Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Reheat said:
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Click to expand...
Click to collapse
the yellow trianlge means that the phone is rooted! - in other words a custom software is installed in it.
what ROM?
answer---> what would you like? stock looking? - kitchen KH3, Cognition, vilian etc
custom?--->MIUI, CM7
themed?---->litening
and you can continue like this for long time...go to the original android development mate and check the procedure how to flash and how to use CWM i think u may have one installed if there is the yellow triangle...
then check ROM's and atached screenshots - read about thems bugs and problemss and pick one...dont be afraid u can change back or for another one anytime - but i will recomend you back up EFS folder first - there is a topic how to do so in original android thread.
i hope u will find your way
Thanks for the info Hunteres. I think I want to keep my phone stock, so I was wondering which firmware from Intratech's Official i9100 Firmwares thread I should get that would work on At&t. The phone is rooted and does have CWM installed when I bought it. When I upgrade to 2.3.4, do I need to upgrade the Phone: I9100XXKE4 and CSC: I9100XEUKD1 also?
Firmware
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Any rom can be used on any carrier.
If you are getting poor signal or data speed try a different modem, there is also a thread dedicated to getting the correct AT&T apn.
cc999 said:
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Click to expand...
Click to collapse
is the KG5 more perfect than the KG3?
Sent from my GT-I9100 using xda premium
KG3 - HAS VIDEO for Google Voice - This is the only plus - some apps do not work.
KG5 - much better battery life - all apps work - very solid build, no crashes or freezes.
CC
Thanks for all the info. Would KH3 firmware be better than KG5 since it's newer? Do I need to upgrade my current baseband firmware and CSC firmware when I upgrade to a new kernel?
Related
Hi guys, i'm thinking i may have to send my G2 back to O2
I love the G2 but as an actual phone mine as become next to useless! 99% of my calls drop out mid call or freeze with the other persons voice freezing mid-sentence and stuttering like a stuck record. At this point the screen usually freezes so i can't do anything with the phone for up to a min (approx) .
I find even if i have full signal, as soon as i go to make a call the signal will drop out completley, showing the circle with a bar through it? I thought it may just be crappy O2 reception but my wife is on O2 and her phone is fine.
Has anyone experienced these problems or similar and can provide a bit of feedbak? Otherwise it's gonna have to go which is a shame cos it's brilliant for everything else
I've now restored my original O2 branded firmware as the phone may have to go back to O2, i've also used a USB jig to reset download counter.
When i type *#1234# it shows:
PDA: I9100XWKE2
PHONE: I9100XXKDJ
CSC: I9100O2UKE1
Build info: Fri May 6 07:48:55 KST 2011
THis is what i was expecting however when i check in Settings > About Phone the Kernel version is: [email protected] #2
How come when i re-flashed the O2 branded firmware did the kernel not get replaced with a non-root kernel?
Any suggestions on how to get rid of the Root kernel would be most welcome
I'm in the process of downloading a full wipe rom so i'll maybe flash this and then re-flash the O2 firmware to see if that removes it?
[email protected] #2
root doesn't mean the phone is rooted.
DELL101 doesn't mean samsung got dell to make the phone either.
That is the original kernel.
HI
Are you sure its root? I dont remember what the stock kernel was for me but have you tried running a root app with success. set cpu is a good one to try you can find it free here on xda.
About your reception issue,
Its the modem/radio that sorts out your reception have you tried different ones? Im on o2 in the midlands i find KG6 modem to be the best for me.
What custom rom where you on? and do you get the same problems with the stock rom?
Actually flashing different modems would be a really good idea.
mynamesteve, pointed KG6, I would also recommend the KH3 modem as well.
Try it before you take it back.
As for rooted kernel, I recommend using speedmod, by hardcore.
LiFE1688 said:
[email protected] #2
root doesn't mean the phone is rooted.
DELL101 doesn't mean samsung got dell to make the phone either.
That is the original kernel.
Click to expand...
Click to collapse
Thanks brother
mynamesteve, LiFE1688
I tried running Titanium backup and it failed so as you correctly suspected it clearly isn't a root kernel.
Also i flashed original O2 firmware
PDA: I9100XWKDD
PHONE: I9100XXKDH
CSC: I9100O2UKD1
and the Kernel version was shown as [email protected] #2.. so there we go
Actually flashing different modems would be a really good idea.
Click to expand...
Click to collapse
Where is the best place to find individual modems? All the firmwares that i have flashed have been a single tar file or zip file containing the 3 components....
Thanks again guys ;p
Sigh, it is even a sticky thread.
Galaxy S 2 Shipped Modem Collection
You can also use rom manager to download it.
Thanks again, i've flashed KG6 firmware so will see how the reception is with it, if there's no change will try KH3 modem...
Nice one
I bought a SGII off ebay and after a few hours of reading I'm totally confused about how to debrand the phone. The original owner received the phone from Vodafone Ireland and rooted it to unlock it. Below are the phone specs
Android- 2.3.3
Baseband version- I9100BUKG1
Kernel-2.6.35.7-I9100XWKE2-CL187606 root-DELL101#2
Build- GINGERBREAD.BUKG2
I just want to get rid of all the vodafone software and other bloatware. Im not interested in rooting the phone.
From my research I should go for the latest XEU firmware (Im in Malta, Europe) which is XWKF3
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
Is this correct? It seems older than what I have.. I dont mind, like I said I just want to debrand without ending up bricking the device. Any help would be greatly appreciated.
takamichi said:
I bought a SGII off ebay and after a few hours of reading I'm totally confused about how to debrand the phone. The original owner received the phone from Vodafone Ireland and rooted it to unlock it. Below are the phone specs
Android- 2.3.3
Baseband version- I9100BUKG1
Kernel-2.6.35.7-I9100XWKE2-CL187606 root-DELL101#2
Build- GINGERBREAD.BUKG2
KG2 firmware
I just want to get rid of all the vodafone software and other bloatware. Im not interested in rooting the phone.
Any stock rom removes branded stuff .
From my research I should go for the latest XEU firmware (Im in Malta, Europe) which is XWKF3
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
KG6 2.3.4
XXKG6
Android 2.3.4
http://forum.xda-developers.com/showthread.php?t=1075278
This package has: PDA:XXKG6| PHONE: XXKG6| CSC:XEUKD1
Download: http://www.multiupload.com/59TL9IL3CJ
If you want XEU UK firmware .
jje
Click to expand...
Click to collapse
Thanks JJEgan, and just to confirm, the only downside to using these Franenstein builds is that I cannot use Kies to upgrade the firmware?
I just installed the firmware below as advised but I'm still seeing all the Vodafone bloatware. Everything went perfectly s described in the official thread. Did I do something wrong?
Factory reset your phone .
Phone should now be
PDA:XXKG6| Baseband : XXKG6| CSC:XEUKD1
jje
Thanks, that worked perfectly!
alright. long story short i bought a factory unlocked GSII (from amazon) parallel import. it is the international version
there is no carrier bloatware. it currently has a vodafone australia SIM in it.
even though the ICS update for the GSII was released today in a few countries, does that mean i still have to wait? id check but i have to get kies to be able to sync to my phone first. working on that now
also, as far as i know, the phone was from france, and the modem firmware is for Poland. im quite interested in knowing some more info about this phone.. where it came from and info about it. here are the details
model number: GT-i9100
android version: 2.3.5
baseband version: i9100xxki4
kernel version: 2.6.35.7
cheers
rankzerg said:
alright. long story short i bought a factory unlocked GSII (from amazon) parallel import. it is the international version
there is no carrier bloatware. it currently has a vodafone australia SIM in it.
even though the ICS update for the GSII was released today in a few countries, does that mean i still have to wait? id check but i have to get kies to be able to sync to my phone first. working on that now
also, as far as i know, the phone was from france, and the modem firmware is for Poland. im quite interested in knowing some more info about this phone.. where it came from and info about it. here are the details
model number: GT-i9100
android version: 2.3.5
baseband version: i9100xxki4
kernel version: 2.6.35.7
cheers
Click to expand...
Click to collapse
via kies if its original firmware .
I suspect yours is not original kernel looks to be later 2.6 and phone 2.3
jje
why would it not be a original kernel?
Just download firmware from this thread
http://forum.xda-developers.com/showthread.php?t=1075278
use Odin for update according to the instructions in the beginning of that thread.
The standard XXLPQ-version should work fine for you (installed it myself yesterday).
There are no problem with your kernel, JJEgan is usually right, but this time I believe he replied too fast
(mixing up Linux kernel version with Android version)
And if you want root, then install correct CF-root kernel from this thread :
http://forum.xda-developers.com/showthread.php?t=1103399
The important thing is that you have the standard international version of SGS2 (i9100), and that seems to be the case. None of the firmwares in the thread above will brick an i9100...
tjtj4444 said:
Just download firmware from this thread
http://forum.xda-developers.com/showthread.php?t=1075278
use Odin for update according to the instructions in the beginning of that thread.
The standard XXLPQ-version should work fine for you (installed it myself yesterday).
There are no problem with your kernel, JJEgan is usually right, but this time I believe he replied too fast
(mixing up Linux kernel version with Android version)
And if you want root, then install correct CF-root kernel from this thread :
http://forum.xda-developers.com/showthread.php?t=1103399
The important thing is that you have the standard international version of SGS2 (i9100), and that seems to be the case. None of the firmwares in the thread above will brick an i9100...
Click to expand...
Click to collapse
I did the XXLPQ install based off this thread
http://forum.xda-developers.com/showthread.php?t=1544487
Worked perfectly.
I have an international version and flashed it with the LPQ Firmware that was released in Europe and works great for me...
How to Install Android 4.0.3 LPQ Firmware on Samsung Galaxy S II I9100
Details on updating to ICS
Hey guys...sorry for asking this noob question...but i got really more n more confused as i read through about all the ics update thread in the forum.
1) can i update manually to the ICS XXPLQ 4.0.3? (right now mine is XXKH3 2.3.4)
2) will it effect my unlocked phone? (my phone is sim free)
3) any effect on the baseband? (Mine is XXKH3)..previously im using iPhone 3Gs and when i jailbreaked including the baseband, i lost all my GPS functions ~~
(i dont want the same thing to happen to my SGS2 ~~
tq in advanve guys....sorry for my poor English.
maliiik said:
Hey guys...sorry for asking this noob question...but i got really more n more confused as i read through about all the ics update thread in the forum.
1) can i update manually to the ICS XXPLQ 4.0.3? (right now mine is XXKH3 2.3.4)
Yes
2) will it effect my unlocked phone? (my phone is sim free)
Yes you will have new OS Android 4
3) any effect on the baseband? (Mine is XXKH3)..previously im using iPhone 3Gs and when i jailbreaked including the baseband, i lost all my GPS functions ~~
(i dont want the same thing to happen to my SGS2 ~~
It will get a new baseband .
jje
Click to expand...
Click to collapse
JJEgan said:
maliiik said:
Hey guys...sorry for asking this noob question...but i got really more n more confused as i read through about all the ics update thread in the forum.
1) can i update manually to the ICS XXPLQ 4.0.3? (right now mine is XXKH3 2.3.4)
Yes
2) will it effect my unlocked phone? (my phone is sim free)
Yes you will have new OS Android 4
3) any effect on the baseband? (Mine is XXKH3)..previously im using iPhone 3Gs and when i jailbreaked including the baseband, i lost all my GPS functions ~~
(i dont want the same thing to happen to my SGS2 ~~
It will get a new baseband .
jje
Click to expand...
Click to collapse
Thnx mate !
btw for my question 2) - will i still be able to make phone call, sms, 3g, etc. using my current telco?...erghhhhh so afraid to update....but i still want the ICS !!!! ~~
Click to expand...
Click to collapse
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there? Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
I am even willing to pay for Mobile Odin Pro and flash it directly from the phone, I read that it's safe and you don't lose any data, although other people were saying that it's better to just start from scratch.
Right now my phone info is the following:
PRODUCT CODE: GT-I9100LKMBMC
pda: I9100XWKK5
PHONE: I9100XXKI3
CSC: I9100XEUKH2
Model: GT-I9100 (shouldn't it have a M at the end?)
Android version: 2.3.6
Baseband version: I9100xxki3
Kernel: 2.6.35.7-I9100xwkk5-CL754841
[email protected] #2
Build number GINGERBREAD.XWKK5
So, could anyone point me to the right direction?
Thanks in advance
I think you have the international sgs2. I have tried flashing the xxlpq ics update and then flashed a custom rom but I encountered a lot of issues. I think the ics update still has lots of bugs so I rolled back to gingerbread using checkrom revoHd v6. So as of the moment all you need to do is root your phone with Odin and CF-root kernel and wait for a stable ics rom
pedro.coba said:
permission to listen
Click to expand...
Click to collapse
I'm also waiting for othjer members' ideas so we can all listen and learn
gixie said:
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there? Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
I am even willing to pay for Mobile Odin Pro and flash it directly from the phone, I read that it's safe and you don't lose any data, although other people were saying that it's better to just start from scratch.
Right now my phone info is the following:
PRODUCT CODE: GT-I9100LKMBMC
pda: I9100XWKK5
PHONE: I9100XXKI3
CSC: I9100XEUKH2
Model: GT-I9100 (shouldn't it have a M at the end?)
Android version: 2.3.6
Baseband version: I9100xxki3
Kernel: 2.6.35.7-I9100xwkk5-CL754841
[email protected] #2
Build number GINGERBREAD.XWKK5
So, could anyone point me to the right direction?
Thanks in advance
Click to expand...
Click to collapse
Are you planning to upgrade to stock ICS firmware or any other custom ICS ROM???
gixie said:
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there? Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
I am even willing to pay for Mobile Odin Pro and flash it directly from the phone, I read that it's safe and you don't lose any data, although other people were saying that it's better to just start from scratch.
Right now my phone info is the following:
PRODUCT CODE: GT-I9100LKMBMC
pda: I9100XWKK5
PHONE: I9100XXKI3
CSC: I9100XEUKH2
Model: GT-I9100 (shouldn't it have a M at the end?)
Android version: 2.3.6
Baseband version: I9100xxki3
Kernel: 2.6.35.7-I9100xwkk5-CL754841
[email protected] #2
Build number GINGERBREAD.XWKK5
So, could anyone point me to the right direction?
Thanks in advance
Click to expand...
Click to collapse
You have a whole lot of options to play with, it all depends how comfortable you feel and what do you want.
For starters, you have upgraded from KG2 to KK5, which is a firmware other then Bell, as Bell never released and update. Because of this upgrade your phone says it’s a I9100 and not I9100M. Mine says the same after I upgraded as well.
I updated my Bell KG2 to ICS (LP7) and so far I don’t have any problems with it. I did have an issue with calls going straight to voicemail, so I installed the LPQ modem, and things have been well. People have complained about battery life, but I don't think it’s bad. I would say pretty close to stock GB if not better.
What you can do is make a Nandroid backup and then upgrade to ICS. You can do it through Odin Mobile if you like, as it won't upgrade your Custom Rom Counter, if that is an item of concern to you. There are other ways to clear the custom rom counter, if you go through ODIN.
I would suggest doing a factory reset with CWM, and clear cache/dalvik cahce. This will be like setting up a new phone. You can also upgrade without the reset that and it will keep all your settings and unlock. You will lose root though, but you can re-root.
I have done it both ways, and I went with the reset in my 2nd try just for my peace of mind. I didn’t have any problems without the reset either.
If you don’t like it, you can always go back to your Nandroid backup, which is what you currently have using CWM.
If you want original bell firmware, then you have to wait until bell releases it.
In the end you are the one to decide. Hope this helps.
Once u unlocked network it won't relock after u flash/update software
Sent from my GT-I9100 using Tapatalk 2 Beta-2
Hi everyody, thanks for the answers...
I guess I want to try the stock first and then move on to some custom roms...
I read a thread about the XEO Rom and was going to try that
What do you think about this?
@sahib - thanks, I was not aware of that...
@warhawk_la - thanks a lot, very helpful bits and pieces; what is the difference between the LP7 rom and the XEO and where did you get the files from (I see tht you flashed a different modem)
gixie said:
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
NO its un locked .
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there?
May not work as Kies needs correct codes .
Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
Your choice but rom for your region and actual phone is always best even as a backup for warranty .
Personally i would not jump on the ICS bandwagon yet .
jje
Click to expand...
Click to collapse
download odin 1.85, official XXLPQ rom, siyah kernel.
flash the lpq rom first
flash the siyah kernel second
now you have last ics and root.
Hi
I've been jailbreaking iphones since they came out but have switched to android now so I'm a noob again!
I bought a new S2 on ebay (sealed) but I'm not sure it's standard UK, I've attached 2 screen grabs.
Could someone please tell me if my phone is rooted? (the [email protected] is what got me thinking)
In case attachments don't work:
Kernel: 2.6.35.7-I9100XWKH1-CL431225 [email protected] #2
Also:
PDA: I9100XWKH1
PHONE: I9100XXKG5
CSC: I9100XEUKH1
And is it possible for me to ugrade to ICS?
I've tried researching here and other websites. Odin is clearly the way to go and I see lots of XXK** and other 5 digit codes which i guess are region/Firmware specific but mine don't seem to match any of these??
Any help much appreciated.
Pretty standard stuff. XEU stands for UK Unbranded. Firmware is an old one though. Follow links in my signature to proceed. ICS has been released though we are still waiting for a unbranded UK version. Enjoy.
Sent from my GT-I9100
Dell is the name of the system on which this kernel was made. It is currently not rooted.
Sent from my GT-I9100
Yeah, Linux formats things as "username"@"computer". Samsung just compile their kernels logged in as root.
Sent from my GT-I9100 using XDA
I looks like you have a standard build.
If you really want to check whether your phone is rooted or not, try downloading the "superuser" app from the market (sorry, "Google Play").
If your phone isn't rooted, it'll tell you.
dnesdlrow said:
Hi
I've been jailbreaking iphones since they came out but have switched to android now so I'm a noob again!
I bought a new S2 on ebay (sealed) but I'm not sure it's standard UK, I've attached 2 screen grabs.
Could someone please tell me if my phone is rooted? (the [email protected] is what got me thinking)
In case attachments don't work:
Kernel: 2.6.35.7-I9100XWKH1-CL431225 [email protected] #2
Also:
PDA: I9100XWKH1
PHONE: I9100XXKG5
CSC: I9100XEUKH1
And is it possible for me to ugrade to ICS?
I've tried researching here and other websites. Odin is clearly the way to go and I see lots of XXK** and other 5 digit codes which i guess are region/Firmware specific but mine don't seem to match any of these??
Any help much appreciated.
Click to expand...
Click to collapse
yes its standard
as u see the CSC :I9100XEUKH1
see the bold letters
and as for as phone root is concr'nd ur phone is not rooted from the company
but u have to do it on ur own risk
as for as ICS rom is concerened u can if u root ur phone with a custom rom of ur choice
for more details about custom ICS roms mail me @ ( [email protected])
Thanks for the info. think I'll just wait for unbranded UK ICS to be released.
Sun90 said:
yes its standard
as u see the CSC :I9100XEUKH1
see the bold letters
Click to expand...
Click to collapse
I have been reading in various places that XEU is a Polish version, is that correct? I'm a bit confused as to whether I have UK or Polish version - should be looking at XEUKH1 or XEUKH1 ??
Thanks
dnesdlrow said:
I have been reading in various places that XEU is a Polish version, is that correct? I'm a bit confused as to whether I have UK or Polish version - should be looking at XEUKH1 or XEUKH1 ??
Thanks
Click to expand...
Click to collapse
For the CSC part, you should be looking at I9100 XEU KH1; U+K is just a mere coincidence.
XEU is the code of the operator or the code of the "unbranded operator" - in my case I use "TPH" which is the unbranded csc for Portugal.
As for the token KH1:
K stands for the year - 2011 (ICS builds are from 2012 so they're L??)
H stands for the month - 11 or Nov (ICS builds have now been following this, though - e.g. LPQ, LP3, ...)
1 is an incremental number for multiple builds in the same month (also, sometimes letters are used)
Thanks.
So with these in mind for my phone:
PDA: I9100XWKH1
PHONE: I9100XXKG5
CSC: I9100XEUKH1
PDA - shows I am using Android version 2.3.4
PHONE - shows I have a phone designed to be used in the UK (XXKG5)??
CSC - shows I have an unbranded european phone??
Is that correct?
So if I upgrade my firmware to a stock UK one then all that would change above is PDA??
But if I upgraded to the Polish version of ICS how would that affect what *#1234#?
corype use
As far as i understand, installing any stock version minded for an EU phone should be the same. All they change is the language, however english should be present always.
I've got the same ROM images, and although I believe the XEU ICS has been released by Sammy yesterday, I'm (still) getting the "Your device does not support firmware upgrade" message from KIES.
I've done a hard reset of the phone, re-installed KIES with the latest version ( repeated on two PCs )...
Is there something funny about these ROM images?
Bought from Phones4U as an O2 Upgrade.
If I have to zap it using Odin, is there a way to save the existing ROM images?