lost 3g last night tried flashing older radios no luck tried flashing different roms no luck dont know what else to do. someone please help
gfullwr70 said:
lost 3g last night tried flashing older radios no luck tried flashing different roms no luck dont know what else to do. someone please help
Click to expand...
Click to collapse
Whats your PRL?
A bad PRL seems to be the cause as there are quite a few people, if not all owners of EVO 3D's that are having this issue. Stuck on 1x since I updated the PRL this morning....
Yeps if you recently did a PRL update OTA some reports no 3g just 1x. Go here for more info.
http://forum.xda-developers.com/showthread.php?t=1244825
thanks
thanks guys found all the info fixing it now think i'm gonna try the 00001.prl LOL
just flashed the 00001.prl posted and WOW fastest I've ever seen on 3G
aznmode said:
Yeps if you recently did a PRL update OTA some reports no 3g just 1x. Go here for more info.
http://forum.xda-developers.com/showthread.php?t=1244825
Click to expand...
Click to collapse
You can grab the old epst.apk and install it to your phone. Then, download the old PRL (mine was 21081)....in the dialer, type ##775#....enter MSL code....Click on Update PRL....unzip the PRL to the root of your SD card and update. Once done, commit the modifications (menu--->Commit mods), reboot phone and I got my 3G back...yeah for me!! Hope it helps you out...
Related
I updated to 4.1.83, and I thought the baseband was supposed to change to N_01.77.15P. However, mine stayed at N_01.77.07P. I've lost my ability to make a data connection through AT&T, so I'm wondering if this is related to the baseband not getting updated. Any ideas how I can update the baseband in this case?
EDIT: Ended up flashing 1.57 sbf to my phone and it fixed all data problems. Not sure if this was the best thing to do, but I needed a working phone back and thought this might do it. Would still be interested to hear from the experts what they think might have been the cause of the problem and if I was right about the baseband not being updated as the cause of the problem. Thanks.
Im having some issues with my carrier (brazilan Atrix version) using N_01.77.07P.
What is the baseband version of 1.53 Version?
Waspdaimaoh said:
Im having some issues with my carrier (brazilan Atrix version) using N_01.77.07P.
What is the baseband version of 1.53 Version?
Click to expand...
Click to collapse
You might want to try the solution outlined here in post #71. I wasn't able to try it because I had already flashed back to 1.5. (Obviously, you'd have to use the APN info for your carrier in Brazil.)
I'm waiting for Motorola's reply until the weekend, after that i will change N_01.77.07P to N_01.77.15P or N_01.87.00R and see whats happens.
Flash the Atrix 4G version maybe is dangerous because the Brazilian version is only 3G but i guess its the same hardware without the 4G antenna installed.
badnokia said:
I updated to 4.1.83, and I thought the baseband was supposed to change to N_01.77.15P. However, mine stayed at N_01.77.07P. I've lost my ability to make a data connection through AT&T, so I'm wondering if this is related to the baseband not getting updated. Any ideas how I can update the baseband in this case?
EDIT: Ended up flashing 1.57 sbf to my phone and it fixed all data problems. Not sure if this was the best thing to do, but I needed a working phone back and thought this might do it. Would still be interested to hear from the experts what they think might have been the cause of the problem and if I was right about the baseband not being updated as the cause of the problem. Thanks.
Click to expand...
Click to collapse
My first attempt in beta did this. I flashed back to 26, then 57, then 83. Problem solved.
Sent from WinBorg 4G using XDA Premium App
I´ve applied the http://forum.xda-developers.com/showthread.php?t=1049434 and it seems to work very well... my upload jumps to 1MB .
The Brazilian Version are like the Telstra version.
Waspdaimaoh said:
I'm waiting for Motorola's reply until the weekend, after that i will change N_01.77.07P to N_01.77.15P or N_01.87.00R and see whats happens.
Flash the Atrix 4G version maybe is dangerous because the Brazilian version is only 3G but i guess its the same hardware without the 4G antenna installed.
Click to expand...
Click to collapse
Hello,
Do you know where I can get the N_01.77.15P radio?
I've been looking up and down without luck!
Thanks!
Rayan
I was having the same issues when I updated to 4.1.83 my At&t Atrix here in ecuador. Applied the modem from telestra from this link and now is working great. Ping times are much better and also down/up speed increased
https://rapidshare.com/#!download|9....zip|19518|R~DE4F6DB321A6FB0148F5ADEB60426DBB
i have my wifi on all the time and a few networks saved. i have wifi set up to auto connect once in rage, but sometimes it wont. its mostly when im at with work...the wifi notification will appear with a "?" over it. i need to manually select the "remembered" network for it to pick up. is there a setting im missing? my Blackberry picks it up immediately. its not the strongest signal, so maybe thats it. just wanna make sure im not missing something. and yes, my wifi sleep policy is set to none.
update your radio if it's not the latest here is a link....http://forum.xda-developers.com/showthread.php?t=1159505
it takes my phone about 5 sec to connect....i hope that's good enough for u..
deziguy420 said:
update your radio if it's not the latest here is a link....http://forum.xda-developers.com/showthread.php?t=1159505
it takes my phone about 5 sec to connect....i hope that's good enough for u..
Click to expand...
Click to collapse
im already running that i think. im using kenneths 2.3.4 beta 4.5 on 4.5.91.
dictoresno said:
im already running that i think. im using kenneths 2.3.4 beta 4.5 on 4.5.91.
Click to expand...
Click to collapse
your Baseband version should say N_01.77.30P if it's something else then you don't have the latest radio...
deziguy420 said:
your Baseband version should say N_01.77.30P if it's something else then you don't have the latest radio...
Click to expand...
Click to collapse
i have N_01.77.15P, dammit. the radio is flashable through CWM right? got a link to that one? wont effect my current ROM?
EDIT: found it and im getting ready to flash it via CWM. was the 77.15 radio known to be bad??
dictoresno said:
i have N_01.77.15P, dammit. the radio is flashable through CWM right? got a link to that one? wont effect my current ROM?
EDIT: found it and im getting ready to flash it via CWM. was the 77.15 radio known to be bad??
Click to expand...
Click to collapse
no but i have read people praising .30 radio over .15...I myself had .15 before but didn't really played with it too much and just installed .30 which i think is the latest..and didn't experience any problem yet...like bluetooth signal or wifi signal...i have also heard it improves battery life...i donno how true that is...I flashed mine using RSD...and it doesn't delete or wipe anything so ...it won't harm ur current rom...
WOW....just updated the radio using CWM. took under a minute. and bam!!! first reboot wifi picked up immediately. thanks for your help!!! guess the radio was the issue.
Anyone happen to know, or even a guess why telus would remove the GB update from their site. I've read about people have various problems with the updating, but from what I read, those problems were PC related.
Mine worked just fine.
I also have a question... is it possible to dump a stock rom and/or radio and/or kernel without having root?
Thx
Maniac
Can anyone confirm if this is true?
That is sort of strange. Im glad I was able to get it in time. And rooted too
People were losing SD cards on telus also.
Sent from my SCH-I500 using XDA App
Can anyone tell me how I can rip the rom, cause I've tried the method found on these forums for the fascinate for froyo, but when I tried to odin it back it didn't work.
So right now I'm almost afraid to shut the phone off just in case I can't boot and I have no way to get it back to stock GB.
Mainly what I want to do is make a factory image that I can put somewhere for others to download it. Cause I want to try some things but I can't until telus puts the update up again.
Maniac
fromthestars said:
That is sort of strange. Im glad I was able to get it in time. And rooted too
Click to expand...
Click to collapse
I think Telus was getting all kinds of questions on when it would be available when they had no control over it - so they made a generic upgrade page.
I just tried with Kies and I got GingerBread BUT I'm also staring a long time at a galaxy S screen - lost my clockwork mod recovery as well (back to stock 3E).
Hmmmm - anyone know if this update is still available online somewhere as I have no OTA to get it and of course as the thread says... TELUS has pulled it.
evanwier said:
Hmmmm - anyone know if this update is still available online somewhere as I have no OTA to get it and of course as the thread says... TELUS has pulled it.
Click to expand...
Click to collapse
Its back now
MrManiacNF said:
Its back now
Click to expand...
Click to collapse
Hmm, When I load Kies it tells me I have the most current firmware.
evanwier said:
Hmm, When I load Kies it tells me I have the most current firmware.
Click to expand...
Click to collapse
I'm pretty sure to upgrade through the Samsung Kies software, you will have to remove any mods / hacks that you made to your phone.
Best option probably is to flash everything back to Stock, which I did. Then had no problem updating via Kies:
http://forum.xda-developers.com/showthread.php?t=923712
Alright I'll give that a shot tonight, the only 'mod' I have done would be rooting the phone - other than that it is stock at this time.
I guess the one thing I really shouldve mentioned in my first reply is I have the Fascinate 4G with TELUS, is the update specific to the 3G+?
evanwier said:
Alright I'll give that a shot tonight, the only 'mod' I have done would be rooting the phone - other than that it is stock at this time.
I guess the one thing I really shouldve mentioned in my first reply is I have the Fascinate 4G with TELUS, is the update specific to the 3G+?
Click to expand...
Click to collapse
Oh wait! If you have the Fascinate 4G+ (T959P) then you may not want to flash everything back to 2.2.
I'm not 100% sure that it may work with 4G Fascinate.
Can anyone validate the following steps will work on his Fascinate 4G+ ?
http://forum.xda-developers.com/showthread.php?t=923712
They are different phones. If you could get the 3G+ file to flash at all (which I doubt), it would almost certainly semi brick the phone. There is an update section on telus website for fascinate 4G (just below the 3G+ entry) (no update available today). When you see the update available there, you're good to go.
I have the 4g and I won't flash anything made for the 3g. Two different phones. I remember reading a thread about people bricking the 4g while trying to put 3g stuff on it.
Hey guys Long time creeper first time poster.
Anyways i picked up a galaxy note yesterday that was bricked for about $175. The guy had soft bricked it recovery and download were still accessible so i simply used odin to reinstall stock rogers from Da_G's thread. The guy said he bricked it because he had a JB rom on there and wanted to go back to stock but odin froze and thats how the system bricked.
Anyways right now i have the system working and running Stock ICS from Rogers. The current issue i am facing is that there is some sort of issue with the signal. The device jumps between Virgin mobile(my provide) and emergency only. Constantly i cannot get a reliable signal on the phone. Calls constantly fail and messages rarely send.
I have tried flashing the stock radio for rogers from Da_G's thread as well but no luck. The apn is correct and ive tried turning LTE off, no success at all. Does anyone in the community have any suggestions this is a really frustrating problem!
Thanks
Joe-Pk said:
Hey guys Long time creeper first time poster.
Anyways i picked up a galaxy note yesterday that was bricked for about $175. The guy had soft bricked it recovery and download were still accessible so i simply used odin to reinstall stock rogers from Da_G's thread. The guy said he bricked it because he had a JB rom on there and wanted to go back to stock but odin froze and thats how the system bricked.
Anyways right now i have the system working and running Stock ICS from Rogers. The current issue i am facing is that there is some sort of issue with the signal. The device jumps between Virgin mobile(my provide) and emergency only. Constantly i cannot get a reliable signal on the phone. Calls constantly fail and messages rarely send.
I have tried flashing the stock radio for rogers from Da_G's thread as well but no luck. The apn is correct and ive tried turning LTE off, no success at all. Does anyone in the community have any suggestions this is a really frustrating problem!
Thanks
Click to expand...
Click to collapse
Flash another ROM on it. And keep in mind, it was sold to you as a brick. Maybe it also had the radio issue before you got it.
You did the ICS update via OTA?
Im downloading this rom now "UCLF6 Base Rom Featuring
The Unofficial FJ-Mod Build #11
"RISE UP!""
Will try it and see if it makes any difference.
Agoattamer said:
You did the ICS update via OTA?
Click to expand...
Click to collapse
I installed the stock ics through odin i never did any OTA's it says there are none available.
So i flashed a new rom and i still cannot complete calls or send text messages...sometimes it works and sometimes it, majority of the time it is not working...any other suggestions?
What model is it? That info is under the battery.
rangercaptain said:
What model is it? That info is under the battery.
Click to expand...
Click to collapse
SGH-I717R
Have you tried a different modern yet?
Sent from my SAMSUNG-SGH-I717 using xda premium
rquiett said:
Have you tried a different modern yet?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I have tired UCLF6 Modem and the AT&T Modem.
Joe-Pk said:
I have tired UCLF6 Modem and the AT&T Modem.
Click to expand...
Click to collapse
From what I see it looks like they use the T-mobile frequencies but I could be wrong. You may need to give a t-mobile modem a try
rquiett said:
From what I see it looks like they use the T-mobile frequencies but I could be wrong. You may need to give a t-mobile modem a try
Click to expand...
Click to collapse
I know that virgin uses HSPA+ frequencies but im willing to try anything can you send me a link to the T-mobile modem? And its safe to flash correct, shouldnt cause a hard brick?
Joe-Pk said:
I know that virgin uses HSPA+ frequencies but im willing to try anything can you send me a link to the T-mobile modem? And its safe to flash correct, shouldnt cause a hard brick?
Click to expand...
Click to collapse
Here is a link to the thread with the T-mobile modems I suggest reading up a bit in there before flashing. And as long as you are following the directions I don't see why it would not be safe to flash
rquiett said:
Here is a link to the thread with the T-mobile modems I suggest reading up a bit in there before flashing. And as long as you are following the directions I don't see why it would not be safe to flash
Click to expand...
Click to collapse
I went ahead and flashed this modem before you posted http://forum.xda-developers.com/showthread.php?t=1679722&highlight=t-mobile+modem
but so far it hasnt made a difference. i will try the one in the thread you posted now.
Tried the stock Tmous modem same issue... any other suggestions. The phone will say its on the network but i just cant send anything. sometimes it will work for 20 mins then it will stop working for a while again.
Any one know why ##778# doesn't work? trying to manually update PRL and ##DATA works fine,
94tbird said:
Any one know why ##778# doesn't work? trying to manually update PRL and ##DATA works fine,
Click to expand...
Click to collapse
u need a modded EPST
OMJ said:
u need a modded EPST
Click to expand...
Click to collapse
Do we have one for the M9 or can i use one from anywhere?
94tbird said:
Do we have one for the M9 or can i use one from anywhere?
Click to expand...
Click to collapse
we have a modded one in our ROM
OMJ said:
u need a modded EPST
Click to expand...
Click to collapse
OMJ said:
we have a modded one in our ROM
Click to expand...
Click to collapse
I am on the Bad Boys rom , and thats where its not working.
94tbird said:
I am on the Bad Boys rom , and thats where its not working.
Click to expand...
Click to collapse
flash the update in Mods App
OMJ said:
flash the update in Mods App
Click to expand...
Click to collapse
Thank you sir!
OMJ said:
flash the update in Mods App
Click to expand...
Click to collapse
I've got the updated package installed but when trying to update the prl, it can't find the file. I have my prl on the internal memory, under storage0 as well as root but it never sees the file..
94tbird said:
I've got the updated package installed but when trying to update the prl, it can't find the file. I have my prl on the internal memory, under storage0 as well as root but it never sees the file..
Click to expand...
Click to collapse
Let me rephtrase that, since I typed it on my phone while i was no the go.
Have Bad Bys rom isntalled, flashed the hacked EPST, which makes ##778# work, and it accepts my psl for edit mode. I hit prl, and when it searches for the PRL file, it finds nothing. I have placed the PRL (56023.prl) in multiple locations:
\
\storage0\
\storage0\download
\sdcard2
but it never sees the prl.
I tried typing in the path and file and committing changes but it never works.
Any ideas?
94tbird said:
Let me rephtrase that, since I typed it on my phone while i was no the go.
Have Bad Bys rom isntalled, flashed the hacked EPST, which makes ##778# work, and it accepts my psl for edit mode. I hit prl, and when it searches for the PRL file, it finds nothing. I have placed the PRL (56023.prl) in multiple locations:
\
\storage0\
\storage0\download
\sdcard2
but it never sees the prl.
I tried typing in the path and file and committing changes but it never works.
Any ideas?
Click to expand...
Click to collapse
which prl? post it..
OMJ said:
which prl? post it..
Click to expand...
Click to collapse
attached. Same prl i used on my m7
94tbird said:
attached. Same prl i used on my m7
Click to expand...
Click to collapse
Have you confirmed this works?
We already had this discussion in BadBoys Thread, Changing PRL will not change even though it says commit successful. I have tried multiple PRLs and will not change. Even using CDMA Workshop or QPST as well will not change it.
schmeggy929 said:
We already had this discussion in BadBoys Thread, Changing PRL will not change even though it says commit successful. I have tried multiple PRLs and will not change. Even using CDMA Workshop or QPST as well will not change it.
Click to expand...
Click to collapse
Lolol I just put two and two together. That was before I knew what/how to access EPST menu and what my msl number allowed me to do... Makes sense now. Thanks again schmeggy! Keep me in the loop if ya hear of any change
Anyone get a manual PRL to work yet on Sprint M9?
HTCforME said:
Anyone get a manual PRL to work yet on Sprint M9?
Click to expand...
Click to collapse
Post 13 still applies.
Ugh. Damn. Thanks anyways.. so there is no Rom that supports it yet, and no way to manually do it over CMD/fast boot or anything for the M9 yet? I am just thinking of other ways, I know you tried workshop already
HTCforME said:
Ugh. Damn. Thanks anyways.. so there is no Rom that supports it yet, and no way to manually do it over CMD/fast boot or anything for the M9 yet? I am just thinking of other ways, I know you tried workshop already
Click to expand...
Click to collapse
Nope, @schmeggy929 would have let us know if anyway was possible.
update, it finds the .prl files, and I hit commit changes, it reboots, but then when I go to settings>about it still says I'm on 55026 so it doesn't stick.. but seems like I got farther then earlier posters.. just thought Id let you guys know, maybe it will help someone figure this out! Would be nice if we could get a PRL swap working on the M9. Running Bad Boyz Rom v1.1 based on 5.0.2
HTCforME said:
update, it finds the .prl files, and I hit commit changes, it reboots, but then when I go to settings>about it still says I'm on 55026 so it doesn't stick.. but seems like I got farther then earlier posters.. just thought Id let you guys know, maybe it will help someone figure this out! Would be nice if we could get a PRL swap working on the M9. Running Bad Boyz Rom v1.1 based on 5.0.2
Click to expand...
Click to collapse
That has always been the case. PRL changing did not stick. On the last 5.0.2 ROM the modded ESPT.apk was removed due to that. Same goes with the 5.1 ROM. Are you roaming a lot?