can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
im not sure if this will solve your problem or not. check the link below
http://forum.xda-developers.com/showthread.php?t=936733
Not possible u will be stuck on bootloop...
4llerbuntu said:
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
Click to expand...
Click to collapse
If you wanna use a lower bb then your best option if you wanna have GB is to go back to an old custom GB rom that works on the older baseband.
hi, you can do it, but be carefull, do it on your own risk!!!!!!!!
what you need is
flashtool http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
baseband http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband
i hope you know how to use flashtool, so when you have your favorite baseband its an ftf file, open it with 7.zip and delete the kernel.sin, so you will flash only the baseband.
now you are on your favorite baseband with GB kernel, but maybe you cant send sms, then you need an sms patch from here http://forum.xda-developers.com/showthread.php?t=1177744
i tested only bb67 with GB kernel and sms patch on custom rom, and it works for me
Zocker Tko said:
hi, you can do it, but be carefull, do it on your own risk!!!!!!!!
what you need is
flashtool http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
baseband http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband
i hope you know how to use flashtool, so when you have your favorite baseband its an ftf file, open it with 7.zip and delete the kernel.sin, so you will flash only the baseband.
now you are on your favorite baseband with GB kernel, but maybe you cant send sms, then you need an sms patch from here http://forum.xda-developers.com/showthread.php?t=1177744
i tested only bb67 with GB kernel and sms patch on custom rom, and it works for me
Click to expand...
Click to collapse
It won't be stable unless you switch to a custom rom that supports the chosen baseband.
solution
4llerbuntu said:
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
Click to expand...
Click to collapse
although this thread is different, the attachment works for you too.
flash it with Xrecovery after installing the rom you want. works for custom roms (genric roms i dont know, maybe).Make sure you only use Xrecovery below 1.0 (dun use 1.0, use 0.3 or 0.2 or 0.1)
it will change the baseband to 46 or 54 nt sure, but it does downgrade. but make sure YOUR ROM IS BASEBAND-DOWNGRADABLE or else your rom will be corrupted. you can also install a new rom AND FLASH IT RIGHT AFTER YOU FLASH THE ROM THROUGH xREC.
regards
Related
Hi today I flashed the new 2.2 rom with cyanogen v2 and I didnt really like it so I wanted to flash my 2.1 back nandroid style. I did it but it wasn't successful and there was no baseband, therefore no calling or sms. How do I fix this error?
Download the graphical flash tool, download a 2.1 firmware, flash.
http://forum.xda-developers.com/showthread.php?p=10738467
so if i wanted my phone to be exactly how it was before in 2.1, I would still have to flash this baseband?
to make this a little more clear. I made a nandroid of my 2.1 rom before i downloaded 2.2. I want 2.1 back and flashed it but there is no more baseband anymore (.54)
yea if ur baseband is messed up and you want 2.1 again. ur gonna have to relash the firmware that you want.
mrljlamon said:
yea if ur baseband is messed up and you want 2.1 again. ur gonna have to relash the firmware that you want.
Click to expand...
Click to collapse
Or run SEUS to get clean 2.1
mrljlamon said:
yea if ur baseband is messed up and you want 2.1 again. ur gonna have to relash the firmware that you want.
Click to expand...
Click to collapse
I can flash just the firmware and keep everything else right? So that way I can get my baseband back. Do you know which one I should flash?
Sent from my X10i using XDA App
Mods feel free to move this thread.
I just wanted to ask and make sure before i got flashing stuff, if i backup my WolfBreak CM and then flash the kernel testing <everything>, then when i get done having a look see at that if i flash bb 54 again and wipe everything then restore all but data of the CM, will the FreeKernel still be trying to load, or will everything be working correctly?
Yes.
Even yesterday I flash new kernel on my mod/rom just to checks few things. After that I went to xrec and just restore my backup and everything was at it should. I don't even wipe anything.
Sent from my X10i using XDA App
Everything should be sweet mate after you restore your backup with xrecovery.
Alright thanks guys
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
where did you get the baseband .52 files? i can't find them anywhere..
sjondenon said:
where did you get the baseband .52 files? i can't find them anywhere..
Click to expand...
Click to collapse
You can find them all here: http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband+collection
Guys, steps verified please?
Realorasz said:
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
Click to expand...
Click to collapse
why .435? I think it should be .504 not sure though
riginal said:
why .435? I think it should be .504 not sure though
Click to expand...
Click to collapse
.435 has the dt already in it.
Realorasz said:
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
Click to expand...
Click to collapse
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
DooMLoRD said:
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
Click to expand...
Click to collapse
Thanks. And just to make sure if i restore my backup of my WB CM(without data, that's TB's job) it should go back to normal kernel and stuff right?
Also, will flashing the DT update from Bin4ry cause any problems? I love me some DT.
DooMLoRD said:
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
Click to expand...
Click to collapse
yep, that's what I meant
Q
can i flash the custom kernel on wolfbreak 2.2.1
Realorasz said:
Thanks. And just to make sure if i restore my backup of my WB CM(without data, that's TB's job) it should go back to normal kernel and stuff right?
Also, will flashing the DT update from Bin4ry cause any problems? I love me some DT.
Click to expand...
Click to collapse
DT not from the system it's from the baseband
just flash .504 n then flash bb 52
erenz1202 said:
DT not from the system it's from the baseband
just flash .504 n then flash bb 52
Click to expand...
Click to collapse
that's not correct at all....
baseband is the radio of the phone.
dual touch is from the kernel.
Don't answer questions if you don't know what you're talking about
Aaaaaand the question still remains...
_______________________________________________
From my X10a running WB CM 6.1.3 V054
fiscidtox said:
that's not correct at all....
baseband is the radio of the phone.
dual touch is from the kernel.
Don't answer questions if you don't know what you're talking about
Click to expand...
Click to collapse
but bb from rendeiro collection include the kernel
i'm flashing .504 then bb 52 from rendeiro and DT work on all my application without editing build.prob.
erenz1202 said:
but bb from rendeiro collection include the kernel
i'm flashing .504 then bb 52 from rendeiro and DT work on all my application without editing build.prob.
Click to expand...
Click to collapse
well then that is because you flashed the kernel and the baseband in one shot....
My point still stands, and what you said is very misleading. The dual touch is not included in the baseband
fiscidtox said:
well then that is because you flashed the kernel and the baseband in one shot....
My point still stands, and what you said is very misleading. The dual touch is not included in the baseband
Click to expand...
Click to collapse
This is true, baseband and kernel are two different things.
But, in the baseband collection thread, there is a ftf bundle for bb .49
that includes the DT kernel.
Thus, the confusion!
I know this, because I flashed it today, for my MIUI!
DoomLord, where are you? I still havent learned whether or not Z's kernel already has DT, or if ill need to install Bin4ry's DT addon(If so, at what point in the process).
guys i dont know what to do now it's 5:30 here now. i flash baseband 67 on my stock rom 2.1 but the result is unknown baseband i did out the sd card the factory reset but didnt work to me. when i try to repair using pc companion its's said theres no software upvailable please help what i need to do first? can i flash other firmware Generic version 2.1update1 build 2.0.2.A.0.24? my device before is SO-10B ntt docomo it came from japan. should i flash into SO-10B? i really need help!
EDIT: its ok now i flash 2.1_2.0.2.A.0.24 with DualTouch already.. but i have 1 question if need to flash to baseband 67 i need to custom rom? like cm6 with x10i firmware then flash baseband 67? or i can directly flash in stockrom 2.1 with x10i firwmware?
Just flash the older baseband back, the one which you were on.
P.S: Post should've been in the Q&A section
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
kozxmartt said:
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
Click to expand...
Click to collapse
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance. can i flashbaseband even im in cm6? without flashing firmware stock?
gAracUh said:
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance.
Click to expand...
Click to collapse
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
kozxmartt said:
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
Click to expand...
Click to collapse
oh thank you again! but i can flash custom rom in xrecovery right? last question
Are we talking about a stock rom?
In any case just go back to your previous BB (the one that is supposed to work with your stock rom).
gAracUh said:
oh thank you again! but i can flash custom rom in xrecovery right? last question
Click to expand...
Click to collapse
Yes, you have to flash custom ROMs in xrecovery.
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
agentJBM said:
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
Click to expand...
Click to collapse
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
gAracUh said:
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
Click to expand...
Click to collapse
1.Flash Stock
2.Flash Baseband
3.Flash Rom
gAracUh said:
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
Click to expand...
Click to collapse
If you know that, why are you trying to use a incompatible baseband with his ROM?
I find it ironic that people are using that same line over and over suddenly.
They come and ask for help then act like they know what the problem is.
Seriously i am weird ed out.
3 words i am starting to hate "Help, Please, Bootloop"
What version if Trips IRIS do you want to flash.
1.5.0 works well on baseband 67
There are a couple of files you need to patch afterwards or you may get keyboard and/or wifi issues - they are the network library and keyboard layout files. This patch was put up by cobrato but the links to them were in a thread that got deleted.
If you can't find them pm me - I should have them lying around somewhere.
Sent from my X10 TripNMiUI-IRIS using XDA App
I have an xperia x10i
Firmware version:2.1-update1
Baseband version:2.1.54
Kernel version 2.6.29
Build number:2.1.A.0.435
I have rooted my phone using superoneclick and have xrecovery installed.I have little bit experience with custom roms as i used to install custom roms for my friends lg p500 but i am a little confused with the baseband version.
Can someone help by telling me which custom rom can i flash to using xrecovery.I really like this rom http://forum.xda-developers.com/showpost.php?p=16125620&postcount=1
Can i upgrade to this?
Should i change the baseband?
Is there any good custom rom that i can install without changing baseband?
aswinrulez said:
Can someone help by telling me which custom rom can i flash to using xrecovery.I really like this rom http://forum.xda-developers.com/showpost.php?p=16125620&postcount=1
Can i upgrade to this?
Should i change the baseband?
Is there any good custom rom that i can install without changing baseband?
Click to expand...
Click to collapse
no first of all u need to change baseband to install the ROM mostly all the Latest ROMs needed to have baseband .71 for any ROM u currently chose... ya u can upgrade to this ROM its pretty neat and fast... m currently using ROM only....
but befor flash the baseband before installing ROM thru xrecovery...
Thank me if it helped !!
So i have to currenlty flash to .71 baseband now and then only install 2.3.3 ROMs?or shld i flash aftr installing 2.3.3?
And is there a way to flash the basband using xrecovery?Problem is that my usb port is loose and dont knw when it will disconnect
And should i unlock the bootloader first?
or can someone tell me the best 2.1 ROM out there so that i dont have to flash to a new baseband till i get my port repaired
Hello
Pls clear my doubts before flashing this ROM i.e. ThGo2_v17.0c.zip
1. Do I need to change my base band to .71
2. Do i need to flash the original firmware before flashing above firmware to get full feature.
3. Is both the Camera's working ?
4. Will the WIFI also work smoothly?
If possible pls mention the steps so that i dont brink my phone.
Thx in advance.
rk_1000 said:
Hello
Pls clear my doubts before flashing this ROM i.e. ThGo2_v17.0c.zip
1. Do I need to change my base band to .71
2. Do i need to flash the original firmware before flashing above firmware to get full feature.
3. Is both the Camera's working ?
4. Will the WIFI also work smoothly?
If possible pls mention the steps so that i dont brink my phone.
Thx in advance.
Click to expand...
Click to collapse
1) If you are already on 2.3.3(GB-GingerBread) then there is no need to flash .71 basenand as you are already on it.
2) if you want to reduce steps just upgrade to 2.3.3 official via SEUS or PCC
3) what do you mean both camera? we only have one back camera which will work perfectly
4) wifi will also be perfect
THeLogiC said:
1) If you are already on 2.3.3(GB-GingerBread) then there is no need to flash .71 basenand as you are already on it.
2) if you want to reduce steps just upgrade to 2.3.3 official via SEUS or PCC
3) what do you mean both camera? we only have one back camera which will work perfectly
4) wifi will also be perfect
Click to expand...
Click to collapse
Thx for you reply
Do you suggest for going for official firmware or the ROM
if i m on 2.1 then i need to directly flash the custom firmware or install the original firmware ?
rk_1000 said:
Thx for you reply
Do you suggest for going for official firmware or the ROM
if i m on 2.1 then i need to directly flash the custom firmware or install the original firmware ?
Click to expand...
Click to collapse
ofcourse the rom is better.
root it using flashtool
install xrecovery
install the rom via xrecovery
remove battery and flash .71 baseband via flashtool
get the latest flashtool here: www.androxyde.github.com/Flashtool/
and best guide for using flashtool:http://forum.xda-developers.com/showthread.php?t=928343
There is a bigger problem on my hands.. My USB port isnt working and currently i m on 2.1 and need to upgrade ...so guide me how to go about this
rk_1000 said:
There is a bigger problem on my hands.. My USB port isnt working and currently i m on 2.1 and need to upgrade ...so guide me how to go about this
Click to expand...
Click to collapse
if your baseband is .71 then and then only you can upgrade to 2.3.3 because .71 can only be flashed via flashtool using usb.
hey
u r gonna b sorry flashing thgo v17c..... it d most laggy one you can serch it....
better yet download the v17b it is more fast and stable according to me....
one more thing.... you phone wont be any longer recognized by seus as it changes the model no of ur phone from x10i to s0-01c i guess which fcuks up the pc comapnion and to flash any other rom you wud need some help.....
so do pm me.... if you r not satisfied with it.... i would gladly help
Thx guys.. well with no other option to upgrade form 2.1 to any of the versoin without falshing baseband I will have to bear with this one i guess
rk_1000 said:
Thx guys.. well with no other option to upgrade form 2.1 to any of the versoin without falshing baseband I will have to bear with this one i guess
Click to expand...
Click to collapse
You can search for lot of custom roms of 2.1
There were some amazing roms back then
Sent from my X10i