Found at USB\VID_0FCE&PID_ADDE\5&476FB6F&0&6
09/047/2011 13:47:31 - INFO - Start Flashing
09/047/2011 13:47:31 - INFO - VER="R8A027";DATE="20100505";TIME="17:14:00";
1 - INFO - Flashing loader
09/047/2011 13:47:31 - ERROR - Error flashing. Aborted
09/047/2011 13:47:31 - INFO - Now unplug the device and power it on
09/047/2011 13:47:31 - INFO - Then go to application settings
09/047/2011 13:47:31 - INFO - turn on Unknown Sources and Debugging
unknown sources and and debugging already turned on
usb driver problem
vhd99 said:
Found at USB\VID_0FCE&PID_ADDE\5&476FB6F&0&6
09/047/2011 13:47:31 - INFO - Start Flashing
09/047/2011 13:47:31 - INFO - VER="R8A027";DATE="20100505";TIME="17:14:00";
1 - INFO - Flashing loader
09/047/2011 13:47:31 - ERROR - Error flashing. Aborted
09/047/2011 13:47:31 - INFO - Now unplug the device and power it on
09/047/2011 13:47:31 - INFO - Then go to application settings
09/047/2011 13:47:31 - INFO - turn on Unknown Sources and Debugging
unknown sources and and debugging already turned on
Click to expand...
Click to collapse
are you using patched loader?
You don't use unlocked bootloader. unlocked bootloader has "r8A027" version.
@Blagus... dude where have you been? MSN?
Try with the older version of flasher "FlashTool_0.2.9.1" the 3.0 versios doesn't work with the mini.
aparici said:
Try with the older version of flasher "FlashTool_0.2.9.1" the 3.0 versios doesn't work with the mini.
Click to expand...
Click to collapse
it work's you just need to make profile for mini ..
aZuZu said:
it work's you just need to make profile for mini ..
Click to expand...
Click to collapse
How I make the profile? Could you explain it? Thanks. When we expect the next update of the kernel?
Blagus said:
You don't use unlocked bootloader. unlocked bootloader has "r8A027" version.
Click to expand...
Click to collapse
Why not? i allready unlocked it
ChavitoArg said:
Why not? i allready unlocked it
Click to expand...
Click to collapse
Try to unlock it again. Your first unlock wasn't successful.
Guide: http://forum.xda-developers.com/showthread.php?t=1254225
Note: Guide also includes how to check if unlock of bootloader was successful.
Cheers ,
SpyderX
aZuZu said:
are you using patched loader?
Click to expand...
Click to collapse
Gbready root xrec,i think its patched
@blagus i dont have any bootloader
Related
I have big problem! I was installing stock version 2.3.4 on my neo thru flashtool and in middle of process i accidently unpluged cable ...now i have this problem evry time i try to flash:
26/035/2011 18:35:04 - INFO - Start Flashing
26/035/2011 18:35:05 - INFO - VER="R9A021";DATE="20110128";TIME="11:49:00";�
26/035/2011 18:35:05 - INFO - Flashing loader
26/035/2011 18:35:07 - INFO - Flashing adsp.sin
26/035/2011 18:35:10 - INFO - Flashing kernel.sin
26/035/2011 18:35:12 - INFO - Flashing amss_fs.sin
26/035/2011 18:35:13 - INFO - Flashing fota1.sin
26/035/2011 18:35:13 - INFO - Flashing fota0.sin
26/035/2011 18:35:14 - INFO - Flashing amss.sin
26/035/2011 18:35:23 - INFO - Flashing cache.sin
26/035/2011 18:35:24 - INFO - Flashing system.sin
26/037/2011 18:37:02 - ERROR - Error flashing. Aborted
26/037/2011 18:37:02 - INFO - Now unplug the device and power it on
26/037/2011 18:37:02 - INFO - Then go to application settings
26/037/2011 18:37:02 - INFO - turn on Unknown Sources and Debugging
i tried with other versions but nothing. does anyone knows the solution??
pls help tnx!
Check /uncheck "wipe data" ?
Try 2.3.3 then agen 2.3.4 ?
Rooted? Bootloader locked?
Sent from my MT15i using Tapatalk
i cant enter recovery!
i cant flash other versions it allways says that error aborted
and i was on CM
voltrrix said:
i cant enter recovery!
i cant flash other versions it allways says that error aborted
and i was on CM
Click to expand...
Click to collapse
Then use fastboot for flashing.
Sent from my MT15i using Tapatalk
i tryed but cant flash stock with fastboot
Wotanserver?
Or http://forum.xda-developers.com/showthread.php?t=1252019
Sent from my MT15i using Tapatalk
tnx ill try that!
taaviu said:
Check /uncheck "wipe data" ?
Try 2.3.3 then agen 2.3.4 ?
Rooted? Bootloader locked?
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
isn't there the danger of the infamous 0% battery?
sdk16420 said:
isn't there the danger of the infamous 0% battery?
Click to expand...
Click to collapse
NO. Because battery issue coming only when flashing back to 2.3.2.
Sent from my MT15i using Tapatalk
Here's the FTF Files for Neo V - Nordic
Part 1: http://www.mediafire.com/?9dera4tes44pa7d
Part 2: http://www.mediafire.com/?7ik510cq7cy2p62
You may use: HJ Split to join the FTF files
HJ Split: http://www.hjsplit.org/windows/
Will it work for locked bootloaders ?
Sent from my Turbocharged MT11i
Downloading !!!!.. No it wont need an Unloacked Bootloader.. Will Work on Locked Bootloaders
Can we use other kernel? And how to root this ics? Or it's already rooted?
Sent from my MT11i using XDA
Is it in English or in nordict languages ..........
And anyone tested it on NEO V ???
Please give us a brief review .....
I got this in flashtools:
14/034/2012 09:34:36 - INFO - Flashing adsp.sin
14/034/2012 09:34:39 - INFO - Flashing amss_fs_haida.sin
14/034/2012 09:34:39 - INFO - Flashing kernel.sin
14/034/2012 09:34:42 - INFO - Flashing fota1.sin
14/034/2012 09:34:43 - INFO - Flashing fota0.sin
14/034/2012 09:34:44 - INFO - Flashing apps_log.sin
14/034/2012 09:34:44 - INFO - Flashing amss.sin
14/034/2012 09:34:54 - INFO - Flashing cache.sin
14/034/2012 09:34:54 - INFO - Flashing system.sin
14/037/2012 09:37:17 - INFO - Flashing userdata.sin
14/037/2012 09:37:17 - ERROR - Error flashing. Aborted
14/037/2012 09:37:17 - INFO - Now unplug the device and power it on
14/037/2012 09:37:17 - INFO - Then go to application settings
14/037/2012 09:37:17 - INFO - turn on Unknown Sources and Debugging
wilsonchuchu said:
I got this in flashtools:
14/034/2012 09:34:36 - INFO - Flashing adsp.sin
14/034/2012 09:34:39 - INFO - Flashing amss_fs_haida.sin
14/034/2012 09:34:39 - INFO - Flashing kernel.sin
14/034/2012 09:34:42 - INFO - Flashing fota1.sin
14/034/2012 09:34:43 - INFO - Flashing fota0.sin
14/034/2012 09:34:44 - INFO - Flashing apps_log.sin
14/034/2012 09:34:44 - INFO - Flashing amss.sin
14/034/2012 09:34:54 - INFO - Flashing cache.sin
14/034/2012 09:34:54 - INFO - Flashing system.sin
14/037/2012 09:37:17 - INFO - Flashing userdata.sin
14/037/2012 09:37:17 - ERROR - Error flashing. Aborted
14/037/2012 09:37:17 - INFO - Now unplug the device and power it on
14/037/2012 09:37:17 - INFO - Then go to application settings
14/037/2012 09:37:17 - INFO - turn on Unknown Sources and Debugging
Click to expand...
Click to collapse
Someone reported to me that error earlier, just ignore them ... just boot up your phone...
kvroath said:
Can we use other kernel? And how to root this ics? Or it's already rooted?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Yes you can use other Kernel such as from NightElf_ICS-Beta-RC2_NOZRAM, and you can only do that if you do have an unlocked bootloader.
Here's a root fix for this ROM (this will only work if you have CWM installed)
http://www.mediafire.com/?c943rhixt7q9f88
how to root with unlocked boot loader?
archijit said:
how to root with unlocked boot loader?
Click to expand...
Click to collapse
install CWM first and download this SU fix
http://www.mediafire.com/?c943rhixt7q9f88
then flash it via CWM
Grateful if someone could create a cwm flashable zip (or atleast provide the system dump)..
DrearierJester1 said:
install CWM first and download this SU fix
http://www.mediafire.com/?c943rhixt7q9f88
then flash it via CWM
Click to expand...
Click to collapse
means flash night elf kernel to have CWM.
any other way to have cwm without changing kernel?
DrearierJester1 said:
Someone reported to me that error earlier, just ignore them ... just boot up your phone...
Click to expand...
Click to collapse
But I got bootloop
rom is overall smooth.
baseband .70
playing games is same as on beta version.
I have unlocked bootloader and CWM. How to flash this ROM?
Have changed lines in build.prop and updated via Pc Companion Works nice No data/app lost
I have locked BL and looking for root? Tried form latest FT but getting error.
archijit said:
means flash night elf kernel to have CWM.
any other way to have cwm without changing kernel?
Click to expand...
Click to collapse
nope
Flashed!! Working Fine Except Screen Info
it wasnt Working on MIUI Either,,but working in Beta,,, Whats Wrong with it....
can i flash this using flashtool??I have a locked bootloader and am on pure non rooted Stock?? This is the my first try at flashtool too..
puttytatko said:
can i flash this using flashtool on a locked bootloader???
Click to expand...
Click to collapse
YES
I have xperia x10 mini manufacturing date 10w40
Can i unlock my bootloader??
Please answer only if you are sure cause i dont wana brick my phone
Also tell me the easiest method to unlock my bootloader..
Or can i use any Rom on 2.3 without unlocking bootloader??
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
SmG67 said:
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
Click to expand...
Click to collapse
I'm getting Blue coloured Error "CANCELLED"
Why?
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
SmG67 said:
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
Click to expand...
Click to collapse
See here http://imageshack.us/photo/my-images/204/35480731.png/
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
SmG67 said:
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
Click to expand...
Click to collapse
18/000/2012 20:00:15 - INFO - <- This level is successfully initialized
18/000/2012 20:00:15 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
18/000/2012 20:00:15 - INFO - You can drag and drop ftf files here to start flashing them
18/000/2012 20:00:21 - INFO - Device connected with USB debugging on
18/000/2012 20:00:22 - INFO - Connected device : E10
18/000/2012 20:00:22 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:22 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:22 - INFO - Root Access Allowed
18/000/2012 20:00:35 - INFO - Device disconnected
18/000/2012 20:00:46 - INFO - Device connected with USB debugging on
18/000/2012 20:00:47 - INFO - Connected device : E10
18/000/2012 20:00:47 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:47 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:47 - INFO - Root Access Allowed
18/000/2012 20:00:53 - INFO - Please connect your device into flashmode.
18/000/2012 20:00:57 - INFO - Device disconnected
18/001/2012 20:01:27 - INFO - Device connected in flash mode
18/001/2012 20:01:28 - INFO - Opening device for R/W
18/001/2012 20:01:28 - INFO - Reading device information
18/001/2012 20:01:28 - INFO - Phone ready for flashmode operations.
18/001/2012 20:01:28 - INFO - Flashing loader
18/001/2012 20:01:28 - INFO - Ending flash session
18/001/2012 20:01:28 - WARN - Cancelled
18/001/2012 20:01:28 - INFO - Device connected in flash mode
18/001/2012 20:01:29 - INFO - Device disconnected
18/001/2012 20:01:32 - INFO - Device connected in flash mode
18/001/2012 20:01:35 - INFO - Device disconnected
Install busybox with flashtool, reboot your phone and try again
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
ok thanks wait don't go anywhere please i'm doing.
piousheart said:
ok thanks wait don't go anywhere please i'm doing.
Click to expand...
Click to collapse
lol i have to go to work in a few minutes, i'll check back later, but i think you'll be fine now (although i'm not entirely sure)
No success
What to do now? please help
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
Thanks!! I did it with manual method and. . .BoOM bootloader is unlocked.!!
Please confirm the following things.
1.Currently i'm on Built No-2.0.A.0.504,can i flash latest Latest 2.1.1.A.0.6 with unlocked bootloader?
2.Will nAa kernel will work with the stock 2.1.1.A.0.6 firmware (i will flash stock 2.1.1.A.0.6 firmware and then nAa kernel because i want to use miniCM 7)
Give rating to miniCM7 x\5
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
SmG67 said:
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
Click to expand...
Click to collapse
Process Started...wish me luck.!!
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
piousheart said:
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
Click to expand...
Click to collapse
SE don't like to see their firmware all over the internet, that's why all the links are dead.
SmG67 said:
SE don't like to see their firmware all over the internet, that's why all the links are dead, check your inbox
Click to expand...
Click to collapse
Thanks a ton for the link
But i download the 2.1.1.C.0.0 from some site and it worked.!!
Now going one step further..!!
Installed MiniCM 7 but now SD card not dected..
What to do??
piousheart said:
Installed MiniCM 7 but now SD card not dected..
What to do??
Click to expand...
Click to collapse
How is it not detected? by the phone itself?
Boot back into CWM and Wipe everything (wipe data/facotory reset, wipe cache, wipe dalvik-cache), and reboot see if that helps
In storage there is option to unmount SD card so phone is detecting SD card.
When i use Camera,gallery etc it says SD card not present
I tried factory reset,cache,delvic cache...but not working!!
but file manager like root explorer is working and sowing contents of SD card
i have mini pro x10 and after i unlock the bootloader and the root and install recovery i still dont the access to the recovery mode can u help me plzz
I don't know the combination mind however have you done the correct combination? Also if not then try re-flashing the recovery
Sent from my GT-I9100 using XDA
Tested more than one recovery, but i still dont the access to the recovery mode
WAHIP said:
Tested more than one recovery, but i still dont the access to the recovery mode
Click to expand...
Click to collapse
I suppose you use flashtool?
Could you show us the output when you connect your phone? That might be helpful
SmG67 said:
I suppose you use flashtool?
Could you show us the output when you connect your phone? That might be helpful
Click to expand...
Click to collapse
ok
24/021/2012 17:21:16 - INFO - <- This level is successfully initialized
24/021/2012 17:21:16 - INFO - Flashtool Version 0.8.0.0 built on 2012-05-27 21:57:12
24/021/2012 17:21:16 - INFO - You can drag and drop ftf files here to start flashing them
24/021/2012 17:21:24 - INFO - Device connected with USB debugging on
24/021/2012 17:21:26 - INFO - Connected device : U20
24/021/2012 17:21:26 - INFO - Installed version of busybox : N/A
24/021/2012 17:21:26 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
24/021/2012 17:21:26 - INFO - Root Access Allowed
Install busybox, reinstall xrecovery and see if it works then.
SmG67 said:
Install busybox, reinstall xrecovery and see if it works then.
Click to expand...
Click to collapse
Yeah agreed, that should do it
Sent from my GT-I9100 using XDA
trooperjohn said:
Yeah agreed, that should do it
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
iam do this but not worked
try the command
restart recovery
in some tool like Android terminal. might boot in if you forgot the combo keys.
From AdMoBiLe!::LGP698
I had flashed my sk17 with LX11.0 but I want to restore my old version of rom (LX10.1). I did a restore of old rom (I had small problems to start recovery but I did flash of some old kernel and after that flash with kernel from 10.1 and recovery started) with restore from recovery.
what is problem? now my proximity and light sensors are not working. during call display is always ON and auto brightnes is not working. what should I do next? :cyclops:
Try wipe cache and dalvik cache. If it doesn't work, wipe /data too.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
from recovery I wiped everything (cache, dalwik and data) and still no proximity and light sensor. after that I try to reflash kernel and the same thing is happening
is there some service menu for cyanogenmod? like sony one service menu just to check are sensors OK
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
ReznorNInchNails said:
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
Click to expand...
Click to collapse
I/m trying to flash stock ISC because it must be done but flashtool refuses to flash Now I don't know what to do next?
Can you post the error? Maybe it's broken download? Check file size.
Are you in flash mode (green led), or can you actually get in flash mode? Have you selected wipe cache, system, etc.?
If you can get into fastboot try to flash boot.img then flash CM11 and check developer options and test sensors.
Check this tutorial in case you missed something. http://talk.sonymobile.com/t5/Xperi...V-MT11i-2-3-4-update-4-0-2-A-0-62/td-p/134345
P.S. I heard that it is no go with Windows 8.1. If you use that, try with 7 or Linux in VBox.
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
22/018/2013 21:18:06 - INFO - <- This level is successfully initialized
22/018/2013 21:18:06 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
22/018/2013 21:18:06 - INFO - libusb version 1.0.17
22/018/2013 21:18:06 - INFO - Device disconnected
22/018/2013 21:18:32 - INFO - Selected SK17i / 4.1.B.0.587 / Customized_CE3
22/018/2013 21:18:33 - INFO - Preparing files for flashing
22/018/2013 21:18:53 - INFO - Please connect your device into flashmode.
22/019/2013 21:19:01 - INFO - Device connected in flash mode
22/019/2013 21:19:01 - INFO - Opening device for R/W
22/019/2013 21:19:01 - INFO - Device ready for R/W.
22/019/2013 21:19:01 - INFO - Reading device information
22/019/2013 21:19:02 - INFO - Phone ready for flashmode operations.
22/019/2013 21:19:02 - INFO - Current device : SK17i - BX902PDWPN - 1249-7382_R1I - 1244-7088_4.1.B.0.431 - WORLD-i_4.1.B.0.587
22/019/2013 21:19:02 - INFO - Start Flashing
22/019/2013 21:19:02 - INFO - Using an unofficial loader
22/019/2013 21:19:02 - INFO - Device loader has not been identified. Using the one from the bundle
22/019/2013 21:19:02 - INFO - Processing loader.sin
22/019/2013 21:19:02 - INFO - Checking header
22/019/2013 21:19:02 - INFO - Flashing data
22/019/2013 21:19:04 - INFO - Loader : S1_Loader_Root_773f - Version : R4A069 / Boot version : r9A029 / Bootloader status : ROOTED
22/019/2013 21:19:04 - INFO - Disabling final data verification check
22/019/2013 21:19:05 - INFO - Processing kernel.sin
22/019/2013 21:19:05 - INFO - Checking header
22/019/2013 21:19:05 - INFO - Ending flash session
22/019/2013 21:19:05 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
Click to expand...
Click to collapse
stefaca said:
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
Click to expand...
Click to collapse
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
mihahn said:
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
did that. this is error with verification OFF. flashtool started as root user. for me flashtool is unusable
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
dimitars84 said:
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
Click to expand...
Click to collapse
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
stefaca said:
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
Click to expand...
Click to collapse
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
dimitars84 said:
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
Click to expand...
Click to collapse
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
stefaca said:
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
Click to expand...
Click to collapse
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
dimitars84 said:
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
Click to expand...
Click to collapse
when I flash kernel with this method will I be able to flash whole stock ROM?
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
stefaca said:
when I flash kernel with this method will I be able to flash whole stock ROM?
Click to expand...
Click to collapse
Yes. First check if you get any error.
stefaca said:
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
Click to expand...
Click to collapse
I don't think this would be a problem, but better check in your section for other stock roms.