Hi all
These are the facts. First I updated my android 2.1 to 2.3.3 sucessfully. however it didn't have root access.
So, I tried to root my Xperia X10 following this link: http://forum.xda-developers.com/showthread.php?t=1196421&page=1. Where the FlashTool is used. I was following all the steps mentiond, but in the Step 9 it failed :-S
Step 8: Power on device, after vibration connect usb cable.
Step 9: Wait till you see any info in FlashTool, then click root.
Now, every time I turn on my Xperia X10, it just showed "Sony Ericsson" text and nothing happen :-(
Please any comment on how to recover my cell phone would be very appraciate.
Thanks in advance
Lesthad09 said:
Hi all
These are the facts. First I updated my android 2.1 to 2.3.3 sucessfully. however it didn't have root access.
So, I tried to root my Xperia X10 following this link: http://forum.xda-developers.com/showthread.php?t=1196421&page=1. Where the FlashTool is used. I was following all the steps mentiond, but in the Step 9 it failed :-S
Step 8: Power on device, after vibration connect usb cable.
Step 9: Wait till you see any info in FlashTool, then click root.
Now, every time I turn on my Xperia X10, it just showed "Sony Ericsson" text and nothing happen :-(
Please any comment on how to recover my cell phone would be very appraciate.
Thanks in advance
Click to expand...
Click to collapse
Hello, seems like you haven't got the necessary drivers for flash mode
I just rooted (ten minutes ago) using aZuZu's root method, i screwed up once, then tried it again, it worked.
Just wait for text to appear or for the pc to initialise the drivers for the device.
If still no reaction from flashtool, download pc companion or update service, they would have the necessary drivers in order to flash.
Good luck.
Hi.
thanks for your response. I finally achieve to restore my Xperia X10 The thing I did was:
1.- In FlashTool, click 'Advanced' in the menu bar
2.- Select 'Root.'
3.- Choose 'Force psneuter.
http://forum.xda-developers.com/showpost.php?p=16771173&postcount=178
Then I reflash my phone and the android 2.3 was intalled sucessfully again
I hope this help other people that are facing the same problem
You failed to install the kernel downgrade and upgrade and to put your phone into debug mode.
my flash tool doesnt show root option even in 'advance' option
plz help me
chinmay104 said:
my flash tool doesnt show root option even in 'advance' option
plz help me
Click to expand...
Click to collapse
U using a method that is very old. Download new flashtool (above 0.3 I believe and use root there (it called zergrush exploit) u must do this from 2.3.3 not kernel up/down it much easier. One button root
Sent from my X10i using XDA App
Yep - zergrush is the simplest way, and also could be applied without pc
Related
Hi, i've tried two ways to unlock bootloader, by Flashtool and Xrecovery.
With flashtool I didn't get the message "Successfully applied unlock" but the phone rebooted anyway.
I triede pressing several times, the back button when the sonnyericson letters appear, tried always pressing and nothing.
Can anyone help me.
I can supply the flashtool log if necessary.
Thx
Anyone??? Do I have to do it all over again? What's the best way to re-do it?
heinz_pt said:
Anyone??? Do I have to do it all over again? What's the best way to re-do it?
Click to expand...
Click to collapse
Mate what is the exact problem?? You not getting into xrecovery or your bootloader in unlocked even after using flashtool??
Sent from my U20i using xda premium
The exact problem is I can't acess the bootlooder, when the phone is restarting.
I tried by both metod's: flashtool and xrecovery.
heinz_pt said:
The exact problem is I can't acess the bootlooder, when the phone is restarting.
I tried by both metod's: flashtool and xrecovery.
Click to expand...
Click to collapse
you mean you cannot access the x-recovery right..?? try the tool in my signature n install the CWM recovery from it.. After installing CWM recovery with the tool reboot your phone.. press the back button when sony ericsson logo comes and your done.. you can now flash Custom ROM's with CWM recovery..
Also, double check which baseband you have. It should end in x015 (x being the rest of the number). If not then you'll need to flash to the correct version. My minipro wouldnt enter xrecovery/cwm until it had been flashed to it, like you the backbutton did nothing and I couldnt find a solution for a few days.
My phone came shipped with android 1.6 and previous baseband. If you look around the forum for basebands you should be able to find it. Flash with flashtool.
Sent from my U20i using Tapatalk
Having the problem it iscoolbutton.ocx, tried the fix and still the sameproblem. My baseband ends in 15. When I run the Flashtool it gives this message:
"05/042/2012 20:42:03 - INFO - Start Flashing
05/042/2012 20:42:03 - INFO - Flashing loader
05/042/2012 20:42:05 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
05/042/2012 20:42:05 - INFO - Flashing kernel.sin
05/042/2012 20:42:07 - INFO - Flashing finished.
05/042/2012 20:42:07 - INFO - Please wait. Phone will reboot
05/042/2012 20:42:07 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
05/042/2012 20:42:07 - INFO - Device connected in flash mode
05/042/2012 20:42:09 - INFO - Device disconnected"
And then phone restarts. Any ideas?
I've done it. Installed the E10_nAa-10_2.6.29.6-nAa-10 kernell and worked. Now the problem is does detect my SD Card.
Nothing that a Format to my SD card didn't solve.
heinz_pt said:
Nothing that a Format to my SD card didn't solve.
Click to expand...
Click to collapse
The point is the nAa kernel n Mini cm7 2.8 by nobodyatall together work perfect.. This usb moutn feature is included with thr ROM.. So flash the ROM it'l be fine..
Sent from my U20i using xda premium
quick question if I may, I tried every single way to bootloader unlock my x10 mini and when I try I get a message in cmd about a daemon that doesn't start, then it says that it started succesfully and it does nothing else after that, those were my last intends to bootloader unlock, before I got messages about daemon as well,but multiple times and in the end said that it couldn't start daemon, I can't bootloader unlock my x10 mini please help!!!
Try installing the JDK and the android SDK. I unlocked my bl using the original way and those were required. Things normally work best on our phones with them
Sent from my X10 Mini Pro using XDA App
x10man said:
Try installing the JDK and the android SDK. I unlocked my bl using the original way and those were required. Things normally work best on our phones with them
Sent from my X10 Mini Pro using XDA App
Click to expand...
Click to collapse
I have the android SDK and JDK what should I do and how? could you please help?please...
SOLUTION FOR THOSE WHO COULDN'T(like myself)
[email protected] said:
quick question if I may, I tried every single way to bootloader unlock my x10 mini and when I try I get a message in cmd about a daemon that doesn't start, then it says that it started succesfully and it does nothing else after that, those were my last intends to bootloader unlock, before I got messages about daemon as well,but multiple times and in the end said that it couldn't start daemon, I can't bootloader unlock my x10 mini please help!!!
Click to expand...
Click to collapse
I found the solution for my problem, I hope it helps somebody else.
steps:
1. download Flashtool-0.5.0.0beta (ask me if you want a link)
2. download s1tools (version doesn't matter)
3. install flashtool, and restart your computer (don't install gordon's gate yet0
4. plug in your turned on x10 mini(it needs to be in usb debug mode as well)
5. wait for flashtool to recognize it
6. on the menu click on plugins,unlock boot loader(or something similar),run
7.you will get some response like this:
Root Access Allowed
INFO - Searching Xperia....
ERROR - Please plug you device in flash mode
you will get it multiple times, even a popup window indicating how to put your phone in flash mode.
8. unplug your phone and turn it off
9. now go to the directory where you installed falsh tool,drivers folder, and install gg(gg setupxxxx.exe)
10. now connect your device in flash mode(turned off, connect to pc while you hold the back button)
11. your phone will restart a couple times, just wait.
12. in my case the process ended when it rebooted in recovery mode(i had cwm recovery put in already),I manually rebooted, and voila !!!
BOOTLOADER UNLOCKED !!!!
13. run s1 tool and double check, you know, the cap letter and stuff, it shouldn't be cap anymore
x10man said:
Try installing the JDK and the android SDK. I unlocked my bl using the original way and those were required. Things normally work best on our phones with them
Sent from my X10 Mini Pro using XDA App
Click to expand...
Click to collapse
What is the "original way"?
http://forum.xda-developers.com/showthread.php?t=1254225 that is the first way of unlocking before it was implemented into flashtool. I used it when I unlocked mine
Sent from my X10 Mini Pro using XDA App
Hey Guys, I hope you are having a good day. Mine is not a good one.
I wanted my experia st15i phone to be back on stock again so I can root it. I am running a .62 firmware. I have read on doomlords thread that .62 firmware cannot be rooted, so I decided to flash it back to the stock phone .368.
I followed all the step on the flashing on the phone.
-downloaded the flashtool for experia latest version. Followed the steps
- installed the necessary drivers -adb, flashtool drivers.
- then I followed the steps to flash the phone
This error came up (see Attachment) after that I haven't been able to turn on my phone since then. Even If I tried again, still comes up the same error.
BIG PROBLEM! My phone now cannot be turned on, it keeps getting back to flash mode whenever I connect it to the computer.
Please help!
I am sorry but I only follow steps throughtout the flashing method, I don't know if I had to unlock my bootloader before I flash it, or root it.
Please help, I am currently researching now If I can turn back my phone again.
flash to stock rom.. .42 firmware is good if you want to keep root..i saw the image from that are you flashing any kernel..?beacause you are in fastboot mode..but to flash ftf file you have to be in flashmode
Error with the flashtool, phone stop working
No, I am not flashing any kernels. I was in flash mode. I was never in fastboot mode.
Ok thanks for the heads up, I'll use .42 instead.
But still currently having this problem. I can't do anything because I can't turn on the phone. If I turn it on, the logo doesn't come up and the blinking light is on GREEN, so that means I am still in flashmode (even without the connection to the computer). If I connect the phone when the flashtool is there, its says on the log that it's on flashmode.
The Big Problem is, How can I turn it on back to normal mode. releasing the flash mode. If that really is the problem, when the error came up.
Second Question. Do you have to unlock the bootloader to perform the root or flashtool. I already have installed the adb drivers.
first there is no need of unlock bootloader to flash ftf file..just download ftf file then put in firmware folder..then open flashtool... click on flash and then click on flashmod then just select your ftf file and press ok..switch off your mobile..then press volume down button and coonect your mobile to pc using usb cable..flashtool will flash that firmware...
Thanks...
But, I have already followed all those steps you said. then that error comes up (refer to the thumbnail above). After that I haven't been able to turn on the phone.
When I try to turn on the phone, the logo screen won't show and the light that blinks above the phone is green. Meaning its kinda stuck on flashmode.
I am so scared right now, if I can't fix it.
nebrossuser said:
Thanks...
But, I have already followed all those steps you said. then that error comes up (refer to the thumbnail above). After that I haven't been able to turn on the phone.
When I try to turn on the phone, the logo screen won't show and the light that blinks above the phone is green. Meaning its kinda stuck on flashmode.
I am so scared right now, if I can't fix it.
Click to expand...
Click to collapse
may be this help you..http://forum.xda-developers.com/showthread.php?t=1126358
Try to flash with wotanserver.Search on google wotanserver, make an account, download the wotanserver software, and follow the instructions.
Thanks Guys
Thanks you very much T3sla... wotan server worked great.
nebrossuser said:
Thanks you very much T3sla... wotan server worked great.
Click to expand...
Click to collapse
No problem dude, just happy to help
I'm a complete noob, all i ever did was flashing a ROM, so please don't shoot me...
So i started by reflashing 2.3.3 stock firmware. I downloaded flashtool and installed it on my pc (0.7.1.0). I rooted the phone and installed xRecovery. So now i wanted to unlock my bootloader to flash FeraLab 17.
I installed the s1 tool to check if my phone is good to be unlocked, and it says it's fine. And now i go back to flashtool to start the unlocking: plugins> bootloader unlock> run.
So all is fine till i get to this point. When i unplug my phone and power it off and then press the back button and plug it back in it says the following:
06/052/2012 16:52:00 - INFO - Device connected with USB debugging on
06/052/2012 16:52:00 - INFO - Connected device : X10
06/052/2012 16:52:00 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
06/052/2012 16:52:00 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-00054-g5f01537
06/052/2012 16:52:11 - INFO - Root Access Allowed
06/054/2012 16:54:47 - INFO - Please connect your device into flashmode.
06/054/2012 16:54:57 - INFO - Device disconnected
06/055/2012 16:55:25 - INFO - Device connected in flash mode
06/055/2012 16:55:25 - INFO - Opening device for R/W
06/055/2012 16:55:25 - INFO - Reading device information
06/055/2012 16:55:25 - INFO - Phone ready for flashmode operations.
06/055/2012 16:55:25 - INFO - Flashing loader
06/055/2012 16:55:25 - INFO - Ending flash session
06/055/2012 16:55:25 - WARN - Cancelled
06/055/2012 16:55:25 - INFO - Device connected in flash mode
06/055/2012 16:55:27 - INFO - Device disconnected
06/055/2012 16:55:28 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
and the following thing is that my phone shows a charching battery icon. It still works but i don't seem to be able to unlock the bootloader..
Does anyone have a clue what the problem is here?
KingRafox said:
I'm a complete noob, all i ever did was flashing a ROM, so please don't shoot me...
So i started by reflashing 2.3.3 stock firmware. I downloaded flashtool and installed it on my pc (0.7.1.0). I rooted the phone and installed xRecovery. So now i wanted to unlock my bootloader to flash FeraLab 17.
I installed the s1 tool to check if my phone is good to be unlocked, and it says it's fine. And now i go back to flashtool to start the unlocking: plugins> bootloader unlock> run.
So all is fine till i get to this point. When i unplug my phone and power it off and then press the back button and plug it back in it says the following:
and the following thing is that my phone shows a charching battery icon. It still works but i don't seem to be able to unlock the bootloader..
Does anyone have a clue what the problem is here?
Click to expand...
Click to collapse
Better use this method. Works great if u are not drunk.
http://forum.xda-developers.com/showthread.php?t=1254087
Sent from my LT26i using xda premium
Thanks, but this one doesnt work because the links for de azuzu upgrade and downgrade files are down ... i don't know how i can do this now...
king-iyokan said:
Better use this method. Works great if u are not drunk.
http://forum.xda-developers.com/showthread.php?t=1254087
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I have the same problem KingRafox. And i've tried several method including the link posted above.
Please make sure you have enabled usb-debugging in your current rom before starting with this!!
flash the azuzu kernel downgrade ftf with flashtool
disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again (it is supposed to be stuck at SE logo)
start the batch file for unlocking bootloader, cause it says press any button before it starts, it won't start unlocking until you press any button
now wait until flashtool recognizes your x10 (if flashtool doesn't do anything, check third post please! thx)
close flashtool and then press any button in the cmd window that the unlocking process starts (please close flashtool, instead the bl unlock cmd and flashtool are constantly killing and restarting adb!!) <--- failed!!
after unlocking is finish you have to flash azuzu kernel upgrade
now power on phone to check if the phone is starting after the unlock (if you are using a custom kernel yet with the bypass method and get stuck in a bootloop enter xrecovery and clear dalvik-cache, then your phone should boot up again fine)
power off phone and flash dooms ck v05-fs with flashtool
now flash the wifi modules for dooms ck with recovery. (atm the update.zips are for xrec, but for sure please always check dooms kernel-thread if there is anything changed)
power on phone again and if everything is right, read the line under that one
WOOOHOOO!!! Here you are with unlocked bootloader, custom kernel directly loaded AND without reflashing any rom, means you have kept your current installation
If you aren't seeing the se logo at turning on phone, but directly the custom kernel logo, you were succesfully. If you want to enter xrecovery you have to spam the back button now if the xperia logo appears instead of the se logo.
Click to expand...
Click to collapse
I've followed these instruction but it failed when running the unlock file (qsd8250_semc.cmd). It says that it failed to get root access or something. (I'll post the log later on).
I also flashed to stock 2.1, downgrade the kernel and tried using x10 Bootloader Unlock Tool (with the big "Unlock Bootloader" button). But failed.
If anyone have any other methods or any suggestion, i'm all open.
Thanks for replying.
Guys,
I've finally unlocked my bootloader using "The proper method".
The mistake (i think) was, I was on generic 2.3.3 when I use this method.
I flashed back to generic 2.1 and ran the unlock tool. When finished I check back with S1tool, my device show "r" and not "R" Yeaa...
Note that, I failed to unlock my bootloader when I was on 2.1 and 2.3.3 using latest Flashtool.
Thanks guys.
Guys,
I encountered the same situation when I using the least version of Flashtool (0.7.1.0), it always display - WARN - Cancelled
So I roll back to use Flashtool (v0.6.8.0) then plugins> bootloader unlock> run, it works
i'm using FlashTool_0.2.9.1-GBready_root_xRec, flash without any error. Try find it. .
Guys
Make sure your SEMC SIM LOCK status supported by doom kernel (forgot about status lock or unlock cause I tried only 1 times and get lucky)
from my expirence.. some many devices will be locked for the networks and it will give you EMERGENCY CALL and you OUT OF LUCK!
Sent from my Xperia X10 using xda premium
What the hell, I'm still having the same "disconnect" problem as in the original post.
Let me ask you all if I'm missing something here:
1) I have a new, Vodafone-locked X10 mini Pro.
2) I downloaded Flashtool latest
3) I used it to root the phone (ok, it worked)
4) I use the Plugin menu, then Unlock Bootloader, then you know the rest.
Am i missing something here?
Should I change kernel or install a recovery first?
If only every device was as easy as the SGS's...
Thanks guys
try this
Phk said:
What the hell, I'm still having the same "disconnect" problem as in the original post.
Let me ask you all if I'm missing something here:
1) I have a new, Vodafone-locked X10 mini Pro.
2) I downloaded Flashtool latest
3) I used it to root the phone (ok, it worked)
4) I use the Plugin menu, then Unlock Bootloader, then you know the rest.
Am i missing something here?
Should I change kernel or install a recovery first?
If only every device was as easy as the SGS's...
Thanks guys
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1759264
Devin-J said:
http://forum.xda-developers.com/showthread.php?t=1759264
Click to expand...
Click to collapse
Thanks DJ.
I've managed to Unlock the bootloader still yesterday, i don't know why or how, but it worked.
The difference from my previous post is that I started the process with the phone already in flash mode, then reboot, then flash mode again, and then the Flashtool did everything (even saying Bootloader: UNROOTABLE)
My difficulty after that was to flash CWM. It's funny but that next step is not explained anywhere.
Are these the correct procedures?
Stock Phone > Flashtool:Root > Flashtool:Unlock Bootloader > CWM (???) > Flash Image > Flashtool:Kernel
It's strange why:
1) There is no CWM to flash from Flashtool
2) The kernel cannot be flashed from CWM
CWM recovery is built in to kernels like doomlords v6 multi recovery or FXP kernel. You will have to flash a CWM based kernel to get CWM recovery
Sent from my X10i using xda premium
There should be an install recovery button in ft which allows u to install cwm or xrecovery
Sent from my GT-I9300 using xda app-developers app
Or flashing KCernel v3, got CWM recovery and Xrecovery in one.
Whitefang
Anyone help plz..
I have x10 mini pro..
I'm trying to unlock its bootloader but flashtool doesn't show any plugin..(he plugin menu is empty
What to do??
thnx in advnce
google for ominuserver. pay the 15$..
mkhawx said:
Anyone help plz..
I have x10 mini pro..
I'm trying to unlock its bootloader but flashtool doesn't show any plugin..(he plugin menu is empty
What to do??
thnx in advnce
Click to expand...
Click to collapse
If the same as x10 it blanked out as u not meet unlock requirements. U would have to check with someone else who has mini pro as not sure if it different
Sent from my GT-I9300 using xda app-developers app
Same Pb with Xperia X10
mkhawx said:
Anyone help plz..
I have x10 mini pro..
I'm trying to unlock its bootloader but flashtool doesn't show any plugin..(he plugin menu is empty
What to do??
thnx in advnce
Click to expand...
Click to collapse
Hi all,
I am having the same issue on my Xperia X10i.
When I connect my phone and run Flashtool 0.9.9, the plugin menu is empty. Any idea ?
I am trying to unlock my BL without success so far...
http://forum.xda-developers.com/showthread.php?p=17494049
teddymild said:
http://forum.xda-developers.com/showthread.php?p=17494049
Click to expand...
Click to collapse
Thanks for you help.
I have tried to enter flash mode and press RESTORE as it says. I receive a "NOTHING TO RESTORE" message...
Do you know why Flashtool does not show anyting in Plugin menu ?
i want to unlock my phone's (xperia ray 2.3.4) bootloader can someone direct me to
a post which can help me
Xperia ray - boot recovery not responding
I need help.
Following Sony's Instructions on how to unlock bootloader.
I am currently stuck at step no. 12.
I pressed the volume up (unlock button for xperia ray) as I insert the USB cable;the blue light turned on but the computer does not detect anything. I have installed Android SDK files and Google USB Driver package. I have also replaced the inf file with the latest.
My screen shows nothing every time I try to enter to boot recovery. Please help.
Or is there an easier way to unlock bootloader. Doomlords Super User flasher does not work on 4.1.b.0.431,
help! Thank you!
[email protected]
You have to use FlashTool,guys! It's official SE mode so you can lock/relock the BL when you want
please check here.
i dont know if it will work with 2.3.4.
http://forum.xda-developers.com/showthread.php?t=1560613
It's better to do it via Flashtool i Think...The procedure is this:
1. Download Flashtool,then install,then go to C:/Flashtool/drivers and install flashtool_drivers,when you've done this if your pc has a 32bit cpu,start the normal one,otherwise start Flashtool64
2. Before connecting the phone to the pc,enable USB Debugging and Unknown Sources,then connect the phone and let it install the drivers.
3. Go to FlashTool and when it recognizes your phone,click on Plugins->Bootloader Unlock->Run and follow CAREFULLY the instructions.
4. When done,voilà,you phone will have unlocked BL! But don't forget to root it
Hope I helped ya
Wolf80 said:
It's better to do it via Flashtool i Think...The procedure is this:
1. Download Flashtool,then install,then go to C:/Flashtool/drivers and install flashtool_drivers,when you've done this if your pc has a 32bit cpu,start the normal one,otherwise start Flashtool64
2. Before connecting the phone to the pc,enable USB Debugging and Unknown Sources,then connect the phone and let it install the drivers.
3. Go to FlashTool and when it recognizes your phone,click on Plugins->Bootloader Unlock->Run and follow CAREFULLY the instructions.
4. When done,voilà,you phone will have unlocked BL! But don't forget to root it
Hope I helped ya
Click to expand...
Click to collapse
ola since i dont own a ray... my frnd wants to use a custom rom .. i have the flashtool... but jst wana conferm is it safe to root n unlock bootloader via flashtool with the stock ics 4.0.4 frimware???
john_cena163 said:
ola since i dont own a ray... my frnd wants to use a custom rom .. i have the flashtool... but jst wana conferm is it safe to root n unlock bootloader via flashtool with the stock ics 4.0.4 frimware???
Click to expand...
Click to collapse
Yes, if you unlock the bootloader and flash a custom kernel it's automatically rooted.
You can Pm me if you need help with unlocking the bootoader/flashing
Sent from my Xperia Ray using Tapatalk 2
Wolf80 said:
It's better to do it via Flashtool i Think...The procedure is this:
1. Download Flashtool,then install,then go to C:/Flashtool/drivers and install flashtool_drivers,when you've done this if your pc has a 32bit cpu,start the normal one,otherwise start Flashtool64
2. Before connecting the phone to the pc,enable USB Debugging and Unknown Sources,then connect the phone and let it install the drivers.
3. Go to FlashTool and when it recognizes your phone,click on Plugins->Bootloader Unlock->Run and follow CAREFULLY the instructions.
4. When done,voilà,you phone will have unlocked BL! But don't forget to root it
Hope I helped ya
Click to expand...
Click to collapse
Rooting with official unlock method from sony would be easier i think.
Click here to get to official unlock method from sony.
Here a really good and short tutorial. Click here.
Regards
Hello, Please help!!!
I was trying to unlock my bootloader on my Xperia X10 with qsd8250_semc cmd. and Flashtool. after unlocking, my phone refused to boot up. It doesn't even show the usuall sony ericsson splash screen. When trying to flash back to stock firmware with flashtool, flashtool recognizes the phone when connected in flashmode, but then trying to flash, flashtools shows "Error flashing. Aborted" when it gets to 'Flashing Loader'. Please I need help. What do I do?
Yoozeey said:
Hello, Please help!!!
I was trying to unlock my bootloader on my Xperia X10 with qsd8250_semc cmd. and Flashtool. after unlocking, my phone refused to boot up. It doesn't even show the usuall sony ericsson splash screen. When trying to flash back to stock firmware with flashtool, flashtool recognizes the phone when connected in flashmode, but then trying to flash, flashtools shows "Error flashing. Aborted" when it gets to 'Flashing Loader'. Please I need help. What do I do?
Click to expand...
Click to collapse
Hi mate just use Sony Ericson Update Service.
Google Seus, or Sony Ericson Update Service
Just download it and start it up, and then follow the instruction's on screen.
It's Very easy to go back to stock rom.
A lil more help please
doodownunda said:
Hi mate just use Sony Ericson Update Service.
Google Seus, or Sony Ericson Update Service
Just download it and start it up, and then follow the instruction's on screen.
It's Very easy to go back to stock rom.
Click to expand...
Click to collapse
Thanks for your reply. I tried using PC Companion to revert to stock rom. but it seems Sony PC companion only detects my phone in kind of an offline mode 'cuz it doesn't show my phone name after connecting in flash mode and then when I click 'Start' on the 'Update Software' module it just shows a blank screen with only 'Back' at the left corner. am I missing something? Please can anyone help me with a step by step procedure on how to go about it
Yoozeey said:
Thanks for your reply. I tried using PC Companion to revert to stock rom. but it seems Sony PC companion only detects my phone in kind of an offline mode 'cuz it doesn't show my phone name after connecting in flash mode and then when I click 'Start' on the 'Update Software' module it just shows a blank screen with only 'Back' at the left corner. am I missing something? Please can anyone help me with a step by step procedure on how to go about it
Click to expand...
Click to collapse
Hi mate just use Sony Ericson Update Service.
Google Seus, or Sony Ericson Update Service
I use Ver - update_service_setup-2.11.4.11 And Sony Ericsson Update Engine v2.11.7.13
Try to get an one of these version's :good:
I think u miss the steps required to unlock
Sent from my X10i using xda app-developers app
Yoozeey said:
Hello, Please help!!!
I was trying to unlock my bootloader on my Xperia X10 with qsd8250_semc cmd. and Flashtool. after unlocking, my phone refused to boot up. It doesn't even show the usuall sony ericsson splash screen. When trying to flash back to stock firmware with flashtool, flashtool recognizes the phone when connected in flashmode, but then trying to flash, flashtools shows "Error flashing. Aborted" when it gets to 'Flashing Loader'. Please I need help. What do I do?
Click to expand...
Click to collapse
I copy and pasted this from another post of mine
Depending on what version of Flashtool you use! Get this one - flashtool-0.9.10.1-windows
Install flashtool and driver's from flashtool folder.
Connect and make sure your phone is recognised
Click the padlock symble to root your phone. If anyone else is doing this, as you said your already rooted
If you want to install recovery you can! click on the white cross on black background symble second from the right.
If your Bootloader is not unlocked click plugins you can unlock bootloader from there. Check if its Possible for your phone!
If it is already unlocked you wont get the menu from plugins.
Remember google is your friend find that version of flashtool - S1 tool
And use S1 tool to check if you can unlock your bootloader someone may know another tool
Goodluck