Related
So im on das bamf 2.0 with the mr2 radio flashed, i could load the rom and use my phone.But then i decided to unroot the phone, so i flashed the stock rom which worked before and took me back to being on stock and unrooted.But, now when i flashed it said Main Version is lower, in red letters. I now have no root with s-on as well. My phone wont boot because apparently one of the boot images i flashed didnt want to get unflashed. I cant do anything in the bootloader that wont end up with it rebooting the bootloader. I do not have usb debugging on because of the fact that i it FLASHED the pgio5mg or whatever it is that you call it, flashed = turning off usb debugging. Should i try to get a new one from big red? what if they get on to me and not give me a new phone thanks to it saying security warning?
Is there any way for me to be able to use my phone again, whether its getting rooting again or downloading an official gingerbread rom, if thats even out yet?
PLEASE HELP IM ONLY 2 MONTHS IN MY CONTRACT!
Also, at the top of bootloader it says SECURITY WARNING.
u have the wrong radio for the stock phone. u need the MR1 radio. since u still have the PG05IMG on your card it is stuck in boot loop. u need access to a card reader so u can remove that file. that will take care of the boot loop. then just install the MR1 radio.
also if u go to verizon as is, they will not honor your warranty.
lostnuke said:
u have the wrong radio for the stock phone. u need the MR1 radio. since u still have the PG05IMG on your card it is stuck in boot loop. u need access to a card reader so u can remove that file. that will take care of the boot loop. then just install the MR1 radio.
also if u go to verizon as is, they will not honor your warranty.
Click to expand...
Click to collapse
You just saved me from a life time of nightmares! But that didnt work, pio5mg or not im stuck in a fruit loop!
The first step after flashing pg05img.zip is to remove it from your sdcard.
Sent from my CM7 ThunderBolt using XDA Premium App
That didnt worrrrrrrk, i flashed the default froyo rom which is , like 23 MB, and it loaded it, but nothing happened it just returned me to bootloader menu!
As long as there is no file named pg05img.zip on the root of your sdcard, you can get into recovery from hboot. Are you able to get into recovery?
From what I understand, if you have the wrong radio for your ROM, the only side effect is that you'll have no signal from verizon. It sounds to me like you just need to reflash the ROM to get the phone to boot properly.
XxJakems28xX said:
That didnt worrrrrrrk, i flashed the default froyo rom which is , like 23 MB, and it loaded it, but nothing happened it just returned me to bootloader menu!
Click to expand...
Click to collapse
The default FroYo ROM and NO ROM for that matter is 23MB! Should be 300ishMB for Sense based ROMs.
Mustang302LX said:
The default FroYo ROM and NO ROM for that matter is 23MB! Should be 300ishMB for Sense based ROMs.
Click to expand...
Click to collapse
^^ what I was about to say.
The radios are close to 23MB but not the roms.
BTW, @OP, doesn't sound like you followed the directions when going back to stock as the security warning was one of the disclaimers.
http://forum.xda-developers.com/showthread.php?t=1009423
sorry i meant to say the defualt froyo radio is around 23 mb, i will try to flash this huge rom again, but now i have to wait like three hours cuz every time i try to flash the rom it says BATTERY VOLTAGE IS TOO LOW, and i cannot go to recovery it just takes me back to the hboot crap. I never read that tutortial guess i shouldve, i couldve sworn all you had to do was flash the defualt rom, DANG IT, i think that since i was on gingerbread this piece of shi doesnt want to flash the froyo rom, the fact that im now unrooted it doesnt want me to downgrade, god im never rooting again!
I rooted my phone by using the 3 click method by the unrevoked teem or whatever they are, i downgraded using the downgradepgoi5mg zip file found inside the folder, i dont know if that hepls but i hope it does.
Hello, all!
I've purchased a vibrant for my wife over the weekend (i'm on sensation), and have several questions.
The guy i bought it from did a hard-reset supposedly, and said that it reverted it back to the stock android build. Seemed weird, but the first thing i did was update it via kies mini to the froyo build. It's been working fine, except for the camera started messing up last night. Going into black screens, showing "camera failed" errors. It also takes some time (2-3 secs of black screen) to process a picture after it has been taken. I don't remember it doing that on the stock build. I did update it to the latest firmware.
Should i root the phone and flash a different rom? (which rom would you recommend?) A short google search revealed a lot of people having slow-downs after the froyo update.
Appreciate your help!
just to follow-up. wife's been having problems with the music player app hanging, then the phone shut down while she was installing something.... i'm going to wipe everything first to see if it helps any, but will end up rooting it and flashing something else, most likely.
Before rooting make sure you odin back to stock 2.1. That should het rid of the problems
Sent from my SGH-T959 using xda premium
Definitely do what the above poster suggested. Go to the development section and get the AIO toolbox. It has everything you need to get back to stock and get you rooted. If your looking for a good stable rom I'd recommend bi-winning v3. Good luck.
thank you, guys! ended up using the aio toolbox, like suggested. smooth sailing
i've put ultimate rom on it for now, see how she likes it. i'll check the bi-winning (lol) one also. anything else that you'd recommend for now? thank you!
WORD OF IMPORTANT CAUTION!!!!
DON'T EVER USE KIES AGAIN OR YOU WILL BRICK THE PHONE!!! THIS IS A GIVEN, YOU JUST GOT LUCKY, BUT ITS LIKE PLAYING RUSSIAN ROULETTE!! And when it corrupts the Primary and Secondary Boot loader files you'll be bricked hard for sure!!!
KIES IS NOTORIOUS FOR BRICKING VIBRANTS, IT DID IT TO MY PHONE AND MANY OTHERS HERE!! I WAS NOT AWARE OF THIS UNTIL IT WAS TOO LATE FOR ME!!
Odin or Heimdal are the only programs I would use to do restores other than Baywolfs AIO which is very friendly and has the JFD Rom in it and the Mapping Pit file known as the 512.
You could also use Eugenes No brick Froyo using Odin which has the 2E update file in it, so when you root it and Flash CW recovery, and then re-install packages it will give you the 2E green recovery menu you'll need to successfully flash other ROMS in the future you want.
RussianBear said:
thank you, guys! ended up using the aio toolbox, like suggested. smooth sailing
i've put ultimate rom on it for now, see how she likes it. i'll check the bi-winning (lol) one also. anything else that you'd recommend for now? thank you!
Click to expand...
Click to collapse
Theres a GB ROM out by Hercules that is a Galaxy S II port...its pretty sweet
dseldown said:
WORD OF IMPORTANT CAUTION!!!!
DON'T EVER USE KIES AGAIN OR YOU WILL BRICK THE PHONE!!! THIS IS A GIVEN, YOU JUST GOT LUCKY, BUT ITS LIKE PLAYING RUSSIAN ROULETTE!! And when it corrupts the Primary and Secondary Boot loader files you'll be bricked hard for sure!!!
KIES IS NOTORIOUS FOR BRICKING VIBRANTS, IT DID IT TO MY PHONE AND MANY OTHERS HERE!! I WAS NOT AWARE OF THIS UNTIL IT WAS TOO LATE FOR ME!!
Odin or Heimdal are the only programs I would use to do restores other than Baywolfs AIO which is very friendly and has the JFD Rom in it and the Mapping Pit file known as the 512.
You could also use Eugenes No brick Froyo using Odin which has the 2E update file in it, so when you root it and Flash CW recovery, and then re-install packages it will give you the 2E green recovery menu you'll need to successfully flash other ROMS in the future you want.
Click to expand...
Click to collapse
Wow, didn't know this. Will delete kies asap. btw, this rom that i've flashed has a custom kernel (bionix? + voodoo). i did a backup of the stock rom via recovery. do i need to flash the stock kernel first before rolling back to stock?
hereeny said:
Theres a GB ROM out by Hercules that is a Galaxy S II port...its pretty sweet
Click to expand...
Click to collapse
thank you, will check it out!
Project-V is a Great 2.2 ROM, I made a few themes for it too: Blar and WP7 Style
hi guys
I recently bought a 2nd hand Vibrant for a really good price.
As far as i see the Vibrant is already rooted with 2.2.1 Lidroid, and CWM installed.
The battery usage is amazing with this rom, but I still fancy to install some custom GB roms.
I have some questions:
1. I would like to check if I am already on GB bootloader, please guide me to check?
2. If I am not on GB bootloader, I know I must first install it.
I wonder if Vibrant has some stock GB firmwares like captivate does? The stock camera is a must for my case ><
Am i correct if I follow this method from here
http://forum.xda-developers.com/showthread.php?t=1156832
3.Or actually I can simply flash any custom GB roms directly from where I am (Lidorid 2)
THX
Okay you know if you're not gb bootloaders when you turn on ur phone there's weird rainbow lines
If not then you are
And if you are then yea you can flash any rom
Sent from my GT-I9000 using xda premium
Let me confirm if you suggesting me to flash the GB roms?
If there's rainbows > froyo bootloader
if nothing > GB bootloader
So can i say actually Gb roms doesnt really need GB bootloader
as long as I am fine with the rainbows?
THX
j4371 said:
Let me confirm if you suggesting me to flash the GB roms?
If there's rainbows > froyo bootloader
if nothing > GB bootloader
So can i say actually Gb roms doesnt really need GB bootloader
as long as I am fine with the rainbows?
THX
Click to expand...
Click to collapse
I've run CM7, and CM9 (ICS) on Froyo boot loaders. For me it just makes the kernel screen flash and show again, then goes on to ROM booting. I'm running a Froyo boot loader right now.
Is lidroid a t959 rom or a t959v?
You need to have a t959 to be in the vibrant 3g section, otherwise you'll probably want the galaxy s 4g section.
Sent from my Sensation using Tapatalk 2
there is a Lidroid version for T959 - I have a Odin flash with it. I use it instead of JFD.
Want to know if you have the GB boot loaders? Easy -
Hold the Volume up button and the power button at the same time. If it goes to download mode....you got the GB bootloaders.
T959 Vibrant does not have Samsung 2.3 support. Samsung forgot about us after Froyo. There Froyo OTA upgrade bricked so many phones that they wont chance it again.
For 2.3 Gingerbread you will have to download a I9000 port found in our Development section. That said the ICS packages are very nice for Vibs too.
need help guys
A few hours ago, I was at work and bored.
I started to flash some GB roms without coming back to check this post.
The rom i used was phiremod-fusion-2.1.1.
As usual I nandroid my lidroid before doing anything.
Then I 3 wipes and flash the phiremod rom.
first time the flash was really quick and also rebooted itself.
But only this time I realise I have a newer CWM 5.xx version instead of my 2.xx version (Lidroid)
Ok, i wasn't panic, because i read some where before. It's prefectly fine for a cm7 if the first time it bootloop.
Then I pull battery, and boot into recovery again, to flash the 2nd time.
this time BAAM, prefect. I found myself with a 2.3.x cm7 mod rom.
but as soon as I found the camera apk is actually the MIUI one. I decided to nandroid back to Lidorid.
things turns ugly at this point, when i back to CWM i restored.
But only found some errors CWM said , but I remember CWM did say something like erasing boot.img before restoring.
After the resotre failed, I accidentally reboot my phone.
And now my vibrant only stuck at the typical black boot screen "Vibrant in the middle with samsung at the bottom.
I tried to boot back to recovery, but no luck.
right now I am telling myself i probably need to restore to stock.
Can my fellow xda members guide me the proper way to
1. boot CWM
2. download mode
Given the fact that I am not too sure about which bootloader I am on.
THX people!!
Yup, you'll need to go back to stock. There are plenty of write-ups on how to do it.
Also, NEVER restore a 2.2 backup after you install 2.3 or higher. The file systems and partitions are different. Odin back to stock, install lidroid again, and then try to restore your backup.
j4371 said:
need help guys
A few hours ago, I was at work and bored.
I started to flash some GB roms without coming back to check this post.
The rom i used was phiremod-fusion-2.1.1.
As usual I nandroid my lidroid before doing anything.
Then I 3 wipes and flash the phiremod rom.
first time the flash was really quick and also rebooted itself.
But only this time I realise I have a newer CWM 5.xx version instead of my 2.xx version (Lidroid)
Ok, i wasn't panic, because i read some where before. It's prefectly fine for a cm7 if the first time it bootloop.
Then I pull battery, and boot into recovery again, to flash the 2nd time.
this time BAAM, prefect. I found myself with a 2.3.x cm7 mod rom.
but as soon as I found the camera apk is actually the MIUI one. I decided to nandroid back to Lidorid.
things turns ugly at this point, when i back to CWM i restored.
But only found some errors CWM said , but I remember CWM did say something like erasing boot.img before restoring.
After the resotre failed, I accidentally reboot my phone.
And now my vibrant only stuck at the typical black boot screen "Vibrant in the middle with samsung at the bottom.
I tried to boot back to recovery, but no luck.
right now I am telling myself i probably need to restore to stock.
Can my fellow xda members guide me the proper way to
1. boot CWM
2. download mode
Given the fact that I am not too sure about which bootloader I am on.
THX people!!
Click to expand...
Click to collapse
Get into download mode by while it's off, holding VOL-UP + Vol-DOWN and plugging in USB.
y vibrant revived!!
Thx everyone
After this, I am thinking to ask my colleagueto make one JIG for me.
I'd like to confirm it's same as SGS, i.e. 3 X 10kohm in series
hi,
I am sorry if this is a dumb question. But i have failed several attempts while shifting to ICS (RC 5 by team-nyx). Every time when i install ROM & kernel via CWM and boot the device (vibrant t959) it freezes on the screen with VIBRANT and SAMSUNG displaying WHITE on BLACK back ground.
i have gone back to JFD and tried several times BUT same result.
I was on froyo 2.2 (build UVKB5) updated via kies and did it but no luck. I followed wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and did starting from No. 03 --
downloaded Cmenard's Kernel with the ClockworkMod Recovery 2.5
Heimdall Suite 1.3.2 for windows
AND upto No. 9 under Windows ONLY: section
the CWM installs as it says (A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically. )
after that i cleared factory, cache and dalvik cache.
then I select install Zip from SD card and chose the ROM (which is from team-nyx.com/index.php/releases).
after 3% it says rebooting and vibrant shuts down and reboots.. when after I clicked the combo (vol+vol-power) to enter the CWM its not there.. so I reinstall using [heimdall flash --kernel zImage] command in PC's cmd. then after i redid the same to select from SD and then ROM installed ok.
then I selected the kerenel which was taken by same source and installation went normal..
after I select reboot from CWM it reboots and hangs on vibrant screen.
I cannot figure OUT WHAT IM doing WRONG..
Please HELP ME..!!!
thank you for your time
I am moving to 2.2 via kies after going back to stock JFD. then i will root my vibrant. after that i will install ROM manager from market. THEN i will try to FLASH to ICS RC 5 + kernel from nyx TEAM.
I dont know what is wrong.. please HELP
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
iwillkillyou said:
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi,
thank you for the reply. No i havent tried a different ROM. yes I checked repartiton when ODin Y this is happening.. I have Flashed this ROM once.. but then when someone calls me they cudnt hear me clearly.. when i initiate the call its ok.. so I moved back to JFD..:/
kaiser_bun said:
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
Click to expand...
Click to collapse
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
haarsh said:
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
Click to expand...
Click to collapse
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Woodrube said:
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Click to expand...
Click to collapse
Thank you for the links.. I downloaded and place CWR inside SD. Without kies can we install official releases via Odin.. is there any way.. im sorry if that is a stupid question
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Woodrube said:
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Click to expand...
Click to collapse
thank you. btw can we Flash to 2.2 via CWM .. directly selecting the ROM from SD .. without Odin
If you can find it, you should be able to. Just put on your card and flash away, taking care to wipe accordingly.
A note on flow though:
2.1, 2.2 -can go into and out of any 2.2 there is laterally.
2.3-4.0 -will need to Odin to stock before going back to a 2.2 ROM. Can move laterally from 4.0 to 4.0 though.
(i.e DO NOT try to restore a 2.2 nandroid or flash a 2.2 ROM when you are on an ICS variant. the /system is completely changed and reformatted. You need to Odin to get it back.)
Moped Ryder uploaded a semi tweaked version of the stock 2.2 build. It's a zip that you can just flash using CWR:
http://forum.xda-developers.com/showthread.php?t=1674519
It comes rooted with busybox and some other goodies, but it's the stock kernel and whatnot. I'd highly recommend Fishman's Bionix-V Mod or Moped Ryder's Slim_Ryder ROMs if you're going to be on Froyo though. They're both great, but I went with Fishman's latest Bionix Mod since I couldn't get bluetooth to work on Moped Ryder's ROM. Which is really unfortunate because I loved Moped Ryder's otherwise.
And you don't have to Odin back to stock if you're just bouncing around Froyo or Eclair builds; only if you're coming from Gingerbread or ICS (2.3 or 4.0).
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Is your Samsung Vibrant (T959) Rooted.?
iwillkillyou said:
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi.. I tried again with flashing semaphore kernel through Odin installed CWM version higher than 2.5 to install ICS RC5 by nyx --sorry i need that soo badly so didnt checked anything else ..
@that time I was on vibrant 2.2 UVKB5 (stock)
NOT rooted
I didnt had so called
bootloaders
Click to expand...
Click to collapse
(i dunno what it means though--have to search )
BUT it didnt worked for me instead freezes at Vibrant start-up screen. So i Couldnt switch back to CWM. I Odin back to JFD with repartition clicked and my vibrant was locked (network lock). Finally, I got it cleared by application named Galaxy_S Unlock by Helroz from the market.
Now I am at the very beginning again. I am now on 2.1 JFD. I dont know WHY this happening to me .. :crying:
gonna try again with GB bootloaders.. BUT Im sick of failing and going back to 2.1 (my friends who are having captivate had no problem)
Speedy5150 said:
Is your Samsung Vibrant (T959) Rooted.?
Click to expand...
Click to collapse
At the time i was trying it was NOT rooted.. But now i have it rooted because i needed to unlock the network . which happened me for the very first time after flashing back to JFD using Odin..
Thank you guys for the links and thoughts on 2.2 ROMs.. I am not that expert . Thats why i was updating to 2.2 via KIES -- which is not a good idea as it seems with the ability 2 brick the device. I am going to get Bionix-V FishmanMod V4 FULL and install as http://forum.xda-developers.com/showthread.php?t=1441976 says..
It says Boot into clockwork recovery and i think i found something to do that in this thread http://forum.xda-developers.com/showthread.php?t=734164
I have to get ROM manager from market and go through it..
BUT Im damn upset with the RC5 ICS update by nyx being unable to installed into my device.. I will try with GB bootloaders flashed ..
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Woodrube said:
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Click to expand...
Click to collapse
thanks alot for the info brother.. some guys told me STUPID.. but YOU guys are awesome.. I am a newbie to this flashing and stuff.. but learned a lot from XDA . Thanks again for the reply. now I have stock 2.1 with ROOT . (rooted cuz i had to unlock the vibrant). I will flash to Fish's 2.2 ROM soon. BTW may i ask you after moving to Fish's ROM and later if i need to move to ICS still can I do it without messing with Bootloaders..
Thank you
That is what we are here for in the Q&A/General sections.
Regaring your question about Gingerbread bootloaders being needed:::Yes and No.
Gingerbread bootloaders were required in the infancy of ICS ROMs bc they prevented what is called "Rainbows" in your clockwork where you couldn't see anything. The options were there but you just couldn't see them. Then as ICS evolved, the need for GB bl's lessened and now you don't need them at all.
But...There's always a but...Gingerbread bl's are recommended by most of the devs for ICS builds because they seem to work better with the custom recoveries that come with some of the kernels. There is more to it but in short, GB bl's are not required but recommended.
If you go to my ICS install guide, in the middle pages and more again at the end, Yosup (highly respected user) and I have a detailed conversation about bootloaders and their installation. Once he got over the fear and did it, he was hooked and flashing ICS ROMs weekly if not more. It is a very informative section of that thread.
this is what i get for oding late at night but i managed to do something very very stupid I odined my phone with a one click package for my captivate
I've been able to get the phone back in mostly working order now though.. but i feel in my gut something still may not be right.
here is where i got the package
http://forum.xda-developers.com/showthread.php?t=1300843
This below is what version i accidently installed.
I897UCKI2 Android 2.3.5 Gingerbread
With Bootloaders - Link to thread - Second Post [With CWM Injected Kernel from Boog]
so after i made this mistake.. (noticed my phone had a at&t bootscreen an wouldn't load) I went forth an flashed stock firmware avail for aiotools for the vibrant an then installed the stock froyo bootloader
I'm hoping everything is right in its place well except once i get cm9 flashed it boots up an shows a EU error so i freak yank the battery an odin this phone back into the stoneage an well... surprisingly.... my internal memory is 100% there O.O
anyways current issue is not being able to get cm7 to install though i'm probably missing something due to being tired anyways..
help sugestions banter calling me a noob I just want to make sure i did possibly everything to fix this mistake.
pintek said:
I'm hoping everything is right in its place well except once i get cm9 flashed it boots up an shows a EU error so i freak yank the battery an odin this phone back into the stoneage an well... surprisingly.... my internal memory is 100% there O.O
Click to expand...
Click to collapse
You,my friend, dodged a bullet here.
pintek said:
anyways current issue is not being able to get cm7 to install though i'm probably missing something due to being tired anyways..
Click to expand...
Click to collapse
Well, when you say you are not able to get CM7 to install, what exactly is it doing?
Are you getting thrown into a bootloop (caused by CWR mismatch and pretty common)? If so, pull battery and boot into recovery and re-flash CM7 over itself again. No wipe. Then reboot.
You may have to flash a different kernel, like glitch or something like that. But try the above first. Should work for you. Does it still say ATT when you boot up?
Lucky for you, everything is good, but if you want to flash a GB or higher ROM, i would suggest you flash the bootloaders in this thread: http://forum.xda-developers.com/showthread.php?t=1117990
After that just flash CM9, and you *should* be good, if not, try flashing it again with wiping data, cache, and dalvik cache. I guarantee that will work.
I ended up having to format both SD cards an retrying install custom rom via aio tool an with luck was able to get cm7 installed then cm10 an i dno't have the ime error everyone else seams to have . I did before this flash the gb bootloader over this cause it was the only thing that managed to remove the at&t splash screen before the kernal.
Lesson I learned....
remember that the vibrant you use aio tool not a premade pack >.<
an ya i do own both phones so this does complicate things now an then <,<
I also have both devices. Set up two different folders on your pc, one marked i897 and the other t959. I also add i897 or t959 to any files that could possibly get mixed up in Odin.
Its peanut butter jelly(bean) time...