guys i dont know what to do now it's 5:30 here now. i flash baseband 67 on my stock rom 2.1 but the result is unknown baseband i did out the sd card the factory reset but didnt work to me. when i try to repair using pc companion its's said theres no software upvailable please help what i need to do first? can i flash other firmware Generic version 2.1update1 build 2.0.2.A.0.24? my device before is SO-10B ntt docomo it came from japan. should i flash into SO-10B? i really need help!
EDIT: its ok now i flash 2.1_2.0.2.A.0.24 with DualTouch already.. but i have 1 question if need to flash to baseband 67 i need to custom rom? like cm6 with x10i firmware then flash baseband 67? or i can directly flash in stockrom 2.1 with x10i firwmware?
Just flash the older baseband back, the one which you were on.
P.S: Post should've been in the Q&A section
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
kozxmartt said:
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
Click to expand...
Click to collapse
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance. can i flashbaseband even im in cm6? without flashing firmware stock?
gAracUh said:
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance.
Click to expand...
Click to collapse
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
kozxmartt said:
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
Click to expand...
Click to collapse
oh thank you again! but i can flash custom rom in xrecovery right? last question
Are we talking about a stock rom?
In any case just go back to your previous BB (the one that is supposed to work with your stock rom).
gAracUh said:
oh thank you again! but i can flash custom rom in xrecovery right? last question
Click to expand...
Click to collapse
Yes, you have to flash custom ROMs in xrecovery.
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
agentJBM said:
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
Click to expand...
Click to collapse
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
gAracUh said:
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
Click to expand...
Click to collapse
1.Flash Stock
2.Flash Baseband
3.Flash Rom
gAracUh said:
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
Click to expand...
Click to collapse
If you know that, why are you trying to use a incompatible baseband with his ROM?
I find it ironic that people are using that same line over and over suddenly.
They come and ask for help then act like they know what the problem is.
Seriously i am weird ed out.
3 words i am starting to hate "Help, Please, Bootloop"
What version if Trips IRIS do you want to flash.
1.5.0 works well on baseband 67
There are a couple of files you need to patch afterwards or you may get keyboard and/or wifi issues - they are the network library and keyboard layout files. This patch was put up by cobrato but the links to them were in a thread that got deleted.
If you can't find them pm me - I should have them lying around somewhere.
Sent from my X10 TripNMiUI-IRIS using XDA App
Related
Mods feel free to move this thread.
I just wanted to ask and make sure before i got flashing stuff, if i backup my WolfBreak CM and then flash the kernel testing <everything>, then when i get done having a look see at that if i flash bb 54 again and wipe everything then restore all but data of the CM, will the FreeKernel still be trying to load, or will everything be working correctly?
Yes.
Even yesterday I flash new kernel on my mod/rom just to checks few things. After that I went to xrec and just restore my backup and everything was at it should. I don't even wipe anything.
Sent from my X10i using XDA App
Everything should be sweet mate after you restore your backup with xrecovery.
Alright thanks guys
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
where did you get the baseband .52 files? i can't find them anywhere..
sjondenon said:
where did you get the baseband .52 files? i can't find them anywhere..
Click to expand...
Click to collapse
You can find them all here: http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband+collection
Guys, steps verified please?
Realorasz said:
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
Click to expand...
Click to collapse
why .435? I think it should be .504 not sure though
riginal said:
why .435? I think it should be .504 not sure though
Click to expand...
Click to collapse
.435 has the dt already in it.
Realorasz said:
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
Click to expand...
Click to collapse
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
DooMLoRD said:
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
Click to expand...
Click to collapse
Thanks. And just to make sure if i restore my backup of my WB CM(without data, that's TB's job) it should go back to normal kernel and stuff right?
Also, will flashing the DT update from Bin4ry cause any problems? I love me some DT.
DooMLoRD said:
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
Click to expand...
Click to collapse
yep, that's what I meant
Q
can i flash the custom kernel on wolfbreak 2.2.1
Realorasz said:
Thanks. And just to make sure if i restore my backup of my WB CM(without data, that's TB's job) it should go back to normal kernel and stuff right?
Also, will flashing the DT update from Bin4ry cause any problems? I love me some DT.
Click to expand...
Click to collapse
DT not from the system it's from the baseband
just flash .504 n then flash bb 52
erenz1202 said:
DT not from the system it's from the baseband
just flash .504 n then flash bb 52
Click to expand...
Click to collapse
that's not correct at all....
baseband is the radio of the phone.
dual touch is from the kernel.
Don't answer questions if you don't know what you're talking about
Aaaaaand the question still remains...
_______________________________________________
From my X10a running WB CM 6.1.3 V054
fiscidtox said:
that's not correct at all....
baseband is the radio of the phone.
dual touch is from the kernel.
Don't answer questions if you don't know what you're talking about
Click to expand...
Click to collapse
but bb from rendeiro collection include the kernel
i'm flashing .504 then bb 52 from rendeiro and DT work on all my application without editing build.prob.
erenz1202 said:
but bb from rendeiro collection include the kernel
i'm flashing .504 then bb 52 from rendeiro and DT work on all my application without editing build.prob.
Click to expand...
Click to collapse
well then that is because you flashed the kernel and the baseband in one shot....
My point still stands, and what you said is very misleading. The dual touch is not included in the baseband
fiscidtox said:
well then that is because you flashed the kernel and the baseband in one shot....
My point still stands, and what you said is very misleading. The dual touch is not included in the baseband
Click to expand...
Click to collapse
This is true, baseband and kernel are two different things.
But, in the baseband collection thread, there is a ftf bundle for bb .49
that includes the DT kernel.
Thus, the confusion!
I know this, because I flashed it today, for my MIUI!
DoomLord, where are you? I still havent learned whether or not Z's kernel already has DT, or if ill need to install Bin4ry's DT addon(If so, at what point in the process).
hi guys.. sorry for this noob question.. im really a noob.. i just wanna know how to install baseband.. i currently on baseband 54 and i wish to install this rom and it needs baseband 58.
http://forum.xda-developers.com/showthread.php?t=1002836
Click to expand...
Click to collapse
kenzhin said:
hi guys.. sorry for this noob question.. im really a noob.. i just wanna know how to install baseband.. i currently on baseband 54 and i wish to install this rom and it needs baseband 58.
Click to expand...
Click to collapse
You need to flash the .58 baseband for the ROM you wanted right.
Here is flashtool.
http://forum.xda-developers.com/showthread.php?t=920746
Here is a guide for flashtool.
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Flash the baseband with flashtool and use it also for putting on busybox.
Then install xrecovery.
http://forum.xda-developers.com/showthread.php?t=859571
Then install the ROM you wanted to install.
follow ALL STEPS in EACH link.
Keep posting if anything is confusing.
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
im not sure if this will solve your problem or not. check the link below
http://forum.xda-developers.com/showthread.php?t=936733
Not possible u will be stuck on bootloop...
4llerbuntu said:
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
Click to expand...
Click to collapse
If you wanna use a lower bb then your best option if you wanna have GB is to go back to an old custom GB rom that works on the older baseband.
hi, you can do it, but be carefull, do it on your own risk!!!!!!!!
what you need is
flashtool http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
baseband http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband
i hope you know how to use flashtool, so when you have your favorite baseband its an ftf file, open it with 7.zip and delete the kernel.sin, so you will flash only the baseband.
now you are on your favorite baseband with GB kernel, but maybe you cant send sms, then you need an sms patch from here http://forum.xda-developers.com/showthread.php?t=1177744
i tested only bb67 with GB kernel and sms patch on custom rom, and it works for me
Zocker Tko said:
hi, you can do it, but be carefull, do it on your own risk!!!!!!!!
what you need is
flashtool http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
baseband http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband
i hope you know how to use flashtool, so when you have your favorite baseband its an ftf file, open it with 7.zip and delete the kernel.sin, so you will flash only the baseband.
now you are on your favorite baseband with GB kernel, but maybe you cant send sms, then you need an sms patch from here http://forum.xda-developers.com/showthread.php?t=1177744
i tested only bb67 with GB kernel and sms patch on custom rom, and it works for me
Click to expand...
Click to collapse
It won't be stable unless you switch to a custom rom that supports the chosen baseband.
solution
4llerbuntu said:
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
Click to expand...
Click to collapse
although this thread is different, the attachment works for you too.
flash it with Xrecovery after installing the rom you want. works for custom roms (genric roms i dont know, maybe).Make sure you only use Xrecovery below 1.0 (dun use 1.0, use 0.3 or 0.2 or 0.1)
it will change the baseband to 46 or 54 nt sure, but it does downgrade. but make sure YOUR ROM IS BASEBAND-DOWNGRADABLE or else your rom will be corrupted. you can also install a new rom AND FLASH IT RIGHT AFTER YOU FLASH THE ROM THROUGH xREC.
regards
I have an xperia x10i
Firmware version:2.1-update1
Baseband version:2.1.54
Kernel version 2.6.29
Build number:2.1.A.0.435
I have rooted my phone using superoneclick and have xrecovery installed.I have little bit experience with custom roms as i used to install custom roms for my friends lg p500 but i am a little confused with the baseband version.
Can someone help by telling me which custom rom can i flash to using xrecovery.I really like this rom http://forum.xda-developers.com/showpost.php?p=16125620&postcount=1
Can i upgrade to this?
Should i change the baseband?
Is there any good custom rom that i can install without changing baseband?
aswinrulez said:
Can someone help by telling me which custom rom can i flash to using xrecovery.I really like this rom http://forum.xda-developers.com/showpost.php?p=16125620&postcount=1
Can i upgrade to this?
Should i change the baseband?
Is there any good custom rom that i can install without changing baseband?
Click to expand...
Click to collapse
no first of all u need to change baseband to install the ROM mostly all the Latest ROMs needed to have baseband .71 for any ROM u currently chose... ya u can upgrade to this ROM its pretty neat and fast... m currently using ROM only....
but befor flash the baseband before installing ROM thru xrecovery...
Thank me if it helped !!
So i have to currenlty flash to .71 baseband now and then only install 2.3.3 ROMs?or shld i flash aftr installing 2.3.3?
And is there a way to flash the basband using xrecovery?Problem is that my usb port is loose and dont knw when it will disconnect
And should i unlock the bootloader first?
or can someone tell me the best 2.1 ROM out there so that i dont have to flash to a new baseband till i get my port repaired
Currently running CyanogenMod 7 on my Xperia X10i but I want try out the Wolf's TW Gingerbread ROM.
Problem #1: I visited the Wolf's page but I when I try to download the ROM, it redirects me to another page. Should I download the Stock or FreeKernel Version because my Bootloader is locked?
Problem #2: I cannot download the FTF Bundle because the link takes me to a Filesonic account which I cannot access.
Problem #3: I can't seem to find the Speed&Hotfixes file
Please help!!!!!
Hi,
using this ROM (freekernel version), even I cleaned and tweaked it a lot
Dovakiin said:
Problem #1: I visited the Wolf's page but I when I try to download the ROM, it redirects me to another page. Should I download the Stock or FreeKernel Version because my Bootloader is locked?
Click to expand...
Click to collapse
Its on you - but I recommend freekernel version.
Dovakiin said:
Problem #2: I cannot download the FTF Bundle because the link takes me to a Filesonic account which I cannot access.
Click to expand...
Click to collapse
You do not need the FTF bundle with kernel and baseband if you are running 2.3.3 android with .71 baseband. If you are not, will reupload it for you.
Dovakiin said:
Problem #3: I can't seem to find the Speed&Hotfixes file
Click to expand...
Click to collapse
It seems that they are not for these ROMs,I dont have them and have the best performace I have ever seen. But maybe my own cleaning did some extra speed
Thanks mate!
Thanks for the reply
Flashed to CyanogenMod 7 so now I'm currently on 2.3.5 android and baseband .71
Does that mean that I still won't need the FTF bundle ?
Dovakiin said:
Thanks for the reply
Flashed to CyanogenMod 7 so now I'm currently on 2.3.5 android and baseband .71
Does that mean that I still won't need the FTF bundle ?
Click to expand...
Click to collapse
Yes - if cyanogenmod uses baseband .71 then you do not need to flash ftf bundle. Just simply flash the ROM itself
Thanks alot man!
Will be flashing very soon
Flashed Wolfs ROM. Experianced a great amount of lag (don't know why) so I went back to CM7-ZMOD
Sent from my X10 using XDA
Dovakiin said:
Flashed Wolfs ROM. Experianced a great amount of lag (don't know why) so I went back to CM7-ZMOD
Sent from my X10 using XDA
Click to expand...
Click to collapse
In every install of new custom ROM - you MUST do a Dalvik cache clean and mostly the full wipe. The full wipe is not necessary but recommended. After this second reboot is also recommended and taking a few minutes to settle
HeliumX10 said:
In every install of new custom ROM - you MUST do a Dalvik cache clean and mostly the full wipe. The full wipe is not necessary but recommended. After this second reboot is also recommended and taking a few minutes to settle
Click to expand...
Click to collapse
Yep. Did everything you said but still had no joy
It's okay though. CM7 feels awesome Only issue I have is with the Funny Jokes app. Lags quite often. I think Titanium Backup corrupted it's data
But no worries. I love this ROM!
FTF bundle with baseband 71 not available again...pls upload
HeliumX10 said:
Hi,
using this ROM (freekernel version), even I cleaned and tweaked it a lot
Its on you - but I recommend freekernel version.
You do not need the FTF bundle with kernel and baseband if you are running 2.3.3 android with .71 baseband. If you are not, will reupload it for you.
Click to expand...
Click to collapse
Could someone please once again make this ftf bundle available and point me to it... thanks.