Well i go the solution after a lot of work!!!!
the first thing i did is to download gobstopper Bell 2.2.2 search in the forum
then i flashed cwm to the phone using fastboot
then i when on google and found ramfix.zip in groupoandroid.com put it in the sd internal or external
then i boot the phone in cwm and installed ramfix once finished i flash bell 2.2.2
this gave me the solution to all the problems. be sure to have at least 80% battery
then i rebooted the phone and download the new update from bell
installed with th UI from android rebooted, installed and the phone works 100%
hope this gives you a solution for you guy's.
Hi there everybody, i have this problem updating my Atrix to 2.3.4 i did almost everything and nothing is working, i got 2.2.2 gobstopper for bell atrix and its doesn't work, i did OTA with failure at gameloft_3game.zip not found.
My phine has bootloader unlocked, rooted, superuser rom manager i did almost everything and nothing works.
If someone can help me and help others it will really apreciated!!!!
xiocer said:
Hi there everybody, i have this problem updating my Atrix to 2.3.4 i did almost everything and nothing is working, i got 2.2.2 gobstopper for bell atrix and its doesn't work, i did OTA with failure at gameloft_3game.zip not found.
My phine has bootloader unlocked, rooted, superuser rom manager i did almost everything and nothing works.
If someone can help me and help others it will really apreciated!!!!
Click to expand...
Click to collapse
Did you have tenfars recovery installed? Don't use any other recovery other than the tenfar recovery for unlocked devices.. Gobstopper will fail if you try with other recoveries..
In the original gobstopper 2.2.2 post, there's instructions on how to find the proper recovery for your phone..
You can also use the Gobstopper for 2.3.4 and just skip the extra upgrade. I had the same problem, but with the PortalApp APK.
http://forum.xda-developers.com/showthread.php?t=1195922
thanx for the reply!!! No solution!!
i got tenfar's latest CWM and i try to install 2.3.4 from bell but i get error gameloft_3game.zip than i try the old 2.2.2 godstopper and i get an error message saying updating osh.bin (webtop mmcblk0p13)..
E: error in sdcard/update.zip
status 0
Installation aborded
Is there someone that can give me step to step what to do? because i am trying this since 4 days i cannot find any solution. thank you
Related
I'm a Canadian Bell user.
I've been using Android 2.2, rooted, with a little OEM bloat removed (ashphalt demo etc.). The phone decided to update to the OTA 2.3, and bricked. I flashed to OLYEM_U4_2.1.1_SIGNED_UCAOLYPORTFR_P014_A004_M001_HWolympus_1g_1FF.sbf A Bell firmware it seems, though not quite the same as the original.
Which seems to work (I have no internet, but it seems I can call/text, it'll do for I came across http://forum.xda-developers.com/showthread.php?t=1195922&page=14
I then attempted to use Bell GB 2.3.4, so I rooted, installed ROM MANAGER, unlocked the bootloader, flashed tenfar's CWM, pulled the SIM, but kept the MicroSD in (the ROM is on the MicroSD) and then attempted to flash the 2.3.4 Bell GB leak.
First time,
...
Updating BP...
Updating System...
assert failed: package_extract_file("system.img". "/internal/app.bin")
E:Errpr in sdcard/Bell-2.3.4.zip
(Status 7)
Instalation aborted.
So, I reflashed , rooted. etc. and tried again, and it froze this time at Updating BP...
Third times the charm right? aborted at the same stage as the first time.
Can someone please just call me a idiot and tell me I'm missing something silly? I read that someone else had the same error, but it worked the second try for them.
ok so first the 2.1.1 rom is the retail france rom not bell (thus why you didn't have any internet as your apns wouldn't be loaded)
I would try putting the file on the internal memory and flashing it again
I assume the cwm you have is this one http://forum.xda-developers.com/showthread.php?t=1138541
y2whisper said:
ok so first the 2.1.1 rom is the retail france rom not bell (thus why you didn't have any internet as your apns wouldn't be loaded)
I would try putting the file on the internal memory and flashing it again
I assume the cwm you have is this one http://forum.xda-developers.com/showthread.php?t=1138541
Click to expand...
Click to collapse
I can't remember how I found it to be honest, but thank you very much for informing me. Yes, that is the CWM I have.
I will try again right away.
OP, I am slightly puzzled. You were running the stock Bell 2.2 and it decided to update to 2.3 ?? The official Bell update is out ?
Travis Beane said:
I'm a Canadian Bell user.
I've been using Android 2.2, rooted, with a little OEM bloat removed (ashphalt demo etc.). The phone decided to update to the OTA 2.3, and bricked. I flashed to OLYEM_U4_2.1.1_SIGNED_UCAOLYPORTFR_P014_A004_M001_HWolympus_1g_1FF.sbf A Bell firmware it seems, though not quite the same as the original.
Which seems to work (I have no internet, but it seems I can call/text, it'll do for I came across http://forum.xda-developers.com/showthread.php?t=1195922&page=14
I then attempted to use Bell GB 2.3.4, so I rooted, installed ROM MANAGER, unlocked the bootloader, flashed tenfar's CWM, pulled the SIM, but kept the MicroSD in (the ROM is on the MicroSD) and then attempted to flash the 2.3.4 Bell GB leak.
First time,
...
Updating BP...
Updating System...
assert failed: package_extract_file("system.img". "/internal/app.bin")
E:Errpr in sdcard/Bell-2.3.4.zip
(Status 7)
Instalation aborted.
So, I reflashed , rooted. etc. and tried again, and it froze this time at Updating BP...
Third times the charm right? aborted at the same stage as the first time.
Can someone please just call me a idiot and tell me I'm missing something silly? I read that someone else had the same error, but it worked the second try for them.
Click to expand...
Click to collapse
You don't flash it with recovery you flash it with RSD Lite. It's a .sbf file not a zip file There's a billion threads on this already
mobileweasel said:
OP, I am slightly puzzled. You were running the stock Bell 2.2 and it decided to update to 2.3 ?? The official Bell update is out ?
Click to expand...
Click to collapse
Not quite sure about that, though I do know Bell wanted me to update my phone when I already had 2.2, and I must've accepted at some point, bricking my phone.
Now I'm racking my head over this, I've meticulously gone through the procedure, and I don't know what's wrong.
Flash the French 2.2 SBF
Root
Unlock bootloader
Install CWM (tried Tenfar's and another by romracer)
Install 2.3.4.zip (from both external and internal memory)
Still get the same error message at the end.
shadowskorch said:
You don't flash it with recovery you flash it with RSD Lite. It's a .sbf file not a zip file There's a billion threads on this already
Click to expand...
Click to collapse
I flashed the SBF with RSDlite, and izip from CWM.
could have been the 2.2.2 update.
have you tried to re-download the file? wondering the if the system.img file got damaged some how.
you shouldn't need to flash the french rom again (outside of just to have a device that boots)
EDIT
clear your data as well
This is what i did and not a single problem
Pt1 http://www.youtube.com/watch?v=jPQzZOj0-BA
Pt 2 http://www.youtube.com/user/TheSmokingAndroid#p/u/4/BYM-YeSH22o
Pt 3 http://www.youtube.com/user/TheSmokingAndroid#p/u/3/CwJGetPHlzE
Pt 4 http://www.youtube.com/watch?v=IcgvglaXLyM
Pt 5 http://www.youtube.com/watch?v=CzFhKFeTBuM
I am on bell and running this rom http://forum.xda-developers.com/showthread.php?t=1206767
I am on the international kernel for GB(INTL mbr_d00 original Kernel Version)
from here
http://forum.xda-developers.com/showthread.php?t=1156040&highlight=INTERNATIONAL+USERS+%28Based+on+ATT+4591+Source%29+}+posted+by+Faux123+%2C+the+d00+with+the+1.1+overclock+kernel
As for losing your data and not your phone/text. Did you punch in your apn addresses and ports for bell?
Settings-wireless and networks-Mobile networks-add apn
http://forum.xda-developers.com/showthread.php?p=13607746#post13607746
i got this problem fixed by placing in ext sdcard instead of internal memory.
Thank you very much Spuzzum. That was exactly what I needed. Though I must say, going from the stock Bell rom to a modified Alien rom is quite the change. Motorola was nice enough to save my contacts and google my calender events.
Sent from my MB860 using Tapatalk
Edit:
I can't actually seem to differ from what I did and what the instructional video showed, other than loading a different ROM.
I still can't seem to access 2G from my phone though. Not like I need it when I'm in the city, but I'd prefer to use it when I'm out of the city and have to go several days without a charge.
Same problem
hi Guys.. I am having the same problem. I flashed the french SBF now multiple times, rooted, installed Tenfar's recovery and then tried to recover using either the bell 2.2.2 or bell 2.3.4 and both give me error while using recovery. The errror is assert failed , installation aborted. I also had my bootloader unlocked but that didnt help either. Any help will be greatly appreciated.
Bell atrix issues
hey, so when i try to update my phone throws an error saying i dont have "qik.apk" in my system folder. i had this issue before with the random bloat demos the atrix comes packed with, i was able to add the demos to the system folder using su in the terminal and putting the .apk files that i found on the internet into the folder. but for some reason i do not have super user rights anymore (even though the super user app is still installed)
is there any way to fix this so i can update my phone?
Hi,
i just flashed CM7 pre beta 3 after flashing almost every rom in the forum available and not satisfied by the GB ROMs i want to go back to stock froyo.
I have already downloaded Bell Froyo 2.2.2 gobstopper file,
tried to flashed it over CM7 and unable to complete the process
"Process aborted" for some unknown reason.
Can any one guide me to how to go back to stock.
xateeq said:
Hi,
i just flashed CM7 pre beta 3 after flashing almost every rom in the forum available and not satisfied by the GB ROMs i want to go back to stock froyo.
I have already downloaded Bell Froyo 2.2.2 gobstopper file,
tried to flashed it over CM7 and unable to complete the process
"Process aborted" for some unknown reason.
Can any one guide me to how to go back to stock.
Click to expand...
Click to collapse
Use tenfar's unlocked CWM.
Cheers!
Testing rit now, report with results as soon as i get the stock love
Flashed without any problem,
factory reset, wiped cashe
installed unlocked bell zip
after reboot red led shows up and phone reboots.
I think i am stuck in boot loop
Now what to do ?
I have managed to get back to Aura ROM
now will try to go back to stock.
Booting Aura rit now (y it is taking forever to boot )
Finally out of CM7
Now trying to go back to stock
Well, not sure what happened there, you can apply the ihop_bell again to see if that fixes it.
Cheers!
I managed to get back to Aura ROM and tried to flash bell 2.2.2 zip and process aborted i think that zip only works with tenfar's unlocked CWM only that managed to fully flash the rom but stucked with boot loop.
Now going to flash Alien rom (personally Aura removes blot and adds his own crap)
Nop bell stock 2.2.2 is giving error in all 3 recoveries
What to do ?
Have you tried fruitcaking?
iRobby said:
Have you tried fruitcaking?
Click to expand...
Click to collapse
Nop not yet, i want to go back to stock Bell
is it any good ?
Hi,
If you backed up your pds partition, try restoring that. Probably some sbf you tried modified it, changing the signature maybe.
Cheers!
I didn't backed-up any thing (no need of backup)
if u have any then let me have it
Nop dont have any backup, didnt bothered to keep any backup. now i am thinking i was so wrong
Hi,
I just threw that out there, it's the only partition that I don't touch, but sbf files can modify it, since I got my replacement phone I have never used a French/Orange/ATT whatever sbf, so that's probably the difference. My backup is the 2.2.2 Gobstopper really, I also have a pds backup but it's useless for other phones.
Only other idea would be to change the radio first, there are radio only sbfs out there, go for the .15P one for Bell. Once on my previous phone when going from Telstra and French there were issues due to the radio if I recall correctly.
Cheers!
Hello, I am trying to flash NFHimself's Bell 2.2.2 CWM in order to install the recent 2.3.4 OTA which won't install but I keep getting the following error, can anyone help?
assert failed: package_extract_file(''app.bin'', ''/internal/app.bin'')
E:Error in /sdcard/Bell_2.2.2.stock.zip
(Status 7)
Installation Aborted
I've tried this many many times now, anybody know how to get this to work?
I'm desperately trying to get Gingerbread Update,
Thanks, and cheers from Ottawa area!
did you try posting in the actual thread (i haven't looked thus me asking)
make sure you are using Tenfars latest recovery to flash (i believe its the 6/30 update) anything else will lead to errors in my experience.
I cant post in the dev section i only have 2 posts lol... and i am currently trying to intall tenfar's 6/30 having a few complications using fastboot, currently searching on how to install... thanks
Sent from my MB860 using XDA App
have you met the requirements? (bootloader unlocked)
Im trying to do so but i cant seem yo be able to flash anything in fastboot... I can copy well but it wont install anything :/ can you eleborate on what I would need for this to work? Thanks by the way, I believe I've seen you quite often on many other posts
Sent from my MB860 using XDA App
ok so thats where the initial problem lies, you need to be unlocked to use that recovery and then get the gobstopper.
what rom do you currently have on your device?
Just want to understand your current status before directing you.
I have stock bell 2.2.2 but I tried the webtop mod a few weeks ago, obviouly something went wrong and I tried everything to undo. Nothing worked, so next step was waiting for OTA to see if it would overwrite... It downloaded,but keeps getting stuck at the "!" screen with the little android for 3 hours, so reboot.Now I just want to be able to get GB so I go out and find it a stock rom to flash, so I found NFHimself's.
Now that doesnt work so, here I am... :'/
Sent from my MB860 using XDA App
on the ! screen did you touch the right bottom corner of the screen? (opens it up to show you what the error is).
but none the less you need to be on tenfars recovery to flash this and to do that you need to have an unlocked bootloader.
Ok so I unlocked the bootloader, and now I'm trying to flash CWM by entering Android recovery but I'm getting the ! android screen again, they say I need to delete the recovery-install.sh in root explorer and unlock again. So I did, and I still can't get into the recovery to flash CWM... any ideas?
ok forgot to do one step, i just flashed CWM and rebooting, ill keep you posted
Wow, ok, so I got NFHimself's Stock Bell working, I downloaded the OTA, installed it to 70% and
E:Error in /cache/Blur_Version.0.37.23.MB860.BellMobility.en.CA.zip
so I erased cache, rebooted and somehow GB is installed... I happy i just hope everything is going to go ok...
good to hear make sure everything is running ok though if not you may need to try again.
same error
My bootloader is unlocked and I still cant seem to get past this same error. When I try to use fastboot it will just sit on "starting fastboot protocol".
Any help would be appreciated
Thanks
what are you trying to do in fastboot?
Thanks for posting this question...I was looking for the same thing, and you (and the rest of the posters here) cleared my head right up
I have a SGS2 GT-9100M (Bell canada) Used on Telus.
I used the root guide from here http://androidforums.com/galaxy-s2-...lock-root-bell-galaxy-s2-step-step-guide.html step by step.
I then installed both titanium premium and rom manager premium. I tried to back up using rom manager but it gave me the "Failed to verify whole-file signature" error.
For whatever reason, I forgot about the backup and proceeded to attempt to load the 115 daily CM7 build from CWM and got the same error i got when attempting backup. Now this is where I should have stopped.....BUT I then decided to load 115 through the recovery menu, so I had to get the .zip onto the phone by dropping debug mode which worked fine but got me into a boot loop and I didn't reinitialize debug mode
After reading around it said to flash twice and this should fix it. I flashed it over 9000 times (4), but to my dismay it was still stuck in loop.
So I found this Video on the boot loop sticky. http://www.youtube.com/watch?v=tVwiiSStuSQ and attempted to flash the Stock rom from here: http://forum.xda-developers.com/showthread.php?t=1113928
But it hangs about 1/3 of the way through. I unplug it and it says "encountered an error during firmware update, please connect to kies and use the emergency recovery" or something like that. Well ok so that did nothing either, kies cannot help me unless the firmware update failed IN kies.
I'm not an expert at this stuff but I'm also not brand new and know I could have done something stupid here without realizing it.
I CAN get to download mode and flash the stock kernel and the CF kernel to get back CWM recovery mode in blue but the stock bell rom will NOT complete. IF anyone has any clue that will help me figure this out I will be beyond thankful.
ps: I also tried flashing the stable CM7 release but this did not help.
The worst part about this is that I have to use my milestone again. ~_~
Have you tried one of intratechs Frankenstein Roms, it may help.
Any idea where I can find the appropriate one?
Yajirobe said:
Any idea where I can find the appropriate one?
Click to expand...
Click to collapse
Here you`ll see the downloadlink http://forum.xda-developers.com/showthread.php?t=1193695 for Bell
Link http://www.multiupload.com/WHKOJ8A5FG
GOOGLE IS YOUR FRIEND. USE IT AND YOU WILL FIND!
Well that worked! Dude, you rock.
Now I just need to root again. lol
Hello
I have a Korean Model Motorola Atrix 4G, after doing all the pudding process i succesfully unlocked the bootloader, and finally installed CWM as well, after that (the mistake - didn't made NANDROID) , I flashed the ElmasROM CM7 , the ROM boots but there is no IMEI, Baseband etc... actually i did everything from Froyo... now would like to know if the fruitcake process is safe way of getting back IMEI etc, or is there any other method?
(Totally new, but i have explored all the common threads, but everyone updated their thread with just fixed fixed..)
Best
UPDATE:
Ok , so i fixed it , here is the solution if someone else have the same problem and reaches here, be sure i have KOREAN version.
Go here :http://a.hiyouli.com/860/bp.html
and download : N_01.95.00R_asia_retail_21jun2011.zip
Copy it to SD Card or internal storage and FLASH via CWM ...voila...its fixed
ahsansmiles said:
Hello
I have a Korean Model Motorola Atrix 4G, after doing all the pudding process i succesfully unlocked the bootloader, and finally installed CWM as well, after that (the mistake - didn't made NANDROID) , I flashed the ElmasROM CM7 , the ROM boots but there is no IMEI, Baseband etc... actually i did everything from Froyo... now would like to know if the fruitcake process is safe way of getting back IMEI etc, or is there any other method?
(Totally new, but i have explored all the common threads, but everyone updated their thread with just fixed fixed..)
Best
UPDATE:
Ok , so i fixed it , here is the solution if someone else have the same problem and reaches here, be sure i have KOREAN version.
Go here :http://a.hiyouli.com/860/bp.html
and download : N_01.95.00R_asia_retail_21jun2011.zip
Copy it to SD Card or internal storage and FLASH via CWM ...voila...its fixed
Click to expand...
Click to collapse
Thank you so much it works