Related
Hi
Wonder if anyone knows how to customise the xda to use different ringtones to different calls received?
Thanks
V
Only solution i know is the tool caller2picture....
With this software you can choose different ringtones and you can add a photo to display on incoming call.
Just try it. There is a free testversion...
Regards
Stefan
Thanks- got it at pocketgear.com
HI Stefan,
Thanks for reply. Just after I emailed you, I found a thread titled caller2picture further down on scrolling the same forum and found the software in pocketgear.com
Will try this out. Anyone with other softwares available besides this?
Cheers
V
You should take a look at http://phonext.oabsoftware.nl.
There you can download PhonExt.
It's small, but effective; and it's free!!!
MTUX
Hi Janevries,
Thanks a lot !!
Great application; in fact I found another one called MTUX RingtoneX (can be found easily in pocketgear.com ) which does almost the same as Phonext and is not free. The advantage of RingtoneX and Phonext is that both can assign a whole category of contacts to a special ringtone and this is something that Caller2picture cannot do. Hopefully the later versions of Phonext can allow one to assign photos to the contact as well.
Cheers
Hopefully the later versions of Phonext can allow one to assign photos to the contact as well.
Click to expand...
Click to collapse
That would be da bomb!
I already love Phone Ext in its current form.
Great job!
Can't get the phonext to work in UK
HI folks,
Just after my last posting, I downloaded the phonext programme and tried to dial from it. Unfortunately, it kept assuming the +1 country code and I could not get the phonext program to dial a UK number. I also have Caller2picture in my XDA and wonder if this is the problem or is there something else I should do ?
Hope someone could help.
Thanks.
Vic
Phonext dial properly but can't assign ringtones
Hi folks,
Found the solution in the General section where there is a posting on Phonext- go to settings, connections, connections and dialling locations and change the country code to 44; somehow by default my country code was 1 and area code 425 !!! Don't know why before using phonext this hasn't affected my dialling but anyway with this change, phonext will dial properly. However, I still couldn't assign ringtone using categories or by the contact menu. Any ideas?
Cheers
Vic
Make sure you use PhonExt v1.2, we had a similar problem with v1.1
(PhonExt will definitely make it in a next version of the Special Edition ROM)
Version just downloaded
Hi
Thanks for reply. The version I used was just downloaded yesterday. Anyway, will try again to see if it works and will let you know.
Just one question though: how is it that previously when I was not using Phonext, the question of country code did not come in? ie all along I was just dialling ok with the country code set at 1 and area code set at 425 by default when I got the phone and honestly I did not know it was set at these values at all !!!
Cheers
Vic
the software does not support midi as ringo tone ..any solution ?
I've purchased MTUX RingtoneX, but it plays always the default ringtone.
Anyone encounters this problem??
bandito66 said:
I've purchased MTUX RingtoneX, but it plays always the default ringtone.
Anyone encounters this problem??
Click to expand...
Click to collapse
MTUX RingtoneX works fine with me
http://bbs.pdafans.com/thread-314364-1-1.html
Look there. I'm not as much experienced as many of you are, therefore I'm asking you first. Is this really wm6 charmer rom?
i don't know, i'm not speeking japanese
well, seems to be...will try today, hope rom will not be japanese :-D
ok nocturne, hoping it will work if so, I'm definatelly gonna have some questions for you
well, just flashed WM6 five minutes ago. something you have to know:
1) this ROM IS wm6 finally !!!
2) YES, this ROM is realy WORKING WM6, including radio rom, camera, bluetooth (maybe it's behaviour is a little bit strange, maybe it is problem of my poor old MA700 bluetooth, which i'm running on Vista - it has never run well even on xp )
3) does not looks to be as fast as some debranded roms with wm5, but seems to be extremly fast as it is in beta stage. fast as roms filled with tmobile junk, if i could compare
4) ActiveSync 4.5 and Viasta's WMDC seems to be working much faster
5) windows update included inside wm6 is looking to do something
6) standart feautures of WM seems to be working correctly...does not look to be somehow special in this way
7) system startup is REALLY FAST - nearly like old iPAQs are...well, not as fast, but it is twice faster than WM5
Finally - this ROM seems to be...hmmm...somehow...little bit...chinese :-(
Willl provide more info if my employer will not kill me - this is not a testing machine, but the only phone i have :-D home I'll survive few days with chinese OS....
nocturne, come on ICQ, waiting for you there
so it's only in chinese
yes, I flashed this rom as well. It works in 100%. We're (me and nocturne) trying to figure out how to replace mui files now so to make it an WWE version.
oh,really cool guys.
It will be possible to donwgrade to a WM5 after the upgrade?
of course.
Working well
Well, I have flashed the ROM as well (2007-03-14_Charmer_WM6_OS_MSYH_Clean_Consam_xBeta) and I think it is very fast (seems to me being faster than all WM5 ROMs I have tried). Chinese is the only "problem", will test it more.
Guys, hope you will manage the translation. Good luck.
EDIT: The only thing not working is Contacts application. Does anyone has the same problem? The applications does not even start.
Radek
no problems with contacts app - but is not mapped to common contact button, that's the only problem i see. calendar is not mapped to its button as well.
have look at smartdialing - it is excellent, finaly no problems using czech characters, no more tweaknig dll's necessary
for the first look, a havedecided that this rom does not contain word, excell etc - my info was wrong. they are just grouped into "office mobile" icon...
some strange behavior still remains - i have lost icons for notes and two other (unknown) apps. their link from program targets some help file, of course chinese running notes executable directly works well - it's strage. i have none application installed as i want to test stability of basic OS, not third party applications...
P.S.: still charmed by fast system bootup, reseting again and again just to se if next bootup will be as fast as previous :-D
Well, I know that it's not mapped to the button. But the application is not running, seems that it's starting but stops immediately. Well, Contacts app is the most important one for me So I revert to WM5 again and wait for other ROM. By the way, which ROM are you using, because there were 4 ROMs to download?
nocturne.op.15 said:
no problems with contacts app - but is not mapped to common contact button, that's the only problem i see. calendar is not mapped to its button as well.
have look at smartdialing - it is excellent, finaly no problems using czech characters, no more tweaknig dll's necessary
for the first look, a havedecided that this rom does not contain word, excell etc - my info was wrong. they are just grouped into "office mobile" icon...
some strange behavior still remains - i have lost icons for notes and two other (unknown) apps. their link from program targets some help file, of course chinese running notes executable directly works well - it's strage. i have none application installed as i want to test stability of basic OS, not third party applications...
P.S.: still charmed by fast system bootup, reseting again and again just to se if next bootup will be as fast as previous :-D
Click to expand...
Click to collapse
Is this ROM originally really Chinese?
Guys when I look into \Windows folder there are many DLL files with .0804 extension. Doesn't that mean that the ROM is originally not Chinese? If I'm not wrong, those extensions are used for translated files (MUI). Other interesting thing is that there are many english file names, eg. in \windows\AppButtons.
What do you mean about that?
melvincz: you could be right. I'm not 100% sure though. Don't even try to delete those files, you're system will freeze at 1st or 2nd splashscreen.
I flashed the 2007-03-24 rom_plus_consam and the contact application works fine for me.
download mirror
can you upload this rom to rapidshare or somewhere else. my download speed from china is terrible. thanks
uploading... will be done in like an hour
Would that be including the English mui files by chance?
http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
no english mui.
vlodeck said:
http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
no english mui.
Click to expand...
Click to collapse
thank you very much
Greetings! I wanted to see if anyone out there is experiencing the same problems and if so then maybe they have already come up with a solution.
A handful of software is locking up my WM6 (TrueNytrals 1.4MS), the most importand of which Marsware Newspanel is locking up the device after resuming wakeup. I also noticed that it does the same thing on some 3.3AKUs that I tried however the 2.2AKUs (Offical QTEK) seems OK.
I love WM6 and find that the amount of energy poured into getting this OS on our Prophets is outstanding!
Could anyone assist me with keeping this GREAT software on my G3 device since the developer has been MIA for a couple of years now and there is little chance that this software will ever move from BETA stage.
Thanks in advance for any assistance!
EDIT: Upon decompiling further, I have found that the NewsPanel.dll code imports from the following in the system files:
commctrl.dll
coredll.dll
aygshell.dll
wininet.dll
Of which there are differences from 2.2AKU to 3.3 and up (one would assume), therefore leading me to a dead-end. Would the system remain stable if one were to replace the above system files with the ones from a 2.2AKU? Furthermore how could one attemp changing these os-locked files?
Should this thread now be moved to "Development and Hacking"?
Anyone could PLEASE help?
Edit AGAIN: I have tried disabling EVERYTHING but the known system processes and also moving to the internal storage... STILL locking up the device.
Anyone?
Has anyone any ideas on this?
If someone has Marsware Newspanel working on their WM6 (ANY Flavour) and it is NOT locking up their device, could you please post here your NewsPanel.dll from your "\Program Files\Marsware\" folder OR PM me? So that I may compare it to my own...
Thanks again!
lets go about this the other way, does newspanel even support WM6 ? (ask them) if so, we can have a look etc. or are you trying to patch this software to work with WM6 ?
Marsware Newspanel lockups
Jesterz, thanks for your reply...
I feel like Wayne "I'm not worthy"... you are like an XDA idol - cool:
I am not sure if NewsPanel is compatible with WM6 and there is no way of contacting the developer due to the fact that he has been missing in action for more than a few years now, NewsPanel and TimePanel being his last releases (even before WM5 came out).
I suppose then to answer your question, I am looking at MODing it to work for WM6, it worked with NO Problems on WM5 up until 3.3AKU. My initial query was to find out if there were others out there that were able to use the software on their WM6 Devices without lockups and IF so then to find out how this is possible, apply it to my own device; in turn assisting others with the same problems. It is by far THE BEST Rss software out there (subjectivity). Maybe it is JUST not possible with WM6 due to internal OS changes, but proding around I have seen some accounts of it working on WM6. Is it solely a problem that all of the WM6 ROMs in the prophet forums here are all based on the same Wizard ROM? I am not sure, however on Prislavs 4b ROM, which is based on a Charmer ROM - NewsPanel locked up as well... TOO many questions.
So IF there are some out there with a WM6 Device AND MarsWare's NewsPanel installed and working, if they could post their device type (ROM type) and possibly their DLL (there shouldn't be any copyright problems due to it being a free BETA edition).
Thanks again.
Jeff said:
Jesterz, thanks for your reply...
I feel like Wayne "I'm not worthy"... you are like an XDA idol - cool:
I am not sure if NewsPanel is compatible with WM6 and there is no way of contacting the developer due to the fact that he has been missing in action for more than a few years now, NewsPanel and TimePanel being his last releases (even before WM5 came out).
I suppose then to answer your question, I am looking at MODing it to work for WM6, it worked with NO Problems on WM5 up until 3.3AKU. My initial query was to find out if there were others out there that were able to use the software on their WM6 Devices without lockups and IF so then to find out how this is possible, apply it to my own device; in turn assisting others with the same problems. It is by far THE BEST Rss software out there (subjectivity). Maybe it is JUST not possible with WM6 due to internal OS changes, but proding around I have seen some accounts of it working on WM6. Is it solely a problem that all of the WM6 ROMs in the prophet forums here are all based on the same Wizard ROM? I am not sure, however on Prislavs 4b ROM, which is based on a Charmer ROM - NewsPanel locked up as well... TOO many questions.
So IF there are some out there with a WM6 Device AND MarsWare's NewsPanel installed and working, if they could post their device type (ROM type) and possibly their DLL (there shouldn't be any copyright problems due to it being a free BETA edition).
Thanks again.
Click to expand...
Click to collapse
I've been away from months so i'm catching up, but I now remember these guys, they also made the weatherpanel, too bad they are MIA, anyway obviously something broke between AKU 2.2 and AKU 3 and higher, as you have already debuged in your posts, it is probably due to change in the files you list, what you could do is create an WM6 rom with older files in it and see if it works....
P.s.
i'm hardly an XDA idol, like way !, no way ! I just like my prophet
Upgrading
Jesterz,
I have never quite ventured into the 'building' stages of the OS, just mainly flashing others' published works. However I am downloading the S-Core kitchen and I will see if I am not able to do just that - replacing the neccessary files to get this soft to work. However if I were to be able to extract the files that I saw from decompiling the dll from an official 2.2 AKU then I could make a CAB file to replace some if not all of the dll's, no? I say this because I have for once an incredibly stable TrueNytral 1.4 ROM with everything working (charging, wifi, bt, IR, etc.) and I would hate to see it gone - "if it ain't broke don't fix it'.
So I suppose now that I have to figure out how to extract these files from my 2.2 Nk.nbf and THEN put them in a CAB and install on my WM6... the learning process begins now...
Any assistance or guidance would be GREATLY appreciated.
Still goin' on...
I have tried about everything now, I have tried to extract all the above-noted DLLs from the official QTEK ROM, but the problem with the PE Headers of the dumped files is stopping me from trying to use them in my WM6. (Yet another problem)
I have looked in the NewsPanel.DLL, but my programming skills are not adequate enough to amend or modify it due to the fact that I don't know what I am doing should I need to change something.
++++ Can someone out there (Guru status sans doute) disassimble the DLL to know how it works and then modify what is making it "lockup" on WM6 (normally within 45 seconds after waking up the device). ++++
I cannot seem to find another (better) RSS reader that offers large RSS Descriptions WITH embedded photos on the today screen:
I have tried PocketRSS - large and nice but no photos
I have tried Insight - nice but NOT large enough
Egress downloads in background but no photos on today screen
Franky newspanel is by far the best, I just cannot seem to get it to work!
Maybe I'm bull-headed, but I don't want to let this go if there is a way to use still use it with WM6- and as I said b4 the developer is MIA.
AnYoNe can HELP?
Hey,
found your post in a search, and I just want to let you know that you are not alone, I have the same problem on an unknown Vanilla ROM and also the current XDA Mobile 6 r2a that I'm running. The exact same symptoms. This is REALLY a shame as I totally agree that it is THE BEST today plugin when it comes to RSS. I'm settling with Egress right now but if anything were to evolve on NewsPanels problems...
If there's ANYTHING I can do with my very limited knowledge in programming, let me know, at least I can beta test, right? I have no problems flashing and re-flashing if needed to get this awesome program back up and running in our WM6s.
Best Regards,
Nik
newspanel
Has any fix this program so it can be run with wm6? sorry about my english
That's strange. Back when I had the PPC-6700, NewsPanel (after a few months) started locking up my phone all the time. Not just on wake-up, but when I tried to do ANYTHING. In fact, it caused me to hard-reset a few imes...
However, now that I've got the HTC Mogul, I haven't had this problem once. Of course last time it just took a while for the problem to show up, but it might also be because I'm using the today plug-in in Spb Diary.
-W&P
p.s. I know this post isn't much help, but I thought maybe knowing it works for me in Diary might help out in some way.
Update
Ok, it seems that the Call to the Connection is the problem here or at least I think so. When we check for it to "Establish a Connection" and you have a GPRS connection it works without any problems. However, if you were to go to Flight mode then it will lock up your device again...
I read somewhere that the developer fell off of a mountain while trying to climb it and consequently expired, so I guess there is no help down that road...
Could or can anyone with some experience with IDA (or the like) dis- and re-assemble the DLL and take out the Establish a Connection problem so that the rest of the world can have Photo feeds on their today screen without waiting for Insight to update for over 8 months now? I confirm that this is working in WM5 of the official flavour, i.e. Qtek 2.20 for S200 WITHOUT the establish connection thing-y.
Otherwise I am trying to learn as I go, but as many of you with graduate degrees in IT will acknowledge - It ain't easy!
Peace...........
Jeff said:
Ok, it seems that the Call to the Connection is the problem here or at least I think so. When we check for it to "Establish a Connection" and you have a GPRS connection it works without any problems. However, if you were to go to Flight mode then it will lock up your device again...
I read somewhere that the developer fell off of a mountain while trying to climb it and consequently expired, so I guess there is no help down that road...
Could or can anyone with some experience with IDA (or the like) dis- and re-assemble the DLL and take out the Establish a Connection problem so that the rest of the world can have Photo feeds on their today screen without waiting for Insight to update for over 8 months now? I confirm that this is working in WM5 of the official flavour, i.e. Qtek 2.20 for S200 WITHOUT the establish connection thing-y.
Click to expand...
Click to collapse
On my HTC Tytn-II with WM6, Newspanel locks up the device even if "Establish a Connection" is disabled/unchecked.
If I have a running copy of an international version of WM6, would it be possible to rip the SIP from it to install on a different localized version of WM6? I am currently trying to get Japanese to work on my English Mogul, and I've kinda grown to like the Japanese SIP in the standalone WM6JP emulator image.
I can't offer any help, but I'd definitely be interested in seeing Japanese input support on my WM6 device. I used to have a few Japanese input methods on WM2002 (a kana keyboard and a a kanji/kana-recognizing transcriber), but I haven't used anything on WM6.
Well, I have succeeded in getting the system to use the Japanese font in system messages and my SMS program, but I have yet to get font linking to work. I have ripped the msgothic.ac3 font from an actual running Japanese WM6 OS, and have exported all applicable registry entries. I plan to make a cab for viewing Japanese tonight after work. The trouble starts with input. Supposedly I have to replace wince.nls to truly enabe full Japanese support, but doing that short of making a rom image for the device has been very buggy in my experience. Just in case I need it, I verified that the Japanese wince.nls has an English locale included, and have ripped it. I am just trying to find out if I can rip the SIP somehow so I don't have to rely on buggy/incomplete software for Japanese input.
http://ookii.org/software/japaneseinput/
You want install Japanese? I can help you this is my speciality
OK, first you need 2 CAB. Since I have both, I will attach to this post. Just run Localize first then run IMEJP and you will have Japanese. They both require reset your titan device after install, so just put it in your SDConfig.txt or install seperate. Now... if you do this, you will automatically type Japanese when you start windows everytime... for many non japanese, this is a problem.
I can help you.
There is a probram that I have. You just run file, pick half width english in top option, left soft key, yes, yes, done.
I hope this help you very much.
Hiromitsu
Localize
IME
Utility
japanese input for windows mobile
japanese input for windows mobile
http://www.mobem.com/products/cestarwm5.php
No! The cab files i post are REAL localization from WinMo JP Localization. CEStar is bad! It have a little trouble about SIP. Please just try my cabs.. I'm a Japanese... lol
i don't have any problems with cestar...
My cab files are microsoft IME 3.1 JP from Windows Mobile 6.0 JP and wince.nls from WinMo 6.1 Japanese... if you use a cestar, it have to do trick workaround for wince.nls and it make a little phone instability. Random lockup, memory leak, etc. You may not experience this problem today, but maybe after a little while you will. It is been my experience... Which you rather use, factory OEM setting or hacked functionality from company like CEStar that designs its usage mostly for Chinese? I even can make an OEM for this for your kitchen... I have experiment with it lately myself, and it works even better than cab file. Please just trust me and try MS IME.
illuminarok said:
You want install Japanese? I can help you this is my speciality
OK, first you need 2 CAB. Since I have both, I will attach to this post. Just run Localize first then run IMEJP and you will have Japanese. They both require reset your titan device after install, so just put it in your SDConfig.txt or install seperate. Now... if you do this, you will automatically type Japanese when you start windows everytime... for many non japanese, this is a problem.
I can help you.
There is a probram that I have. You just run file, pick half width english in top option, left soft key, yes, yes, done.
I hope this help you very much.
Hiromitsu
Localize
IME
Utility
Click to expand...
Click to collapse
Hi. I know this thread is from over a year ago, but I am EXTREMELY interested in those two cabs. However, your link seems to be broken. Any chance you could tell me where to get them from? I have tried just about every thing to get Japanese on my W6.1 Sony Experia, with varied results. I have actually been able to read, I just cant input without the ookii SIP file, and I'd rather be able to have the keyboard convert romaji into hiragana and kanji like CEStar, but without the extremely low quality fonts and non-nativelike conversion settings. Please let me know if you have any new information at this point. All the best.
My method will only work if you can make your own ROM with a kitchen. If you can compile an experia ROM, then send me your email address in a private message.
Anyone "in the know" on what is going on with Microsoft Voice Command?
For those not up to date heres the brief bio:
Microsoft released a rocking WM program that offers true voice recognition on pocketPCs and smartphones. If it didn't come with your carrier's build, it's a $40 upgrade, and well worth it. The latest version is 1.6. Unfortunately, it's been fraught with little issues, mostly related to Bluetooth headset compatibility, but most people still find it indispensable in spite of these challenges. I'm one of those people. The dial by number, and recognition of any name in the address book is invaluable to me, and a "must have" app for my 6800, no matter how badly it works.
The program is at version 1.6, and hasn't been updated in 2 years now.
What's the skinny?
jtg
I agree. I have had the same problems and have searched the net for any info about an update. Like you, I have not been able to find anything about a projected release of a new version. I guess that is just the microsoft way...only 2 years..
I heard a rumor that it was goint to be built into the next version of Windows mobile, but I hope that's not true.
If that happens, hoppefully it will be DCD to the rescue with a port for use all!!!
The real deal:
Ok, to those who haven't been following:
Microsoft DID update the VC software, but it was never released. It seems the Windows Mobile version went to the back burner since they made a deal with Ford Motors to start including the VC technology in the new Ford in-dash stereo systems (que up your mp3's, make calls via your bt phone, etc).
However, there was a test rom floating around for another WM device that had a greatly improved new VC version, which fixed 99% of the problems everyone was having.
This version was extracted and made available as an OEM to load into a kitchen to build into your ROMs.
There is NO .cab installation that I've seen for this version, so you're stuck with either cooking it in, or just replacing the files (there's a zip floating around here somewhere of the files u need to replace to make it the new version, but I don't recall where I saw it).
The OEM can be found in the excellent new PPCGeeks kitchen (ppckitchen.org), which incidentally supported Titan roms now.
For you DCD fans, it seems he hasn't made his rom compatible with the new kitchen GUI, but its relatively simple to make it a basekit. If enough of you push dcd, he might consider doing it... otherwise, you can always copy the OEM directory into DCD's kitchen OEMs.
Try Dutty's Voice Commander
This works for me, it is the best of both versions I have seen of the voice software. There are a couple versions out there, this is the most recent I have found. It is a cab.
I've got VC almost completely working. I cooked it into the DCD ROM. One reg key needs to be changed to get the button on your headset to work. The part I don't have working is the prompt and confirmation comming to the headset. The prompt and confirmation come out of the phone. It takes commands fine through the headset, just no audio until the call is started. Anyone know how to fix that? I'm using a Jawbone.
Dishe said:
Ok, to those who haven't been following:
Microsoft DID update the VC software, but it was never released. It seems the Windows Mobile version went to the back burner since they made a deal with Ford Motors to start including the VC technology in the new Ford in-dash stereo systems (que up your mp3's, make calls via your bt phone, etc).
However, there was a test rom floating around for another WM device that had a greatly improved new VC version, which fixed 99% of the problems everyone was having.
This version was extracted and made available as an OEM to load into a kitchen to build into your ROMs.
There is NO .cab installation that I've seen for this version, so you're stuck with either cooking it in, or just replacing the files (there's a zip floating around here somewhere of the files u need to replace to make it the new version, but I don't recall where I saw it).
The OEM can be found in the excellent new PPCGeeks kitchen (ppckitchen.org), which incidentally supported Titan roms now.
For you DCD fans, it seems he hasn't made his rom compatible with the new kitchen GUI, but its relatively simple to make it a basekit. If enough of you push dcd, he might consider doing it... otherwise, you can always copy the OEM directory into DCD's kitchen OEMs.
Click to expand...
Click to collapse
i prefer the functionality of dcd's kitchen over ppcgeeks.... except for the splash screen thing... but it's all opinion
serfboreds said:
This works for me, it is the best of both versions I have seen of the voice software. There are a couple versions out there, this is the most recent I have found. It is a cab.
Click to expand...
Click to collapse
Does this version require you to set tags for contacts?
Thanks
roninld said:
Does this version require you to set tags for contacts?
Click to expand...
Click to collapse
No, it doesn't require you to set tags, but provides that as an option. The tags are useful for frequently called numbers as they should reduce errors somewhat.
This version also works properly through my bluetooth headset including confirmations.
-dwdoc
ok, here is what I did to get it working with DCD:
1. Take the voice command folders from ppckitchen and put them in the OEM folder. There are two folders for the newest version
2. Cook your rom
3. Change the button assignment to VC if you want (settings -> buttons)
4. HKLM\Software\OEM\VoiceCommand change "path" to "\windows\voicecmd.exe"
5. HKLM\Software\Microsoft\Bluetooth\AudioGateway change "BTAGExtModule" to "vcbthag.dll"
Hope that helps you guys!
P.S. On the handset the initial voice prompt beep doesn't work.(the first time you press the button)NOT USING HEADSET
When you dial by the headset the little dial tones come out the handset.
This also lets the phone send ring tones to your headset when it is ringing.
Dishe--thanks for the tip, I googled and found a cab--I have voice command 1.6.17913, and it is a significant improvement over the one I purchased. I can now use my BT headset like I did with my old 6700!! Can anyone confirm this is the most recent build?
jtg
1.9.19209 is available as an OEM in the PPCGeeks Kitchen, but I don't know if there is a CAB of it anywhere.
JimSmith94 said:
1.9.19209 is available as an OEM in the PPCGeeks Kitchen, but I don't know if there is a CAB of it anywhere.
Click to expand...
Click to collapse
I just went through the Kitchen process described above and I get a version number of 1.6.19209. Perhaps just a typo?
whbell said:
I just went through the Kitchen process described above and I get a version number of 1.6.19209. Perhaps just a typo?
Click to expand...
Click to collapse
The Tip in option.xml for this version says, "Microsoft Voice Command - Latest version from kaiser". No2Chem shows as the author, so maybe he will chime in.
JimSmith94 said:
The Tip in option.xml for this version says, "Microsoft Voice Command - Latest version from kaiser". No2Chem shows as the author, so maybe he will chime in.
Click to expand...
Click to collapse
This is what I see also.
<?xml version="1.0" encoding="UTF-16" standalone="yes"?>
<Items>
<Item name="Microsoft Voice Command" group="Voice Control" checked="True">
<Tip>Microsoft Voice Command - Latest version from kaiser</Tip>
<Guid type="p">410788f1-acd5-457b-b9ea-df86ac7f990e</Guid>
<OEMDate>3/30/2008</OEMDate>
<AppVersion>1.6.19209</AppVersion>
<AppAuthorURL>http://www.microsoft.com/windowsmobile/</AppAuthorURL>
<ButtonType>GroupRadioNone</ButtonType>
<OEMAuthor>No2Chem</OEMAuthor>
<Require>93f31b6d-078b-4dae-a335-8ea8c3b22c97</Require>
</Item>
</Items>
I believe it was just a typo and he meant a newer build of 1.6. I have the 1.6.19209 installed from the kitchen and can not seem to get voice dialing to work when I dial by name though. It recognizes the command and will ask me if I want to dial work, home, cell, etc. However, when I confirm it never actually dials. It will work fine if I tell it to just dial a number though. Anyone else experiencing this and know of a fix?
djlenoir said:
I believe it was just a typo and he meant a newer build of 1.6. I have the 1.6.19209 installed from the kitchen and can not seem to get voice dialing to work when I dial by name though. It recognizes the command and will ask me if I want to dial work, home, cell, etc. However, when I confirm it never actually dials. It will work fine if I tell it to just dial a number though. Anyone else experiencing this and know of a fix?
Click to expand...
Click to collapse
There are 3 olders in the PPCKitchen. Voice Command 1.6 (which is the 1.6.17 version), VoiceCommand (version 1.6.19), and VoiceCommand_Lang_0409 (supports files for 1.6.19). I threw the VoiceCommand_Lang_0409 into the SYS folder in DCD kitchen, and VoiceCommand into the OEM. Cooked with no problems.
Have no issues with VC not dialing a contact.
roninld said:
There are 3 olders in the PPCKitchen. Voice Command 1.6 (which is the 1.6.17 version), VoiceCommand (version 1.6.19), and VoiceCommand_Lang_0409 (supports files for 1.6.19). I threw the VoiceCommand_Lang_0409 into the SYS folder in DCD kitchen, and VoiceCommand into the OEM. Cooked with no problems.
Have no issues with VC not dialing a contact.
Click to expand...
Click to collapse
Sorry, which kitchen? I can't find those files...
88fingerslukee said:
Sorry, which kitchen? I can't find those files...
Click to expand...
Click to collapse
After you install the ppcgeeks buildos and update, there is a kitchens folder. In there, PPCGeeks_OEM.rar has these folders.