Does anyone know if there's a kernel capable of overclocking for the new Thunderbolt 2.11.605.0 (Gingerbread)?
Ones I've tried seems to cause problems: unable to hear someone when calling them.
Thanks!
Edit: I was able to find leanKernel: minimalistic kernel (3.6.0GBtest, 8/31/11)
Tested. Works great. Running 1.6Ghz
source: http://rootzwiki.com/showthread.php...imalistic-kernel-(3.6.0GBtest-8-31-11)/page11
xstahsie said:
Does anyone know if there's a kernel capable of overclocking for the new Thunderbolt 2.11.605.0 (Gingerbread)?
Ones I've tried seems to cause problems: unable to hear someone when calling them.
Thanks!
Click to expand...
Click to collapse
There's only one I know of, maybe two....
DroidTh3ory's ROMs use modified kernels. Synergy and Chingy's ROMs use Ziggy's. Those clock all the way up to 2GHz. Unless you're willing to extract them from one of those ROMs, you're kinda stuck because Imoseyon hasn't updated his Sense kernel in eons and it's got issues running on newer builds. I think he's waiting on the source release since GB should be somewhere around the corner, based on the quality of the leaks and their frequency as of late. If that's the case, his kernels should kick some very nice ass again.
loonatik78 said:
There's only one I know of, maybe two....
DroidTh3ory's ROMs use modified kernels. Synergy and Chingy's ROMs use Ziggy's. Those clock all the way up to 2GHz. Unless you're willing to extract them from one of those ROMs, you're kinda stuck because Imoseyon hasn't updated his Sense kernel in eons and it's got issues running on newer builds. I think he's waiting on the source release since GB should be somewhere around the corner, based on the quality of the leaks and their frequency as of late. If that's the case, his kernels should kick some very nice ass again.
Click to expand...
Click to collapse
Ok, I found one! [Kernel] [GB Sense] leanKernel: minimalistic kernel (3.6.0GBtest, 8/31/11)
Tested. Works great. Running 1.6Ghz
http://rootzwiki.com/showthread.php...imalistic-kernel-(3.6.0GBtest-8-31-11)/page11
xstahsie said:
Ok, I found one! [Kernel] [GB Sense] leanKernel: minimalistic kernel (3.6.0GBtest, 8/31/11)
Tested. Works great. Running 1.6Ghz
http://rootzwiki.com/showthread.php...imalistic-kernel-(3.6.0GBtest-8-31-11)/page11
Click to expand...
Click to collapse
Check your FFC.
FCC, as in front facing cam? If that's what you mean... it's working fine.
Can you clarify?
xstahsie said:
FCC, as in front facing cam? If that's what you mean... it's working fine.
Can you clarify?
Click to expand...
Click to collapse
I always had issues of it being upside down on all the ROMs I've used.
loonatik78 said:
I always had issues of it being upside down on all the ROMs I've used.
Click to expand...
Click to collapse
Yeah, the front facing cam is working 100%. Took a test pic and did a test recording. No problems.
xstahsie said:
Yeah, the front facing cam is working 100%. Took a test pic and did a test recording. No problems.
Click to expand...
Click to collapse
I was wrong... For some reason I thought he hadn't updated that kernel in a while. It's dreamkernel that is still back in the dark ages. My bad.
LOL. Yeah, this one was released like 3 days ago. Thank goodness there's a working kernel.
Sent from my ADR6400L using xda premium
Related
Ive noticed when I flashed the synergy rom it was very lag and the 3D was annoying and I could not turn it off.
As well the font of the apps looked very blurry like.
Is it just me?
dobadoes said:
Ive noticed when I flashed the synergy rom it was very lag and the 3D was annoying and I could not turn it off.
As well the font of the apps looked very blurry like.
Is it just me?
Click to expand...
Click to collapse
Synergy uses Ziggy's kernel. Lately, his kernels have been plagued with lag and other issues, in my opinion. Chingy's ROMs use the same kernel and had the same issues. I couldn't make the lag go away except for using the performance governor, which I don't consider a viable solution to any performance problem. Whatever he does to screw up the governors also makes them impossible to modify. I switched to Imoseyon's, then DreamKernel. Both performed better than Ziggy's as far as lag, and both registered better benchmarks; between 200 to 400 better on Quadrant using the same ROM and nearly identical clock speeds. Ditch Ziggy's and try Imoseyon's kernel. I think you'll see much quicker response.
dobadoes said:
Ive noticed when I flashed the synergy rom it was very lag and the 3D was annoying and I could not turn it off.
As well the font of the apps looked very blurry like.
Is it just me?
Click to expand...
Click to collapse
Synergy is not for everyone.
If you can't roll with the big dogs...
Returned
I just went back to Gingerbread Build 2.11.605.3 for the "Ultimate" Stock Experience.
I just have not found the right ROM for me yet I guess
Thanks for the help
dobadoes said:
I just went back to Gingerbread Build 2.11.605.3 for the "Ultimate" Stock Experience.
I just have not found the right ROM for me yet I guess
Thanks for the help
Click to expand...
Click to collapse
FrankenROM... I mean Synergy, isn't for me either. If you're looking for an excellent Sense experience, BAMF is at the top of that game as far as features and performance goes. Th3ory ROMs aren't bad, and neither are Chingy's Gingeritis ROMs once you get that POS Ziggy kernel out of there.
BAMF Forever has been the best ROM I have used to this day. Smooth, very functional, and visually pleasing. Plus the Batman Easter egg is pretty sweet.
I have a question though if anybody cares to give a suggestion. I was thinking about trying a custom kernel with Forever, but I'm not sure which one to try: Lean or Dream. I'm also wondering if I would be better off leaving well enough alone. Anyone?
Sent from my HTC Thunderbolt
JBO1018 said:
BAMF Forever has been the best ROM I have used to this day. Smooth, very functional, and visually pleasing. Plus the Batman Easter egg is pretty sweet.
I have a question though if anybody cares to give a suggestion. I was thinking about trying a custom kernel with Forever, but I'm not sure which one to try: Lean or Dream. I'm also wondering if I would be better off leaving well enough alone. Anyone?
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
I've used both Imoseyon's and Dream with Forever. Both perform very nicely. I'm not sure I could even say one is better than another with any certainty. I haven't tried Lean with the smartassV2 yet. I haven't had any real issues that weren't related to radios. For some reason, depending on the radio, the screen doesn't come back on every now and then. Maybe it is the kernel, but I haven't seen anyone else talk about that issue.
Yes! I thought it was just me - I liked everything about Synergy except how it ran. I experienced the lag too and it was just really glitchy for me. But I loved how it looked - maybe I should give it another try with a different kernel.....
Sent from my ADR6400L using XDA Premium App
Can someone get me the link to BAMF forever and the other great roms you guys mentioned?
Thanks
dobadoes said:
Can someone get me the link to BAMF forever and the other great roms you guys mentioned?
Thanks
Click to expand...
Click to collapse
No but you can google it
hey guys, my friend just got this phone, and i wanted to set it up for her. i know custom roms usually seem to have an expiration date, before whatever memory tricks they use start to rape the phone.. so im looking for something with long term support.. actually, what im really looking for, is something that has android 2.2, is stable, rooted, and will let me use the hacked camera app (the one where the power button takes pictures, and you can use it during music, and take pics under 15%), and lastly has voodoo sound.. can anyone help point me to a rom that can do this?
thank you all so very much
also i was wondering, does anyone know what 2.2 base rom is the most stable?
ComRom 2.1. Every good tweak, voodoo away, and rock solid stable.
wth oops ,
power washed ed05 is probably by far the most stable froyo rom I have used. The problem is everything froyo based is no longer being supported. Com rom 2.1, evil fascination, pw ed05, geewiz, all are great froyo roms tho...you will have to try them out yourself and determine whats best.
droidstyle said:
power washed ed05 is probably by far the most stable froyo rom I have used. The problem is everything froyo based is no longer being supported. Com rom 2.1, evil fascination, pw ed05, geewiz, all are great froyo roms tho...you will have to try them out yourself and determine whats best.
Click to expand...
Click to collapse
Hello, I don't own a Fascinate, but is trying to do rom upgrade for a friend. Which of those you mentioned is open source rom?
And for the non froyo rom, is the GPS working as good as Froyo (as in accuracy of 10m or less)? Do you have to load new bootloader or else you get rainbow issue? In your opinion, which fascinate ROM version (Froyo or GB) is more stable?
kobesabi said:
Hello, I don't own a Fascinate, but is trying to do rom upgrade for a friend. Which of those you mentioned is open source rom?
And for the non froyo rom, is the GPS working as good as Froyo (as in accuracy of 10m or less)? Do you have to load new bootloader or else you get rainbow issue? In your opinion, which fascinate ROM version (Froyo or GB) is more stable?
Click to expand...
Click to collapse
honestly if you want open source, flash cm7.1, then flash jt's latest kernal, or glitch v13. gps is the best I have seen on this setup...you might run into a couple small bugs, but nothing I would consider a deal breaker.
droidstyle said:
honestly if you want open source, flash cm7.1, then flash jt's latest kernal, or glitch v13. gps is the best I have seen on this setup...you might run into a couple small bugs, but nothing I would consider a deal breaker.
Click to expand...
Click to collapse
What kind of accuracy are you getting for gps on CM7.1?
kobesabi said:
What kind of accuracy are you getting for gps on CM7.1?
Click to expand...
Click to collapse
locks within 10sec with 5ft accuracy inside my house! you need to flash one of the kernels I suggested tho...that's what will make the difference on gps performance.
droidstyle said:
locks within 10sec with 5ft accuracy inside my house! you need to flash one of the kernels I suggested tho...that's what will make the difference on gps performance.
Click to expand...
Click to collapse
Nice. Ok, thanks. I will try CM7.1 rom and latest JT kernel when I get the device again. What quadrant score are you getting on it? Is it fast too?
kobesabi said:
Nice. Ok, thanks. I will try CM7.1 rom and latest JT kernel when I get the device again. What quadrant score are you getting on it? Is it fast too?
Click to expand...
Click to collapse
2800-3000quadrant and imo is very "snappy"
droidstyle said:
2800-3000quadrant and imo is very "snappy"
Click to expand...
Click to collapse
Wow...too slow for me. Just kiddin. Is the phone hot? Oh and how is the battery life on it?
I saw the CM7.1 link.
Which link has JT latest kernel?
kobesabi said:
Wow...too slow for me. Just kiddin. Is the phone hot? Oh and how is the battery life on it?
I saw the CM7.1 link.
Which link has JT latest kernel?
Click to expand...
Click to collapse
his lates is 11/3 three finger fix...it was posted in tsm pool party thread and cm7.1 thread. battery life is decent. I normally get 14-20hrs depending on usage. about 3-4hrs screen on...that's overclocked to 1300mhz and undervolted -50uv across the board.
droidstyle said:
his lates is 11/3 three finger fix...it was posted in tsm pool party thread and cm7.1 thread. battery life is decent. I normally get 14-20hrs depending on usage. about 3-4hrs screen on...that's overclocked to 1300mhz and undervolted -50uv across the board.
Click to expand...
Click to collapse
NIce. I don't see his 11/3 three finger fix kernel anywhere on the OP of both of those threads. Do you know which page it is on? Search feature didn't find it.
I would suggest the PowerWashed Gingerbread. I've been running it for several months now and have had little/no trouble.
Sent from my SCH-I500 using XDA App
kobesabi said:
NIce. I don't see his 11/3 three finger fix kernel anywhere on the OP of both of those threads. Do you know which page it is on? Search feature didn't find it.
Click to expand...
Click to collapse
page 15 of tsm thread
if i installed cm6.1 or cm7.1 with the same flykernel, would anyone have an opinion as to which phone would be generally more solid/speedy?
i feel a bit frustrated by my experience with cm7.1 and all the ginger based roms, but it seems that many are wowed by the performance.
just looking for some opinons. thanks
i find myself in a similar situation, and am currently on the Heroine++ rom for the sake of speed, but it is quite outdated, and i've been wanting a good 2.2 rom.
anyway, from my expericen, everybody is wowed by 7.1.0 only because of how slow it used to be, it really has come a long way since GB for hit our heros, but it is still a tiny bit too slow and laggy for my liking, and i had some issues with the in call UI not responding fast enough, so i couldn't always answer phone calls or the phone would still vibrate/ring after i'd answered it.
as far as kernel goes, older roms such as 2.1 are better on the older kernel, and newer roms such as GB will probaby be expecting a newer kernel, and therefore run better with it. but i'm not sure how stable the lastest venturas/venturax is compare to flykernel.
anyway, I am rambling.
in short, i think the older roms 2.1/2.2 are the only solid and speedy roms we have, GB is still a bit too slow.
(shame that the least developed roms currently are the 2.2, espcailly the 2.2 sense roms)
Flykernel and cm6.2 cm6.1 ftw, seriously.
I've been alternating between floyo and froydvillain for a while. Froyd is slightly more smoother imo.
And then I put bharat's FroYo port on. It has been VERY good so far. There is even a great ICS theme for it by habarug. Check it out with flykernel.
Sent from my HTC Hero using Tapatalk
thanks for the tip, that is exactly what i've been doing tonight =D still getting it all set up though
notea said:
thanks for the tip, that is exactly what i've been doing tonight =D still getting it all set up though
Click to expand...
Click to collapse
How's it working for you?
Sent from my HTC Hero using Tapatalk
it's working alright, i do occationally get a force close though.
i'm not sure how the other froyo roms are set up, but this one comes with dithering off, which could explain why it feels snappier (slows down a bit if i turn on the dithering)
finding several apps to do the job of sense is pretty hard though =/ fast dialers on the hero are few and far between.
doubt i'll change it any time soon, unless i break something or chocolatefroyo gets it's carmera fixed.
good rom, not sure how different the froyo roms are though (i have no idea what happpened between cm 6.1.3 and 6.2.0)
anyway this is a little off topic now.
I recommend touchpal dialer
sent with love from me to you
saj222 said:
Flykernel and cm6.2 ftw, seriously.
Click to expand...
Click to collapse
it was my understanding that there was only cm6.1 and cm7.1?
http://wiki.cyanogenmod.com/wiki/Latest_Version#HTC_Hero_.28GSM.29
for the record my current situation is running cm6.1 with flykernel 13, and using setcpu to overclock. i would say it it like a racecar compared to my experiences on 7.1
still open to thoughts if anyone wants to continue discussing this. ultimately i just want a rock solid phone that is as snappy as possible, and i get frustrated when trying out roms that have various features that work poorly. as a result i have mostly stuck to CM stable releases.
darrencoen said:
it was my understanding that there was only cm6.1 and cm7.1?
http://wiki.cyanogenmod.com/wiki/Latest_Version#HTC_Hero_.28GSM.29
for the record my current situation is running cm6.1 with flykernel 13, and using setcpu to overclock. i would say it it like a racecar compared to my experiences on 7.1
still open to thoughts if anyone wants to continue discussing this. ultimately i just want a rock solid phone that is as snappy as possible, and i get frustrated when trying out roms that have various features that work poorly. as a result i have mostly stuck to CM stable releases.
Click to expand...
Click to collapse
Hmmm, I see your link says otherwise. When I made that statement I was just reading the CM version from the ROM I currently was running. FroydVillain I think. I just re-checked the build.prop and think I got the CM version and the Android OS version mixed together. Whoops.
saj222 said:
Hmmm, I see your link says otherwise. When I made that statement I was just reading the CM version from the ROM I currently was running. FroydVillain I think. I just re-checked the build.prop and think I got the CM version and the Android OS version mixed together. Whoops.
Click to expand...
Click to collapse
There happens to be some froyo roms which are based on 7.2, i think FroYo is and Speedmachine. Floyo 1.2 is 7.1 and 1.4 is 7.2
Habarug said:
... froyo roms which are based on 7.2 ... Floyo 1.2 is 7.1 and 1.4 is 7.2
Click to expand...
Click to collapse
i think you mean...
"... froyo roms which are based on 6.2 ... Floyo 1.2 is 6.1 and 1.4 is 6.2"
is that correct?
darrencoen said:
i think you mean...
"... froyo roms which are based on 6.2 ... Floyo 1.2 is 6.1 and 1.4 is 6.2"
is that correct?
Click to expand...
Click to collapse
Aah, yeah, of course thanks for correcting it
sent with love from me to you
Till two days ago I was also using 6.2.0 speedmachine (after testing lot of GB ROMs), and then I installed 2.3.7 LiGux:
http://forum.xda-developers.com/showthread.php?t=1435655,
it is using LV kernel, and I must say that it is fast and look very nice (thanks to Lirasina ICM theming).
This is based on the ROM joelZ9614 posted on June 27th.
It's deodexed and stripped of most Verizon apps and some HTC apps while keeping Sense.
This is different than the original release I had planned. This is close to the version I use since joelsZ9614's is coming.
This is PURE HTC stock. There's no themes, no EQS and little tweaks.
Xposed installer is included, use the MoDoCo ToolKit and other XPosed apps to make some of the usual mods.
Everything is working(?) but Zoe and Panoramic sweep.
This is VERIZON ONLY. It's been reported that MMS does not work with GSM.
Here's a few flashable additions: to the ROM:
HTC Music
HTC Calender
xLOUD
There's is now some tweaks included that I've tested but my init.d didn't make all the changes.
Recommend Trickster Mod Settings are:
Read Ahead Buffer Size: 384 (seems high but benchmarks the highest)
Deadline
fifo_batch: 8
front_merges: 1
read_expire: 30
write_expire: 250
writes_starved: 1
Conservative
down_threshold: 30
freq_step: 25
sampling_down_factor: 5
up_threshold: 60
Multicore Power Saving: 2
ALL thanks go to joelZ9614 for the ROM, crpalmer for the kernel, and zepplinrox for the supercharging.
New Link: http://www.adrive.com/public/VtDSSv/dlx_Sense5_070413.zip
md5: d9dc74de1ed3d78005391166562ee655
*There's been some cleaning inside the ROM. A wipe is NOT necessary, but if coming from the first ROM I posted, but I'd recommend formatting /system.
*This version also has less apps stripped since people seem to like apps I don't use.
fr4nk1yn said:
On hold. Jumped too soon, will be up sometime tomorrow.
Click to expand...
Click to collapse
Moderator, Please delete or close thread.
is this what i think it is>
Evilmonstertruck said:
is this what i think it is>
Click to expand...
Click to collapse
More vaporware for the DNA!
It's a stripped version of the ROM Joel posted last week.
I deodexed, and got it to flash. His is coming soon so I pulled the link. If he gives permission I'll gladly post
for people wanting to give it a go.
Verizon and a lot of HTC apps are removed while still keeping Sense.
Mirrors or hosting will be helpful before hand.
fr4nk1yn said:
I'm posting early. JoelZ9614's ROM is coming. This is based on the ROM he posted last week.
It's deodexed and stripped of most Verizon apps and the HTC apps that <I> don't use while keeping Sense.
This is different than the original release I had planned. This is the version I use again, since joelsZ9614's is coming soon.
All credit goes to joelZ9614 and crpalmer. They've done the work and it's hard.
This is PURE HTC stock. Been using this for a couple days, everything is working but Zoe and Panoramic sweep.
Xposed installer is included, the MoDoCo ToolKit takes care of some of the usual mods.
With all that said here's the link: http://goo.gl/akLyz
If you like it and can mirror please do as i'm not a developer and this is the best hosting I could come up with without ads.
This has been a learning experience.
Developers should get more credit than they get. This stuff is hard, and even uploading is major hassle.
Click to expand...
Click to collapse
Sounds great, will give it a test run
any screenshots?
rohitece06 said:
any screenshots?
Click to expand...
Click to collapse
It's basically Sense 5 rom, nothing out of the ordinary, you can look at any other sense 5 rom's screen shot - it would be the same
What about smoothness and responsiveness? I can't use newt's sense 5 rom because it makes my phone feel extremely clunky..
Apparently I can't post a link. Don't know if I could put images in.
But as nimrodsv said it's pure. No theming at all.
I had no problem with newtoroot's ROM being laggy.
But it's been running well for me without any kernel tweaking yet.
jbarcus81 said:
What about smoothness and responsiveness? I can't use newt's sense 5 rom because it makes my phone feel extremely clunky..
Click to expand...
Click to collapse
I had the same feelings until I used Beaups kernel. No issues now. Actually running very smooth and excellent battery life.
rom116 said:
I had the same feelings until I used Beaups kernel. No issues now. Actually running very smooth and excellent battery life.
Click to expand...
Click to collapse
I keep seeing posts where people say that the newt Rom is laggy. Ive been running it for about 2 weeks now and just flashed beaups kernal the other day but even before flashing that kernal I had zero issues with lag. In fact, I have not had a single issue at all since flashing this Rom. That's pre beaups kernal and post. Did I just get lucky somehow with a fluke flash that turned out to be beneficial? Am I the only person that has not experienced any lag?
Sent from my HTC6435LVW using xda premium
did nybody try Xposed framework?
Krispenwah said:
I keep seeing posts where people say that the newt Rom is laggy. Ive been running it for about 2 weeks now and just flashed beaups kernal the other day but even before flashing that kernal I had zero issues with lag. In fact, I have not had a single issue at all since flashing this Rom. That's pre beaups kernal and post. Did I just get lucky somehow with a fluke flash that turned out to be beneficial? Am I the only person that has not experienced any lag?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Every phone is different. My phone hates overlclocking. If I run my phone over 1600 it reboots. No matter what kernel it is. So, maybe it is laggy on his phone.
rohitece06 said:
did nybody try Xposed framework?
Click to expand...
Click to collapse
Don't try the Tablet ui . Obviously Sense lacks a tablet ui and bad things happen.
Evilmonstertruck said:
Every phone is different. My phone hates overlclocking. If I run my phone over 1600 it reboots. No matter what kernel it is. So, maybe it is laggy on his phone.
Click to expand...
Click to collapse
This is the truth.. We all have the same hardware.. but there could be very subtle differences in something that could cause some of us to lag and others not.. Ran into the same issues when I had my Incredible 2 .. I was flawless with every rom, 99% of the time.. others weren't.. Just the way she goes..
at production, the CPU of the phone was labeled based on processing tolerances. there is slow, nominal, fast, and faster. each one reacts differently to OC and UV ect
My mobile network is saying disconnected after setup I can't seem to get it on even tryed wiping and reflashing any suggestions?
curly9 said:
My mobile network is saying disconnected after setup I can't seem to get it on even tryed wiping and reflashing any suggestions?
Click to expand...
Click to collapse
Maybe try toggling airplane mode on and the back off.
Sent from my HTC6435LVW using xda premium
Tried that. Also full wipe and clean install and still nothing. Never had this issue before.
Sent from my HTC6435LVW using xda premium
Hi All,
I'm looking for a stock TouchWiz (TW) Kernel for JB 4.1.2.
No OC, no BLN, just a stock kernel.
I know they are included in several roms, but i'm trying to add it to a rom that doesn't offer a stock kernel version. I found one that was close, but for whatever reason it removed vibration control.
The OC versions (with and without) both remove the function of my capacative buttons.
So my question is... Does anyone have a stock TW 4.1.2, non OC kernel or if not, would a dev be so kind as to rip it and make one available?
Thanks so much for your assistance.
-Logic
Logic717 said:
Hi All,
I'm looking for a stock TouchWiz (TW) Kernel for JB 4.1.2.
No OC, no BLN, just a stock kernel.
I know they are included in several roms, but i'm trying to add it to a rom that doesn't offer a stock kernel version. I found one that was close, but for whatever reason it removed vibration control.
The OC versions (with and without) both remove the function of my capacative buttons.
So my question is... Does anyone have a stock TW 4.1.2, non OC kernel or if not, would a dev be so kind as to rip it and make one available?
Thanks so much for your assistance.
-Logic
Click to expand...
Click to collapse
the only thing I can think of which may come close, but I don't know cause you didn't say what ROM you are running and they need to be compatible, might be a KERNEL from BLOWNFUZE. it is 4.1.2 made for BIGFAU and his BLACK JELLY. I was trying to compare what it has and what you dont want. maybe you should look for yourself, you can find it on p.115 of AOKP ROM thread.
might be as close as you can get without finding some one to tear their work apart for a single request. PHASE KERNEL would be the only other I know of, but it has OC/UV.
unless there is something I don't know about, which IS possible as unfortunately I dont know everything.
good luck
whatever you try, make a back up first buddy
Logic717 said:
Hi All,
I'm looking for a stock TouchWiz (TW) Kernel for JB 4.1.2.
No OC, no BLN, just a stock kernel.
I know they are included in several roms, but i'm trying to add it to a rom that doesn't offer a stock kernel version. I found one that was close, but for whatever reason it removed vibration control.
The OC versions (with and without) both remove the function of my capacative buttons.
So my question is... Does anyone have a stock TW 4.1.2, non OC kernel or if not, would a dev be so kind as to rip it and make one available?
Thanks so much for your assistance.
-Logic
Click to expand...
Click to collapse
Here is what I found.
http://forum.xda-developers.com/showthread.php?p=44059263
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
captemo said:
the only thing I can think of which may come close, but I don't know cause you didn't say what ROM you are running and they need to be compatible, might be a KERNEL from BLOWNFUZE. it is 4.1.2 made for BIGFAU and his BLACK JELLY. I was trying to compare what it has and what you dont want. maybe you should look for yourself, you can find it on p.115 of AOKP ROM thread.
might be as close as you can get without finding some one to tear their work apart for a single request. PHASE KERNEL would be the only other I know of, but it has OC/UV.
unless there is something I don't know about, which IS possible as unfortunately I dont know everything.
good luck
whatever you try, make a back up first buddy
Click to expand...
Click to collapse
The rom I'm running is [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0 but my intention was just to have the kernel as a standalone option for those that just want the stock kernel.
The problem I'm having with the OC kernels (Fuze and Da_G) is that the capacitive lights are not working with them. Fuze's works for for BLN, but i'm not using BLN. Functionally, both of those kernels are super fast and I have no issues with stability or performance.
For now, I'm ok with living without it as it's a nice to have and not a need so I respect your opinion in being the only one to request such a kernel. My sole thought was just to have it as an option for those that don't need/want OC and are fine with stock functionality for the kernel.
I didn't think AOKP kernels could be used with TW roms, am I mistaken in that?
Logic717 said:
The rom I'm running is [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0 but my intention was just to have the kernel as a standalone option for those that just want the stock kernel.
The problem I'm having with the OC kernels (Fuze and Da_G) is that the capacitive lights are not working with them. Fuze's works for for BLN, but i'm not using BLN. Functionally, both of those kernels are super fast and I have no issues with stability or performance.
For now, I'm ok with living without it as it's a nice to have and not a need so I respect your opinion in being the only one to request such a kernel. My sole thought was just to have it as an option for those that don't need/want OC and are fine with stock functionality for the kernel.
I didn't think AOKP kernels could be used with TW roms, am I mistaken in that?
Click to expand...
Click to collapse
that is true, but as I said and as BLOWNFUZE states in his post, he designed it for BIGFAU and his ROM. its sounds and looks as if ANTHONY has provided an option too. his is the PHASE KERNEL though isn't it ? that's why I went back and edited my original for you to make back up, whatever you do.
let us know what you try and if it works, others may be curious.
Logic717 said:
The rom I'm running is [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0 but my intention was just to have the kernel as a standalone option for those that just want the stock kernel.
The problem I'm having with the OC kernels (Fuze and Da_G) is that the capacitive lights are not working with them. Fuze's works for for BLN, but i'm not using BLN. Functionally, both of those kernels are super fast and I have no issues with stability or performance.
For now, I'm ok with living without it as it's a nice to have and not a need so I respect your opinion in being the only one to request such a kernel. My sole thought was just to have it as an option for those that don't need/want OC and are fine with stock functionality for the kernel.
I didn't think AOKP kernels could be used with TW roms, am I mistaken in that?
Click to expand...
Click to collapse
I posted a link to a TW Stock rom that was ripped from BlackJelly by Anthony(Stock_TW_4.1.2.zip), Isn't that what you wanted? I haven't tried it as I am running the Fuse Kernel with [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0
captemo said:
that is true, but as I said and as BLOWNFUZE states in his post, he designed it for BIGFAU and his ROM. its sounds and looks as if ANTHONY has provided an option too. his is the PHASE KERNEL though isn't it ? that's why I went back and edited my original for you to make back up, whatever you do.
let us know what you try and if it works, others may be curious.
Click to expand...
Click to collapse
Yeah, I realized the BlownFuze was meant for BlackJelly and it works just fine with the ROM I'm using. The [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0 uses the Da_G version 4 which has a slow charge issue, that's why I reverted to v3 which doesn't have the slow charge issue. Da_G is working on that, but even with that Kernel the capacitive buttons don't light up so in that regard, they are both great kernels that OC, and are stable, but don't enable the capacitve so they're in the same boat for me.
The phase kernel I need to try again to verify that the capacitive buttons don't light up, but if memory serves, it only works fluidly with smartass V2 as the governor. Again though, with the capactive issue, it's in the boat with the other OC roms.
Those were the only Kernels (one exception that I'll note in response to the next post) for 4.1.2 TW that I was able to locate which lead me to the post. I certainly have headed your advice regarding a backup and I have 2 just in case .
As I said, it's a nice to have, not a requirement. I'll update this if anything changes.
GPFerror said:
I posted a link to a TW Stock rom that was ripped from BlackJelly by Anthony(Stock_TW_4.1.2.zip), Isn't that what you wanted? I haven't tried it as I am running the Fuse Kernel with [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0
Click to expand...
Click to collapse
Yeah, I tried that one as Anthony linked it in the thread, but it removed vibration for me and I ended up missing several notifications during work hours because of it.
Otherwise, it worked just fine in terms of capacitive buttons lighting up. You're welcome to try it and confirm my findings.
GPFerror said:
I posted a link to a TW Stock rom that was ripped from BlackJelly by Anthony(Stock_TW_4.1.2.zip), Isn't that what you wanted? I haven't tried it as I am running the Fuse Kernel with [ROM][4.1.2][Padawan-Kang] Prophylactic 1.0
Click to expand...
Click to collapse
my bad GPFERROR. good eye in finding that
I had a nandroid of the stock 4.1.2 ROM so I just went into TWRP and restored only the boot image from the stock ROM which gave me the stock kernel. Everything is working fine.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
i have been running phase kernel on stock rooted 4.1.2 for months and have never had issue with lights not working. are you sure its not a rom issue. and the obvious did you check to make sure touch key lights are not turned off?
s89281b said:
i have been running phase kernel on stock rooted 4.1.2 for months and have never had issue with lights not working. are you sure its not a rom issue. and the obvious did you check to make sure touch key lights are not turned off?
Click to expand...
Click to collapse
****EDIT**** Confirmed that it's not a kernel issue.
Thanks for this info, I suppose I didn't think about it being a ROM issue that would impact the lights. I have double and triple checked that setting toggeled it off/on and tried each one of the options with each kernel.
I guess I just assumed it was the kernel.
Any idea what in the ROM controls that? I'll reply in the original thread to see if we can figure that out.
Thanks very much for confirmation that it's not the phase kernel that' causing the touch key lights issue.
-Logic