Related
getting to be far too familiar a scenario lately....
lately EVERY time i reboot my phone (running ics build 2, 3 and 4, stock kernel) it gets stuck on samsung logo.. somehow my phone will only boot into the frigging cm7 recovery which as im sure youre all aware is rather useless to fix any problems im having in ics and leaves me unable to flash, backup, or restore anything. it's quite frustrating and i have no idea how to fix it but by going back to bml, re-partitioning, then odin ei20 modem, cm7 fixed recovery, then flash back to ics but doin this every reboot it getting very tedious..
ive read about recovery loops, but the fix doesnt work for me as i cant mount the ICS /system partition in cm7 recovery...and ive been all over trying a zillion things to get it to work and havent pulled dmesg or logcat but if someone thinks it would be useful ..i wish i knew why EVERYTHING is great, then BANG, reboot and it's FML city.
i should add this phone is a replacement via insurance and that the entire time ive had it, i've been having this problem to varying degrees of intensity,.sometimes if i rebooted enough the ics boot animation would finally come up and freeze part way through, and in the first week with this phone is seemed fine. the first few times i rebooted and battery pulled until it started but this is the fourth time in two weeks ive found myself going back to repartition from odin and then back to ics.. the phone is only mine for a month,.
if nobody has any ideas ill be getting it replaced tomorrow in store. i have the no fee insurance replacement plan, but i would prefer not to have to use another as it's not under warranty and this would be my second replacement and this mes has to last me until the gnex hits uscc in hopefully april if it ever does because i'd rather switch to vzw than take any of usccs other offerings currently.. if they dont get the gnex it'll be time for me to move on...
anyway please advise.. thanks
http://exzacklyright.blogspot.com/2012/01/how-to-flash-ics-on-verizon-samsung.html
exzacklyright said:
http://exzacklyright.blogspot.com/2012/01/how-to-flash-ics-on-verizon-samsung.html
Click to expand...
Click to collapse
Thanks for the response. Sounds like a good guide for newbs but in my case information is redundant. I have no problems with the install, unless recovery switches to cm7 recovery during reboot and cannot manage to boot/flash/nandroid until I Odin stock ei20 with repartition and wipe out every bit of data I had. The posts about howto fix CWM bootloop for cm9 do not seem to work for me, as the post says.. Please reread the OP, ya got me excited thinking there was a solution ;-/ thanks anyway, maybe it will help another user.
wizayne said:
Thanks for the response. Sounds like a good guide for newbs but in my case information is redundant. I have no problems with the install, unless recovery switches to cm7 recovery during reboot and cannot manage to boot/flash/nandroid until I Odin stock ei20 with repartitions and wipe out every bit of data in had. The posts about howto fix cwm bootloop for cm9 do not seem to work for me, as the post says.. Please reread the OPEN, ya got me excited thinking there was a solution ;-/ thanks anyway, maybe it will help another user.
Click to expand...
Click to collapse
have you tried flashing glitch kernel to the phone. imo it sounds like a kernel issue and not so much a phone issue.
mkuehl06 said:
have you tried flashing glitch kernel to the phone. imo it sounds like a kernel issue and not so much a phone issue.
Click to expand...
Click to collapse
The problem started after using ics from alphalulz v1 on around build 3 team hacksung IMMEDIATELY AFTER flashing glitch kernel v14 build 4...I have since kept away from glitch on ics, and the problem remains.
Lately it hasn't been as bad though and it seems by hitting random buttons during boot that it will eventually start but reading tells me glitch v14 build 5 is still recovery bootloop ridden and I haven't seen a word about it in the OP for ANY ics components be it team hacksung roms or glitch kernel, and an issue like this which from reading is seemingly widespread *should* be mentioned.
Any suggestions?
In your op you said e120, what phone are you using. E120 isn't a fascinate build.
Sent from my SCH-I500 using XDA App
Ei20 is the latest and greatest version of gb/radio from uscc for the mesmerize, not that it'll change the outcome afaik to go to anything else... unfortunately ;-/
But it is a full flash package if ya open the tar up complete with movinand, sbl, radio, rfs, etc.. I think it is a 10 or 11 file package and I've used it a hundred times with making the switch from mtd to bml
wizayne said:
Ei20 is the latest and greatest version of gb/radio from uscc for the mesmerize, not that it'll change the outcome afaik to go to anything else... unfortunately ;-/
But it is a full flash package if ya open the tar up complete with movinand, sbl, radio, rfs, etc.. I think it is a 10 or 11 file package and I've used it a hundred times with making the switch from mtd to bml
Click to expand...
Click to collapse
That makes more sense to me now I know what phone your on. Try rootzwiki they have a mesmorize section, they can help ya out more than I can. I have fassy so idk much about mes
Sent from my SCH-I500 using XDA App
I recently installed the nightly build of ICS on my samsung vibrant. Today the phone had a error that said encryption cannot be completed phone must be erased. I let it do a factory reset . Then I got stuck in a endless boot cycle showing the vibrant logo and then the cynogen guy for a few seconds then reboot. I could still access the recovery menu but it refused to flash any roms I threw at it. I downloaded and ran odin 1 click recovery and it changed my tmobile phone to a att phone. And it lost the recovery mode. It just shows att screen first then samsung vibrant second and just reboots. I can still get into download mode and flash roms using odin 3 but no matter what rom I select or if I choose repartion or not the flash will go through successfully but then the phone reboots into same problem as before. I suspect the recovery files are gone since no button combination anymore gets me into recovery. Is there anything else I can do?
Man I am having the exact same problem. I really hope someone can figure something out soon. Did yours randomly get that error? Or did you actually try to encrypt your phone?
Sounds like you used the wrong Odin 1 Click. If it installed Captivate bootloaders, that would cause a problem.
This is your best shot I think
http://forum.xda-developers.com/showthread.php?p=24418319
Sent from my A500 using Tapatalk 2
It just happened
It happened on its own. Was working fine all day walked in my house as as soon as it hit wifi it started going crazy. I had the data plan turned off months ago. Maybe theres something to it connecting up to the net. I have found out if you install your sim you get a reduced menu of recovery options but without sim it just constantly reboots. it only gives option of reboot, reinstall packages,delete all user data, delete cache data. If you try reinstalling the packages theres nothing there. Deleting caches made no differance. ADB does work and responds while in this lesser form of recovery is there a easy way to use adb to force a full system flash?
Thanks
That link was perfect had a link to eugenes no brick froyo rom which fixed my problem. Dloaded that used its pit and tar files and repartioned and im back to stock. Going back to team whiskeys mod. If all ICS roms has bugs like that is unusable.
bfranklin1986 said:
This is your best shot I think
http://forum.xda-developers.com/showthread.php?p=24418319
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
Do you have access to BOTH your internal and external SD cards? The Encryption Bug is totally and completely random and does not discriminate. There is currently no known reason or solution. Several of us across a few different devices have been working on this for months.
Consider yourself luck if you have access to both SDs as you are the 2nd person to get in and out today. Many, many others have not been as fortunate.
If you could please pull up this thread and put as much information in there as possible, it would be greatly appreciated. Are you unlocked, what happened right before, what bootloaders are you on, what ROM were you trying to flash, what ROM did you end up getting booted,....those types of things. As much detail as you can muster together, after you catch your breath and relax a minute.
Guys DO NOT run ICS unless you have read up on the Encryption Unsuccessful bug and except the possible consequences! Every ICS T959 rom should have a warning IMO.
There is no known fix > just a work around. Odin / Heimdall / Jtag = useless
Update
I think I might have pulled the trigger to quick. While the link above did give me Eugenes rom which at least got me out of the boot cycle both internal and external sd shows 0 and I am unable to load anything on either card. I have tried differant microsd cards all of them show the same thing. So eugenes rom got me working kind of but cant store anything at all. That sucks loved my vibrant and its almost out of contract and planned on using on prepay.
Agreed 100 %
Had I of known would of stuck around on my team whiskey rom which never gave me any problems. Does this ICS bug affect amazon kindles? Ive put cynogen9 on 2 of them and am wondering if I shouldnt take it off before they turn into paper weights.
Moped_Ryder said:
Guys DO NOT run ICS unless you have read up on the Encryption Unsuccessful bug and except the possible consequences! Every ICS T959 rom should have a warning IMO.
There is no known fix > just a work around. Odin / Heimdall / Jtag = useless
Click to expand...
Click to collapse
chickenmon said:
Had I of known would of stuck around on my team whiskey rom which never gave me any problems. Does this ICS bug affect amazon kindles? Ive put cynogen9 on 2 of them and am wondering if I shouldnt take it off before they turn into paper weights.
Click to expand...
Click to collapse
I got tagged on a Nook Color with it. BUT, since the Nook Color has a feature that no others I think do (you can boot a ROM straight from an SD card and not mess with the oringinal OS at all), I was able to just pull my Microsd out and reformat it and then put CM7 on it for my wife.
So far from what I have seen and been working on:
Vibrant, Captivate, My wife's Nook Color, A few Transformers, SGSII,...
Anything I can do?
Anything I can do to get my partions right again? I can flash the twm 5.2.2 but none of the roms i throw at it including ics passion stays in a boot cycle. Only rom that works is eugenes froyo that does not brick and it doesnt allow internal or external mem to be seen.
chickenmon said:
... Only rom that works is eugenes froyo that does not brick and it doesnt allow internal or external mem to be seen.
Click to expand...
Click to collapse
You may want to bring up this issue directly in Merio90's thread. I believe Alex9090 went thru possibly similar issues and may be able to help you in that thread (unless she happens to pop in here).
I'm assuming you were trying to mount sdcard and emmc within recovery first (storage and mounts)? If you do have access to recovery again and can mount the external sdcard, maybe try repartitioning the card within recovery (using the parameters in Merio90's instructions)? Then transfer your rom zip and re-flash.
People have actually flashed Eugene's Froyo post-EU ... but without an ext sdcard. Quite an oddity. It's the only one (AFAIK) that'll fully boot up (even after losing int sdcard access due to EU) yet without an external sdcard in place.
Your assumptions are correct. I cannot mount emmc. I cannot flash any rom via 2.5 or 5.2 recovery only through odin and only eugenes rom still allows phone to boot but no mounting of internal or external sds. Ive spent about 3 days on this. There must be some hardcore adb commands to force a true factory reset partioning and all. Very annoying. Thanks for the help if I find any ways to fix it I will repost it here.
Might be bricked?
Ok, i will admit up front that I probably did something stupid and now am sending out a cry for help. Until yesterday I had ICS 4.0.3 successfully installed. I believe it was Euphoria flavor. But, I constantly had shortage of memory problems with the new force close language on apps running in bg - was laggy. Here is where it all went wrong - Decided to dl and install CM9 nightly to fix my laggy install. Recovery went fine, but rom failed, rebooted and sent error to cm. Tried new tactic - dl and installed Slim ICS - wrong, got stuck in boot loop - but could still get into download mode. Ran Odin to restore to stock. Ran fine but Failed - no explanation, just failed. Since it would not respond, finally turned it off - OFF has now become permanent! Power button does nothing. Charging does not light up screen. No download or recovery mode! Really fearful that this IS bad. Help, help, help!!
Open to suggestion. . .
JIM in FLA
Not related at all to my original problem.
tenantrep said:
Ok, i will admit up front that I probably did something stupid and now am sending out a cry for help. Until yesterday I had ICS 4.0.3 successfully installed. I believe it was Euphoria flavor. But, I constantly had shortage of memory problems with the new force close language on apps running in bg - was laggy. Here is where it all went wrong - Decided to dl and install CM9 nightly to fix my laggy install. Recovery went fine, but rom failed, rebooted and sent error to cm. Tried new tactic - dl and installed Slim ICS - wrong, got stuck in boot loop - but could still get into download mode. Ran Odin to restore to stock. Ran fine but Failed - no explanation, just failed. Since it would not respond, finally turned it off - OFF has now become permanent! Power button does nothing. Charging does not light up screen. No download or recovery mode! Really fearful that this IS bad. Help, help, help!!
Open to suggestion. . .
JIM in FLA
Click to expand...
Click to collapse
First of all, not to sound like a ****; but it's rude to hijack someone elses thread. You should've created your own thread for this.
Second; you might have fried your bootloader which in turn, yeah, that's bad and you might have bricked your phone.
Did you try to boot into recovery via the battery pull method. If not, try that and see how it works. I would link you to the instructions but I'm too lazy and tired right now to search for it and again, this is someone else's thread. Just do a search for it and you should find it.
If you need more help or guidance, create your own thread and start there.
Noticed your running Ice Cream Zenwich rc1.3. How do you like it. Ive installed slim 3 times today and twice I have gotten the encryption error within a hour. Needless to say not impressed major pain in the ass to have to do a million and half tricks with awm, adb, popping sd cards in and out etc.
Update
Also the current build of ics slim does not allow the imei information to be retrieved from sim for tmobile requiring a reflash of the modem. You have to download and install a new modem. I used csm5. The guide on the link in this post dow work but its a real pain and requires lots of trial and error. Wondering if google intentionally bricking these things knowing we all got gadget lust for the sIII now.
chickenmon said:
Noticed your running Ice Cream Zenwich rc1.3. How do you like it ...
Click to expand...
Click to collapse
ICZen_rc1.8.3 (AOKP #39, ICS 4.0.4) + subZero #144 (New Test Kernel just released in mr_pyscho's RootzWiki kernel thread) is Linaro infused ... and I've got to say the combo is THE fastest rom experience I've ever had on my Vibe. Whatever MP did in his new test kernel just blows the doors off the previous performance limits.
Btw .. you keep encountering EU again. Really odd unless possibly your external card wasn't partitioned correctly. Not a knock directly on you, but it is a common occurrence lately. FYI, I repartitioned mine directly from recovery.
Also ... Br1cK'd (ICZen) and mr_psycho (subZero) are aware of the EU situation and try to include safeguards in their builds. However, until we know the exact root cause of EU, we're all just shooting in the dark. Imo, it's at least comforting to use a rom & kernel where the dev's are at least mindful of EU.
Hi am obviously new to these forums but not new to Android/Samsung development so I had custom roms installed on my I777 so I needed to revert back to stock in which I flashed a leak which apparently changed the pit so I was able to download all the stock files for Odin3 for my device in the Download Repository. My question is there any reason why my device just doesn't act as accurately as I though I remembered it being when it was stock. Is there any ultimately right process for flashing because most instructions including my own are all different, some say wipe cache and data first and battery pull then download mode Creepys says its not neccessary until after the flash as does ZedoMax. I've followed all of them and haven't understood why there is no ultimately right process if there is one at all using odin3 and one-click. And if this is the case what could possibly be going on with the force closes and hangups I'm getting? If someone is willing to take the time to help me with all these questions I'd greatly appreciate it.
Dunno if it'll help, but it won't hurt..
Boot into recovery and"fix permissions". *Should* help with the FC's - oh, and delete everything from your memory that you read on galaxys2root (zedomax). Whatever you've read from creepy, COMMIT to memory. The guy is ace!
Clay
Team Pirate
Sent from my PINK SGH-I777
clay101eve said:
Dunno if it'll help, but it won't hurt..
Boot into recovery and"fix permissions". *Should* help with the FC's - oh, and delete everything from your memory that you read on galaxys2root (zedomax). Whatever you've read from creepy, COMMIT to memory. The guy is ace!
Clay
Team Pirate
Sent from my PINK SGH-I777
Click to expand...
Click to collapse
I don't see the option for fix permissions first of all is that a cwm option? Also I know creepy is one of the best but what's wrong with gs2root? And I appreciate the help but which process is the ultimate right way? Do you flash pit,PDA,modem all together or is that incorrect?
GalaxyHackster85 said:
I don't see the option for fix permissions first of all is that a cwm option? Also I know creepy is one of the best but what's wrong with gs2root? And I appreciate the help but which process is the ultimate right way? Do you flash pit,PDA,modem all together or is that incorrect?
Click to expand...
Click to collapse
I don't remember for sure, but I don't think fix permissions in available in stock 3e recovery. It should be available in just about any custom recovery.
GalaxyS2Root, and it's owner who goes by the screen name zedomax, is a strictly commercial endeavour, designed to make money but not necessarily designed to help people. I think zedomax is a developer, but I'm not sure how good he is. Many of the offerings on that web site, and presumably on his dozens of other web sites for other phones, cause problems for folks, bricking phones, and other things. Further, he takes the work of developers here and posts their work on his sites without giving any attribution or remuneration. He's spread way too thin keeping up with all his various sites, and/or he just doesn't seem to care if his offerings cause problems. We've had so many people come to this forum with various problems due to GalaxyS2Root that when the name is mentioned, everyone is on it right away.
I would only use the pit to repartition on the I777 when everything else fails. It can be a help, but you should be sure that you are going to have a successful flash before you use it, since it repartitions the memory space of the phone.
Most firmware for the I777 has everything in one .tar file, which you put into the PDA slot. If you are flashing just a param.lfs or just a sbl.bin, then that goes into the PDA slot. You can also flash a modem at the same time as the rest of the firmware, using the Modem slot, but most firmware packages have the modem in them too.
So essentially the oneclicks are absolutely the only thing I need in order to ensure a 100% successful restocking? And if so am I always suppose to factory wipe/cache then battery pull (3e recovery doesn't have a power off option)? The reason why I ask so many questions is A. A lot of peoples data isn't accurate as you've stated and its better for me to have as much data as possible when potentially getting into these things. And B. I've been flashing my S2 like a madman with OCD because as soon as I'd get a force close or any sort of hiccup happened I assumed it was because I flashed it wrong when in fact I was just following some of the directions that I've aqquired from here or GS2Root and so far everything has flashed with the same results but as its been forever since my phone was purchased so I can recall if these are just the normal hiccups that come with the inconsistancy of android. So to me I'm just trying to.make sure that I'm doing things absolutely correct.
There is lots of material here to read. You can learn a lot about your phone by spending some time reading.
creepyncrawly said:
There is lots of material here to read. You can learn a lot about your phone by spending some time reading.
Click to expand...
Click to collapse
And you are absolutely correct and I have your guide bookmarked but with so many people having different takes on how to return to stock can you point me in a direction that's the completely right way of flashing your pit and attempt software. Or is your guide with one click the most surefire way to do it? Like I said before I'm a bit OCD when it comes to my phone so whenever I get a little hiccup I can't tell if those are just normal for I777 software or is it something I've done wrong which I probably haven't but it still worries me.
If you havn't done something absolutely ignorant, i.e. flash firmware for a different phone, then you should just use my guide with the linked one-click downloader. That package does not contain bootloaders or param.lfs. Those (the bootloaders and param) will always be good, and not needing replaced, if you only flash firmware from these forums and never flash leaked firmware (which usually contains bootloaders.) There should never, ever be a reason to use a pit file. As I said before, the phone has to be pretty seriously screwed before you need to repartition, and then it should be the absolutely last thing you try.
And inform yourself before you do any actual flashing. You should know exactly what you are doing to your phone, and also know what the remedy is before you do it. That way, you can avoid doing something stupid. If you really want to learn about your phone, read at least a little bit from the forums here every day for a few months, get involved in the discussions, and before you know it, you'll be one of the helpers.
Thank you so much for all of your prompt replies, I have been using the data from this site for quite some years now but never ran into any issues which required me to create an account (although I have wanted to), but for s**ts and giggles let me just say that due to the few hiccups I encountered and not knowing what would have caused them I have already flashed the pit and repartitioned as well as flashed the oneclick w/ bootloaders and param. Now asside from the few force closes that I ran into and the one time I bricked it and brought it back to fully functional is there any harm to the flashing of those tools that I've already done so far. Is there any negative side effects of what I've done that I may not be seeing or is it a case of well "there in the repository so theyre safe as long as I've flashed them correctly". And if so are these few force closes just everyday hiccups that every version of Android experiences and that I'm just overthinking it and it's just been a case of my ocd kicking me in the ass?
The danger in using those files is in the flashing. If a flash is inadvertantly interrupted or goes bad, then it can hard brick the phone. Once the flash is complete and successful, then you're fine. There are no side effects.
Force closes, and other anomalies can be caused by conflicting data is the system and data partitions. They can also be the result of bugs in the firmware distribution or in any of the various applications. To eliminate the first cause, following all the best proceedures when flashing such as wiping first, etc eliminates the possibility that the fc's are caused by improper proceedure.
With proper installation proceedure, and with a stable firmware, and with robust applications, you should experience little to no fc's.
creepyncrawly said:
The danger in using those files is in the flashing. If a flash is inadvertantly interrupted or goes bad, then it can hard brick the phone. Once the flash is complete and successful, then you're fine. There are no side effects.
Force closes, and other anomalies can be caused by conflicting data is the system and data partitions. They can also be the result of bugs in the firmware distribution or in any of the various applications. To eliminate the first cause, following all the best proceedures when flashing such as wiping first, etc eliminates the possibility that the fc's are caused by improper proceedure.
With proper installation proceedure, and with a stable firmware, and with robust applications, you should experience little to no fc's.
Click to expand...
Click to collapse
i did zedo then s2 unlock then aokp then siyah kernal change forgot to do triangle away then tryed a ota update messed up rom cwm messed up then i just did zedo again to get cwm again then i did aokp again then ran triangle away then i return to stock backup after root then odin flash for stock non root then i took stock and did ota update to 2.3.6 i dont think we will ever get 2.3.7 because google wallet is on 2.3.7 and we cant have it correctly .....on reboot it hangs so i did 3e wipe and cache delete reboot all has been good since batt has been outragously long on uckk7 but after ota update it shows as uckk6 i used a non rooted file maybe u used a rooted return to stock file ?anyway file i used was I777UCKH7-CL503881-No-BL as stated just used pda slot .....idk after all the custom roms theres a distinct feeling in knowing your stock again but have the ability to go and do it all over again i honestly just miss the torch feature and the easy brightness slider on the pulldown
im getting h+ but it doesnt seem like true h+ speed and i also lose h+ while holding the phone im waiting for this to change with tmobile and thier 1900mhz i hope it does or ill be looking into whats going on with the modem maybe
colorsharpkid said:
i did zedo then s2 unlock then aokp then siyah kernal change forgot to do triangle away then tryed a ota update messed up rom cwm messed up then i just did zedo again to get cwm again then i did aokp again then ran triangle away then i return to stock backup after root then odin flash for stock non root then i took stock and did ota update to 2.3.6 i dont think we will ever get 2.3.7 because google wallet is on 2.3.7 and we cant have it correctly .....on reboot it hangs so i did 3e wipe and cache delete reboot all has been good since batt has been outragously long on uckk7 but after ota update it shows as uckk6 i used a non rooted file maybe u used a rooted return to stock file ?anyway file i used was I777UCKH7-CL503881-No-BL as stated just used pda slot .....idk after all the custom roms theres a distinct feeling in knowing your stock again but have the ability to go and do it all over again i honestly just miss the torch feature and the easy brightness slider on the pulldown
im getting h+ but it doesnt seem like true h+ speed and i also lose h+ while holding the phone im waiting for this to change with tmobile and thier 1900mhz i hope it does or ill be looking into whats going on with the modem maybe
Click to expand...
Click to collapse
Honestly, I have no idea what you just said, or what you're asking.
qwertyaas said:
Honestly, I have no idea what you just said, or what you're asking.
Click to expand...
Click to collapse
Me either, sometimes punctuation goes a long way
Sent from team Pirate! Using Tapatalk 2
colorsharpkid said:
i flashed zedo then used s2 unlock. then i flashed aokp and siyah kernel. I forgot to do triangle away (because I used zedo) and then tried an ota update. This messed up my rom because I couldn't access cwm. then i flashed zedo again to get cwm back. After that i flashed aokp again and ran triangle away.
I then did a return to stock backup after root and an odin flash for stock non root. While on stock i did an ota update to 2.3.6. (some nonsense about 2.3.7 and Google wallet)
.....on reboot it hangs so i did 3e recovery wipe and wiped cache. Reboot has been good since. My batt has been outragously long on uckk7!! But, after an ota update it shows as uckk6 i used a non rooted file, maybe I should have used a rooted return to stock file?
Anyway, the file i used was I777UCKH7-CL503881-No-BL as stated and i just used pda slot .....idk, after all the custom roms theres a distinct feeling in knowing your stock again but have the ability to go and flash custom ROMs all over again. i honestly just miss the torch feature and the easy brightness slider on the pulldown.
im getting h+ but it doesnt seem like true h+ speed and i also lose h+ while holding the phone. im waiting for this to change with tmobile and thier 1900mhz i hope it does or ill be looking into whats going on with the modem maybe
Click to expand...
Click to collapse
Fixed... I think. And "zedo" refers to the sh;t zedomax has on gs2root.
Clay
Team Pirate
Sent from my Buttery Pink SGH-i777
Ok thats where I'm a bit concerned because I ran into an issue before where I was going to do a flash and it choked up on me (mind you it was a pit and tar flash repartition) and it bricked on me but I was able to reflash the same process again once the pc was ok again. I also had on flash that was the 2.3.5 leak but flashed over that and it was fine. Now with that said the phone flashed well, and now it runs generally like it should have in the first place. But my question is did that fluke flash do anything negative to the device behind the scenes that will never be ok again?
creepyncrawly said:
The danger in using those files is in the flashing. If a flash is inadvertantly interrupted or goes bad, then it can hard brick the phone. Once the flash is complete and successful, then you're fine. There are no side effects.
Force closes, and other anomalies can be caused by conflicting data is the system and data partitions. They can also be the result of bugs in the firmware distribution or in any of the various applications. To eliminate the first cause, following all the best proceedures when flashing such as wiping first, etc eliminates the possibility that the fc's are caused by improper proceedure.
With proper installation proceedure, and with a stable firmware, and with robust applications, you should experience little to no fc's.
Click to expand...
Click to collapse
Ok thats where I'm a bit concerned because I ran into an issue before where I was going to do a flash and it choked up on me (mind you it was a pit and tar flash repartition) and it bricked on me but I was able to reflash the same process again once the pc was ok again. I also had on flash that was the 2.3.5 leak but flashed over that and it was fine. Now with that said the phone flashed well, and now it runs generally like it should have in the first place. But my question is did that fluke flash do anything negative to the device behind the scenes that will never be ok again?
Sorry for double post but I wanted to make sure my questions are targeting creepy seeing as this thread is getting a bit off topic.
GalaxyHackster85 said:
Ok thats where I'm a bit concerned because I ran into an issue before where I was going to do a flash and it choked up on me (mind you it was a pit and tar flash repartition) and it bricked on me but I was able to reflash the same process again once the pc was ok again.
Click to expand...
Click to collapse
As far as I know, that would be fine. Someone with dev experience could look into partition sizes on the phone, and see what actually happened. As long as the firmware is functioning correctly, then I would assume the partition sizes are correct.
I also had on flash that was the 2.3.5 leak but flashed over that and it was fine.
Click to expand...
Click to collapse
I guess you didn't get a crippled bootloader. That was the main problem with some of the leaks.
Now with that said the phone flashed well, and now it runs generally like it should have in the first place. But my question is did that fluke flash do anything negative to the device behind the scenes that will never be ok again?
Click to expand...
Click to collapse
I don't know how to look behind the scenes... but I would think your phone is fine.
creepyncrawly said:
As far as I know, that would be fine. Someone with dev experience could look into partition sizes on the phone, and see what actually happened. As long as the firmware is functioning correctly, then I would assume the partition sizes are correct.
I guess you didn't get a crippled bootloader. That was the main problem with some of the leaks.
I don't know how to look behind the scenes... but I would think your phone is fine.
Click to expand...
Click to collapse
OK great info and definitely a relief but just out.of curiousity what are the repercussions of a bad bootloader flash or an improper pit flash? And how would we know that whatever pit or bootloaders flashed weren't for our phone or are corrupted data?
creepyncrawly said:
As far as I know, that would be fine. Someone with dev experience could look into partition sizes on the phone, and see what actually happened. As long as the firmware is functioning correctly, then I would assume the partition sizes are correct.
I guess you didn't get a crippled bootloader. That was the main problem with some of the leaks.
I don't know how to look behind the scenes... but I would think your phone is fine.
Click to expand...
Click to collapse
And trust me I absolutely appreciate all the responses the answer to my last question is all I needed to know to truly understand how the i777 works and functions and I commend you for that. I felt that trying to find all these answers would have been trying to find a needle in a haystack.
Also regarding the repartioning I just wanted to make sure that everything is correct in terms of space. My device is showing only 1.89gb of "Device Memory" at the bout of the "Storage" screen is this normal I though it was higher before but I cant quite remember.
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737
Wow! I need some help. I've acquired a Samsung Galaxy Note (i717, I believe) that shows all the signs of being healthy (appearance, touch screen, etc.) but persistently slows down at the ATT opening splash screen, begins to load Android, dies and reboots. Whatever variant rooted ROM I received it with (sluggish and unreliable) I have written over and now I can't get any farther than the Android settings screen. Therefore I do not know the exact version nor can I begin to set it up (wifi, etc.).
That's the 'presenting problem', so let me explain what I've done to this point (about 25 hrs. worth!). I have reloaded latest version of CWM (runs great) and then Padawan JB . . . same symptoms. I have loaded the ATT JB and ICS via the latest Odin successfully . . . with same symptoms. I have loaded TWRP (touch screen is snappy and works as it should) and Padawan JB again . . . with same symptoms. I have wiped caches before, after, and in between till I'm blue in the face, each time with the same symptoms. Most recently I have done a hard reset to native/factory settings . . . with no change! I've tried to scour the XDA (and any other sites) trouble shooting articles and seem to have come to a dead end.
Here's a couple things that I'm wondering: because I can't get deep enough into Android to check out the model number, could the phone be something other than an ATT model? At the top of the front face it simply says 'Samsung', not ATT at top and Samsung at bottom like my previous ATT Note. Right after boot I persistently get an ATT splash screen which would lead me to believe that it is ATT. Is there some other way to find model, say in TWRP? Do I need a phone specific version of Android? Second, everything seems to be working fine physically (i.e., no hardware problems). Could this thing have gotten a virus in an earlier life that's preventing the ROM from working right? I've not been able to get far enough to register it with my cell provider (second party, not ATT). Must you be up and running with the cell service to correctly load and use the ROM (wouldn't think so)? And if so, how without Android working? I've been using and playing with computers for 25 years, but I'm fairly new to the Android system (but learning fast!) Any help would sure be appreciated. I'd really like to resurrect this baby. I loved my first Note (till it fell off the car and disappeared).
pstrulm said:
Wow! I need some help. I've acquired a Samsung Galaxy Note (i717, I believe) that shows all the signs of being healthy (appearance, touch screen, etc.) but persistently slows down at the ATT opening splash screen, begins to load Android, dies and reboots. Whatever variant rooted ROM I received it with (sluggish and unreliable) I have written over and now I can't get any farther than the Android settings screen. Therefore I do not know the exact version nor can I begin to set it up (wifi, etc.).
That's the 'presenting problem', so let me explain what I've done to this point (about 25 hrs. worth!). I have reloaded latest version of CWM (runs great) and then Padawan JB . . . same symptoms. I have loaded the ATT JB and ICS via the latest Odin successfully . . . with same symptoms. I have loaded TWRP (touch screen is snappy and works as it should) and Padawan JB again . . . with same symptoms. I have wiped caches before, after, and in between till I'm blue in the face, each time with the same symptoms. Most recently I have done a hard reset to native/factory settings . . . with no change! I've tried to scour the XDA (and any other sites) trouble shooting articles and seem to have come to a dead end.
Here's a couple things that I'm wondering: because I can't get deep enough into Android to check out the model number, could the phone be something other than an ATT model? At the top of the front face it simply says 'Samsung', not ATT at top and Samsung at bottom like my previous ATT Note. Right after boot I persistently get an ATT splash screen which would lead me to believe that it is ATT. Is there some other way to find model, say in TWRP? Do I need a phone specific version of Android? Second, everything seems to be working fine physically (i.e., no hardware problems). Could this thing have gotten a virus in an earlier life that's preventing the ROM from working right? I've not been able to get far enough to register it with my cell provider (second party, not ATT). Must you be up and running with the cell service to correctly load and use the ROM (wouldn't think so)? And if so, how without Android working? I've been using and playing with computers for 25 years, but I'm fairly new to the Android system (but learning fast!) Any help would sure be appreciated. I'd really like to resurrect this baby. I loved my first Note (till it fell off the car and disappeared).
Click to expand...
Click to collapse
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory reset in between.
fbauto1 said:
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory
I would reflash cwm thru odin after that I would flash the latest TWRP 2.5. Then you can flash whatever. If padawan is givin u problems try something else like AOSP or AOKP. Padawan is TW based. JaimeD builds are pretty sweet.
sent from my GalaxySuperNote running OC Padawan JB
Click to expand...
Click to collapse
androidmechanic said:
fbauto1 said:
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory
I would reflash cwm thru odin after that I would flash the latest TWRP 2.5. Then you can flash whatever. If padawan is givin u problems try something else like AOSP or AOKP. Padawan is TW based. JaimeD builds are pretty sweet.
sent from my GalaxySuperNote running OC Padawan JB
Click to expand...
Click to collapse
If you want TWRP, flash TWRP. No need to flash CWM
Click to expand...
Click to collapse
AT&T Phones have a [logo}AT&T] on the top-center!!
But if you are in doubt, use kies to do a full recovery-restore [WILL ERASE EVERYTHING ON YOUR DEVICE].
See post #4 on this thread.
fbauto1 said:
androidmechanic said:
If you want TWRP, flash TWRP. No need to flash CWM
Click to expand...
Click to collapse
If you go thru Odin you would have cwm first. With the problems talked about, I would go back factory stock then re-root with Odin. Then thru cwm, flash twrp or whatever floats your boat.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
androidmechanic said:
If you go thru Odin you would have cwm first. With the problems talked about, I would go back factory stock then re-root with Odin. Then thru cwm, flash twrp or whatever floats your boat.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
fbauto1 said:
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
Click to expand...
Click to collapse
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
fbauto1 said:
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
Click to expand...
Click to collapse
androidmechanic said:
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
you are both actually correct, however, I am looking at PSTRULM's stats. if he is anything like me when I started, the more simple and less complication involved in the process, the more he may understand.
ANDROIDMECHANIC is stating the most basic and beginner way to do this and understand simply. after doing this a few times as I did, the basic mechanics of the process will become more fluent.
then he can make his own decisions as to methods which might be easier for him, without confusing.
I am sure you both are a huge help to everyone and I thank members such as yourself for your efforts. ME, I prefer baby steps, cause I know I can really EFF things up if I get confused
androidmechanic said:
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Just a reminder.. when flashing through Odin, make sure it's an ODIN-flashable tarball, i.e., you can't flash a recovery-type zip through Odin and vice versa.