Hi guys,
I'm currently running the Bell stock 2.3.3 ROM, I was wondering if there are any vanilla 2.3.4 ROM's for UGKG2 without the bloatware added by Bell/Samsung?
Thanks for your help.
yqed said:
Hi guys,
I'm currently running the Bell stock 2.3.3 ROM, I was wondering if there are any vanilla 2.3.4 ROM's for UGKG2 without the bloatware added by Bell/Samsung?
Thanks for your help.
Click to expand...
Click to collapse
none that i know of sorry.
Get rooted and cwm recovery get a backup and you can delete the bloat yourself (delete the apk's from system/app) can always restore if you delete the wrong thing. theres a good list of apps you can delete somewere round here have a search in the SGS2 forum.
Or buy titanium backup from the market and freeze them (still gotta be rooted tho).
Never mind, I used the XXKG3 2.3.4 generic ROM to flash my Bell I9100, it was easy as pie.
Password: samfirmware.com
1) Odin setup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Result:
2) Do a factory reset: *2767*3855#
No need to root the phone or install CWM. As I said, can't get easier than this.
yqed said:
Never mind, I used the XXKG3 2.3.4 generic ROM to flash my Bell I9100, it was easy as pie.
Password: samfirmware.com
1) Odin setup:
Result:
2) Do a factory reset: *2767*3855#
No need to root the phone or install CWM. As I said, can't get easier than this.
Click to expand...
Click to collapse
Glad you got it sorted, altho if you dont know the advantages/fun of being rooted its defo something to read about.
If you flashed a generic rom i'm guessing there is still all the samsung apps aka Hubs and other crap still on your phone. these things drain battery there the bloat you speak off. the only other way to rid them is root.
Ya, I'm about to root the phone and remove all that crap.
At least none of Bell apps are installed...
Apps safe to be removed.
yqed said:
Never mind, I used the XXKG3 2.3.4 generic ROM to flash my Bell I9100, it was easy as pie.
Password: samfirmware.com
1) Odin setup:
Result:
2) Do a factory reset: *2767*3855#
No need to root the phone or install CWM. As I said, can't get easier than this.
Click to expand...
Click to collapse
Bit of a newbie here, but im assuming XXKG3 file you linked contains all files needed? (modem/csc etc in one file?)
Also is this official or one of the leaked?
bimmerboii said:
Bit of a newbie here, but im assuming XXKG3 file you linked contains all files needed? (modem/csc etc in one file?)
Also is this official or one of the leaked?
Click to expand...
Click to collapse
Ya, that is the official Samsung package posted by samfirmware.com site and contains all needed files. I just saved you the trouble to register there but you should check their site also.
Awesome! I had already planned in flashing generic uk firmware on my Bell SGS2 (seems UK gets updates first right?) and you made it easier
Edit: How is the GPS on this firmware? Flashing this uk firmware also changes the GPS servers right?
Also, I read somewhere that when you flash a firmware from a different region, you need to manually change the CSC code? i.e. It should say XEU for UK generic?
Check here http://samsunggalaxysforums.com/showthread.php/4692-Full-Guide-How-to-Debrand-your-Samsung-Galaxy-S2 (Step 8)
I don't know why you look at other sites when XDA has always the proper info and all real devs hang here. I never saw someone from XDA copying procedures from other sites and paste them here.
About your question, all I did was described on the post with screenshots, I did not do anything else extra and everything (including my GPS) works as it should. I thought I would see an improvement on the GPS signal with the 2.3.4, is the same old crap... takes forever to wakes up (if you have your wireless network disabled, of course).
Word of warning, be very careful when using .pit file and repartitioning. It's not something that's needed 99.9% of the time that you flash a firmware but increases the risk for FUBARRING the device if something goes wrong.
I agree with Intratech 100%, however I did it with XXKG3 and nothing went wrong because the Bell partition is identical to generic XXKG3 one. I actually got a nice talk with Intratech about that, just to clear the partitioning questions for others.
Oh yeah, you'll probably find the download link for firmwares including XXKH3 much faster for downloading from the firmware thread in the dev forum. XWKH4 which is newer that XXKH3 has also been released.
yqed said:
I don't know why you look at other sites when XDA has always the proper info and all real devs hang here. I never saw someone from XDA copying procedures from other sites and paste them here.
Click to expand...
Click to collapse
Well I couldnt find any info on debranding the SGS2 and that site came up first
Intratech said:
Word of warning, be very careful when using .pit file and repartitioning. It's not something that's needed 99.9% of the time that you flash a firmware but increases the risk for FUBARRING the device if something goes wrong.
Click to expand...
Click to collapse
Thank you and noted!
yqed said:
I agree with Intratech 100%, however I did it with XXKG3 and nothing went wrong because the Bell partition is identical to generic XXKG3 one. I actually got a nice talk with Intratech about that, just to clear the partitioning questions for others.
Click to expand...
Click to collapse
Thanks that's a good explanation!
Just so you know, I redid the *#272*{IMEI}# sequence on my XXKG3 phone and it shows KOR as it did with original Bell firmware.
Can you try it on your phone and see if it says KOR also? I presume you have a stock unchanged phone... Either ways I'm keeping the KOR setting because I want to get generic updates only.
yqed said:
Just so you know, I redid the *#272*{IMEI}# sequence on my XXKG3 phone and it shows KOR as it did with original Bell firmware.
Can you try it on your phone and see if it says KOR also?
Click to expand...
Click to collapse
KOR is the default CSC when it doesn't find/install the proper CSC for your region. For the Bell firmware the CSC should show as BMC
yqed said:
Just so you know, I redid the *#272*{IMEI}# sequence on my XXKG3 phone and it shows KOR as it did with original Bell firmware.
Can you try it on your phone and see if it says KOR also? I presume you have a stock unchanged phone...
Click to expand...
Click to collapse
Yup still running stock (but rooted). Mine says VMC. Got the phone from Virgin Mobile but is 100% same as Bell with Bell bloatware on it
Edit: The menu gives me 4 choices. VMC, SOL, BWA, BMC. VMC is the one highlighted
Intratech said:
KOR is the default CSC when it doesn't find/install the proper CSC for your region. For the Bell firmware the CSC should show as BMC
Click to expand...
Click to collapse
Whoa, I never knew this Intra. I was 100% sure the KOR value will work anywhere. Does it hurt if I leave it on KOR? Edit: I don't even have these codes into firmware...
bimmerboii said:
Yup still running stock (but rooted). Mine says VMC. Got the phone from Virgin Mobile but is 100% same as Bell with Bell bloatware on it
Edit: The menu gives me 4 choices. VMC, SOL, BWA, BMC. VMC is the one highlighted
Click to expand...
Click to collapse
Yes VMC is Virgin Mobile Canada so that's normal. SOL and BWA must be other carriers or regions.
yqed said:
Whoa, I never knew this Intra. I was 100% sure the KOR value will work anywhere. Does it hurt if I leave it on KOR?
Click to expand...
Click to collapse
As long as the device works it not vital to change it but some people like to. If you change it the device will do a factory reset.
Intratech said:
As long as the device works it not vital to change it but some people like to. If you change it the device will do a factory reset.
Click to expand...
Click to collapse
I thought so, I'll stick with KOR for now.
Edit: I bought the phone from FutureShop, not from Bell. I swear that I saw KOR when I checked the CSC on my phone originally... I think I was smoking some new stash.
Related
Please help as I am extremely confused.
I have a new SG2. I did not root it.
Every time I restart my phone I see an Yellow Triangle with exclamation mark.
Now, as I understand, everyone who gets the triangle has rooted the phone.
Is there something wrong with my SG2?
Kies shows this info:
PDA: KF1
Phone: KE7
CSC: KF1 (XSG)
Thanks.
kgoel13 said:
Please help as I am extremely confused.
I have a new SG2. I did not root it.
Every time I restart my phone I see an Yellow Triangle with exclamation mark.
Now, as I understand, everyone who gets the triangle has rooted the phone.
Is there something wrong with my SG2?
Kies shows this info:
PDA: KF1
Phone: KE7
CSC: KF1 (XSG)
Thanks.
Click to expand...
Click to collapse
Does your phone boot? If it boots up, the yellow exclamation point is just when you flash a non signed ROM from Odin. If it doesn't boot and stays at the yellow exclamation, something might be wrong and you need to factory reset to try and fix it...
kgoel13 said:
Please help as I am extremely confused.
I have a new SG2. I did not root it.
Every time I restart my phone I see an Yellow Triangle with exclamation mark.
Now, as I understand, everyone who gets the triangle has rooted the phone.
Is there something wrong with my SG2?
Kies shows this info:
PDA: KF1
Phone: KE7
CSC: KF1 (XSG)
Thanks.
Click to expand...
Click to collapse
Did you pay to get it unlocked? If you did... I'd speak with them first, they probably rooted your phone and ran the Helroz unlock version. Then get your money back.
cue_32 said:
Did you pay to get it unlocked? If you did... I'd speak with them first, they probably rooted your phone and ran the Helroz unlock version. Then get your money back.
Click to expand...
Click to collapse
Or send them a lawyers letter asking for £500, because they have invalidated your warranty by rooting the phone without your consent.
Sent from my GT-I9100 using XDA Premium App
My phone boots normal, I have restarted my phone several times now.
I did not pay to get it unlocked. However, it is possible that the handsets sold here (in Qatar) are unlocked. How do I confirm this. As far as I understand I still have warranty.
Anyway, coming back to the original question, is this good or bad (not considering the warranty factor).
kgoel13 said:
My phone boots normal, I have restarted my phone several times now.
I did not pay to get it unlocked. However, it is possible that the handsets sold here (in Qatar) are unlocked. How do I confirm this. As far as I understand I still have warranty.
Anyway, coming back to the original question, is this good or bad (not considering the warranty factor).
Click to expand...
Click to collapse
I'm pretty sure that when Samsung has not locked the bootloader flashing a custom rom won't affect the warranty. It may depend on the system of your country though. Here in Finland it does not affect the warranty, or at least did not affect on my previous phones.
kgoel13 said:
Anyway, coming back to the original question, is this good or bad (not considering the warranty factor).
Click to expand...
Click to collapse
Apart from esthetics and the void warranty, it really doesn't matter at all.
It has no "technical effect", it only tells that a non-Samy-signed kernel had been flashed.
Also, there is a list of ways to get rid of it again:
- USB jig
- flash a stock Samsung kernel again via an PC app called "Odin"
Indeed, USB jig works fine and erase download information.
With the jig : current binary is a Samsung official one and custom binary download is set to no.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.tmaddict.com/forum/viewtopic.php?p=247028#p247028
Pume said:
I'm pretty sure that when Samsung has not locked the bootloader flashing a custom rom won't affect the warranty. It may depend on the system of your country though. Here in Finland it does not affect the warranty, or at least did not affect on my previous phones.
Click to expand...
Click to collapse
Ok. I am a pure newbie with this. I am still searching for some explanation on 'kernel' and 'ROM'. I will be most grateful if you could point me to the right direction:
Is my phone rooted?
If no, then I need to root via ODIN and 'flash an insecure kernel' and then use SuperOne Click. This is required to 'flash a custom ROM'
If yes, then I just need to 'flash a custom ROM'.
I have read and re-read the guides posted on rooting/flashing but maybe I am missing something. Can I use any 'insecure kernel' or custom ROM?
Thanks a lot again.
Root is not required to flash a custom rom. The custom roms install kernels that are rooted themselves.
First off, there is no "need" to flash a custom ROM, everything works fine on a stock ROM, even rooting.
The "kernel" the lowest, innermost "core" of the OS, it's the part started at boot and taking care of the rest of the OS to boot up.
Also, by now, you don't need the SuperOneClick route anymore, there's more easy/faster ways by now with kernels that already bring and do everything you need.
You might want to take a look at CF-Root or maybe even my own kernel I just fished
Those take care of everything needed for getting root access, besides flashing the kernel via Odin, nothing more needs to be done.
Thanks a lot!! That was really helpful.
Am I wrong in assuming that a custom ROM would take care of the battery drain issue? or just using a kernel (such as yours) would do the trick. I only wanted to change the kernel/ROM for battery.
Also I looked at your kernel.
Download a build of my kernel that matches your FW/current kernel version und unpack the downloaded archive.
You will get a .tar file. Don't extract that, you need this .tar.
(go to Settings -> About this phone -> look at "Kernel Version", this will tell you what kernel build you need)
My Kernel Version is : 2.6.35.7-I9100JPKF1-CL277308 [email protected]#2
so what build do I need?
Thanks again.
kgoel13 said:
Thanks a lot!! That was really helpful.
Am I wrong in assuming that a custom ROM would take care of the battery drain issue? or just using a kernel (such as yours) would do the trick. I only wanted to change the kernel/ROM for battery.
NO a custom rom may help but it may not .
User apps biggest battery drain .
My Kernel Version is : 2.6.35.7-I9100JPKF1-CL277308 [email protected]#2
so what build do I need?
KF1
jje
Click to expand...
Click to collapse
@HellcatDroid,
So I need a KF1 build but you only have KE7 and KG2.
kgoel13 said:
@HellcatDroid,
So I need a KF1 build but you only have KE7 and KG2.
Click to expand...
Click to collapse
AS THE MAN SAYS.
The kernels are compiled pretty universal, so the KE7 one should work on most 2.3.3 based FWs and the KG2 one on most 2.3.4 ones.
jje
Got it. Thanks.
Although I decided not to flash Kernel/ROM as I could not find any strong evidence yet on reduction on battery drain after flashing. So beats the purpose, I guess. Will keep looking for the evidence though!!!
Thanks everyone.
kgoel13 said:
@HellcatDroid,
So I need a KF1 build but you only have KE7 and KG2.
Click to expand...
Click to collapse
I can make an explicit KF1 build, no problem
Will do so tonight as I'm also going to make a KG3 one.
kgoel13 said:
Although I decided not to flash Kernel/ROM as I could not find any strong evidence yet on reduction on battery drain after flashing.
Click to expand...
Click to collapse
The kernel will indeed very likely not affect battery drain.
The ROM however could. There's a lot of people saying on the 2.3.4 based FWs (XXKG1/2/3) the battery lasts longer.
Though, there is no "bulletprove prove" of that yet.
HellcatDroid said:
I can make an explicit KF1 build, no problem
Will do so tonight as I'm also going to make a KG3 one.
Click to expand...
Click to collapse
Thanks. Although, I still haven't figured out why does one need to flash a new kernel? I understand it would make sense for developers such as you for more control etc. but for an average user does it give more visible benefits?
HellcatDroid said:
The kernel will indeed very likely not affect battery drain.
The ROM however could. There's a lot of people saying on the 2.3.4 based FWs (XXKG1/2/3) the battery lasts longer.
Though, there is no "bulletprove prove" of that yet.
Click to expand...
Click to collapse
I am gonna stick with juice defender for now instead of a new ROM and wait for a definite solution either from Samsung or developers.
kgoel13 said:
Thanks. Although, I still haven't figured out why does one need to flash a new kernel? I understand it would make sense for developers such as you for more control etc. but for an average user does it give more visible benefits?
Click to expand...
Click to collapse
Depends on the kernel, what's put in.
CF-Root as well the one I am working on myself for example take care of everything that's needed for rooting after being flashed, no additional actions by the user needed.
It also comes with some more options for customisation, like bootscripts, custom bootanimation, sound and logo.
Ok. Will wait for the KF1 you are making and try it. Would you also suggest a custom ROM.
[Q] Galaxy SII with UGKG2 baseband - going "back" to a different stock firmware
Hi guys,
Now I've just got a Galaxy SII from Bell (and unlocked it), and the baseband is UGKG2. I've seen the discussion and well understand there is no stock firmware available at the time, so if I flash it, there's no way back for the original one (until posted by Samsung).
Here's my question - can I securely flash a different, but STOCK firmware to this model? What I actually need is to install a stock Russian firmware, so that Russian is available as the interface language. If so, which flavour should I use? There is a bunch of official Russian firmwares (e.g. I9100XEKE1, I9100XWKE2, I9100XWKF1, I9100XXKG1, I9100XWKF3), but which of these should I reasonably expect to be compatible with UGKG2?
Thanks a lot for help.
They should all be compatible, as far as i know the bell gs2 is identical to the ones sold in europe. The radio is even the same, since the ones sold in europe also work with 3g in north america, so you should be good to go. Id just figure out whatever is the newest russian firmware and flash it, also check if its carrier or not, since I'm sure you wouldn't want some russian carrier bloat on it or something.
If you want the newest rom possible, id recommend the XXKG3, its not russian, but its the 2.3.4. Im running it on my bell sgs2, works great. and its generic.
Also I'm pretty sure the generic european firmwares all feature russian as a language, so you wouldn't specifically need to flash a russian rom id think.
good luck.
Edit* just checked my XXKG3, and it has russian listed as a language.
unleashed12 said:
If you want the newest rom possible, id recommend the XXKG3, its not russian, but its the 2.3.4.
just checked my XXKG3, and it has russian listed as a language.
Click to expand...
Click to collapse
Thanks a lot for the reply. So you say I can go for 2.3.4 too and shouldn't necessarily stick with 2.3.3? Sorry, I am new to this stuff.
Could you give a link to XXKG3, I'd love to try that one out.
nornore said:
Thanks a lot for the reply. So you say I can go for 2.3.4 too and shouldn't necessarily with 2.3.3? Sorry, I am new to this stuff.
Could you give a link to XXKG3, I'd love to try that one out.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1182434 theres the link to the XXKG3 fw... Well its up to you what you want to flash they will all work, but the XXKG3 is the newest one there is (2.3.4), and its also the one I'm running, so i know it works great for me, can't really say what version/ how old the russian ones would be.
unleashed12 said:
http://forum.xda-developers.com/showthread.php?t=1182434 theres the link to the XXKG3 fw... Well its up to you what you want to flash they will all work, but the XXKG3 is the newest one there is (2.3.4), and its also the one I'm running, so i know it works great for me, can't really say what version/ how old the russian ones would be.
Click to expand...
Click to collapse
I just had a look through that thread, lots of guys have problems with flash in browsing, but it's not apparent what their original firmware was... Did you too have UGKG2 before you flashed XXKG3? They also say something about "Frankenstein", is that the one I get via the link you gave earlier? Yeah, and they mention repartition - did you do that too?
Yeah, i have it flashed and i went from the bell rom to it, i did check repartition since it ensures that you will not have any problems as its a complete clean flash. And yes I'm aware of the flash issue, i hate flash for personal reasons ( on a mobile device, as it leads to general lagyness and drains battery) and i always turn it off on any android phone I've used, so i could care less about the flash bug but it might be a deal breaker for some i understand.
as far as the link, the first link given in the main post, thats the actual rom, the stock rom no frankenstien or anything. I didn't flash frankenstien just the original rom.
unleashed12 said:
Yeah, i have it flashed and i went from the bell rom to it, i did check repartition since it ensures that you will not have any problems as its a complete clean flash. And yes I'm aware of the flash issue, i hate flash for personal reasons and i always turn it off on any android phone I've used, so i could care less about the flash bug but it might be a deal breaker for some i understand.
as far as the link, the first link given in the main post, thats the actual rom, the stock rom no frankenstien or anything. I didn't flash frankenstien just the original rom.
Click to expand...
Click to collapse
Great. Things get a bit clearer. But doesn't YouTube work on Flash (sorry if that's a stupid question)? 'Cause the end user of my firmware-changing exploits will likely spend a lot of time on YouTube.
Yeah, and is your model I9100 or I9100M? Mine has got an M to it.
nornore said:
Great. Things get a bit clearer. But doesn't YouTube work on Flash (sorry if that's a stupid question)? 'Cause the end user of my firmware-changing exploits will likely spend a lot of time on YouTube.
Yeah, and is your model I9100 or I9100M? Mine has got an M to it.
Click to expand...
Click to collapse
Uhm, the issue is only present in the browser to my knowledge it occurs when you press on some flash banner or something, the flash still works in the youtube app.
Mine was the bell phone, i9100m, the i9100 and i9100m are identical, i suppose bell just added an m to their variant to feel special or something. Makes no diff.
unleashed12 said:
the flash still works in the youtube app.
Click to expand...
Click to collapse
Cool. So I guess I'll actually try it - with repartition checked (it makes sense), although all over the net they advise in huge capitals to uncheck it.
unleashed12 said:
i9100 and i9100m are identical, i suppose bell just added an m to their variant to feel special or something. Makes no diff.
Click to expand...
Click to collapse
Buggers Always up for confusing people Thanks.
nornore said:
Cool. So I guess I'll actually try it - with repartition checked (it makes sense), although all over the net they advise in huge capitals to uncheck it.
Buggers Always up for confusing people Thanks.
Click to expand...
Click to collapse
haha really? i read later on in the thread with guys who checked repartition had suspected they had better battery life, i must not have noted the huge capital thing, i always thought a total clean flash would be better. Anyways I've flashed that thing twice with repartition checked, and my phone didn't blow up or anything haha. it should be noted that if u check reparation, you have to load the pit file too (obviously)
Yeah, stupid bell, the original galaxy s was also called i9000m.
unleashed12 said:
Yeah, stupid bell, the original galaxy s was also called i9000m.
Click to expand...
Click to collapse
Hoo, really? Well... whatever...
I've browsed through a couple of dozens instructions on flashing today, and most of the time they specifically told people to uncheck the repart. box in Odin. But as XXKG3 comes with a pit file (I understand it does), it makes total sense.
Great, thanks a lot. I'll try and flash this thing and get back with results.
nornore said:
Hoo, really? Well... whatever...
I've browsed through a couple of dozens instructions on flashing today, and most of the time they specifically told people to uncheck the repart. box in Odin. But as XXKG3 comes with a pit file (I understand it does), it makes total sense.
Great, thanks a lot. I'll try and flash this thing and get back with results.
Click to expand...
Click to collapse
Yeah, good luck. Be comfortable with odin before you attempt it though, watch some youtube videos and such as odin can be dangerous if not used correctly. But its simple, the rom comes with 4 files or so and u gotta load them in the correct boxes, pit , phone,csc and pda .
unleashed12 said:
Yeah, good luck. Be comfortable with odin before you attempt it though
Click to expand...
Click to collapse
Yeah, sure! I'm going to re-read all the stuff before I do it anyway.
One last thing - did you have to root your phone to do this flash, or is it supposed to through without rooting first?
nornore said:
Yeah, sure! I'm going to re-read all the stuff before I do it anyway.
One last thing - did you have to root your phone to do this flash, or is it supposed to through without rooting first?
Click to expand...
Click to collapse
You don't need root or anything, as your phone hasn't even booted yet when its in downloading mode lol, its in boot loader mode. Root not required at all for odin roms, only CWM requires it.
unleashed12 said:
You don't need root or anything, as your phone hasn't even booted yet when its in downloading mode lol, its in boot loader mode. Root not required at all for odin roms, only CWM requires it.
Click to expand...
Click to collapse
Hey, it worked! Lots of interface languages and, surprise, surprise, NO LETTER "M" in the name of the device any longer Still doesn't play MTS files (videos I shot with a Canon camera that writes in AVCHD format), though, but it is remedied through to buying DICE player.
Thanks a lot, now THIS is what I was looking for! Eat it, Bell
unleashed12 said:
You don't need root or anything, as your phone hasn't even booted yet when its in downloading mode lol, its in boot loader mode. Root not required at all for odin roms, only CWM requires it.
Click to expand...
Click to collapse
So all I have to do is flash the phone with XXKG3 ROM in Download mode?
Did you do a complete wipeout before?
yqed said:
So all I have to do is flash the phone with XXKG3 ROM in Download mode?
Did you do a complete wipeout before?
Click to expand...
Click to collapse
No, I did not do a wipeout first, I just prepared Odin and the ROM files, and then pressed the three buttons on the phone. And it worked.
Hi,
I just purchased the i9100 from someone today and I'm pretty sure that it's rooted. I checked the kernal and it is (2.6.35.7-RAGEmod-U1-v1.1b).
Can anyone please point me in the right direction? Also which files would I need? Do I need to use a USB jig?
I have no idea what I'm doing, there is someone on kijiji (local selling/buying site) that says they will flash it back for me for $100, should I just do that?
Thanks everyone!
not sure what you would do, but what i am CERTAIN about is do not pay 100 bucks... just go to the dev section and read up there.. factory reset (turn phone off, hold volume up, power and home keys simultaneously)
Sorry I wasn't being more specific, but what I wanted to do is unroot the phone. When my phone powers on I get a GR check rom boot logo?
My phone seems to be missing a lot of default apps compared to my brothers SGS2.
well theres this program called s-root which can on click unroot your phone. not sure if you need a specific kernel though. ask around in this forum - http://forum.xda-developers.com/showthread.php?t=1125414
kar111 said:
well theres this program called s-root which can on click unroot your phone. not sure if you need a specific kernel though. ask around in this forum - http://forum.xda-developers.com/showthread.php?t=1125414
Click to expand...
Click to collapse
Thanks, I'll look into this!
glad i could help
kodath said:
Sorry I wasn't being more specific, but what I wanted to do is unroot the phone. When my phone powers on I get a GR check rom boot logo?
My phone seems to be missing a lot of default apps compared to my brothers SGS2.
Click to expand...
Click to collapse
Just unrooting the phone should work with SuperOneClick (download to your PC, enable USB debugging on the phone, connect it to the PC and click on the big "unroot" button. If you are running some custom ROM you want to here rid of you will have to flash complete new clean software from Samsung.
But to the missing features: you said you have an older Galaxy S1, oder course there are other (better) apps and a totally new software on the successor, the SGS2.
Arjoma said:
Just unrooting the phone should work with SuperOneClick (download to your PC, enable USB debugging on the phone, connect it to the PC and click on the big "unroot" button. If you are running some custom ROM you want to here rid of you will have to flash complete new clean software from Samsung.
But to the missing features: you said you have an older Galaxy S1, oder course there are other (better) apps and a totally new software on the successor, the SGS2.
Click to expand...
Click to collapse
My bad again, I also have a Samsung Galaxy S2 (forgot to add the 2 there )
How do I know if my ROM is custom or not? Under about phone, it shows this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks again everyone!
Yes that's a custom rom, checkrom v5, go to the stock rom thread, pick an upto date rom, ki8 is the newest.
Flash using odin, guide is also in the thread.
That's the only way to remove a custom rom and kernel and restore the removed apps.
Edit: this is the thread. http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using xda premium
You are on a custom rom or a modified stock rom for shure. If you want to get back to stock then you have a thread in the development section that hosts all the stock roms or are links to them at least. Flashing a stock rom will also unroot you phone.
Now as for the flashing part you need to read the stickies search for a youtube video before you do it. You need to understand that flashing has its risks. Although I flashed my phones at least 50 times and never bricked any of them so far you still need to be warned. Its not complicated at all but you need to understand the basic steps. Good luck.
Sent from my GT-I9100 using xda premium
veyka said:
Yes that's a custom rom, checkrom v5, go to the stock rom thread, pick an upto date rom, ki8 is the newest.
Flash using odin, guide is also in the thread.
That's the only way to remove a custom rom and kernel and restore the removed apps.
Edit: this is the thread. http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Robi-K said:
You are on a custom rom or a modified stock rom for shure. If you want to get back to stock then you have a thread in the development section that hosts all the stock roms or are links to them at least. Flashing a stock rom will also unroot you phone.
Now as for the flashing part you need to read the stickies search for a youtube video before you do it. You need to understand that flashing has its risks. Although I flashed my phones at least 50 times and never bricked any of them so far you still need to be warned. Its not complicated at all but you need to understand the basic steps. Good luck.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks to the both of you! I will try this now!
Everything worked out! Thanks again everyone!
Hi guys, as you can (or cannot) see, I'm a new guy here. Not just here at xda, but I'm pretty much a newbie to android as well. I've gotten a S2 last summer from a friend in Asia to replace my ancient Nokia and it was rooted when I got it through snail mail. I've just rolled with it until now when I realized that the phone could probably do better if I did some upgrading and tweaking here and there after seeing articles about Cyanogenmod and other stuff that came from rooting the phone. From there comes my problem, I'm totally clueless about android. I only know that my phone is rooted since it has superuser, but I have no idea what kind of kernel/ROM it has on it and how I can go about improving it. I'm still stuck on version 2.3.3 because I have no idea on how to upgrade and didn't want to carelessly fiddle with it and break it. So I'm hoping you guys could give me some pointers on what I have as of right now, and what to do in regards to getting things up to date.
The specs (?) of my phone are:
Model: GT-I9100
Android version: 2.3.3
Baseband ver: I9100XXKE4
Kernel version: [email protected] #2
Build number: QUENS.ROOT.FIT.ZSKE7
I don't think my phone is attached to any carrier either, if that's normal for the international version.
PS: I apologize if my question and crappy explanation angers some fine and outstanding gentlemen here, but I'm afraid I cannot help that because of my utter confusion and cluelessness.
AW: [Q] Confusion about rooted GT-I9100
So the first question you have to ask yourself is: Do you want to stay on stock (but rooted) or do you want an custom rom.
You can try to connect you phone per USB to your computer, then run Kies there and look if it shows you an available update. If the phone is from china you can have the Sammy JellyBean 4.1.2 update. If Kies does not show you an available update then the reason is your rooted stockrom. You have then to "call" (It doesn't call anybody but you have to enter it in the Phone app) #*1234#, minimize Superuser or SuperSU and look in the window wich appeared for your CSC. In my case there is written "i9100DBTLS7" the important thing is the DBT wich is my region Code. So if you find this code go to: http://www.sammobile.com/firmwares/1/ and search there for your region code in the country option. Download one of the Roms and flash it with Odin (there are some Guides online. READ THEM CAREFULLY!!!) So then you should have an completly stock rom on your phone. Connect it to Kies again to see if a newer Rom is available and update if there is one. To root it simply follow this Guide: http://forum.xda-developers.com/showthread.php?t=1746794
So this is the way to get the newest available stock rom for your phone. If you want to go custom now you can use the guides written by the Developers of the Rom you are looking for.
I hope thats what you were looking for.
Sent from my GT-I9100 using xda premium
Very usefull and detailed information:thumbup: I only want to add that OP needs to do some serious research to learn more about flashing, rooting, firmware differences and stuff, before he/she tries something
I second Donnie Sins. Watch a few videos to get an idea and DO NOT FLASH ANY ROM/KERNEL/FIRMWARE/PIT FILE THAT IS NOT MEANT FOR I9100 MODEL! You have to be very careful with that. Also learn how to make backups like for EFS folder and nandroid backup. Make a nandroid backup always before flashing anything so that if things go wrong, you can get back to from where you started!
Like you, I too was once confused and overwhelmed by the world of Android.. But after a lot of reading over here at xda, finally got the hang of some important stuff related to rooting and flashing, and most importantly my phone!
For newbies like yourself, this is a good thread to get you started:
http://forum.xda-developers.com/showthread.php?t=1826497
Welcome to our world!!
Sent from my SGS II
Myself5 said:
So the first question you have to ask yourself is: Do you want to stay on stock (but rooted) or do you want an custom rom.
You can try to connect you phone per USB to your computer, then run Kies there and look if it shows you an available update. If the phone is from china you can have the Sammy JellyBean 4.1.2 update. If Kies does not show you an available update then the reason is your rooted stockrom. You have then to "call" (It doesn't call anybody but you have to enter it in the Phone app) #*1234#, minimize Superuser or SuperSU and look in the window wich appeared for your CSC. In my case there is written "i9100DBTLS7" the important thing is the DBT wich is my region Code. So if you find this code go to: http://www.sammobile.com/firmwares/1/ and search there for your region code in the country option. Download one of the Roms and flash it with Odin (there are some Guides online. READ THEM CAREFULLY!!!) So then you should have an completly stock rom on your phone. Connect it to Kies again to see if a newer Rom is available and update if there is one. To root it simply follow this Guide: http://forum.xda-developers.com/showthread.php?t=1746794
So this is the way to get the newest available stock rom for your phone. If you want to go custom now you can use the guides written by the Developers of the Rom you are looking for.
I hope thats what you were looking for.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi. Thanks for the help (Which extends to everyone else as well). I checked through Kies and my phone can't update through that. So then I went on to check the CWC by calling the *#1234# number and it showed me that my CWC is I9100OZSKE7. I proceeded to look it up on the site that you posted and found that it was a Taiwan/Hong Kong region (OZS). So now I'm wondering if I should just choose the 4.1.2 version and flash it? And if I do choose to flash it, is there any other alternative than using Odin? Because I saw that Odin has a chance of bricking the phone.
I also have another question regarding to superuser. My superuser binary seems to be very out of date, and whenever I try to update it, it fails at downloading a new binary.
I have the 2.3.1-ef version installed and the latest as superuser tells me is 3.1.1.
Finally, what is CWM? I have ROM Manager installed on my phone and it seems to be related to CWM.
@shahrozeumar: What is nandroid and efs backup?
PS: Sorry if I look like I'm jumping all over the place with my questions. Right now my top priority is to sort everything out on my phone and get a good understanding of it.
*Insert name here* said:
Hi guys, as you can (or cannot) see, I'm a new guy here. Not just here at xda, but I'm pretty much a newbie to android as well. I've gotten a S2 last summer from a friend in Asia to replace my ancient Nokia and it was rooted when I got it through snail mail. I've just rolled with it until now when I realized that the phone could probably do better if I did some upgrading and tweaking here and there after seeing articles about Cyanogenmod and other stuff that came from rooting the phone. From there comes my problem, I'm totally clueless about android. I only know that my phone is rooted since it has superuser, but I have no idea what kind of kernel/ROM it has on it and how I can go about improving it. I'm still stuck on version 2.3.3 because I have no idea on how to upgrade and didn't want to carelessly fiddle with it and break it. So I'm hoping you guys could give me some pointers on what I have as of right now, and what to do in regards to getting things up to date.
The specs (?) of my phone are:
Model: GT-I9100
Android version: 2.3.3
Baseband ver: I9100XXKE4
Kernel version: [email protected] #2
Build number: QUENS.ROOT.FIT.ZSKE7
I don't think my phone is attached to any carrier either, if that's normal for the international version.
PS: I apologize if my question and crappy explanation angers some fine and outstanding gentlemen here, but I'm afraid I cannot help that because of my utter confusion and cluelessness.
Click to expand...
Click to collapse
There's no way anyone is gonna get upset over this.
They all are gonna recommend you to explore the I9100's forum for scaling the need-to-know baseline. So will I.
It's reading time
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you should go for the custom ROMs, preferably 4.0.3 ICS or 4.1.2 JB, you can find already rooted ROMs out there very easily.-
Hey guys. Thanks to the help of everyone who posted in this thread and some major reading, I've managed to update to 4.1.2, root it, and gain a grasp of the basics. I also tried to install CWM after installing 4.1.2, but it just caused a bootloop. Thankfully I made a backup so I just had to restore back to when I started and repeated the process again.
So here's the thing. Why can't I install CWM without it causing me to go into a boot loop? I looked around and it seems that nobody's had this problem.
Also, I'm not quite satisfied by the current stock rom. While it does run smoother and faster than 2.3.3, I find myself unaccustomed to the new setup and somewhat disappointed at the lack of any major improvements other than the aforementioned smoothness and speed. Widgetlocker doesn't let me use my lock anymore, and I can't seem to get the phone to connect with mass storage mode automatically. Does anyone have any suggestions as to what I should flash to that offers customization and function? As it stands right now, I can't install CWM on my phone and it seems to impede me from creating a fallback and from flashing to any custom roms.
Are you sure you're flashing the latest cmw?
You didn't notice major improvements? Comparing to what? GB?
Did you flash philz kernel after you flashed JB?
Keep trying, you're on the fastlane.
Sent from the little guy
gastonw said:
Are you sure you're flashing the latest cmw?
You didn't notice major improvements? Comparing to what? GB?
Did you flash philz kernel after you flashed JB?
Keep trying, you're on the fastlane.
Sent from the little guy
Click to expand...
Click to collapse
I didn't notice a lot that was different from GB aside from the faster battery drain and new UI.
Anywho, I've flashed to philz kernel. Now I have another problem. Google Play keeps crashing automatically for some reason before I flashed to the philz kernel, but now after I flashed to the new kernel, Google Play crashes when I try to update superSU. The new philz kernel won't back up either because of an error in the booting image.
Just to clarify what I did. I rooted my phone using the method mentioned here using Root_SuperSU.0.96.Only-signed and then flashed to philz kernel with the instructions form this thread here: http://forum.xda-developers.com/showthread.php?t=1877270 and used this package PhilZ-cwm6-XXLS8-FOP-4.01-signed since my kernel code seems to be XXLS8.
EDIT: And after all that, I seem to have gotten myself into a bootloop again after using the recovery.
You really need to reflash > factory reset > flash philz.
Sent from the little guy
AW: [Q] Confusion about rooted GT-I9100
*Insert name here* said:
Hi. Thanks for the help (Which extends to everyone else as well). I checked through Kies and my phone can't update through that. So then I went on to check the CWC by calling the *#1234# number and it showed me that my CWC is I9100OZSKE7. I proceeded to look it up on the site that you posted and found that it was a Taiwan/Hong Kong region (OZS). So now I'm wondering if I should just choose the 4.1.2 version and flash it? And if I do choose to flash it, is there any other alternative than using Odin? Because I saw that Odin has a chance of bricking the phone.
I also have another question regarding to superuser. My superuser binary seems to be very out of date, and whenever I try to update it, it fails at downloading a new binary.
I have the 2.3.1-ef version installed and the latest as superuser tells me is 3.1.1.
Finally, what is CWM? I have ROM Manager installed on my phone and it seems to be related to CWM.
@shahrozeumar: What is nandroid and efs backup?
PS: Sorry if I look like I'm jumping all over the place with my questions. Right now my top priority is to sort everything out on my phone and get a good understanding of it.
Click to expand...
Click to collapse
1. Yes you can flash the latest 4.1.2 when it is available for your region.
2. There is is nother option to flash these files than with Odin. But I can tell you if you do everything right don't uplug the cable and don't shut off your PC while flashing you should be fine.
Sent from my GT-I9100 using xda premium
gastonw said:
You really need to reflash > factory reset > flash philz.
Sent from the little guy
Click to expand...
Click to collapse
Sorry, but what do you mean by reflash? Can you be more specific? What do I need to 'reflash' with, exactly? And how?
jb?
Sent from the little guy
gastonw said:
jb?
Sent from the little guy
Click to expand...
Click to collapse
So... do I go back to gingerbread using the backup and flash to jellybean or can I just flash it from jellybean right now?
AW: [Q] Confusion about rooted GT-I9100
*Insert name here* said:
So... do I go back to gingerbread using the backup and flash to jellybean or can I just flash it from jellybean right now?
Click to expand...
Click to collapse
No, simply flash Jelly Bean again. Then go to CWM do factory reset and flash philz Kernel.
Sent from my GT-I9100 using xda premium
Thanks a lot guys. I've finally got a hang of this. Moved on to trying cyanogenmod, it's great, but kinda buggy on a few places. So yeah.
Again, thanks a lot.
Does anyone know how to root the new official firmware release from AT&T last month? (4.0.4 UCLL6) From the one post in all xda I could find on the topic. (It was as a side note) it was said the only way is to use ExynosAbuse. (They said it like it was easily obtainable knowledge...) So I tried that and got now where, even though it says that it is expoitable. (
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
Any help at all is much appreciated.
SOLVED!!!
Solved by creepyncrawly
http://forum.xda-developers.com/showthread.php?p=39996381
It has also been confirmed that this http://forum.xda-developers.com/showthread.php?t=1746181 method works as well.
And if it turns out no root is available for UCLL6, I could resort to http://forum.xda-developers.com/showthread.php?t=1746181this method, correct?
You are the second person that has said the ExynosAbuse rooting method does not work with UCLL6. I'm not aware of any way to root that distribution at this time, so yes, you could install UCLE5 plus root.
My brother had he same issue with his Sprint S2 because the patched the exploit in the latest software release. I showed him the framaroot tool and it worked. It's listed to work on the i9100 but I've never tried it on our devices.
http://forum.xda-developers.com/showthread.php?t=2130276
Sent from my SGH-I777 using xda premium
creepyncrawly said:
You are the second person that has said the ExynosAbuse rooting method does not work with UCLL6. I'm not aware of any way to root that distribution at this time, so yes, you could install UCLE5 plus root.
Click to expand...
Click to collapse
Sorry, my phone's xda developers app has been acting up lately especially when it comes to search. So I've been trying to use browser my phone. My apologies I should have just used my computer and been more thorough with my search. Thanks though
Galaxy S3 T999 rooted and flashed more than daily.
Red_81 said:
My brother had he same issue with his Sprint S2 because the patched the exploit in the latest software release. I showed him the framaroot tool and it worked. It's listed to work on the i9100 but I've never tried it on our devices.
http://forum.xda-developers.com/showthread.php?t=2130276
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks just took a quick look and the i777 is on the compatibility list! I'll give it a try and let you guys know what happens.
Galaxy S3 T999 rooted and flashed more than daily.
blu422 said:
Sorry, my phone's xda developers app has been acting up lately especially when it comes to search. So I've been trying to use browser my phone. My apologies I should have just used my computer and been more thorough with my search. Thanks though
Galaxy S3 T999 rooted and flashed more than daily.
Click to expand...
Click to collapse
No problem. Your report just confirms that ExynosAbuse no longer works. If you try the Framaroot oneclick that Red_81 linked, we'd like to have a confirmation that it does work on UCLL6. Thanks.
blu422 said:
Thanks just took a quick look and the i777 is on the compatibility list! I'll give it a try and let you guys know what happens.
Galaxy S3 T999 rooted and flashed more than daily.
Click to expand...
Click to collapse
Neither of the exploits worked that were in framaroot worked unfortunately, I guess I am gonna attempt to do the other one I mentioned even though my computer doesn't play nicely with android phones for some reason even after I install the drivers (probably something to do with my brother thinking he knows best and ending random processes in task manager and killing startup processes)
Wish me luck
blu422 said:
Neither of the exploits worked that were in framaroot worked unfortunately, I guess I am gonna attempt to do the other one I mentioned even though my computer doesn't play nicely with android phones for some reason even after I install the drivers (probably something to do with my brother thinking he knows best and ending random processes in task manager and killing startup processes)
Wish me luck
Click to expand...
Click to collapse
If you don't mind me asking, why do you want to have LL6? Why not just use one of the other rooting methods and flash a custom rom?
blu422 said:
Neither of the exploits worked that were in framaroot worked unfortunately, I guess I am gonna attempt to do the other one I mentioned even though my computer doesn't play nicely with android phones for some reason even after I install the drivers (probably something to do with my brother thinking he knows best and ending random processes in task manager and killing startup processes)
Wish me luck
Click to expand...
Click to collapse
I need something different to do for a few hours, and I'll be home alone tonight, so I think I will put together a stock plus root package for UCLL6. Don't know if I can get it done before bedtime tonight though. But if not I'll hopefully get to post it sometime tomorrow.
mattdm said:
If you don't mind me asking, why do you want to have LL6? Why not just use one of the other rooting methods and flash a custom rom?
Click to expand...
Click to collapse
I have computer troubles so if I can do it on my phone it is much more convenient. But I can use my moms laptop if I need to.
Galaxy S3 T999 rooted and flashed more than daily.
creepyncrawly said:
I need something different to do for a few hours, and I'll be home alone tonight, so I think I will put together a stock plus root package for UCLL6. Don't know if I can get it done before bedtime tonight though. But if not I'll hopefully get to post it sometime tomorrow.
Click to expand...
Click to collapse
Thanks! Looking forward to it... :good:
Galaxy S3 T999 rooted and flashed more than daily.
I came across Phil's universal rooting method on the i9100 forums a few weeks ago: http://forum.xda-developers.com/showthread.php?t=1746794. In theory, shouldn't it work because it only injects Superuser and Busybox into the proper directory and doesn't touch anything else? I've been meaning to try it out, but I haven't have enough spare time dedicated to flashing back to stock and test it.
creepyncrawly said:
I need something different to do for a few hours, and I'll be home alone tonight, so I think I will put together a stock plus root package for UCLL6. Don't know if I can get it done before bedtime tonight though. But if not I'll hopefully get to post it sometime tomorrow.
Click to expand...
Click to collapse
Awesome!
Shame about exynos, though it is nice that the security hole is fixed.
Here is the stock rooted package for I777UCLL6 4.0.4 ICS:
[Heimdall][Odin][Stock][Root]UCLL6 Stock ICS 4.0.4 with Root
.
Does anyone know if the UCLL6 version still has the eMMC bug and I need to flash a custom kernel?
Galaxy S3 T999 rooted and flashed more than daily.
blu422 said:
Does anyone know if the UCLL6 version still has the eMMC bug and I need to flash a custom kernel?
Galaxy S3 T999 rooted and flashed more than daily.
Click to expand...
Click to collapse
It's unknown. We can only speculate. There were many reports of damage from the leaks that led up to the first ICS release, UCLE5, but the UCLE5 kernel itself did not produce very many reports of damage. I only saw two reports that could have been memory damage due to the cap erase bug, and only one of those seemed to be even half way conclusive. So it is possible it was even fixed in that release.
UCLL6 appearantly fixes some of the other kernel problems that were present in UCLC3 such as the sleep of death, so it may very well be a clean kernel, but this can not be verified by the developers on xda without original source, which is not available.
It certainly would be the safest route to use a custom safe kernel. And as a bonus, the custom kernels are likely to perform much better than stock as well.
creepyncrawly said:
Here is the stock rooted package for I777UCLL6 4.0.4 ICS.
THIS IS UNTESTED - FLASH AT YOUR OWN RISK
ucll6_stock_rooted.tar.7z
I am posting this here for the OP and anyone who wants to take a chance on it. Later today, after I have tested it on my phone, I will post it in the development section.
Click to expand...
Click to collapse
Confirming that ur package worked successfully. Thx for putting this together !!
Did a full wipe before flashing of course. All is well.
EDIT: Fyi, Rebooted into the Stock LL6 recovery and did a Wipe data/ factory reset...Successful also. Rebooted and all is good. Perform this at ur own risk though.
creepyncrawly said:
Here is the stock rooted package for I777UCLL6 4.0.4 ICS.
Enter recovery and perform a wipe data/factory reset before flashing this, or the phone may hang on the Rethink Possible screen during boot.
Odin flashable tar:
ucll6_stock_rooted.tar.7z
(md5: db4f040a1cb531df203088d5796e33cd)
Odin One-click Downloader:
I777UCLL6_OCD_Root_No_BL.7z
(md5: f58fd040a7f38746c8e72a1bdf929bb5)
These are tested working packages. I will post this in the development section later.
Click to expand...
Click to collapse
Thanks just posted about this exact topic.
Working for me as well.
Followed the instructions in your "[Heimdall][Odin][Stock][Root]UCLE5 Stock ICS with Root" post and can confirm that the entire Heimdall,MobileOdinLITE instruction chain worked for me for UCLL6. Am now running CM9 without ever having incremented the counter.
Big thanks creepyncrawly!