Got it working with SixAxis! Set it up using 1 joystick.
Controller doesnt work in the game menus but works perfectly once the race starts. Graphics are AWESOME too.
Related
Anyone got this installed yet? I keep getting a parsing error.
Yup works for me.. my sixaxis controller pairs and works too! Street Fighter rocks on this. Snesoid works perfect too
when you pair the sixaxis does it auto config the buttons? I'm having a problem with nes.emu auto config buttons assigning a loading menu to A.
No, you have to go in and map them manually - it saves for future use though.. here's a video of it pairing and running SNESoid..
http://www.youtube.com/watch?v=5VZkNXxeutU
Played few games in FPse worked perfectly.
same here, FF VII, MGS and parasite eve work perfectly, along with the following emulators (all working with sixaxis & wiimote):
FPSe
NESoid
SNESoid
Gensoid
GBCoid
Gameboid
N64oid
fMSX
MAME4droid
im looking to purchase the tablet s but i was wondering if fpse works with the ps3 controller on it? and the genesis snes and n64 emulators? can anyone verify?
I've got issues with FPSE, and running out of memory but the deve isn't sure why.
i can confirm that a ps3 controller once paired (for wireless operation) with the tablet s has worked with every emulator i have tried, and i think i have tried them all, well the major ones anyways. very happy overall with the tablet s so far
I can confirm that the PS3 wireless controller connecting to this tablet works with every emulators that is working on the tablet. NES SNES N64 etc... ofcourse you have to key the buttons...
I can also confirm that the ps3 controller works with all emulators i've tried (fpse, nesoid, gensoid, snesoid, gameboid, gbcoid, ataroid, gearoid, n64oid) but i do have a bit of an issue when it comes to N64oid. The way the tablet reads the controller (when it comes to the emulators) is the digital controls and the left analog stick are mapped to the same controls (ie pushing up on the digital control and pushing up on the left analog stick both register as "DPAD Up" when mapping controls). In addition to that the right analog stick doesn't register anything at all with exception of pushing it down as a button. What it comes down to is there doesnt seem to be enough buttons to properly map an N64 controller. You can still play games but you cant really play anything that utilizes the whole n64 controller.
FPSE all the way. I've only put maybe 4-5 hours into it, but I haven't run across any memory issues so far.
SNES droid also apears to work perfectly.
UPDATE WILL BE AVAILABLE SHORTLY (LIKE WITHIN THE NEXT HOUR)
Sir_earl (Sixaxis App Developer) has just released an update to his popular app Sixaxis Controller. The update brings "Native Gamepad" support over Bluetooth with the PS3 Sixaxis/Dualshock controller. This means a USB OTG setup is no longer needed to enjoy games with gamepad support such as Shadowgun and GTA III.
Gamepad Mode can be enabled by doing the following steps:
1. Purchase Sixaxis Controller from the Google Android Market. https://market.android.com/details?id=com.dancingpixelstudios.sixaxiscontroller&hl=en
2. Configure the app to allow it to connect to your Touchpad by using the Sixaxispairtool from the developers Website. http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html (This is only needed once)
3. Sync the sixaxis controller by pressing "Start" in the sixaxis controller app and pressing the Power button on the Controller.
4. If you are on ICS, press the Action button on the top right to go to the preferences Menu.
5. Select Gamepad on the top and enable it on the next screen.
6. Modify the button mappings to your liking. (Optional)
Games like Shadowgun and Riptide GP need the controls mapped in their respective settings menu.
.GTA III is ready out out of the box. Enjoy guys! Now get to emailing your favorite game developers and tell them to add native gamepad support!
List of games with full or partial gamepad support.
(Full) Shadowgun.
(Full) GTA III
(Full) Riptide GP
(Partial) Shine Runners (Can't control Menus)
(Partial) Cordy (Menus)
(Partial) Sleepy Jack (Menus)
(Partial) Reckless Racing and Reckless Getaway (Menus)
(Partial) Muffin Knight (LOLWUT)
BTW Guys this will only work on Android 3.1+. So that means this is a no go on CM7.
CM7 didn't have native support. That is where sixaxis App will help you to pair PS3 controller with touchpad. So 3.1+ is not a mandatory requirement.
lathavim said:
CM7 didn't have native support. That is where sixaxis App will help you to pair PS3 controller with touchpad. So 3.1+ is not a mandatory requirement.
Click to expand...
Click to collapse
By native support the OP means making Android regard the sixaxis as a normal gamepad and not as a hw keyboard.
I've been bouncing around everywhere trying to creak this nut. Figured here would be a good place to ask. Playing sky gamblers, it recognizes the gamepad and allows mapping of buttons, however some are still tied to back and menu buttons. Re mapping dosn't seem to solve this. Does anyone know of a workaround? Using galaxy note 3 and sixaxis software with ps3 controller.
Fixed: ended up re mapping controls to read as l3 and r3...works great...though if I bump sticks I fire mg or flare...lol
I can't get this to work with Milaq or Invisiblek's CM11 ROMs.
I followed the process using my phone, running CM11 and it worked flawlessly, but on the touchpad the controller just keeps blinking and never connects. Any suggestions?
Hi Folks, dunno if its just me, but when i try to use my 360 controller to play games like shadowgun, GTA3, etc etc they have some degree of control but mostly dont work.
GTA and Shadowgun just spin as if the analogue stick is being pressed all the time (but its not), is there any way to configure them? i have tried the ingame configurations but it also registers the constant analogue stick input.
Controller works fine on the xbox so its not that.
Anyone use this controller?
I have SuperGNES, FPse, MC3, ShadowGun, Dead Space, Dead Trigger, Minecraft, and a few other games.
1. Can anyone confirm this controller works with SuperGNES and FPse (probably these two are the most important to me)
2. Can you use a USB min-hub to get more usb ports on the dock and plug in 2 controllers
I'm looking to be able to play 2 player games and curious if others have got it to work.
Thanks
I've just gotten one of these controllers myself today. Unfortunately, I'm having trouble.
Some games work fine, like "Cordy". Another well-known game, Shadowgun, does not. The game mixes up the controls, rendering the right analog stick messed up. It thinks the left trigger is the analog sticks left/right and that the analog up/down is actually on left/right. Unplayable.
before, I've tried connecting two Xbox controllers, both wired. These work fine. You can't play with two controllers, however. Android recognizes both controllers as one, so you'll both control the same thing.
Unfortunately, I don't think there's a solution to the latter, it's a driver issue.
---
Did anyone get Shadowgun to work properly with the F710? If so, please teach me!
---
For the record, I'm using the ASUS Padfone, which is related to the transformer series.
Anyone know about emulators with the F710?
SuperGNES says you need to install gamepad IME, which is free. It installs fine, and I can see it in the settings, but there are no options to bind keys...which makes me think its all in the games but I cant figure out supergnes. It thinks both the A and B buttons are down, and I can't change it in the controller settings.
I just bought my controller, may return it if I can't figure this out. It works natively for Dead trigger. ...kinda pissed it doesn't work the same for superGNES.
After having tested the logitech controller, I've decided to get rid of it and go for Sixaxis with a PS3 controller. It's just way more configurable.
Billyvnilly said:
Anyone use this controller?
I have SuperGNES, FPse, MC3, ShadowGun, Dead Space, Dead Trigger, Minecraft, and a few other games.
1. Can anyone confirm this controller works with SuperGNES and FPse (probably these two are the most important to me)
2. Can you use a USB min-hub to get more usb ports on the dock and plug in 2 controllers
I'm looking to be able to play 2 player games and curious if others have got it to work.
Thanks
Click to expand...
Click to collapse
I've had my controller for about 6 months now and there is a way to play ShadowGun with it. You just have to manually map the controller yourself in the options menu for game pad input. Haven't used SuperGNES but I use another emulator called SNESoid and it allows me to map the controller out.