hi everyone. for the first time since i joined xda a year ago i feel helpless
it started couple days ago when my girlfriend told me she couldn't get in touch with me cuz my phones turned off. of course, my x10 was turned on and it said i have signal and i'm on my network (rogers). at the time i was on wolfbreak rom 4.0.4 cutom kernel version and it was working fine for a week or so.
then my phone was able to call out but couldn't receive. then it couldn't call out and couldn't receive. but the status bar said i have full bars.
thinking it could be the rom, i flashed tripmiui rom over it. same thing. it said i was on rogers network and 50% chance i could call out but calls wouldn't come through; service busy. then i tried ewjet rom and the new miui 1.9.2 rom as well. so i went back stock
when i did, lockscreen said i emergency call only even though my sim card was in. status bar showing i have bars but still couldn't connect to rogers network. sometimes it would find it sometimes not. so i keep the stock rom and since i don't have money right now to get it fixed or replace, i decided to root, install custom rom and use it as a wifi/portable media device.
while i was trying to root this shows up on flashtool;
05/009/2011 21:09:33 - INFO - turn on Unknown Sources and Debugging
05/010/2011 21:10:22 - INFO - Connected device : X10
05/010/2011 21:10:22 - INFO - Installed version of busybox : None
05/010/2011 21:10:23 - INFO - Running uname -r command
05/010/2011 21:10:23 - INFO - Android version : 2.3.3 / kernel version : uname: permission denied
05/010/2011 21:10:38 - WARN - Please check your Phone and 'ALLOW' Superuseraccess!
05/010/2011 21:10:38 - ERROR - Please Accept root permissions on the phone
any
got this little problem fixed with advanced root but i was wondering if anyone knows what is happening to my x10?? if theres any fix??
First you're in the wrong section, this should go to the Q&A section.
To solve this try flashing a stock firmware with flashtool. Make sure you have the SE drivers installed.
Sent from my X10i using XDA App
I agree, it is 100% stock this way no matter how many roms youve flashed
Regards
Sent from my x10i using xda premium
i will place this topic under q&a but as explained above i did go back to stock firmware and no luck
wrong thread and what MIUI 1.9 ?
Sent from my X10i using xda premium
I faced the same problem With Froyo 2.2
But now its Okay
Try reflashing the new Baseband pack and try it may work
So weird. I tried flashing bunch of diff stock roms before, both eclair and gingerbread before but not until I read about above post. tried again thinking it will be my last try and bam! Got my phone working again. Weird. Thanks everyone
Sent from my X10i using XDA App
Related
I'm not used to make threads with "HELP!" But i waited for this phone sooo long and when i finally got it and flashed it got messed up :/
Well, I live in Mexico, Phone company Telcel.
I had KE4 Buildnumber as stock. then i decided to install KE7 Official rom i downloaded from some website named gadget w/e. When i flashed it with odin (I only used the KE7.tar no Kernel or anything) it rebooted n everything was going ok, but when i turned on my phone i wasn't getting signal anymore .. and i keep getting "Sorry! The process com.android.phone has stopped working unexpectedly.Please try again"
I flashed my phone with KE8 to see if it would work and used CF-Root v4.0 KE8 Kernel and im still having this problem, i have no signal, and if i try to go to Mobile Network settings it says "SIM NOT FOUND" in my app Drawer it says "Telcel GSM" it recognizes im using a Telcel SIM i guess .. and after a while of force closing com.android.phone it doesnt say Telcel GSM anymore.
Sorry for the long thread i just wanted to give as much info as i could. Some help would be GREAT because i just got my phone 3 days ago :/ the battery life was RLY lame i had to upgrade it, Thanks anyway!
Edit: Phone info now
Baseband version i9100DDKE2
Kernel Version [email protected] #2
Buildnumber GINGERBREAD.XWKE8
No1 knows how can i get signal again???
what is your device's country code, when connected to kies (behind pda phone csc in the brackets)?
yesterday, many regions received the kf3 update. maybe that will fix your issue. also, when it comes to sim issues, a factory reset might help and the cross test:
test that sim card in another phone and test another sim card in your sgs2, that way you can determine whether the issue is caused by the card or the phone.
Issue fixed.
How did you fix it?
perrito2000 said:
How did you fix it?
Click to expand...
Click to collapse
Send me a PM with your msn and i'll teach you there how to Root and Flash your phone and remove that annoying "Telcel" animation when you're turning on your phone + improve ur battery life 30-40%!
Intratech said:
Issue fixed.
Click to expand...
Click to collapse
Yeah thanks for the help man I really thought i bricked my phone i end up updating to XEU KF3 Btw! But im experiencing some .. weird lag when scrolling to Page 2 @ Homescreen i tried removing widgets n all but that's fine i guess the lag is barely noticeable and the battery life improved a lot from KE4 to KF3 Thanks man!
Could someone share the solution_??? my customer is asking why she is unable to work with telcel again...
hi everyone. for the first time since i joined xda a year ago i feel helpless
it started couple days ago when my girlfriend told me she couldn't get in touch with me cuz my phones turned off. of course, my x10 was turned on and it said i have signal and i'm on my network (rogers). at the time i was on wolfbreak rom 4.0.4 cutom kernel version and it was working fine for a week or so.
then my phone was able to call out but couldn't receive. then it couldn't call out and couldn't receive. but the status bar said i have full bars.
thinking it could be the rom, i flashed tripmiui rom over it. same thing. it said i was on rogers network and 50% chance i could call out but calls wouldn't come through; service busy. then i tried ewjet rom and the new miui 1.9.2 rom as well. so i went back stock
when i did, lockscreen said i emergency call only even though my sim card was in. status bar showing i have bars but still couldn't connect to rogers network. sometimes it would find it sometimes not. so i keep the stock rom and since i don't have money right now to get it fixed or replace, i decided to root, install custom rom and use it as a wifi/portable media device.
while i was trying to root this shows up on flashtool;
05/009/2011 21:09:33 - INFO - turn on Unknown Sources and Debugging
05/010/2011 21:10:22 - INFO - Connected device : X10
05/010/2011 21:10:22 - INFO - Installed version of busybox : None
05/010/2011 21:10:23 - INFO - Running uname -r command
05/010/2011 21:10:23 - INFO - Android version : 2.3.3 / kernel version : uname: permission denied
05/010/2011 21:10:38 - WARN - Please check your Phone and 'ALLOW' Superuseraccess!
05/010/2011 21:10:38 - ERROR - Please Accept root permissions on the phone
any
got this little problem fixed with advanced root but i was wondering if anyone knows what is happening to my x10?? if theres any fix??
update: now i'm on ewjet's rom and i tried the sim card again. i get data and dialed out success 1 out of 3 calls and still no calls can come through - "the number you are trying to dial is not in service"
Try a different sim card to see if that's the problem.
Sent from my X10i using xda premium
I've tried a diff Sim card, no luck tho
Also, i'm using the Sim card in a diff phone right now and it works fine
dpk0875 said:
I've tried a diff Sim card, no luck tho
Also, i'm using the Sim card in a diff phone right now and it works fine
Click to expand...
Click to collapse
Have you tried a different stock rom? Could be a hardware issue by the way.
Thanks for the help.but I fixed it somehow. I flashed bunch of diff gingerbread and eclair roms until one picked up network signal and can dial in and out. Thank God it want hardware issue
Sent from my X10i using XDA App
dpk0875 said:
Thanks for the help.but I fixed it somehow. I flashed bunch of diff gingerbread and eclair roms until one picked up network signal and can dial in and out. Thank God it want hardware issue
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have the same problem which rom worked for u let me know please.
It wasn't a particular rom that fixed it. I just flashed and flashed stock generic ROM and eclair stock ROM. Altogether I flashed about 10 times and finally got a signal on eclair then upgraded back to gingerbread. So just keep flashing those two ROM til u get a signal;hope it works for u!
Hi,
I am facing a very serious problem with my Xperia X10.
Since yesterday, I am not able to get any calls from anywhere. the notification doesnt even show up. but when i check in the log, the number is present, and when i call that person to confirm, he says that when he had called me, the call got disconnected after 1 ring. i dont see any call notification on my X10i.
Please let me know what should I do.
hi mate.
First of all you if you need help or favor you would need to put some more information such as:
1st: Tell us whether you are on a stock rom or custom rom.
2nd: is it a rooted or unrooted phone.
3rd: If you are using custom rom then whose rom ur using.
4: Have you done some changes recently in your phone before having this issues.
5. which base band and kernel you are on ( u can check if u go settings and then About phone )
after all this probably someone or all of us will be able to help you.
stanzzzzz said:
hi mate.
First of all you if you need help or favor you would need to put some more information such as:
1st: Tell us whether you are on a stock rom or custom rom.
2nd: is it a rooted or unrooted phone.
3rd: If you are using custom rom then whose rom ur using.
4: Have you done some changes recently in your phone before having this issues.
5. which base band and kernel you are on ( u can check if u go settings and then About phone )
after all this probably someone or all of us will be able to help you.
Click to expand...
Click to collapse
Hey stanzzz,
Sorry i am a bit tenses, so couldnt provide much info earlier. Here you go with the more detailed reply:
1st: Its a custom rom WB 6.0.S
2nd: it is a rooted phone.
3: I dont remember doing a major change. just installed some apps from market and updated some apps
5. baseband is 2.1.71 and kernel is 2.6.29.
Please let me know if any more information is required..
Please help.....!!!!!!!!!!!!!!
In my opinion you should do a fresh install again. i was on wolf rom a while ago and never had any issues with it. may be do a fresh install.
so 1st format data(backup ur contact or sync with google and backup only your apps(not data) via zemna (free app in market.)
2 nd : format chache, then wipe dalvic cache. do it like 2 or 3 times.
3rd install the rom again. pretty sure you will be fine..
if you still have issues try some other ROM just to see if its Wolf rom or something else. if you are not that fussed abt timescape try "Violence CM7- ZMOD tweaked. i am using it and its super fast with good network ..sorry DONT try violence ROM as its for unlocked BL UNLESS YOU ARE COMFORTABLE.
ru sure ur baseband is 2.1.71?? if its there still try flashing the baseband again !!
first, if you are on stock ROM, you might want to do a Repair thru PC Companion. Do a backup first of the things you need to save (i.e. messages, contacts, etc.).
if you are on a custom ROM, you do the same as well, Repair first thru PC Companion (or SEUS if you like), then root, reinstall xRec (or CWM), then reflash your custom ROM.
I actually had a similar (?) problem with the WB rom. From time to time (I am going to emphasize that this does not happen often at all and only happens if I lose signal for a long period of time without turning my phone to airplane mode and then going back to a place with signal), my phone will lose its connection to my service provider. The signal bar will be strong but if I scroll down the status bar, it'd say "Emergency Call Only". I was unable to dial out or receive calls. The only way I managed to fix this is to take out both the battery and the sim card for a good 5 minutes and then replug eveyrthing in and reboot. If you haven't reflashed yet, you can try that.
But if you reflash WB rom or another rom, I would also suggest 2 things:
1. Back up a working rom immediately so if this happens again, you can use backup
2. See what apps you downloaded off market. Check what you updated as well. Remember not all apps in market are "safe"--some apps can really screw your phone. Some apps also have funny reactions to phones. So test each app after installation to find the problem app.
avarora said:
Hi,
I am facing a very serious problem with my Xperia X10.
Since yesterday, I am not able to get any calls from anywhere. the notification doesnt even show up. but when i check in the log, the number is present, and when i call that person to confirm, he says that when he had called me, the call got disconnected after 1 ring. i dont see any call notification on my X10i.
Please let me know what should I do.
Click to expand...
Click to collapse
This problem maybe is easier than you think,this behaviour of the phone its the same when you modify a contact and check the box to send the call to voicemail,you dont even notice the incoming call,but when you see the call logs,call is there,check that first.
Ok so I've been reading around in a few threads about this but haven't quite found a solution in my case and I think I need a second opinion. I've also posted in other on going threads but it just gets lost in the rabble so.... it now gets it's own thread.
Bought a brand new Bell SGS2 from a dude on Kijiji. It was brand new, still in the box with the plastic all on it. I SIM unlocked it (which required rooting it) and dropped my Rogers SIM chip in.
I can send/receive txt's but 3G data drops frequently and usually happens once I initiate a data session. My test case uses SpeedTest. I've only seen it complete a full test cycle twice... most of the time, it will get the ping, start the download test and 10% in, the data connection drops and 3G/H+ icon disappears. It takes about 1-2 mins for the data connection to return. I've tried market access or web browsing and same thing happens once a data session initiates.
I've installed a slew of modem/ROM combinations via Odin from XXKH3 to XXKI4... nothing... same issue. Seemed worse with KI4 too!
I've tried different APN settings, disabling fast dormancy and specifically trying to enable only HSPA bands. Nothing. Same problem.
I've since reverted back to stock BELL firmware and tried a friends Bell SIM chip and noticed THE SAME thing happening! So this would definitely tell me it's a hardware problem. It's been more than 15 days so Bell won't even talk to me as the return period has passed and I'm not a bell user so screw them.
I guess at this point, I should test my luck with Samsung but it's been rooted and even though I've un-rooted the binary counter shows 2 which means.... I'm screwed for warranty right?
U can reset the binary counter after flashing back to it original state by using jig. Google for galaxy s2 jig
Btw, why dont u just flash original samsung I9100XXKI3 rom? Which provide good modem. Check my signature, 'boot loop', theres a link lead u to installation guide with download link provided. All is there.
Sent from my GT-I9100 using xda premium
I personally found XXKI3 Modem to be best for Bell's SGS2 (currently using it on Telus).
Tried all the modems' including KI3... didn't work.
In recovery mode, fix permission, reboot and check the 3g again.
Try another method, flash cm7 nightly latest version #16. If the problem still exist, thats mean its related to phone's hardware.
Sent from my GT-I9100 using xda premium
neobirdrio said:
In recovery mode, fix permission, reboot and check the 3g again.
Try another method, flash cm7 nightly latest version #16. If the problem still exist, thats mean its related to phone's hardware.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Well I got it new out of the box but I had to SIM unlock it which required rooting and etc....
I did power-volume up-home... got into recovery mode and... there is no option to fix permissions. Keep in mind this is the stock ROM I put back on.
CM7 is another idea.... not against that.
Well. Maybe some failure occured during rooting your phone before. Install rommanager app from the market, open then select flash recovery mode, then select your phone model.. This will give u recovery v4 which will give u more option on recovery mode. This is the easiest way to get more option cwm. U will have fix permission option when u done.
Sent from my GT-I9100 using xda premium
i have the same problem i.e data loses connection. after a fresh flash of stock rom and factory reset , it starts working fine for a week or so and then the shyt happens again . i can tell u , its not a hardware issue, it more like a software issue.
i m not good at android but wen i used to run squid on a linux machine as a proxy server , i recall i had to clear a log file to make data flow possible every few days. i think android has a similar issues some logs files build up or some **** like that.
First I want to thank all members that have invested precious time and effort to help everyone! You are doing an amazing job!
Second thing I want to say is that I've searched the hell out of the Xperia X10 forum to find solution for my problem. But everything I found and tried was so far unsuccessful. After 1 week of unsuccessful trials, today I decided to join and open this thread as a final effort to seek for answers and a possible solution.
Problem: Every time I open camera application I receive message: "Camera not available"
Tested solutions:
1. I tried SEUS and upgraded to latest firmware: - Phone wont start, gets stuck on camera icon.
2. I tried Sony PC companion, update mode: Same as number 1. Then I tried repair mode: Same as 1.
3. I tried Re-installing a dozen of stock firmwares, 1.6 , 2.1 , 2.3. From branded to Global: - Phone works perfectly, but "Camera not available".
4. I rooted, installed xrecovery, tried several solutions, changed files. no progress.
5. Installed custom rom: Donut HD2.2.6 - Phone works amazingly, but "Camera not available"
Phone info:
Sony Ericsson Xperia X10i
Baseband: 2.1.71
Kernel version: 2.6.29-00054-g5f01537 [email protected] #1
Build number: DonutHD2.2
ETS is ******-8
Currently rooted and installed CWM and Xrecovery.
Cant unlock bootloader since it doesn't recognize certificate
I had a SD card problem before. Solved it by formating sd card with HP disk format software.
I hope someone could help me with this. I don't want to believe that the camera is dead because the phone is in perfect condition. But this would eventually be the final answer.
Thank you!
Have you try this:
http://forum.xda-developers.com/showthread.php?p=12061644
I don't know if that is solution for your problem, but you may try.
Sent from my X10i using xda premium
Dzufa said:
Have you try this:
http://forum.xda-developers.com/showthread.php?p=12061644
I don't know if that is solution for your problem, but you may try.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Unfortunately I'm not able to try and test this solution because I requires a rooted stock android 2.1 (eclair).
My phone doesn't start up on any of the 2.1 stock versions. So far I flashed around 7-8 different 2.1 versions from global to branded etc. but no luck.
Camera with arrow on screen icon appears after which "Sony Ericsson" screen appears and phone gets stuck here and phone temperature rises.
This happens with all 2.1 versions and also when I update with SEUS latest X10 android version.
Only 2.3.3 functions properly on my phone and amazingly battery lasts for 2-3 days even with constant usage of wifi, calls, music and gaming.
But when I tried your suggested solution with the rooted 2.3.3 it gave me some errors in the CMD. Which I tried resolving by running "runme" file as administrator. But another error appears. This is I suppose because of the different android version. The guy says that it works only on a rooted stock 2.1 firmware.
Is there any other way I could test his solution on 2.3.3 rooted stock firmware ?
Thanks again for the reply!
I appreciate it!