samba filesharing not working for me ... - Gen8, Gen9, Gen10 Q&A, Help & Troubleshooting

Hi,
Anybody using samba filesharing app?
http://nl.appbrain.com/app/samba-filesharing/com.funkyfresh.samba
I use it on my desire and works like a charm, however it doesn't work on my archos 101 with uruk 1.5
I install the app, allow superuser access and then I get a "Unable to find a way to execute shell commands" error.
I have superuser 2.3.6.3 with su binary v2.3.1-ef
There is a new binary available but I can't install it (I need to flash the zip), could this be the issue?
If so, how do I flash this zip?
Restart in Boot menu => recovery system and then what? update firmware or developer edition menu and flash kernel and initramfs?
thx!
Cheers
B

As Uruk has an embedded Samba, what do you need that for?

tried that but it doesn't work, it says "error during command" when I try to start it up... when I check "enable at startup" and restart my device flips out and keeps restarting
cheers
b

I used it on Defy with Stock Eclair and stock Froyo, but with CM7 RC1.5 it doesnt work, same errore message as the one from the threadstarter

Related

help...

Hello.i was just wondering if its possible to root my g2 without a computer?
YEs
yes you can all you need is
*wifi
* download
http://zenthought.org/system/files/asset/2/flashrec-1.1.3-20091107-2.apk
*http://rapidshare.com/files/360227978/recovery-RA-hero-v1.6.2.img
*astro file manger from market
download flashrec and recovery-RA-hero-v1.6.2.img put them on your sdcard in the root of it then open astro install flashrec.apk (http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/) the hole guide watch it
Nope
At the moment, no (as far as i'm aware). Because you will have to get Superuser Permission (=Root acces) on your device. This can only be installed via adb (command system to do **** to your phone when linked to a computer).
Some custom roms already have rootacces build-in, but to install them you have to got a custom recovery and you can only install that via adb.
Be happy to pm me if you have any other questions
EDIT: Didn't know flashrec exploit was still working. Man those guys are slow And after you have installed the custom recovery, you don't have root acces YET. You will have to install a custom rom, or hook up to a computer and push su.apk
Lol i dnt have wifi eather lol just my phone lol
you dont need wifi but if you do it you are going to get a high bill if you dont have a surf package

way to reinstall allshare apk?

I have the dlna.apk and the odex file was curious if there was a way to adb it back on the phone.. ( I removed it thinking I wouldn't use it )
I just don't know the commands for adb and if I try and just put them on sd card and install it says it is already installed but I know it is gone cause I removed it via titanium backup.
send it to me and let me see if i can do some work on getting it back on the phone. i took mine off too like you but dont have the dlna.apk
BRANDENDEUCE said:
send it to me and let me see if i can do some work on getting it back on the phone. i took mine off too like you but dont have the dlna.apk
Click to expand...
Click to collapse
http://www.mediafire.com/?hr510y2s9apihuy
Check the ADB threads and/or Root Explorer (it could probably do this too) for the commands.
As a last resort, if you really need it and can't figure it out.. just download the stock ROM in the dev forum and flash/restore it but you'll have to redo the settings so back up data with Titanium Backup.
Dlna.apk AllShare reinstall fail.
I'm using the Vibrant9 Eclair 2.1 rom which has removed Dlna.apk aka AllShare.
Any ideas how to get this reinstalled?
Some of my results.
When I try to install via the Vibrant file browser it I get the usual
"Do you want to install this application"
I click on Install and get
"Application not installed"
Tried to install via adb.
./adb install /SDK/app/Dlna/Dlna.apk
1175 KB/s (787522 bytes in 0.654s)
pkg: /data/local/tmp/Dlna.apk
execv /system/xbin/procrank returned -1
execv /system/xbin/librank returned -1
/mnt/.lfs: Function not implemented
execv /system/bin/parse_radio_log returned -1
[1] Killed pm install /data...
Tried to install while in adb shell, no errors untill reboot, got stuck on splash screen until it ended on a black screen, soft keys lit and stayed lit when I pressed them.
# install /sdcard/Dlna.apk /sdcard/system/app
# reboot
(black screen after splash loop on reboot)(adb shell active, can't gain su access though)
I've failed on trying to get it reinstalled too, anyone knowledgeable enough to fix this?
Bump... trying to get this working on FrankinTwiz...
Works fine on Bionix ROM, wonder whats different
I'm having the same issue. I can't get it to work on FrankinTwiz
Any luck?
I know this is an old thread, but has anyone had any luck at getting the Allshare app reinstalled with custom roms? I've googled to no avail.
u could try creating a .zip file and placing the dlna.apk in systems\app folder and flashing it in CWM.
For example, ur .zip file would look something like this.
C:\customzipfile.zip\system\app\dlna.apk
I havent tried it out though so not sure if it may work. Dont burn down my house if it doesnt. It just seems feasible.
Did you guys ever consider trying Bloater?
I'm trying to install it on my Nexus S, without success. Where should I put the Dlna.odex? When I installed the Dnla.apk, it says "installation succesful", even though it's not. Here's the log:
Code:
D/PackageManager( 332): Scanning package com.sec.android.app.dlna
E/PackageManager( 332): Package com.sec.android.app.dlna requires unavailable shared library touchwiz; failing!
W/PackageManager( 332): Package couldn't be installed in /data/app/com.sec.android.app.dlna-1.apk
I/InstallAppProgress( 7472): Finished installing com.sec.android.app.dlna
You can find the zip here, by the way: http://forum.xda-developers.com/showpost.php?p=7259961&postcount=5
Binary100100 said:
Did you guys ever consider trying Bloater?
Click to expand...
Click to collapse
+1 search and download
Samsung Allshare (DLNA)
pphi said:
I've failed on trying to get it reinstalled too, anyone knowledgeable enough to fix this?
Click to expand...
Click to collapse
Try serendipity7.weebly.com/add-ons . html
Hope this helps...

Running a zip from revolutionary recovery

I have an HTC Evo 3D with HBoot 1.5 and have already unlocked it through HTC. I have also flashed recovery cwm-4.0.1.4-shooter.img. I have put the su-2.3.6.3-efgh-signed.zip on my sd card.
Now when I load up the bootloader and go into recovery aka blue screen with many options (revolutionary) and lock the sd card to phone and try to load zip from sd and it starts installing....however it stops and has an error message that is...
-- Installing: /sdcard/su-2.3.6.3-efgh-signed.zip
Finding update package...
Opening update package...
Installing update...
**********************************************
Superuser 2.3.6.3 for Android 2.0-3.1
**********************************************
Mounting SYSTEM...
Deleting SYSTEM:bin/su...
Deleting SYSTEM:xbin/su...
Extracting files to SYSTEM...
Setting SYSTEM:bin/su permissions to 6755...
Creating SYSTEM:xbin/su symbolic link...
E:Error in /sdcard/su-2.3.6.3-efgh-signed.zip
(Status 0)
Installation aborted.
----any help in this matter will be greatly appreciated
Thanks.
in addition....
would it be easier/a better way to flash it from the command prompt like the recovery mod?
http://forum.xda-developers.com/showthread.php?t=1239821 this has a instuctions on how to adb push su file & install
have SU and running barnacle....
i am now having a slight problem with the barnacle wifi tether app. when i boot it up and start tethering it says:
Starting...
Data network is ready
.ini file prepared
WIFI: driver loaded
Could not connect to NAT, will retry later
Running...
my laptop connects to the barnacle tether but no internet access...
i am also trying to connect my PS Vita to it but it wont find my phone at all
I already have Skip wpa_supplicant checked ON to configure wifi directly
under the barnacle settings.
custom wifi ad-hoc...
do i need to select a setting under the
Custom Wifi Ad-hoc?
only options are:
none
Hero/Eris
Samsung
Aria/Liberty (see blog)
SU binary updater
Also when running the Barnacle for the first time it said my SU was out of date and the SU app binary updater automatically updated my SU to version 3.0.3.2
dont think this would cause a problem but noting just in case...
Thanks again...
Try usinng this one its free an works for me http://code.google.com/p/android-wifi-tether/also in stall busybox installer from the market place
Sent from my PG86100 using XDA Premium App

[Q] Ubuntu via chroot on Atrix with laptop dock

I've read through the threads in the dev section about running linux on our Atrix either off of the sd card or chroot but didn't get a clear picture of what is possible with this technique using our phones on the laptop dock.
I'm about to give this one a go where it walks you through installing Ubuntu on our phones.
how-to-install-ubuntu-on-android
Does it work well? Does the touchpad and keyboard work without issues? Do the usb ports function correctly? And finally, does it play nice with Webtop if you have Webtop installed and enabled?
Thanks in advance for any info.
Update: The install script for this method failed when ran. It appears it is looking for a specific kernel version. The error I received was "FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory". When I looked in the /lib/modules directory on the phone I only found a 2.6.29-arm2 directory.
you can just use WebTopScripts and Webtop2SD.
You can see how it works on my video [Polish language on video only]
http://www.youtube.com/watch?v=MGfZe4jOdfo
ovitz said:
you can just use WebTopScripts and Webtop2SD.
You can see how it works on my video [Polish language on video only]
http://www.youtube.com/watch?v=MGfZe4jOdfo
Click to expand...
Click to collapse
I checked out your video and I wish I could understand Polish.
Anyway, I just installed webtop2sd and when I launch it I get a force close error popup saying...
"Sorry! The application webtop2sd (process net.toreishi.webtop2sd) has stopped unexpectedly. Please try again."
I'm running stock 4.5.141 build with root and unlocked bootloader. Any idea on why I'm getting this error?
I can translate this video if you want to
yes, you have to instal bussybox installer form Google Play Store, then you need to change permissions of busybox in/system/bin/
Open permissions and uncheck "Set GID" permission, save changes.
ovitz said:
I can translate this video if you want to
yes, you have to instal bussybox installer form Google Play Store, then you need to change permissions of busybox in/system/bin/
Open permissions and uncheck "Set GID" permission, save changes.
Click to expand...
Click to collapse
Thanks for reminding me about Busybox. I didn't bother to install it since when I updated my Superuser binary it said it was installing a custom Busybox so I thought that would be all I would need. I guess I was wrong and had to install Busybox anyway.
I'm running the WebTopScripts at the moment. It seems to be going well.
Thanks for your help.
help please
Ok first off let me say that I am very new to android so I am a noob. Lately I have received my Atrix 4G lapdock and I have been scouring over these forums attempting to install ubuntu or some other desktop linux distro on my device for the past week.
I have installed Webtop2sd 1.1.2 (I was getting force close with 2.0 version so I downgraded :/ ) I want to partition my sdcard but it is not being recognized by webtop2sd. I have changed permissions to uncheck set GID in busybox which is installed in systym\bin ...\xbin. Still no recognition.
I have attempted to ext3 partition my sdcard with Windows Mini Tool Partition Wizard but I get and error during processing and the partition cannot be created. Currently sdcard is fat32 format.
Can anyone please provide some assistance in this it would be most helpful!
Thank you!
Device stats:
unlocked BL, rooted, and ROM Nottachtrix 4G and faux 1.3 Ghz Kernal installed
Fixed!!!
For some reason the partition tool was acting up so I used another software which did the trick.

HELP!! Signature verification failed w/ non-official Cyanogenmod 10 ROM for Sanei N10

Hello everyone. Let's see if anybody can help me, because I'm pretty stuck with this.
Note: I've already searched high and low for solutions to the "Signature verification failed", but they either don't work or don't apply here.
I've tried to install the following ROM from xda-developers in a Sanei N10:
Unofficial CyanogenMod 10 for many AllWinner A10 tablets
I've installed it following the usual procedure:
- Press Vol+ and Power to get the Recovery menu
- Select Wipe data/factory reset
- Select Wipe cache
- Install the three ZIP files: "cm10_a10_20120913.zip", "gapps-jb-20120726-signed.zip" & "n10_compatibility_1.2.1.zip"
The problem is, even though the first ZIP with the ROM installs successfully, the second one (the one with Google's apps) refuses to install, showing instead the message "signature verification failed". The same happens with the third ZIP (N10 compatibility).
So the installation doesn't actually finish. If I reboot the tablet, it runs Cyanogenmod 10, but the touchscreen doesn't work (I have to plug a USB mouse to interact with the operating system).
So what do I do to avoid the dreaded "signature verification failed" message? Just in case if it's of any help to identify the problem, I'll mention that I can see the Android bot laying down with a red triangle with an exclamation when entering the Recovery menu.
I've tried to use the ROM Manager which is preinstalled with Cyanogenmod 10, but when choosing "Flash ClockworkMod Recovery" it says that "The SD Card needs to be mounted to use ROM Manager". Of course my MicroSD is properly mounted (I can see its files in the card from console, from the "Terminal Emulator"). I think this happens because the MicroSD is mounted in /storage/sdcard1 instead of in /storage/sdcard0, but I can't change that. I can't download APKs from the browser, either, because it also says something similar about not being able to access the SD (even though it's correctly mounted and can see it mounted from Settings > Storage).
I've also tried the CyanogenMod A10 ROM available in this page, which is more recent (October instead of September):
http://www.slatedroid.com/topic/3870...mod-10-tweaks/
But the same happens.
I've even tried installing the CWM Recovery ROM, but it doesn't let me installing that from the Recovery either (same message about the "signature"), and with Odin3 it doesn't work either because I don't know how to reach the "download mode", which is needed for Odin3. Pressing Vol+ and Power I get the Recovery, but not the Download mode. Does anyone know how do I get to the download mode in the Sanei N10?
Any idea about how to solve this? Right now I have a tablet with no touchscreen and not even Google applications (so I don't even have the Play Store), so it's practically worthless (at least the WiFi works). How can I get this tablet back to being usable?
Did you fix this? I want to get this tablet and most likely want to root and rom it but if this is the case...
benny6812 said:
Did you fix this? I want to get this tablet and most likely want to root and rom it but if this is the case...
Click to expand...
Click to collapse
No, unfortunately I still couldn't fix it
There's nobody here in xda-developers who can help me? Surely somebody must know enough to help me find a solution.
I've tried creating a symbolic link from /storage/sdcard1 to /storage/sdcard (it doesn't exist right now), but it just says "link failed Read-only file system" (I was root, by typing "su" and clicking "Allow" in the Superuser window). So, I can't create symbolic links even while being root user? I need this link so ROM Manager can detect my SD Card (it says it's not mounted but it really is, but in "/storage/sdcard1").
Also, the gapps package linked in the ROM page above seems not to be properly signed, even though it has that "-signed" suffix in its name. I always get that "signature verification failed" error message. But now I've tried downloading a more recent gapps package (gapps-jb-20121011-signed.zip) and that package finally worked! BUT, even though it apparently installed successfully, I still can't see any Play Store icon, nor any other Google app (Gmail, etc.). Why? Those icons should appear after installing gapps, shouldn't they? Maybe this newer "gapps" package is somehow incompatible with this tablet? (is this even possible?).
Also, even though I can now install the newer "gapps" package, I still can't install the "n10_compatibility_1.2.1.zip" file (I still get "signature verification failed" for that ZIP), which, I guess, contains the drivers needed for the N10 so the touchscreen works (currently it doesn't, and I have to use a USB mouse to use Android in this tablet). Any ideas? I'm getting tired of trying 9485738489754935627 things with no good result . I guess Android is showing here its Linux roots...
I think the key here is managing to install a new Recovery ROM that doesn't care about signing, but how do I do that? I can't install through ROM Manager because I get that error about the SDCard needing to be mounted to use it (and it's really mounted), and then I can't create the /storage/sdcard symbolic link because I get that "link failed Read-only file system" error. Also, I can't use Odin3 because I can't manage to put this tablet in Download Mode. Aaaargh! There's no good solution
Any ideas?
Bump!
I have same problem, i think that we need a different compatibility file, or perhaps if we could open install any app like Novo7 we could fix it... hope that anyone have the solution.
Yojimbojpr said:
I have same problem, i think that we need a different compatibility file, or perhaps if we could open install any app like Novo7 we could fix it... hope that anyone have the solution.
Click to expand...
Click to collapse
Thanks for replying. If we could find some way to install a new Recovery, then we'd probably by able to get the N10 Compatibility file working. This can't be that hard to do, but I've tried lots of things, and none of them worked...
Anyone?
Please, someone help!
Bump!
No ideas?
Please, I'm getting desperate
sanei
OMA2k said:
No ideas?
Click to expand...
Click to collapse
same problem here....
jamjamjan said:
same problem here....
Click to expand...
Click to collapse
Please let me know if you find a solution to this. Thanks!
I'm having the same issue with [ROM][CM10/10.1][21 Dec] Codename Lungo
Well, at last I could finally solve the problem thanks to chris5s from this forum.
These are the steps that worked for me:
1. Download the latest ClockWorkMod for Allwinner A10 tablets from here:
http://forum.xda-developers.com/showthread.php?t=1802268
2. Put all three files in the ZIP inside the root of a MicroSD card and insert it in the tablet
3. Check from the Terminal app inside the tablet to see if the MicroSD card is mounted in /sdcard (just type "ls /sdcard").
4. If the "ls" command doesn't show anything (that's what happened in my case), then you must modify the "install-recovery.sh" file and replace all instances of "/sdcard" with "/mnt/extsd".
5. With the proper "install-recovery.sh" file, run the commands specified in the above xda link (in my case the card is in "/mnt/extsd" instead of "/mnt/sdcard" as the original example shows):
su
cd /mnt/extsd
sh install-recovery.sh
sh reboot-recovery.sh
6. The tablet will then reboot to CWM recovery. Then follow the regular steps to install Cyanogenmod (wipe plus install ROM + GApps + Compatibility). This time the Recovery menu won't care about the files being unsigned and will install them right away!
I hope this helps somebody else!
hey i just registered because i have been having the same exact problem i read that you fixed it but how can i get in to the tablet if im not able to do any movements after it boots ???
please any help would be appreciated
Download the file again, and try again
Sent from my GT-N7000 using xda app-developers app
Thatgrass said:
Download the file again, and try again
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i did i just dont know how to get in to the terminal app
ok so im in the terminal app but what do you mean by modify the install sh file ???
Hello "lesanei"
I just noticed your posts. Let's see if I can help you...
The touchscreen doesn't work because the appropriate drivers were not installed (because of the "signature verification failed" issue). So you need to connect a USB mouse (and preferably a keyboard too) to the tablet. The Sanei N10 should come with a USB to micro-USB adapter. If you don't have it, you can buy it for cheap here.
Since there is only the one USB input in the tablet, you can't connect two USB devices at the same time. What I did use is a wireless mouse+keyboard combo which only needed one USB dongle for reception. If you don't have that, you can just connect a USB mouse and type with the on-screen-keyboard using the mouse. It's annoying, but it works
When I say "modify the install-recovery.sh file", I mean the file inside "cwm_recovery_6.0.1.2_a10.zip". You can modify it from your PC if you prefer. You don't have to do it in the tablet if you don't know how to use the "vi" editor (command line editor). Just open the "install-recovery.sh" file in Wordpad (do not use the Notepad, because it doesn't support Unix line endings so it shows the file incorrectly) and replace all instances of "/sdcard" with "/mnt/extsd". So the file contents should look like this:
#!/system/bin/sh
if busybox test ! -f /mnt/extsd/recovery.img; then
echo no /mnt/extsd/recovery.img
exit 1
fi
cat /mnt/extsd/recovery.img > /dev/block/nandg
sync; sync; sync
echo done
Click to expand...
Click to collapse
Then place all three files ("recovery.img", "install-recovery.sh" and "reboot-recovery.sh") into your MicroSD card. Then safely extract it from your PC, insert it in the tablet and type this from the Terminal:
su
cd /mnt/extsd
sh install-recovery.sh
sh reboot-recovery.sh
Click to expand...
Click to collapse
Then follow the regular steps to install Cyanogenmod and this time all files should install sucessfully, so when rebooting, touchscreen and everything else will work.
Let me know if it works for you.

Categories

Resources