Related
Hello:
Thank you for this site. I am new to all this. I am not yet ready to use a special edition rom, but I was interested in one of the programs, phoneExt. In fact, I'm mainly interested in distinct ringtones. I installed it on my pocketpc 2002 and it worked except for the distinct ringtones. Then I upgraded to PPC 2003. I installed phoneExt and same thing.
Can anyone help out or point me to another product that allows distinct ringtones per caller?
Thanks in advance.
RingtoneX from MTUX is a good software
if you go from 2003 to the special edition rom then you are downgrading
heck my xda1 came with a newer rom that special edition did
Thank you for the replies. I've heard about RingtoneX, but I liked the fact that phoneEXT is freeware. I decided to give it one more try on 2003 (since it was recommended not to downgrade). So I installed it, put a shortcut in the startup, did a soft-reset, assigned a ringtone to my contact (from the windows/rings directory), and it still didn't work. Any ideas? Or do I really have to remove this and use RingtoneX?
Thanks again.
I have the same problem on my i-mate (ppc 2003). Other folks have it work perfectly. There is an other thread about this: http://forum.xda-developers.com/viewtopic.php?t=8788&highlight=
Hope u find it useful
i m using phonExt for long now formerely on my XDA1 and now on my XDA2 both with ppc 2003 and i have no problem playin specific ringtones for every user in my contacts.
just have to put the rings in /windows/rings must be a .wav file
and i define them from the contact list by a long click and the function assign ring tone.
i ve heard many people complaining about phoneext on XDA2 (with ppc 2003).
And i do not understand really, i did nothing specific, just installed the soft and made a shortcut of the exec in the startmenu.
i used in in the extendded personalised rom made with the rom kitchen when i had my XDA1.
well do i have a magic XDA2 or a magic ppc2003 .... i doubt.
I too doubt that you have a magic XDA, but I did all of that. Perhaps my version of the software is older or has bugs. Can you tell me where you got yours or give me a copy (afterall it is freeware)?
Can it be related to the way that phone numbers are in the contacts? For example mine are generally of the format # (###) ###-####, but when I get a call, it does show the contact's name...
I have started a project and decided that before i get to far with it that i would make a post here and see if anyone else has done this yet or is working on it...
Anyway, i am in the process of making 1 cab to install all the settings from the provider, instead of the multiple ones found in the rom and in the ext rom.. Now i am only talking settings, not like the extra bloatware in the roms, like goodlink, BB connect, etc... I have made a cab so far but wont test it till mid next week when my test phone arrives.. So if anyone has done this then lets compare notes, if not then i should be able to release something for cingular soon. Which will come in handy when kyphur releases his cooked rom.... If i can master the cingular one then the other providers shouldnt be a problem...
Let me know what you think, ideas, etc.. i could even go as far as customizing it with some of the tweaks...
This Is A Great Idea. I've Been Looking For A Cab File Like This For Ages, It Would Make Updating The Firmware So Much Less Of A Hassle.
As To Wether Or Not Someones Done It Before You Might Want To Check This Site Out. Although The Settings Didn't Work For Me On Orange UK .
http://www.htcclub.net/en/settings.php
Cheers
This would be a great thing to use with any cooked Rom. Definately woul help those just chomping at the bit to get XDA Live...
Faria has a CAB in his AKU 3.3 Release for WIZARD, with most of the carrier settings. It has a provider selector. Maybe use that with his permission?
I have attached the Folder with all the cabs in that EXT ROM.
OpSet.CAB is probably the "Provider Selector"
what i was talking about was more for the hermes... all of the other cabs i have seen have been for other devices.. and most reg settings are completely different!!!
Aaaaah. If you have one cab ready and especially for CING and need to test it, you can post it here as a test CAB and I can test it for you. And should you need help getting the settings, I can help in that matter too. I could basically take the settings off the Faria one and put it in a format that you could use and PM it to you.
cyberdrakula said:
Aaaaah. If you have one cab ready and especially for CING and need to test it, you can post it here as a test CAB and I can test it for you. And should you need help getting the settings, I can help in that matter too. I could basically take the settings off the Faria one and put it in a format that you could use and PM it to you.
Click to expand...
Click to collapse
I have extracted all the settings and xml files from the latest cingular rom.. i have it put together for the most part just tying up some loose ends on it..
The Settings I meant was for all providers that are available in that folder. If need be, I am available to test the cab for you as I have a spare device that I test things on .
cyberdrakula said:
The Settings I meant was for all providers that are available in that folder. If need be, I am available to test the cab for you as I have a spare device that I test things on .
Click to expand...
Click to collapse
what i was saying is that those cabs are for the wizard... some of the settings and location of the settings in the reg are different on the hermes.. but let me perfect this one before we worry about the other providers...
I would love to have something like this to go along with a rom that is completely bare...
shotgunmark,
im interested in helping with development on this proj... i think the easiest way is to put all settings into an xml file and with .NET2.0 framework and studio 2005 i can write a prog to insert the connection info into the reg...
walshieau said:
shotgunmark,
im interested in helping with development on this proj... i think the easiest way is to put all settings into an xml file and with .NET2.0 framework and studio 2005 i can write a prog to insert the connection info into the reg...
Click to expand...
Click to collapse
i have made 2 xml files already, 1 for the cabs and xml's that install from the OS and 1 for the cabs in the ext rom.. from this i have made a cab, which seems to install about 90% of the way then fails.. i will work on this more in the next few days, will also have more time after my test phone arrives as i wont have to keep jacking around with my phone... After i get this successfully made then with your help we should be able to make an app that will allow you to choose which provider you want and it will install those settings.
I also wanted to note that we will probably want to go the route of the cab file for the different carriers since some of them actually have to install different files specific to them...
shogunmark said:
i have made 2 xml files already, 1 for the cabs and xml's that install from the OS and 1 for the cabs in the ext rom.. from this i have made a cab, which seems to install about 90% of the way then fails.. i will work on this more in the next few days, will also have more time after my test phone arrives as i wont have to keep jacking around with my phone... After i get this successfully made then with your help we should be able to make an app that will allow you to choose which provider you want and it will install those settings.
I also wanted to note that we will probably want to go the route of the cab file for the different carriers since some of them actually have to install different files specific to them...
Click to expand...
Click to collapse
yeah we could work it that way... ill do some more investigation this arvo with testing..
Cab's
walshieau said:
yeah we could work it that way... ill do some more investigation this arvo with testing..
Click to expand...
Click to collapse
FYI, Not sure if this is what you are looking for when you refer to the carrier setting Cab's. Bur the Original Imate JasJam Rom came with a Stack (28) Cabs for EMEA, Aust & NZ.. I have these or they can be sourced from the old ROM's that were on the site.. They also had the selection program also of course.. Not sure if you can just use that, Modify and extend to cover more??
the plan is to implement an application like netwiz on the dopod roms... as this cannot be extracted... it can but will only run on the dopod rom...
I would be very interested in this as well, one of the major things I have missed since leaving my ETEN m600 for the Hermes is that it had operator specific settings for tons of operators including for those of us up north.
any updates on this?
Yea i was wondering what happened with this as well. this would be an excellent cab to have in the extended ROM. or to just have period.
its still on my list.. i didnt forget about it... progress has slowed just a tad due to my work schedule changing every other week (you would think that a 120year old company could get a schedule right)....
shogunmark said:
its still on my list.. i didnt forget about it... progress has slowed just a tad due to my work schedule changing every other week (you would think that a 120year old company could get a schedule right)....
Click to expand...
Click to collapse
i hope to have a beta version ready to test in a few weeks....
im from indonesia,.
I want downgraded to WM6 original but error n I got the text
"FOUND SPL V1.20
DOWNLOAD SPL BEFORE V3.03 IS NOT ALLOWED"
can u help me??
i want back to WM6 original,.
thx b4,.
denaldi said:
im from indonesia,.
I want downgraded to WM6 original but error n I got the text
"FOUND SPL V1.20
DOWNLOAD SPL BEFORE V3.03 IS NOT ALLOWED"
can u help me??
i want back to WM6 original,.
thx b4,.
Click to expand...
Click to collapse
you can't
http://forum.xda-developers.com/showthread.php?t=388213
OMG,.
any body can help me??
we are all waiting for a solution.... more than AP5...
denaldi said:
OMG,.
any body can help me??
Click to expand...
Click to collapse
im working on it
denaldi said:
OMG,.
any body can help me??
Click to expand...
Click to collapse
What part of "you can't" did you REALLY not understand??? YOU CAN'T! Deal with it.
denaldi said:
OMG,.
any body can help me??
Click to expand...
Click to collapse
If you upgrade to AP4 you CANNOT downgrade to anything except the hacked AP3
http://htc-hackers.com/uploads/ap3newspl.zip
darkjedi said:
What part of "you can't" did you REALLY not understand??? YOU CAN'T! Deal with it.
Click to expand...
Click to collapse
Don't be an asshole. YES HE CAN, he just needs to wait for the downgrade tool that hasn't been released yet.
Why do we have so many people on the Athena sub-board with an attitude problem? Treat everyone nicely, they'll treat you nicely.
techntrek said:
Don't be an asshole. YES HE CAN, he just needs to wait for the downgrade tool that hasn't been released yet.
Why do we have so many people on the Athena sub-board with an attitude problem? Treat everyone nicely, they'll treat you nicely.
Click to expand...
Click to collapse
I think the athena boards are quite tame, compared to the Hermes and Kaiser forums...In those forums you will be called 4 letter words for not searching or posting a new thread instead of posting in the proper thread...
Of course, in those forums new roms come out every day, so there is a lot more activity.
techntrek said:
Don't be an asshole. YES HE CAN, he just needs to wait for the downgrade tool that hasn't been released yet.
Why do we have so many people on the Athena sub-board with an attitude problem? Treat everyone nicely, they'll treat you nicely.
Click to expand...
Click to collapse
Has the downgrade tool been confirmed in the works? I am waiting on it or the next version after 4.0 I am not happy with AP 4.0 at all right now to many issues with applications etc
not really confirmed, just few words from the dev team, no ETA ... would be a disaster if this tool is not released...
marka2k said:
Has the downgrade tool been confirmed in the works? I am waiting on it or the next version after 4.0 I am not happy with AP 4.0 at all right now to many issues with applications etc
Click to expand...
Click to collapse
Yes, I am also having some issue with AP4, but I have changed several items and it now at least usable.
1) I removed all keyboards/sips except the default and I added resco keyboard. I believe some of the newer sips like the manilla keyboards were causing me memory issues.
2) I shutoff touchflo
3) I shutoff Vueflow
4) I changed several registry keys to performance setting via sktools.
5) I installed the Opera 8.65 cab and removed the opera 9.x
6) Removed Manilla Dialer
Also, changed a few registry items found in the forums wiki's for universal and kasier.
Most changes above were performed using SKtools, Schaps Advanced config app and PHM Registry editor. I still have issue with the photo album, but i do not use it much.
So for me, it now is a usable device again and better than ap3. DO i wish i could downgrade the SPL and try one of the other wm6.1 rom...Yes
eagle 1 said:
Yes, I am also having some issue with AP4, but I have changed several items and it now at least usable.
1) I removed all keyboards/sips except the default and I added resco keyboard. I believe some of the newer sips like the manilla keyboards were causing me memory issues.
2) I shutoff touchflo
3) I shutoff Vueflow
4) I changed several registry keys to performance setting via sktools.
5) I installed the Opera 8.65 cab and removed the opera 9.x
6) Removed Manilla Dialer
Also, changed a few registry items found in the forums wiki's for universal and kasier.
Most changes above were performed using SKtools, Schaps Advanced config app and PHM Registry editor. I still have issue with the photo album, but i do not use it much.
So for me, it now is a usable device again and better than ap3. DO i wish i could downgrade the SPL and try one of the other wm6.1 rom...Yes
Click to expand...
Click to collapse
could you post wha tregistry dd you change?
i. amvery disappointed without the mail address predicton
beginner said:
could you post wha tregistry dd you change?
i. amvery disappointed without the mail address predicton
Click to expand...
Click to collapse
Sorry, I did not make a list of the reg changes, but most can be accomplished with sktools and/or readng the universal wiki registry edits
As for mail address prediction? Do you mean suggest words etc
did you go into settings, select personal tab, select the input icon, select the word completion TAB,
check suggest words when entering text
Change Suggest After entering to "1 letter" (i think the default is space which does not suggest words until a space is entered, totally useless)
set the other check boxes to your preference!
Remember word completion will store what you type most often, thus the email addresses, words etc
eagle 1 said:
Sorry, I did not make a list of the reg changes, but most can be accomplished with sktools and/or readng the universal wiki registry edits
As for mail address prediction? Do you mean suggest words etc
did you go into settings, select personal tab, select the input icon, select the word completion TAB,
check suggest words when entering text
Change Suggest After entering to "1 letter" (i think the default is space which does not suggest words until a space is entered, totally useless)
set the other check boxes to your preference!
Remember word completion will store what you type most often, thus the email addresses, words etc
Click to expand...
Click to collapse
My problem is in "suggest words". There are options for 1, 2, 3 or 4 words suggested, but is impossible to mark a number. I think again the registry is not very fine. The curious comment is that teksoft keyboard does suggest words, that means AP team deploy this part of the rom only fine with software keyboards but not the phisical one.
This is the worse upgrade I ever made of a device. And no way to solve. I feel stupid after several years testing rom upgrades.
AP 4 is totally unusable for business. Maybe nice youtube video capacity, or maybe music, but no way to have it working.
I am starting to use again a blackberry device I have: totally usable for word prediction, gps really superfast.
come and get it htc wm6 and my wm6.1 for SPL 3.5
http://forum.xda-developers.com/showthread.php?t=390328
[size=+2]YES THERE IS A WAY TO DOWNGRADE.[/size]
I want to try out a more user friendly package before releasing it.
PM me if you want to help test!!
cmonex said:
[size=+2]YES THERE IS A WAY TO DOWNGRADE.[/size]
I want to try out a more user friendly package before releasing it.
PM me if you want to help test!!
Click to expand...
Click to collapse
I just pm you, awaiting ansiosus for your news
irus said:
come and get it htc wm6 and my wm6.1 for SPL 3.5
http://forum.xda-developers.com/showthread.php?t=390328
Click to expand...
Click to collapse
Irus,
I applaud you for releasing this however it does not cure the issue with software not running/incompatiable (I tested using your vanilla release) I believe the software issue we are experiencing is tied to the SPL version someone feel free that knows more than I do jump in
marka2k said:
Irus,
I applaud you for releasing and realize you did this so we would have more of a selection. For those of use hoping this will cure the software not running/incompatabilites etc this however does not cure the issue (I tested using your vanilla release) I believe the software issue we are experiencing is tied to the SPL version someone feel free that knows more than I do jump in
Click to expand...
Click to collapse
Edited to be more specific
Hi there,
This software is an Antitheft and you can use it to track your device when it was lost or stolen. It works catching a formated SMS sent from any phone and then send useful informations back.
You can use it to others objectives, like keep your eye in your child. Use your imagination!
If the thief change your SIM card, you will receive a SMS alerting you and you still can track your device. All you need to do is set an emergency cel number.
RemoteTracker can be added to third part custom ROMs. But, with a hard reset all configurations was lost. Now, RTRegCreate tool can create a configuration file using your PC. ROM cookers can use this DLL to make RT hard reset safe!
I need to learn VisualStudio 2008 and develop to Windows Mobile for professional purposes. I choose to make this projet because thought it might be fun
My Glofish X800 has Panot (from eten-users.eu) custom ROM with WM6.1 and native .NET 3.5, but you can download this .NET version if needed here: http://www.microsoft.com/Downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
The installer CAB file and source code of RemoteTracker can be downloaded here:
http://remotetracker.sourceforge.net
This version answer the commands below:
rt#help - send this list of commands;
rt#ehelp - send this list of commands by e-mail;
rt#cb#<some_tel_number> - turn on the Phone and call the number passed as parameter;
rt#gp#<some_cel_number> - try to get GPS coordinates and send back to cel number passed as parameter.
rt#egp#<some_e-mail_account> - try to get GPS coordinates and send back to e-mail passed as parameter.
rt#pb#<some_cel_number> - Use them to receive your contacts stored in SIM card back. If you do not take the phone back, at least the contacts will be saved.
rt#epb#<some_e-mail_account> - Same as pb, but the message goes by e-mail.
rt#elt#<some_e-mail_account> - This command will start GPS, Log the path about 5-6 minutes and send the KMZ file by e-mail. This file can be opened with Google Earth. Very cool.
rt#go#<some_cel_number> - get 'settings/owner' informations.
rt#ego#<some_e-mail_account> - Same as go, but the message goes by e-mail.
rt#rst - softreset device.
rt#dkz - delete all kmz files.
rt#dsc - delete all contacts in SIM card.
rt#eganfl - Send, by e-mail, a list of all incoming and outgoing calls if you have VITO audio notes installed.
rt#eganf - Send, by e-mail, all incoming and outgoing calls records if you have VITO audio notes installed.
rt#findme - Same as 'gp' command, but ask you if you want to answer the command.
rt#alarm - Just play a sound. Useful when you don't remember where the device is, but you know it's your home.
rt#gi - Send informations about your phone: IMSI and IMEI.
rt#egi - Same as 'gi' but the answer goes by e-mail.
rt#msg - Send a message to be displayed on your device.
The main screen has a tab with help.
I did this project to be multi-language. In this version there is Portuguese (my mother language), English (sorry about it, my english is very bad), Dutch (thanks to Cybermoose, from etenusers) and Spanish (thanks to Popy from etenusers). If you want to make your own translate, I can tell how. Very simple.
If you decide to try RemoteTracker, I would like to read reviews, comments and suggestions. Remember this is a beta version and may contain bugs. Use at your own risk and with caution.
Please see ChangeLog.txt to see the improvements.
For those of you who are having the problem with the help file,
with some strange certificate errors and PIE opening when you start RTconfig, the problem lies with having the default program that opens html set to something besides PIE (Opera 9.5, perhaps)
To fix this, use schap's Advanced Config tool to set .htm and .html files to be opened by:
Code: iexplore.exe file: %1
Originally Posted by xd1936. Thank you very much!!!
Keep RemoteTracker up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here: http://www.modaco.com/content/apptodate/267096/download-apptodate-supported-applications/
After install AppToDate, please download RemoteTracker and run RTConfig or softreset your device to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website: http://remotetracker.sourceforge.net
Cheers,
Joubert Vasconcelos
my apologies if i'm blowing up a bubble here.. but doesn't TrackMe do the EXACT same thing?
nir36 said:
my apologies if i'm blowing up a bubble here.. but isn't TrackMe does the EXACT same thing?
Click to expand...
Click to collapse
I didn't know this software. Very good I think, I'll try later. But I suspect the objectives are different. RemoteTracker works only in silent mode to help you find your device if you loose it.
There is only one user interface to configure few parameters. After that you don't need to use it any more.
All functions are activated by SMS (remotely) and the answers will be by SMS or e-mail. For example you can use your wife's phone to send SMS to your lost phone and then receive GPS coordinates to find it.
If you want to compare RemoteTracker with other software, it's more similar to Mobile Justice, but with more features.
This is first goal of RemoteTracker. The second is help you to retrieve your personal data back. It's not totaly done yet. There is a work in progress.
Hope this answer your question
I think this is fantastic! Great idea! Do you think you can incorperate more CDMA-friendly, not-solely-sim-card features? I'm downloading now
I don't have a CDMA device But I think I can search for informations and then code, but without tests.
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
shantzg001 said:
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
Click to expand...
Click to collapse
I agree and thanks. I did not like the similar software in the market. And I need to learn VS .net, so I decide to make one by my self to learn and also for fun.
S.V.I said:
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
Click to expand...
Click to collapse
One thing I'm thinking is how to reinstall RT automaticaly after a hard reset. May be using external cards, but the autorun feature only works when card in inserted.
Built into the ROM is possible, but only ROM cookers or manufactures can do it.
I think its early to think about it. RT have to me more tested.
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
nir36 said:
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
Click to expand...
Click to collapse
All WIMP does is send an SMS back with the current GPS co-ordinates, very useful but severely lacking compared to what the OP is trying to do. That said it is native PPC code with no need for .NET.
Surely we should commend anyone trying to write alternatives as without that attitude we would all be using Windows with MS Office and browsing using IE. Possibly not the best analogy but it will do.
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
i wasn't complaining. i think it's wonderful people are trying to develope new software. i was just giving reference.
phamhien said:
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
Click to expand...
Click to collapse
When you run RT for the first time, the IMSI of your SIM card is stored. After a new 'boot' this IMSI is verified again. If the new IMSI does not match with the old, you will receive a SMS alerting you. This message has the new number. You must input an emercency mobile number in config tab. This number, of course, must be a mobile number diferent of yours (your wifes, mother, son, or so).
hoolahoous said:
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
Click to expand...
Click to collapse
I have no idea how to get this information! But it's a good idead and I'll search this information.
Greaattttttt !!!
Can help for french translation, if you want to.
naboleo said:
Greaattttttt !!!
Can help for french translation, if you want to.
Click to expand...
Click to collapse
Of course I do! Thank you very much!
Very simple: copy and rename english.xml and english.htm to french.xml and french.html.
Edit both files and just translate ignoring the words between < and > characters (those are "commands").
Edit language.xml file and insert the lines below before </languages> (last line):
<language>
<code>4</code>
<name>Français</name>
<file>french.xml</file>
<help>french.html</help>
</language>
Today I was roaming around some blogs and stumbled upon an article with some tips to protect your "smartphone", they talked about a software called mSafe, I even downloaded it for test.
Anyway, it does mostly what you want to develop. The site is http://www.motionapps.com. Their apps are intended for Treos but mSafe states that it's compatible with WM5.
Just for your reference.
joubertvasc said:
I have no idea how to get this information! But it's a good idead and I'll search this information.
Click to expand...
Click to collapse
Well... I'm not familiar with windows mobile programming but I'm a SIM Card programmer. I don't know if you can access STK commands (commands to the sim card) via the Windows Mobile API's but, if you can, there is a function ("proactive command" using the specific SIM terms) called "PROVIDE LOCAL INFORMATION" that gives you exactly this information (and more)...
Hope it helps...
SETHS V3 FINAL & V3 LIGHTER
Band Patch added thanks to BenMHarvey.
This is the Rom i have been using for the last month, it was going to be the ongoing work from V2.
I have made the decision not to develop Neon Roms anymore, so this is very much my last project. There are a few people that i would like to thank on this forum for their support through my learning process and i wish them best with their future devices. (They know who they are)!
I´m not really to bothered about Rom builds and numbers, my only objective was to find a Rom that worked well with my device. And being happy with this current one i have used it for months.
This Rom is UC compliant, basically you install what you want and have complete control of new cabs that you might want to add on.
Its simple:
1st - Create a document in notepad called SDConfig.txt
2nd - Add this text onto the file:
LOCK:Enabled
CAB: \Storage Card\Cabs\Opera Default Browser Registry.cab
CAB: \Storage Card\Cabs\DiamondCalculatorSkin2.cab
LOCK: Disabled
RST: Reset
3rd - Change or add the name of the cabs you want to install on your device.
4th - Save the file onto the root of your storage card.
5th - Create a Folder called "Cabs" on your storage card and place your cabs there.
Note: The name of the files have to be the same as the ones you typed in the SDconfig file.
Now when you install your new Rom, the cabs will be installed automatically.
Attached is my sample SDconfig file.
ROM LINK V3
http://rapidshare.com/files/139435985/Neon_V3.rar
ROM LINK V3 LIGHTER
Removed Apps:
WLMessenger
Opera
Google Maps
Powerpoint
PDF viewer
Recorder
Some Ringtones
Just in case you prefer a lighter version with more space, besides that exactly the same as V3... And very fast.
http://rapidshare.com/files/140528572/V3_Lighter.rar
Hope all you Neon users enjoy.
Regards,
Seth
thanx for all of your hard work!!!
Yes, great job
Brilliant - Thank you.
hello
i am having an error...
From :
Image Version : 1.36
To:
Image Version : 3.00.000.0
after the 1% i get
Error 244 : Invalid Model ID
this Update Utility cannot be used for your PDA Phone.Please check your Update Utility.
Don't go!
I think you're the only, or one of a few, people developing for the NEON. Your rom's are the only ones I've tried on my NEON that actually work for any ammt of time! Don't go! Was it something we said? The lack of donations? Bummer....Thanks for your hard work and the contribution you made to this forum.
thanks for your great work
I'm with the previous reply. Please don't go, Seth. I just went from V2 to V3 and I finally have a phone that works the way I want. If its a matter of donations, let us know. If we need to be more vocal about a seperate forum, I'll shout it out.
Please, don't stop.
Bump
New Rom added.
Seth does this fix the band issue that was in V2??
Edit: Still suffers from incorrect bands
Works great Seth, its sad to see you leave mate new rom looks great
any screenshots of this ROM?
Looks just like his V2 but better some great additions and lots of handy little things added akes it one of the best roms to flash and go no need for lots of changes
Here are 2 .reg files that contain the correct Band Settings for the HTC Touch Dual 850 (Neon200)
This is attempt 2 at using the attach feature
Keyboard Issues
Hi Seth/Anyone,
I am having trouble with the 20 key keypad in Opera. It doesn't seem to allow input at all. Has anyone had this problem?
I have also noticed you have left of the java VM is there a way this can be added?
Thanks Wookienow.
I have the same problem in Opera 9 and 9.5. It works good in V 8.65.
Telstra Foxtel on Next G - How?
Hi All, thanks to my good friend Mike and seth, I now hope I have a faster NEON200 having just completed the leap of faith and upgraded my workhorse phone However, I miss my Foxtel TV - anyone got a streaming player and a way to have the Telstra WAP Gateway authenticate my NEON200 as a bonafide Telstra device so that I can watch Foxtel TV again? Thank you.
EvilDaifu said:
Hi All, thanks to my good friend Mike and seth, I now hope I have a faster NEON200 having just completed the leap of faith and upgraded my workhorse phone
Click to expand...
Click to collapse
Well I did pick on something else as well as not being able to play Foxtel mobiletv anymore, and that is the calc.exe was missing its skin SpbCalc_P.gif so here it is for those who want to use this O/S ROM by seth. Once you unzip it and drag it over to your NEON, it has to sit in the /Windows directory of your NEON because calc.exe looks for it as /Windows/SpbCalc_P.gif
EvilDaifu said:
Hi All, thanks to my good friend Mike and seth, I now hope I have a faster NEON200 having just completed the leap of faith and upgraded my workhorse phone However, I miss my Foxtel TV - anyone got a streaming player and a way to have the Telstra WAP Gateway authenticate my NEON200 as a bonafide Telstra device so that I can watch Foxtel TV again? Thank you.
Click to expand...
Click to collapse
Well the answer is, after some surfing of this quality forum and also whirlpool, to watch Telstra Foxtel in all its glory (after you've subscribed of course) you just need to change the User Agent in the NEON200 registry from HTC_TouchDual Mozilla/4.0 to HTC_P5530 Mozilla/4.0 and also point your APN telstra.internet through the Telstra WAP gateway proxy of 10.1.1.181:80 and point Pocket Internet Explorer (PIE) to the URL of mobiletv.telstra.com None of this bizo of loading telstra cab files or default i-mate cab files (those cab files don't work and just add irrelevent Telstra and i-mate files to your NEON200).
What's more, by creating 2 different internet accessing connection profiles - one that uses the WAP proxy and one that doesn't - you can still watch all the free stuff on YouTube with the profile that doesn't use the proxy !!!
Work will be happy as well because I can still access my MS Exchange push email from my workhorse NEON200 LOL. Only now I won't feel like throwing it at the wall after it resets when when I want to make a phone call, or simply can't dial international without soft reseting the bloody thing.
Shall post up later how I started off with a slooooow Telstra off-shelf HTC Touch Dual 850 (NEON200) and got to the point where I am today thanks to Seth, Mike and other posters on this forum and on whirlpool. I ain't saying yet I'm happy with what I got, because I haven't had a chance to really use what I have now for any period of time. But I am hoping it will be a lot better than what I had based on comments in this thread
It's late now past 2am and I'm tired after working most of the day on this as well as my day job - what a day !!!