3 months old from virgin here in he uk!
Hope It Helps!
MODEL NUMBER
GT-I9100
ANDROID VERSION
2.3.4
BASEBAND VERSION
I9100XXKI1
KERNEL VERSION
2.6.35.7-I9100XWKI4-CL575468 [email protected]#2
BUILD NUMBER
GINGERBREAD.XWKI4
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100XEUKH2
Build Info: Wed Sep 14 20:34:11 KST 2011
Thanks MistahBungle. I have and niether of those packages are listed on the site. JJ yeah I've got the same feeling to be honest. It seems to be the generic European firmware that I had the same as Ezy's. I actuallyy think I've installed this a couple of times via FUS and Odin but always seem to get the "your device cannot update from Kies" message though. Strange as I never had it when it was originally installed. Just "this is the latest firmware". Chaotic! lol
Update: It's worked! I installed Ezy's XEU one last time. I forgot to do a cache wipe before and aftewards on previous tries. It's back to it's original state and no upgrade error message in Kies. Thanks again for helping me out guys.
So JJ, come Monday when UK ICS gets released you recommend not downloading it from anywhere and waiting about 6 months for Virgin to get there act together?
E N
So JJ, come Monday when UK ICS gets released you recommend not downloading it from anywhere and waiting about 6 months for Virgin to get there act together?
Personally i would not bother as long as i had a copy of old Virgin firmware in case of warranty . I would just install a stock UK firmware with CPW CSC if possible once UK ICS is released if i was of a mind to go down the ICS route .
jje
Ok thanks. I'll bare that in mind as I don't intend to go through all of this ever again. :-\
E-Nigma said:
Hi,
I'm desperately looking for the stock firmware that came with my phone that I got from Virgin UK back in Novemeber 2011 as I foolishly flashed the Non-UK ICS the other day without making a note of the revision I already had.Kies then didn't recognise my phone. I've installed a CPW (Carphone Warehouse) ROM for now as I know it supports the Virgin network but I know for a fact that wasn't the same one that was originally on the phone. As when it was connected to Kies, I specifically remember there was a lot of X's in the string displayed as well as an XEU at the end (I think). The CPW ROM string doesn't have either. Basically I believe I had some sort of unbranded UK firmware that was also supported by Kies for future downloads but when looking on FUS I can't find anything from the UK except branded fimware and the CPW one.
I've learnt my lesson but would really like my phone back to it's original state before the official UK ICS update becomes available on Monday. So if anybody currently has a unmodified Virgin Mobile from around that time could they please point me in the right direction in terms of the Gingerbread version revision number they currently have?
Thanks in advance guys. I'm new so please have a little patience.
Click to expand...
Click to collapse
So glad i found this post as I lost my original backup. Downloaded the stock firmware just in case its needed. So thanks.
Hi Folks,
I have a question regarding debranding / updating my S3 (4.1.2)
This is all new to me and with the wealth of information here and elsewhere online I'm a little unsure about the correct files to use.
My S3 was originally on O2 Ireland and it has been unlocked so I can use it on Vodafone Ireland.
The phone is on 4.1.2 and Kies and OTA firmware update both state I have the latest firmware.
So now curiosity has gotten the better of me and I want to manually update to 4.3, and while I'm at it, I want to debrand and just have a stock firmware.
Reading online says the Switzerland firmware is stock and bloatware free.
These are the details...
PDA: I9300XXUGNA5
CSC: I9300AUTGNA1
MODEM: I9300XXUGMK6
If I flash with these, is that all I need to do to debrand and have the latest firmware?
There is a 4.3 Vodafone firmware on Sammobile so I suppose I could use that if the Swiss one didn't work.
As a noob to flashing, ROMS, Odin etc etc I appreciate any advide or guidance.
Thanks
Ciaran
No stock rom is debloated, they all have tons of Samsung rubbish included.
Any firmware for the i9300 will work, just make sure the included modem will work in your country. Usually anything European is fine but you may lose OTA due to wrong CSC.
Current phone details are...
AP : I9300XXELLA
CP : I9300XXELLA
CSC : I9300O2IELL1
Hoping for some more advice!
How do I know if the csc is correct?
This is the Vodafone Ireland file,
I9300XXUGNA5_I9300VFGGNB1_VDI
and the (more generic?) Swiss file,
I9300XXUGNA5_I9300AUTGNA1_AUT
I know the Swiss file won't have any branding, but don't know if the modem and csc settings are correct.
The Vodafone one on the otherhand will have the correct settings but lots of VF bloatware and branding.