hello all,
any one can help me with a good step or a good file to install this crap driver (3 hours on 2 computer for nothink)
any help pls,
Best Regards,
Pedroleroi.
Me no understand what a 7CDC is .
jje
I understand!
You need to switch UART and USB settings:
enter UART mode with *#9090# and select "Log via UART"
then
enter *#7284# and select "UART MODEM" and select "USB PDA".
Now Windows ask normal samsung drivers!
That's all.
Thanks a lotttt !!!
Dr_Wolodya said:
I understand!
You need to swith UART and USB settings:
enter UART mode with *#9090# and select "Log via UART"
then
enter *#7284# and select "UART MODEM" and select "USB PDA".
Now Windows ask normal samsung drivers!
That's all.
Click to expand...
Click to collapse
Realy thank you for your support
Thanks ALOOOOOOOTTTTTT
Thank you so very much
Dr_Wolodya said:
I understand!
You need to swith UART and USB settings:
enter UART mode with *#9090# and select "Log via UART"
then
enter *#7284# and select "UART MODEM" and select "USB PDA".
Now Windows ask normal samsung drivers!
That's all.
Click to expand...
Click to collapse
OMG you have sorted my problem with in minutes...thank-you so very much...
I have this problem, but everytime i reboot i have to do this method again. Any ideas on a solution?
reboot with the power button, dont reboot extracting the battery for change the uart mode.
Thanks man
its works
sgs iii i9300
Dr_Wolodya said:
I understand!
You need to swith UART and USB settings:
enter UART mode with *#9090# and select "Log via UART"
then
enter *#7284# and select "UART MODEM" and select "USB PDA".
Now Windows ask normal samsung drivers!
That's all.
Click to expand...
Click to collapse
Thanks Dr_Wolodya, helped a lot! GT-I9100
Dr_Wolodya,
I try to swith UART and USB settings:
with enter *#9090# and *#7284#,
but the device response "MMI code error",
please help!!
wlsuen09 said:
Dr_Wolodya,
I try to swith UART and USB settings:
with enter *#9090# and *#7284#,
but the device response "MMI code error",
please help!!
Click to expand...
Click to collapse
Try restart phone and try again - it work 100% - tested many times.
Or try reflash phone with stock firmware and try again.
7CDCs conection error
chinmayfun said:
Thanks a lotttt !!!
Click to expand...
Click to collapse
Where i need to keyin those code...on phone or pc...?
Pls adviced
norufumi said:
Where i need to keyin those code...on phone or pc...?
Pls adviced
Click to expand...
Click to collapse
In the phone, open dialer and enter the code.
Even though the code did not work for me (Using ICS). I think I should restock the tab.
I have a Tab 2 7.0, and I have the same problem.
My device detects its as 7cds + comneon Suspend and failed to install the drivers.
I've Kies installed but no luck
Switched USB port but result is same
switched PC but same
tried my friend's tab (same like mine) with settings USB->Modem to see weather there is problem with my USB but again no drivers.... i. e. no probs with my tab
Tried Your method but i don't have the "log via UART" instide I have "log via USB" which upon selecting gives me an error ""LOG PATH SET FAIL".
and then on selecting Modem on Diag menu gives me the same responce...
note: I dont have the DM+MODEM+ADB but only modem or PDA option... I guess it said to be "mux menu" for us.. correct me if I am wrong
Please Help me...
It did not work on my Galaxy SIII someone could help me urgently?
Thanks! Saved my life in Galaxy tab 7 GT-P1000 xD
sergioruivace said:
Thanks Dr_Wolodya, helped a lot! GT-I9100
Click to expand...
Click to collapse
When I select "log via USB" I got an error ""LOG PATH SET FAIL".
Anyone can help with this?
zeroarst said:
When I select "log via USB" I got an error ""LOG PATH SET FAIL".
Anyone can help with this?
Click to expand...
Click to collapse
same problem here. and I have to do the 7284 trick everytime i restart the phone
any idea?
pooyab said:
same problem here. and I have to do the 7284 trick everytime i restart the phone
any idea?
Click to expand...
Click to collapse
Reflash with latest firmware and try again or try unlock it by microUART cable.
Related
It is the first time I flashing rom.
when I make my device into bootloader mode(tri-color screen)
the device will become no response and my pc cannot recognizes the device
but when I push the reset hole
the device can reboot and no problem
how to solve it?
I cannot do any unlock or flash procedure!
please help!
My device info.
Softbank X01HT(flashed to HK dopod rom before purchase)
IPL: 1.01
SPL:1.04
Rom version: 1.23.708.4
Rom date: 07/24/06
radio: 1.13.00.00
protool: 32.49.7018.00W
I have installed .NET Framework 2.0
go to activesync, > file > connection settings > and uncheck "allow usb connections" put your phone into bootloader and plug it into your pc... once your done flashing then go back and re-check "allow usb connections"
shogunmark said:
go to activesync, > file > connection settings > and uncheck "allow usb connections" put your phone into bootloader and plug it into your pc... once your done flashing then go back and re-check "allow usb connections"
Click to expand...
Click to collapse
thx for your reply
but the problem is
my pc cannot connect my device during boot mode
my pc said that new hardware found but it cannot be used normally...
is there need any driver?
Penguina said:
thx for your reply
but the problem is
my pc cannot connect my device during boot mode
my pc said that new hardware found but it cannot be used normally...
is there need any driver?
Click to expand...
Click to collapse
when you enter bootloader mode, does it first display Serial then, when you plug in the USB, does it display USB
Olipro said:
when you enter bootloader mode, does it first display Serial then, when you plug in the USB, does it display USB
Click to expand...
Click to collapse
thx for reply
it displays serial
but when I plug in USB cable
nothing change
PS. I have untick 'allow USB connection' in activesync before
Penguina said:
thx for reply
it displays serial
but when I plug in USB cable
nothing change
PS. I have untick 'allow USB connection' in activesync before
Click to expand...
Click to collapse
your bootloader is corrupt, flash Hard-SPL... you're lucky the damn thing boots.
Olipro said:
your bootloader is corrupt, flash Hard-SPL... you're lucky the damn thing boots.
Click to expand...
Click to collapse
o...but when I flash Hard SPL v6, when it turn to tri-color screen
it shows
HERM200
IPL-SSPL by Des
HERM200
SPL-1.09.ds
then the device become no response
later my pc show error 260, miss connection
....
thx all!
I found the reason...
becoz I use activesync 4.1....
when I upgrade to 4.5
I can flash hard spl
Hi Folks, I rooted my GN a few days ago with no problem. Now that I want to flash a Recovery to Install a ROM the computer don't recognize the phone. I have tried a few methods that I saw online with no results.
Looking for some help! Thanks in advance!
On a Windows machine go to Start/Control Panel/Windows Update. With the phone plugged directly to the PC, not a hub and click "check for updates". You might have to do this a few times and reboot, I did.
Odds are you tried this, but just in case....
USB Driver Not Being Recognized For SYNC
Following are my observations and possible steps to
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA. If it already selected to PDA, reselect it by select MODEM and then PDA again.. Only change the USB setting.. and then press back. try reconnect.
6. The Laptop will start recognizing the required drivers and install them
also Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
aj_vogtman said:
On a Windows machine go to Start/Control Panel/Windows Update. With the phone plugged directly to the PC, not a hub and click "check for updates". You might have to do this a few times and reboot, I did.
Click to expand...
Click to collapse
aj, Im installing some updates now and I will tell u then the results!
Sent from my SAMSUNG-SGH-I717 using xda premium
enjoythemusic said:
Odds are you tried this, but just in case....
USB Driver Not Being Recognized For SYNC
Following are my observations and possible steps to
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA. If it already selected to PDA, reselect it by select MODEM and then PDA again.. Only change the USB setting.. and then press back. try reconnect.
6. The Laptop will start recognizing the required drivers and install them
also Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Click to expand...
Click to collapse
enjoythemusic, also I had tried this before and doesnt work for me. Thanks for your help. Im installing some updates now and will see if work if not will do this again over the updates!
Sent from my SAMSUNG-SGH-I717 using xda premium
I rooted the stock GB yesterday then flashed DAGr8's ICS rom with a ton of mods afterwards and mine is functioning fine.
I did notice a Samsung driver available as an optional install in Windows Updates. Is that the one you tried to install?
Hi!
Does anybody know how to enter Diagnostic Mode with xperia z2 d6503?
##3424 and ##3424# do not seem to work. On my s5, it was *#0808#. tried it but did not work.
Is there an alternative to change the usb settings? (Like thru cmd)
Thanks
What do you mean diagnostic mode
Could you explain as i am not familiar?
There is sort of usb connection mode in settings>connectivity
Envious_Data said:
What do you mean diagnostic mode
Could you explain as i am not familiar?
There is sort of usb connection mode in settings>connectivity
Click to expand...
Click to collapse
Hi!
No, not the connectivity option in Settings.
Diagnostic mode or USB Settings mode is to help put the phone go to modem so that the radio can be examined and used with Qualcomm EXtensible Diagnostic Monitor (QXDM)
coami said:
Hi!
No, not the connectivity option in Settings.
Diagnostic mode or USB Settings mode is to help put the phone go to modem so that the radio can be examined and used with Qualcomm EXtensible Diagnostic Monitor (QXDM)
Click to expand...
Click to collapse
I dont think Xperia Z2 has that
You can reboot into fastboot mode, fastboot mode
And anything utilitorial aside those two would be android debugging mode.
How do I enter Debugging Mode?
Envious_Data said:
I dont think Xperia Z2 has that
You can reboot into fastboot mode, fastboot mode
And anything utilitorial aside those two would be android debugging mode.
Click to expand...
Click to collapse
I just translated "debugging mode" and no that is not it anyway.
What I wish is for the phone to appear under ports and com so that I might use the software QXDM.
Thanks anyway
coami said:
I just translated "debugging mode" and no that is not it anyway.
What I wish is for the phone to appear under ports and com so that I might use the software QXDM.
Thanks anyway
Click to expand...
Click to collapse
Did you manage to get this working? I am trying to do the same with Z5 E6553, just cant see the COM and MODEM ports to connect to QXDM
shehraz1983 said:
Did you manage to get this working? I am trying to do the same with Z5 E6553, just cant see the COM and MODEM ports to connect to QXDM
Click to expand...
Click to collapse
I think this thread is related to what you want but not sure. Read the first post:
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
olokos said:
...
3. Open the caller app and type in *#*#8778#*#* (it should go off the screen after you type in the last symbol "*"
...
5. Open ADB console
6. Type in these commands:
Code:
adb shell
su
setprop persist.usb.eng 1
Click to expand...
Click to collapse
I think this might be what you're looking for
Sometimes the command is
su
setprop sys.usb.config diag,adb
Sent from my R7plusf using XDA-Developers mobile app
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
total7kaos said:
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
Click to expand...
Click to collapse
Try running odin from that screen
Sent from my God Mode 8
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
I did and it forced it and now works great. Thanks!
What is a god mode 8??
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
Lol, its my Rooted Note 8 (galaxy note 8 - god mode 8) just a play on words.
Sent from my God Mode 8
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
I could not. I have the same problem and I hate odin in setuppconnection. how did you do it?
Thanks
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
AaronCompNetSys said:
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
Click to expand...
Click to collapse
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
osk4rin said:
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
Click to expand...
Click to collapse
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
AaronCompNetSys said:
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
Click to expand...
Click to collapse
I fixed the problem. I reinstall the drivers and flash the stock firmware from the error screen.
Thank you!
i am also here, can anyone help me pls
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
Uhm.. Did you read what @louforgiveno said? He gave the answer right at the top of the thread.. Just run odin in the warning screen window It'll still go!!
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Django64 said:
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Click to expand...
Click to collapse
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Samsung J7 pro
louforgiveno said:
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi now I am getting Re-Partition operation failed
Django64 said:
Hi now I am getting Re-Partition operation failed
Click to expand...
Click to collapse
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
odin failed for J7pro
louforgiveno said:
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Django64 said:
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Click to expand...
Click to collapse
So the first thing i notice....if you look under "FAIL" (red box) it shows your com port as 16.....this com number should be changed to a single digit number 1-9 (preferably 1,2,3,4 or 5).
Google "change COM port assignment" for details with pics.
Sent from my God Mode 8
Oh yeah and duh!! I forgot another thing to try ...
Remove the (.md5) from the name of the odin files so they end with (.tar).
Hopefully one of the two "tricks" will work for you
Sent from my God Mode 8
Ok,here is what i tried:
*Different ports and usb cables
*Hard Reset
*Update to newest firware available
*Different PCs
*Uninstalling and Installing HiSuite again and again
I cant get my phone to connect to any PC.It wont give me the USB mode selection option.And even when i change it from Developer options doesnt do anything.
I am out of ideas,any help would be much appreciated.
joker7gr said:
Ok,here is what i tried:
*Different ports and usb cables
*Hard Reset
*Update to newest firware available
*Different PCs
*Uninstalling and Installing HiSuite again and again
I cant get my phone to connect to any PC.It wont give me the USB mode selection option.And even when i change it from Developer options doesnt do anything.
I am out of ideas,any help would be much appreciated.
Click to expand...
Click to collapse
Windows? Version?
Maybe this can help https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
Or this https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Presuming windows PC
Hello and thanks for your reply
I am using Win 10
I have done the registry key trick,no luck.
I also tried the program of the second link.Reboot the phone in fastboot mode and still nothing.
joker7gr said:
Hello and thanks for your reply
I am using Win 10
I have done the registry key trick,no luck.
I also tried the program of the second link.Reboot the phone in fastboot mode and still nothing.
Click to expand...
Click to collapse
And what about Frp locked or unlocked in fastboot screen and/or OEM unlocking in developer options?
Thats what i get when i go to fastboot mode
OEM unlocking in developer options is enabled.
joker7gr said:
Thats what i get when i go to fastboot mode
OEM unlocking in developer options is enabled.
Click to expand...
Click to collapse
All good, but here's where I'm out of ideas. Hopefully somebody else sees your post and helps you further...
lvbaal said:
All good, but here's where I'm out of ideas. Hopefully somebody else sees your post and helps you further...
Click to expand...
Click to collapse
Thanks for trying
this is long shot but try to plug it in comp and while pluged in force restart mob by long pressing power button. saw this method in other thread with usb sound issues
Tried it, unfortunately didn't work.
Still no solution?
I'm facing this issue too. Desperately looking for a solution. :crying:
this worked for me. reset to default settings in dev options.
then re-enable dev options by tapping build #
then re-enable debug mode