[Q] Phone Answers in Speaker Mode - Atrix 4G Q&A, Help & Troubleshooting

Sometimes when I answer my phone or even make a call it defaults to being in speaker mode. Anybody experience this and know how to fix it? Thanks.

lexx210 said:
Sometimes when I answer my phone or even make a call it defaults to being in speaker mode. Anybody experience this and know how to fix it? Thanks.
Click to expand...
Click to collapse
same here. it started when flashed πCrust.

It has started with my phone as well. I'm rooted but with stock rom..happened to me twice today.
Sent from my MB860 using Tapatalk

happened to me today too, rooted, unlocked, stock GB. Also happened to my girlfriend on her 100% stock, non-rooted HTC Thunderbolt....

Anyone have a solution? Maybe it gas to do with the proximity sensor?
Sent using my Atrix Aura 4G.

I just got an update for my GO SMS Pro and it said it fixed this problem! Does everyone else use that app? The latest version apparently fixes it.
Update: Seems to have fixed it for me! I tried calling myself numerous times and nothing! It was apparently a bug that when you use the app and then place a call/receive one the speaker defaults to on the first time.

lexx210 said:
I just got an update for my GO SMS Pro and it said it fixed this problem! Does everyone else use that app? The latest version (3.6.1) apparently fixes it!
Click to expand...
Click to collapse
Hmmm...I'm on 3.66 right now...also where do you see that it says it fixes this?

kshiuan said:
Oh wow hopefully that fixes it...
Click to expand...
Click to collapse
Hit thanks if it does

lexx210 said:
Hit thanks if it does
Click to expand...
Click to collapse
Where do you see it fixes this? Mine has been defaulting to speakerphone even though I've been on the latest version for awhile...

kshiuan said:
Hmmm...I'm on 3.66 right now...also where do you see that it says it fixes this?
Click to expand...
Click to collapse
Yeah sorry I meant 3.66. In the Description of the update I got this morning it says it fixes it.

kshiuan said:
Where do you see it fixes this? Mine has been defaulting to speakerphone even though I've been on the latest version for awhile...
Click to expand...
Click to collapse
Perhaps you haven't gotten the update yet in the Market. I see it at the bottom of the description section (I'm still using the older Market)

Yessssss it's fixed!!!
Sent using my Atrix Aura 4G.

kshiuan said:
Yessssss it's fixed!!!
Sent using my Atrix Aura 4G.
Click to expand...
Click to collapse
Awesome, I'm glad I could help.

Yep fixed it for me too, thx a lot, it was driving me crazy !!!

fixed! just get the Go sms update

This happened to me on my 1st HTC Inspire shortly after I rooted and flashed CM7. I was able to revert back to stock and exchange for a new one, however within a week, the second one started doing the same thing. That's when I took it back and got the ATRIX.
I thought it was a hardware problem. If its software, what app is causing this? And is it built into android, or a standalone app?

zoness said:
This happened to me on my 1st HTC Inspire shortly after I rooted and flashed CM7. I was able to revert back to stock and exchange for a new one, however within a week, the second one started doing the same thing. That's when I took it back and got the ATRIX.
I thought it was a hardware problem. If its software, what app is causing this? And is it built into android, or a standalone app?
Click to expand...
Click to collapse
It was Go SMS Pro that seemed to cause it. The latest update fixed it for me though.

and i thought my fone was retarded. nice find

This fixed mine! Nice find, Thanks!!

Hell ya, just fixed it with the 3.66 update.
Had to reboot my Atrix for it to take effect.

Related

7/26 MR4 Update -Mandatory?

According to http://www.droid-life.com/2010/07/1...feed&utm_campaign=Feed:+DroidLife+(droid+life) there will be an update to Eris phones. One thing I wonder about is they are calling this mandatory.
What happens if you don't install this? I know Verizon tracks who installs patches and I don't want to take chances losing root.
yeah I'm running EvilEris3.0 on my wife's Eris. I'm actually wanting to go back to the stock 2.1 cause shes not happy with how her phone is acting.....wondering if this will put it back to stock or HOW do I flash it back to the stock ROM?
any help with this would be thankful.
Ok lets not, panic. You need to read the entire thing, and point out that if you have MR3 then MR4 is mandatory but if you only have MR2 then it is only recommended meaning if your current rom has OTA working and you have MR 2 you will be able to ignore the update. If you have MR3 (MR being maintenance release) the update will be eventually be installed for you if you don't do it voluntarily. and you cannot get a replacement for any problems that this is suppose to address if you do not install it
Hey this shouldn't be a big deal. This same update was sent out sometime at the end of last month and those who were rooted were able to root back instantly. Even the 1.49 people. (Assuming you have luck with ADB recovery)
So it will just temporarily remove root?
Hungry Man said:
So it will just temporarily remove root?
Click to expand...
Click to collapse
Pretty much from what I've seen.
And all we have to do is reflash recovery like we did the first time? That's not so hard.
ScottytheIncredible said:
yeah I'm running EvilEris3.0 on my wife's Eris. I'm actually wanting to go back to the stock 2.1 cause shes not happy with how her phone is acting.....wondering if this will put it back to stock or HOW do I flash it back to the stock ROM?
any help with this would be thankful.
Click to expand...
Click to collapse
Put her on Ivan's Eris_Official.
No strange/unpredictable behavior. Ever.
I'll just wait for someone to run diffs on it vs the leak4rombase version and see what we can get from it.
Okay with this new root method and all I'm curious as to know if this MR4 is going to stop us from rooting this method. The old method wasn't stopped, but obviously not everyone can do that method.
pkopalek said:
Put her on Ivan's Eris_Official.
No strange/unpredictable behavior. Ever.
Click to expand...
Click to collapse
Actually, i could never get app web views to work on ivans because it uses the leak. I have since install xtra and plainjain with no issues (on metro pcs)
Sent from my Eris using XDA App
pkopalek said:
Put her on Ivan's Eris_Official.
No strange/unpredictable behavior. Ever.
Click to expand...
Click to collapse
He is 100% correct.
What does it mean when it says MR?
Nomad145 said:
What does it mean when it says MR?
Click to expand...
Click to collapse
Maintenance Release
Received the update this morning. Phone is snappier, phone dialer lag is gone. ?on Bluetooth, as I really don't use it.
Sent from my Eris using Tapatalk
gemro311 said:
Received the update this morning. Phone is snappier, phone dialer lag is gone. ?on Bluetooth, as I really don't use it.
Sent from my Eris using Tapatalk
Click to expand...
Click to collapse
I keep getting prompted to install it, but I'm reluctant to do it since I have root! Damn!
lostpilot28 said:
I keep getting prompted to install it, but I'm reluctant to do it since I have root! Damn!
Click to expand...
Click to collapse
You are able to re-root after running it using the new root method that came out last week.
I didn't notice any real improvement...soon after had a silent call V_V
Sent from my Eris using XDA App

[Q] Gingerbread Bluetooth Discoverable Always ON

Guys, i am having problems getting my car to automatically sync with the Atrix every time i get into the car. I noticed that my car only fins the Atrix when Bluetooth Discovery mode is ON.
Does anybody know how to leave this option always enabled? An application to do that? A config file?
Thanks in advance
Noone with this problem? No ideas how to solve this?
luizffgarcia said:
Guys, i am having problems getting my car to automatically sync with the Atrix every time i get into the car. I noticed that my car only fins the Atrix when Bluetooth Discovery mode is ON.
Does anybody know how to leave this option always enabled? An application to do that? A config file?
Thanks in advance
Click to expand...
Click to collapse
What ROM or firmware are you running? That ROM or firmware you are running could have that issue.
Voelker45 said:
What ROM or firmware are you running? That ROM or firmware you are running could have that issue.
Click to expand...
Click to collapse
I'm using Faux 1.6 kernel and Alien 4, i don't think that's a issue on Alien or the kernel, other users on google have the same problem using Gingerbread stock...
I tried CM7 for a while and it worked no problem thou... Just waiting for a better CM7 release to use it as my main OS.
Meanwhile i'm trying to solve this problem...
luizffgarcia said:
I'm using Faux 1.6 kernel and Alien 4, i don't think that's a issue on Alien or the kernel, other users on google have the same problem using Gingerbread stock...
I tried CM7 for a while and it worked no problem thou... Just waiting for a better CM7 release to use it as my main OS.
Meanwhile i'm trying to solve this problem...
Click to expand...
Click to collapse
I am curious, have you tried it without the kernel and see what happens?
Sent from my ATRIX 4G XDA Premium App
Voelker45 said:
I am curious, have you tried it without the kernel and see what happens?
Sent from my ATRIX 4G XDA Premium App
Click to expand...
Click to collapse
I am an international user, i can't run Alien without the kernel, also, i tried CM7 with this same kernel and it worked just fine, connected with my car every time, it's got something to do with Gingerbread...
luizffgarcia said:
I am an international user, i can't run Alien without the kernel, also, i tried CM7 with this same kernel and it worked just fine, connected with my car every time, it's got something to do with Gingerbread...
Click to expand...
Click to collapse
Oh ok. Well now i am stumped. Lol. I don't have a car so I can't test other versions for you. Don't have the money. Lol. Well I hope some solution comes to you soon.
Sent from my ATRIX 4G XDA Premium App
Voelker45 said:
Oh ok. Well now i am stumped. Lol. I don't have a car so I can't test other versions for you. Don't have the money. Lol. Well I hope some solution comes to you soon.
Sent from my ATRIX 4G XDA Premium App
Click to expand...
Click to collapse
Thanks man, if nothing helps, CM7 will soon

[Q] Bootlooping!?!?!?!?!?!?!

Ive been putting new roms on my rezound and when i put on newtoroots ics sense 4 rom it started doing this. I put stock rom back on and still doing it... i tried this http://forum.xda-developers.com/showthread.php?t=1394659 but still did nothing... please help
I have the same issue with OnE XxX. I'm running the latest RUU right now to see if it fixes it. I'll update shortly and let you know.
[edit] well, what do you know. That actually worked. Weird.
http://www.androidfilehost.com/main/-Support_Files-/RUU/Vigor/RUU_Vigor_3.14.605.10_PH98IMG.zip
LunaticSerenade said:
I have the same issue with OnE XxX. I'm running the latest RUU right now to see if it fixes it. I'll update shortly and let you know.
Click to expand...
Click to collapse
Whenever you use the dial pad, does it freeze and restart?
I had some super epic bootlooping whenever I did anything. It was pretty sweet.
I'm re-RUUing right now. My data is being funky, so I'm going to do a stock factory reset.
LunaticSerenade said:
I had some super epic bootlooping whenever I did anything. It was pretty sweet.
I'm re-RUUing right now. My data is being funky, so I'm going to do a stock factory reset.
Click to expand...
Click to collapse
Did that work?
schust3r5 said:
Did that work?
Click to expand...
Click to collapse
It did. Finally got it all set up, and it's nice.
Sent from my evolving Rezound.
LunaticSerenade said:
It did. Finally got it all set up, and it's nice.
Sent from my evolving Rezound.
Click to expand...
Click to collapse
Can you help me out? How do you fix it?
schust3r5 said:
Can you help me out? How do you fix it?
Click to expand...
Click to collapse
I fixed it!!!!!!!!!!!!!!!!!! i Just flashed the gb firmware patch and it works now.
i remember i flashed it before but i guess i had to do it again.

No Voice or Data service after install of CM9

I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
jefsong said:
I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
Click to expand...
Click to collapse
Is it finding sprint signal? You may have to call them and do a hand-free activation. I can't remember the dialpad # but what it does is reset the phone's profile data and reactivates it on your sprint number. You'll need your MSL, too.
Im seconding this and I am freaking out right now!!
jefsong said:
I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
Click to expand...
Click to collapse
You should try to ODIN back to stock.
This should also not be in DEV section, but in General. You will be blazed.
Also - I am using the CM9 and besides a FC on boot - it works great!
This happened to me before, I wasn't on CM9 but I ended up restoring the stock firmware and updated profile and PRL, then rebooted and it worked fine
Sent from my SPH-L710 using Tapatalk 2
fergie716 said:
This happened to me before, I wasn't on CM9 but I ended up restoring the stock firmware and updated profile and PRL, then rebooted and it worked fine
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the quick replies. I am sorry about putting this in the wrong thread. I realized it after I hit submit.
jefsong said:
Thank you for the quick replies. I am sorry about putting this in the wrong thread. I realized it after I hit submit.
Click to expand...
Click to collapse
It happens. Personally I would like to see device specific Q&A/General threads. Would be a lot easier I think
Hope that helps tho
Sent from my SPH-L710 using Tapatalk 2
jefsong said:
I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
Click to expand...
Click to collapse
Try going into the Mobile networks settings menu and just change the Network mode. Switch the setting and let it reboot, see if it helps.
I had an issue like this. If you get an error when you try to call someone let it play through and it should call sprint and they'll fix it for you. No questions asked.
Sent from my SPRINT GALAXY S III
thetony said:
I had an issue like this. If you get an error when you try to call someone let it play through and it should call sprint and they'll fix it for you. No questions asked.
Sent from my SPRINT GALAXY S III
Click to expand...
Click to collapse
I never let it play through. I had no idea that happens! Good tip!
Sent from my SPH-L710 using Tapatalk 2
fergie716 said:
I never let it play through. I had no idea that happens! Good tip!
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't let me even make a call. I am going to have to try to flash a the stock rom and see where that gets me.
jefsong said:
It doesn't let me even make a call. I am going to have to try to flash a the stock rom and see where that gets me.
Click to expand...
Click to collapse
Yea try using Odin and get back stock firmware, then update PRL/Profile and reboot
similar situation. phone info doesnt know MIN or number but it all works. I second the stock in ODIN, update profile/prl/activate and try flashing again
billard412 said:
similar situation. phone info doesnt know MIN or number but it all works. I second the stock in ODIN, update profile/prl/activate and try flashing again
Click to expand...
Click to collapse
Not sure what to do next. I used ODIN to load the stock Samsung ROM (KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar) and I still no mobile services. Is the firmware a not included in the ROM. Is it a separate flash?
Try the below, it just reset and activated my device (again, lol). No MSL# required.
##72786#
samcintron said:
Try the below, it just reset and activated my device (again, lol). No MSL# required.
##72786#
Click to expand...
Click to collapse
THAT WORKED! Thank you so much. I gotta make sure to right that one down. lol
jefsong said:
THAT WORKED! Thank you so much. I gotta make sure to right that one down. lol
Click to expand...
Click to collapse
Lol ditto
Sent from my SPH-L710 using Tapatalk 2
Had the exact same situation and just threw everything in the book at it, wish I would have found this thread earlier!! The person who posted the dialer code is a da' freakin' man!
Edit: Here's my question - What caused this?!?
DutchDogg54 said:
Had the exact same situation and just threw everything in the book at it, wish I would have found this thread earlier!! The person who posted the dialer code is a da' freakin' man!
Edit: Here's my question - What caused this?!?
Click to expand...
Click to collapse
In my case I believe I inadvertently installed the LG2 OTA as I was getting ready to flash a new ROM. So when the new ROM loaded it was a different firmware. It was a freakin nightmare to get things back in order and yes, the ##72786# was a huge help. I had to flash all the way back to stock recovery just to set things straight. But now at least I know to make sure the basecode matches the ROM.
fergie716 said:
Lol ditto
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
DutchDogg54 said:
Had the exact same situation and just threw everything in the book at it, wish I would have found this thread earlier!! The person who posted the dialer code is a da' freakin' man!
Edit: Here's my question - What caused this?!?
Click to expand...
Click to collapse
jefsong said:
THAT WORKED! Thank you so much. I gotta make sure to right that one down. lol
Click to expand...
Click to collapse
Glad I could help but it was Ascertion's post that gave me the hint.

Angry [ROM] 08-26-2012 LIQUID-DESENSED36 *v1.1* JMOD Bluetooth Crash/bootloop

Didn't see anywhere in the thread if the bluetooth was or wasn't working. Just though I'd let you guys know that bluetooth crashes my Tbolt. I've tried it a few times, just turning it on crashes and when I try to view the bluetooth menu. And now I'm stuck in a bootloop. This is my first post and due to the sight rules I can't post on the actual thread, perhaps a mod can move this to it. Otherwise this has been great!
Try flashing the imoseyon kernal. This should fix your Bluetooth issues.
Sent from my ADR6400L using xda app-developers app
You're talking about this one, correct?
http://forum.xda-developers.com/showthread.php?t=1086518
I see that it is a GB kernel and this is an ICS rom. I don't know if that makes a difference. Still pretty new at this, that's why I'm asking.
My apologies. No you cannot use this with ICS. Its early in the morning and thought I read the title to be about Jesters other ROM Jellyblur (GB ROM themed to look like ICS). There are no custom kernals yet for the Thunderbolts ICS until HTC drops the source. I will try to re-create this issue and I will get back with you unless someone gives a solution before me lol. Once again my apologies.
If you are in a bootloop you may have to re-wipe and re-install the ROM. It may have been a bad flash if BT was not working and caused a bootloop.
EDIT: although irrelevent for this ROM, the link you provided is an outdated custom kernal. The Dev has since then updated to 6.2.1
Sent from my ADR6400L using xda app-developers app
Ok cool. I wasn't sure. Good thing I didn't just try it, haha. I ended up wiping it all and reflashing. Haven't tried bluetooth after new install though.
Sent from my ADR6400L using xda app-developers app
So the bluetooth doesnt work with this rom?
As far as I've tried, no. But like baronmxc said, it could be a bad flash. I'm gonna try when I get back from class in a couple hours.
Sent from my ADR6400L using xda app-developers app
Swannyman17 said:
Didn't see anywhere in the thread if the bluetooth was or wasn't working. Just though I'd let you guys know that bluetooth crashes my Tbolt. I've tried it a few times, just turning it on crashes and when I try to view the bluetooth menu. And now I'm stuck in a bootloop. This is my first post and due to the sight rules I can't post on the actual thread, perhaps a mod can move this to it. Otherwise this has been great!
Click to expand...
Click to collapse
Hi,
Well you are in luck I had the exact same problem today and finally found the fix. I was using the . 9 radio was working fine so thought its ok but since bluetooth was my only issue I flashed ( in hboot) the . 19 radio and now no bluetooth problem. Not only turn it on and off able to use it!
Phone has not rebooted once since I did this.
Hope this helps you out,
Bryan
Swannyman, I suggest you to try out what trapperjohn found before you wipe. I have also heard reports of the latest radio fixing these issues also.
Sent from my ADR6400L using xda app-developers app
trapperjohn said:
Hi,
Well you are in luck I had the exact same problem today and finally found the fix. I was using the . 9 radio was working fine so thought its ok but since bluetooth was my only issue I flashed ( in hboot) the . 19 radio and now no bluetooth problem. Not only turn it on and off able to use it!
Phone has not rebooted once since I did this.
Click to expand...
Click to collapse
Is this the radio you're talking about?
http://forum.xda-developers.com/showthread.php?t=1605557
Yes and flash that in hboot
Sent from my ADR6400L using xda app-developers app
Good news! I flashed it and it works great, even sent a file both ways to make sure. Thanks a ton trapperjohn.
Swannyman17 said:
Good news! I flashed it and it works great, even sent a file both ways to make sure. Thanks a ton trapperjohn.
Click to expand...
Click to collapse
Great!
I love it when a plan comes together.
I also notice alot more 4g speed.
That bootloop sucks.
I wonder if this radio came out when the leak was initially released.
Would explain why on gingerbread we didn't see a big change but obviously the minor change in it was for ics.
Thanks,
Bryan
trapperjohn said:
Great!
I love it when a plan comes together.
I also notice alot more 4g speed.
That bootloop sucks.
I wonder if this radio came out when the leak was initially released.
Would explain why on gingerbread we didn't see a big change but obviously the minor change in it was for ics.
Click to expand...
Click to collapse
Yeah, it must have but I'm glad to be out of that mess with the bootloop. Thanks again!
Since the problem got solved...figured I'd jump in with a couple issues that I'm having with this rom.
1* I go into settings and to my apps. When I click an app and it brings up the space used and other info...everything says computing and doesn't show a value. I'm trying to move my apps to the SD and it does nothing since they wont compute. Anybody with this issue...a fix?
2* When I get a SMS, the LED keeps blinking after the message is closed or replied to. It stops after a few minutes, but its annoying. I have GoSMS.
trrubicon06 said:
Since the problem got solved...figured I'd jump in with a couple issues that I'm having with this rom.
1* I go into settings and to my apps. When I click an app and it brings up the space used and other info...everything says computing and doesn't show a value. I'm trying to move my apps to the SD and it does nothing since they wont compute. Anybody with this issue...a fix?
2* When I get a SMS, the LED keeps blinking after the message is closed or replied to. It stops after a few minutes, but its annoying. I have GoSMS.
Click to expand...
Click to collapse
1. Wait and let it total all the apps before entering to move them. It may take a minute if you have a lot of apps.
2. That's a bug with gosms. I never could figure out a fix other than disabling the led notification.
Sent from my ADR6400L using Tapatalk 2
I finally got them moved, but it would take 1-4 minutes a piece to move. And when I try to uninstall an app, it just says uninstalling and hangs on that screen.
trrubicon06 said:
I finally got them moved, but it would take 1-4 minutes a piece to move. And when I try to uninstall an app, it just says uninstalling and hangs on that screen.
Click to expand...
Click to collapse
Hi,
Have you rebooted since installing the rom?
Usually a reboot and waiting 5 after boot corrects this problem.
Thanks,
Bryan
trapperjohn said:
Hi,
Have you rebooted since installing the rom?
Usually a reboot and waiting 5 after boot corrects this problem.
Thanks,
Bryan
Click to expand...
Click to collapse
Yes, a few times. Everything from moving or uninstalling is jacked
trrubicon06 said:
Yes, a few times. Everything from moving or uninstalling is jacked
Click to expand...
Click to collapse
Hi,
What about reseating the sdcard?
Thanks,
Bryan

Categories

Resources