I had flashed my sk17 with LX11.0 but I want to restore my old version of rom (LX10.1). I did a restore of old rom (I had small problems to start recovery but I did flash of some old kernel and after that flash with kernel from 10.1 and recovery started) with restore from recovery.
what is problem? now my proximity and light sensors are not working. during call display is always ON and auto brightnes is not working. what should I do next? :cyclops:
Try wipe cache and dalvik cache. If it doesn't work, wipe /data too.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
from recovery I wiped everything (cache, dalwik and data) and still no proximity and light sensor. after that I try to reflash kernel and the same thing is happening
is there some service menu for cyanogenmod? like sony one service menu just to check are sensors OK
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
ReznorNInchNails said:
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
Click to expand...
Click to collapse
I/m trying to flash stock ISC because it must be done but flashtool refuses to flash Now I don't know what to do next?
Can you post the error? Maybe it's broken download? Check file size.
Are you in flash mode (green led), or can you actually get in flash mode? Have you selected wipe cache, system, etc.?
If you can get into fastboot try to flash boot.img then flash CM11 and check developer options and test sensors.
Check this tutorial in case you missed something. http://talk.sonymobile.com/t5/Xperi...V-MT11i-2-3-4-update-4-0-2-A-0-62/td-p/134345
P.S. I heard that it is no go with Windows 8.1. If you use that, try with 7 or Linux in VBox.
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
22/018/2013 21:18:06 - INFO - <- This level is successfully initialized
22/018/2013 21:18:06 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
22/018/2013 21:18:06 - INFO - libusb version 1.0.17
22/018/2013 21:18:06 - INFO - Device disconnected
22/018/2013 21:18:32 - INFO - Selected SK17i / 4.1.B.0.587 / Customized_CE3
22/018/2013 21:18:33 - INFO - Preparing files for flashing
22/018/2013 21:18:53 - INFO - Please connect your device into flashmode.
22/019/2013 21:19:01 - INFO - Device connected in flash mode
22/019/2013 21:19:01 - INFO - Opening device for R/W
22/019/2013 21:19:01 - INFO - Device ready for R/W.
22/019/2013 21:19:01 - INFO - Reading device information
22/019/2013 21:19:02 - INFO - Phone ready for flashmode operations.
22/019/2013 21:19:02 - INFO - Current device : SK17i - BX902PDWPN - 1249-7382_R1I - 1244-7088_4.1.B.0.431 - WORLD-i_4.1.B.0.587
22/019/2013 21:19:02 - INFO - Start Flashing
22/019/2013 21:19:02 - INFO - Using an unofficial loader
22/019/2013 21:19:02 - INFO - Device loader has not been identified. Using the one from the bundle
22/019/2013 21:19:02 - INFO - Processing loader.sin
22/019/2013 21:19:02 - INFO - Checking header
22/019/2013 21:19:02 - INFO - Flashing data
22/019/2013 21:19:04 - INFO - Loader : S1_Loader_Root_773f - Version : R4A069 / Boot version : r9A029 / Bootloader status : ROOTED
22/019/2013 21:19:04 - INFO - Disabling final data verification check
22/019/2013 21:19:05 - INFO - Processing kernel.sin
22/019/2013 21:19:05 - INFO - Checking header
22/019/2013 21:19:05 - INFO - Ending flash session
22/019/2013 21:19:05 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
Click to expand...
Click to collapse
stefaca said:
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
Click to expand...
Click to collapse
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
mihahn said:
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
did that. this is error with verification OFF. flashtool started as root user. for me flashtool is unusable
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
dimitars84 said:
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
Click to expand...
Click to collapse
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
stefaca said:
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
Click to expand...
Click to collapse
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
dimitars84 said:
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
Click to expand...
Click to collapse
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
stefaca said:
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
Click to expand...
Click to collapse
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
dimitars84 said:
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
Click to expand...
Click to collapse
when I flash kernel with this method will I be able to flash whole stock ROM?
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
stefaca said:
when I flash kernel with this method will I be able to flash whole stock ROM?
Click to expand...
Click to collapse
Yes. First check if you get any error.
stefaca said:
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
Click to expand...
Click to collapse
I don't think this would be a problem, but better check in your section for other stock roms.
Related
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
i am not responsible if you do it wrong
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
darky22 said:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool
http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
Click to expand...
Click to collapse
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
voyteckst said:
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
Click to expand...
Click to collapse
ok i should have mentioned that
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
sasa3342 said:
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
Click to expand...
Click to collapse
u can have other kernel like of nightelf and this fw is not prerooted,but if you have cwm u can use this to root
http://forum.xda-developers.com/showpost.php?p=24834920&postcount=26
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Pandemic said:
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Click to expand...
Click to collapse
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Aarush said:
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Click to expand...
Click to collapse
yeah but when i rename the kernel to boot.img and then the comment then says it error, what did you did ?
explain bro
Edit: never mind, i stay on supercharged 62 and relock my bl again.
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Click to expand...
Click to collapse
u can press the vol Down and power button a few seconds to take screenshot
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
ICS update via PC Companion on unlocked bootloader & custom kernel
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
sasa3342 said:
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
Click to expand...
Click to collapse
Depends on the way you unlocked boot loader,so what method you used?
Anyway why don't u flash with Flashtool ?
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
sasa3342 said:
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
Click to expand...
Click to collapse
Then you cannot use pc companion till you relock boot loader
How to re-lock boot loader
http://forum.xda-developers.com/showthread.php?t=1134335
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
sasa3342 said:
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
Click to expand...
Click to collapse
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
wilsonchuchu said:
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
Click to expand...
Click to collapse
yeah, it boots in ics , mentioned in the thread
darky22 said:
yeah, it boots in ics , mentioned in the thread
Click to expand...
Click to collapse
Yes, i tried to boot... and stuck in boot loop
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Try to flash night-elf kernel then go tp cwm to wipe data
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Night Elf's RC2 kernel
I have xperia x10 mini manufacturing date 10w40
Can i unlock my bootloader??
Please answer only if you are sure cause i dont wana brick my phone
Also tell me the easiest method to unlock my bootloader..
Or can i use any Rom on 2.3 without unlocking bootloader??
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
SmG67 said:
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
Click to expand...
Click to collapse
I'm getting Blue coloured Error "CANCELLED"
Why?
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
SmG67 said:
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
Click to expand...
Click to collapse
See here http://imageshack.us/photo/my-images/204/35480731.png/
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
SmG67 said:
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
Click to expand...
Click to collapse
18/000/2012 20:00:15 - INFO - <- This level is successfully initialized
18/000/2012 20:00:15 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
18/000/2012 20:00:15 - INFO - You can drag and drop ftf files here to start flashing them
18/000/2012 20:00:21 - INFO - Device connected with USB debugging on
18/000/2012 20:00:22 - INFO - Connected device : E10
18/000/2012 20:00:22 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:22 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:22 - INFO - Root Access Allowed
18/000/2012 20:00:35 - INFO - Device disconnected
18/000/2012 20:00:46 - INFO - Device connected with USB debugging on
18/000/2012 20:00:47 - INFO - Connected device : E10
18/000/2012 20:00:47 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:47 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:47 - INFO - Root Access Allowed
18/000/2012 20:00:53 - INFO - Please connect your device into flashmode.
18/000/2012 20:00:57 - INFO - Device disconnected
18/001/2012 20:01:27 - INFO - Device connected in flash mode
18/001/2012 20:01:28 - INFO - Opening device for R/W
18/001/2012 20:01:28 - INFO - Reading device information
18/001/2012 20:01:28 - INFO - Phone ready for flashmode operations.
18/001/2012 20:01:28 - INFO - Flashing loader
18/001/2012 20:01:28 - INFO - Ending flash session
18/001/2012 20:01:28 - WARN - Cancelled
18/001/2012 20:01:28 - INFO - Device connected in flash mode
18/001/2012 20:01:29 - INFO - Device disconnected
18/001/2012 20:01:32 - INFO - Device connected in flash mode
18/001/2012 20:01:35 - INFO - Device disconnected
Install busybox with flashtool, reboot your phone and try again
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
ok thanks wait don't go anywhere please i'm doing.
piousheart said:
ok thanks wait don't go anywhere please i'm doing.
Click to expand...
Click to collapse
lol i have to go to work in a few minutes, i'll check back later, but i think you'll be fine now (although i'm not entirely sure)
No success
What to do now? please help
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
Thanks!! I did it with manual method and. . .BoOM bootloader is unlocked.!!
Please confirm the following things.
1.Currently i'm on Built No-2.0.A.0.504,can i flash latest Latest 2.1.1.A.0.6 with unlocked bootloader?
2.Will nAa kernel will work with the stock 2.1.1.A.0.6 firmware (i will flash stock 2.1.1.A.0.6 firmware and then nAa kernel because i want to use miniCM 7)
Give rating to miniCM7 x\5
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
SmG67 said:
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
Click to expand...
Click to collapse
Process Started...wish me luck.!!
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
piousheart said:
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
Click to expand...
Click to collapse
SE don't like to see their firmware all over the internet, that's why all the links are dead.
SmG67 said:
SE don't like to see their firmware all over the internet, that's why all the links are dead, check your inbox
Click to expand...
Click to collapse
Thanks a ton for the link
But i download the 2.1.1.C.0.0 from some site and it worked.!!
Now going one step further..!!
Installed MiniCM 7 but now SD card not dected..
What to do??
piousheart said:
Installed MiniCM 7 but now SD card not dected..
What to do??
Click to expand...
Click to collapse
How is it not detected? by the phone itself?
Boot back into CWM and Wipe everything (wipe data/facotory reset, wipe cache, wipe dalvik-cache), and reboot see if that helps
In storage there is option to unmount SD card so phone is detecting SD card.
When i use Camera,gallery etc it says SD card not present
I tried factory reset,cache,delvic cache...but not working!!
but file manager like root explorer is working and sowing contents of SD card
I've bricked my Sony Xperia U by installing the wrong kernel.. (a kernel for the N700)
i know its stupid etc etc, but it only gives me a green light when i plug it into my pc.. it goes in flashmode automatic.
So i still can acces flashmode and fastboot mode.. what can i do know?
ive also tried to run this 'UnbrickingXperia2011.zip' over my phone, also tried stock firmware and stuff. nothing will work
Maybe you've got a solution?
Sorry for my bad grammatics or something, i\'m kinda high
Thanks in advance
THL
Flash your phone's stock ftf with flashtool if you can access flashmode.. If it's not working, post log of the error..
Sent from my ST27i
satan89 said:
Flash your phone's stock ftf with flashtool if you can access flashmode.. If it's not working, post log of the error..
Sent from my ST27i
Click to expand...
Click to collapse
Thanks for the quick respond!
I've done that a lot, it goes perfectly etc. but when i unplug and boot its still the same..
So i've tried to run UnbrickingXperia2011.zip and that gave me an error, but that is fixed as soon as i first flash the stock rom, and after that the UnbrickingXperia2011.zip it gives me no error but it doesnt do anything..
Edit: now the error also comes after i flashed the stock rom..
Anyone else?
Please?
I've copied the log:
(this is when trying to flash with UnbrickingXperia .ftf file)
27/037/2013 19:37:55 - INFO - <- This level is successfully initialized
27/037/2013 19:37:55 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/037/2013 19:37:55 - INFO - You can drag and drop ftf files here to start flashing them
27/038/2013 19:38:00 - INFO - Device disconnected
27/039/2013 19:39:23 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
27/039/2013 19:39:23 - INFO - Preparing files for flashing
27/039/2013 19:39:23 - INFO - Please connect your device into flashmode.
27/039/2013 19:39:28 - INFO - Device connected in flash mode
27/039/2013 19:39:28 - INFO - Opening device for R/W
27/039/2013 19:39:28 - INFO - Reading device information
27/039/2013 19:39:28 - INFO - Phone ready for flashmode operations.
27/039/2013 19:39:29 - INFO - Current device : ST25a - YT9002NM4S - 1265-2645_R3G - 1254-3522_6.1.1.B.1.10 - WORLD-a_6.1.1.B.1.10
27/039/2013 19:39:29 - INFO - Start Flashing
27/039/2013 19:39:29 - INFO - Processing loader
27/039/2013 19:39:29 - INFO - Checking header
27/039/2013 19:39:29 - INFO - Ending flash session
27/039/2013 19:39:29 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
Ok enter fastboot mode and fastboot any working kernel for your device (with cwm recovery if possible)
Sent from my ST27i
satan89 said:
(with cwm recovery if possible)
Sent from my ST27i
Click to expand...
Click to collapse
How can i acces cwm recovery if the phone can't boot?
(
Ok enter fastboot mode and fastboot any working kernel for your device
Click to expand...
Click to collapse
I've already tried that too. No errors blabla, but the phone didn't change
He says you should flash a kernel with CWM built in. After you've done this you can boot into recovery mode so you can flash any custom ROM you want.
TheHighLife said:
How can i acces cwm recovery if the phone can't boot?
(
I've already tried that too. No errors blabla, but the phone didn't change
Click to expand...
Click to collapse
I mean try fastboot of one of the working fxp boot.img.. It has recovery in the boot.img itself.
Sent from my ST27i
Naxiz said:
He says you should flash a kernel with CWM built in. After you've done this you can boot into recovery mode so you can flash any custom ROM you want.
Click to expand...
Click to collapse
Ohh okay, so it also works even if you can't get your phone 'on' (i can only get Fastboot and Flashmode)
Recovery will work even when the phone won't boot (if there is a working kernel installed).
Like this?
And then?
http://forum.xda-developers.com/showthread.php?t=1945744 < should i use this ?
I'm unable to view your attachments, but this is very easy. Just find yourself a kernel with CWM for your Xperia, then flash it using fastboot.
Start in recovery mode, find yourself a custom ROM for your Xperia and install it using CWM (recovery).
Naxiz said:
I'm unable to view your attachments, but this is very easy. Just find yourself a kernel with CWM for your Xperia, then flash it using fastboot.
Start in recovery mode, find yourself a custom ROM for your Xperia and install it using CWM (recovery).
Click to expand...
Click to collapse
First, before reading your reply i did this (attachment) hope you can see it now..
I'll try your way, is this a kernel with cwm for my xperia? i think so: http://forum.xda-developers.com/showthread.php?t=1945744
TheHighLife said:
Like this?
And then?
http://forum.xda-developers.com/showthread.php?t=1945744 < should i use this ?
Click to expand...
Click to collapse
That's the kernel you need, if your phone model is ST25.
But please notice the following:
No USB connection in recovery whatsoever (no adb, no USB mount etc.)
Click to expand...
Click to collapse
This means you CAN'T put any ROM on your sd card, so the ROM should already be placed on the sd card in order to install.
TheHighLife said:
Like this?
And then?
http://forum.xda-developers.com/showthread.php?t=1945744 < should i use this ?
Click to expand...
Click to collapse
What custom Rom is that in your screenshot?
Just get fxp 204 from here and fastboot only the boot.img which can be extracted from the zip file. It comes baked with cwm, you can use this to flash other roms.
I'm not sure about the cwm link you posted.
http://forum.xda-developers.com/showthread.php?t=1876927
Sent from my ST27i
First, before reading your reply i did this (attachment) hope you can see it now..
Click to expand...
Click to collapse
That's the right way. Use that command to install the kernel you linked, then boot into recovery to install the ROM that's already on your sd card using CWM (ROM must be in .zip format for CWM).
Naxiz said:
That's the right way. Use that command to install the kernel you linked, then boot into recovery to install the ROM that's already on your sd card using CWM (ROM must be in .zip format for CWM).
Click to expand...
Click to collapse
i've did that, everything went fine but the phone is still bricked
attachment:
TheHighLife said:
i've did that, everything went fine but the phone is still bricked
attachment:
Click to expand...
Click to collapse
Use the following command to restart your phone in CWM:
fastboot reboot recovery
Click to expand...
Click to collapse
Then install your new custom ROM.
If you're not able to get this working, maybe you should continue trying when you're not high.
satan89 said:
What custom Rom is that in your screenshot?
Just get fxp 204 from here and fastboot only the boot.img which can be extracted from the zip file. It comes baked with cwm, you can use this to flash other roms.
I'm not sure about the cwm link you posted.
http://forum.xda-developers.com/showthread.php?t=1876927
Sent from my ST27i
Click to expand...
Click to collapse
Already have that (attachment)
But the other guy says i already have a custom rom on it?
I flashed stock ICS .154 on Xperia sola
It worked alright
Then I fastbooted Munjeni CWM kernel
Phone was still working alright
But after I first time entered into CWM recovery mode
The phone is stuck in boot loop
ICS ROM does not start
I can go into CWM recovery
But I can't recover from CWM because the custom ROM installation freezes in AROMA
I can go into Flash and Fastboot modes
But I can't flash from Flashtool because the writing freezes in both modes
Also CWM shows error of unable to mount certain folders
So, while I have working CWM, Flash mode and Fastboot mode, but I am unable to flash/recover anything
Please, help!
threatalive said:
I flashed stock ICS .154 on Xperia sola
It worked alright
Then I fastbooted Munjeni CWM kernel
Phone was still working alright
But after I first time entered into CWM recovery mode
The phone is stuck in boot loop
ICS ROM does not start
I can go into CWM recovery
But I can't recover from CWM because the custom ROM installation freezes in AROMA
I can go into Flash and Fastboot modes
But I can't flash from Flashtool because the writing freezes in both modes
Also CWM shows error of unable to mount certain folders
So, while I have working CWM, Flash mode and Fastboot mode, but I am unable to flash/recover anything
Please, help!
Click to expand...
Click to collapse
First try wiping data, dalvik, cache using CWM and then restart....... if not then see below.....
do you have any ROM in SDCARD??? so that you can again install that from CWM......
and then flash the stock ftf file......
@[email protected] said:
First try wiping data, dalvik, cache using CWM and then restart....... if not then see below.....
do you have any ROM in SDCARD??? so that you can again install that from CWM......
and then flash the stock ftf file......
Click to expand...
Click to collapse
CWM gives error when trying to wipe data, dalvik, cache
I have a custom ROM on SD, but phone freezes during recovery in AROMA
And same is the case with Flashtool, it freezes during flashing when reading information from phone (both Flash and Fastboot modes)
threatalive said:
CWM gives error when trying to wipe data, dalvik, cache
I have a custom ROM on SD, but phone freezes during recovery in AROMA
And same is the case with Flashtool, it freezes during flashing when reading information from phone (both Flash and Fastboot modes)
Click to expand...
Click to collapse
one thing i can suggest is flash GB firmware using flashtool and see if that works....
@[email protected] said:
one thing i can suggest is flash GB firmware using flashtool and see if that works....
Click to expand...
Click to collapse
Same problem, flashtool gets stuck on 'reading phone information'
While SEUS is not detecting the phone
CWM is also not opening now
Here is the flashtool log when trying to flash any stock rom
Code:
24/059/2013 02:59:10 - INFO - <- This level is successfully initialized
24/059/2013 02:59:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/059/2013 02:59:10 - INFO - You can drag and drop ftf files here to start flashing them
24/059/2013 02:59:16 - INFO - Device connected in flash mode
24/059/2013 02:59:35 - INFO - Selected MT27i_6.0.B.3.184_ID.ftf
24/059/2013 02:59:35 - INFO - Preparing files for flashing
24/000/2013 03:00:23 - INFO - Please connect your device into flashmode.
24/000/2013 03:00:24 - INFO - Opening device for R/W
24/000/2013 03:00:24 - INFO - Reading device information
recently jwaop
threatalive said:
Here is the flashtool log when trying to flash any stock rom
Code:
24/059/2013 02:59:10 - INFO - <- This level is successfully initialized
24/059/2013 02:59:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/059/2013 02:59:10 - INFO - You can drag and drop ftf files here to start flashing them
24/059/2013 02:59:16 - INFO - Device connected in flash mode
24/059/2013 02:59:35 - INFO - Selected MT27i_6.0.B.3.184_ID.ftf
24/059/2013 02:59:35 - INFO - Preparing files for flashing
24/000/2013 03:00:23 - INFO - Please connect your device into flashmode.
24/000/2013 03:00:24 - INFO - Opening device for R/W
24/000/2013 03:00:24 - INFO - Reading device information
Click to expand...
Click to collapse
i have the same of problem did u fix it? and how??
threatalive said:
Here is the flashtool log when trying to flash any stock rom
Code:
24/059/2013 02:59:10 - INFO - <- This level is successfully initialized
24/059/2013 02:59:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/059/2013 02:59:10 - INFO - You can drag and drop ftf files here to start flashing them
24/059/2013 02:59:16 - INFO - Device connected in flash mode
24/059/2013 02:59:35 - INFO - Selected MT27i_6.0.B.3.184_ID.ftf
24/059/2013 02:59:35 - INFO - Preparing files for flashing
24/000/2013 03:00:23 - INFO - Please connect your device into flashmode.
24/000/2013 03:00:24 - INFO - Opening device for R/W
24/000/2013 03:00:24 - INFO - Reading device information
Click to expand...
Click to collapse
u can try this...First u select the. ftf file when flashtool asks u and open a window "how to connect ur phone in flashmode".then connect ur phone in flashmode. i had also faced this problem but my problem was not so complex
Good luck:thumbup:
Open the ftf in flashmode and wait until the connection windows
Maybe it will help
Sent from my Xperia P
I took a nandroid back up about a year ago and today when I restored it my phone gets stuck on the purple boot screen. How do I restore the stock rom?
Bootloader Unlocked
No DRM Keys
Nandroid Backup from twrp
I left it for about 2 hours straight....
Any help is appreciated
SirBottle said:
I took a nandroid back up about a year ago and today when I restored it my phone gets stuck on the purple boot screen. How do I restore the stock rom?
Bootloader Unlocked
No DRM Keys
Nandroid Backup from twrp
I left it for about 2 hours straight....
Any help is appreciated
Click to expand...
Click to collapse
If your previous rom was android 7 or 8 then you should flash stock rom first with flashtools then you can restore your backup
Don't forget to check all boxes of wipe section in flashtools
raminta said:
If your previous rom was android 7 or 8 then you should flash stock rom first with flashtools then you can restore your backup
Don't forget to check all boxes of wipe section in flashtools
Click to expand...
Click to collapse
I have a Sony z2 d6502 (India)
My previous stock rom was marshmallow 6.0.1
My phone is a d6502 but after flashing a custom rom (Resurrection Remix) Nougat, CPU-Z and Build.prop states that my variant is a d6503.Is that possible?
Also, I cannot flash any .ftf files on flashtool because of the bundle error.
The Sony FLASHTOOL log is given below:
21/024/2018 08:24:19 - INFO - Device disconnected
21/026/2018 08:26:47 - INFO - Selected Bundle for Sony Xperia Z2(D6503). FW release : 23.5.A.1.291. Customization : Customized UK
21/026/2018 08:26:47 - INFO - Preparing files for flashing
21/028/2018 08:28:04 - INFO - Please connect your device into flashmode.
21/030/2018 08:30:24 - INFO - Using Gordon gate drivers version 3.2.0.0
21/030/2018 08:30:24 - INFO - Opening device for R/W
21/030/2018 08:30:25 - INFO - Device ready for R/W.
21/030/2018 08:30:25 - INFO - Reading device information
21/030/2018 08:30:25 - INFO - Phone ready for flashmode operations.
21/030/2018 08:30:25 - INFO - Opening TA partition 2
21/030/2018 08:30:25 - INFO - Current device : Unknown: Jul 24 2016/19:28:59 - BH900X3A17 - Unknown: Jul 24 2016/19:28:59 - Unknown: Jul 24 2016/19:28:59 - GENERIC_23.5.A.1.291
21/030/2018 08:30:25 - INFO - Closing TA partition
21/030/2018 08:30:25 - ERROR - The bundle does not match the connected device
21/030/2018 08:30:25 - INFO - Ending flash session
21/030/2018 08:30:26 - INFO - Device disconnected
Also, flashtool is not able to detect my phone even though ADB and Unknown Sources are on , I also installed all the required drivers.
Is it because of the Custom Rom or the variant of my phone?
Just a reminder, my phones variant changed from d6502 to d6503 after resurrection remix......
I don't have a TA partition.....
I already when thought this forum
https://forum.xda-developers.com/z3/help/bundle-match-connected-device-t3749226
SirBottle said:
I have a Sony z2 d6502 (India)
My previous stock rom was marshmallow 6.0.1
My phone is a d6502 but after flashing a custom rom (Resurrection Remix) Nougat, CPU-Z and Build.prop states that my variant is a d6503.Is that possible?
Also, I cannot flash any .ftf files on flashtool because of the bundle error.
The Sony FLASHTOOL log is given below:
21/024/2018 08:24:19 - INFO - Device disconnected
21/026/2018 08:26:47 - INFO - Selected Bundle for Sony Xperia Z2(D6503). FW release : 23.5.A.1.291. Customization : Customized UK
21/026/2018 08:26:47 - INFO - Preparing files for flashing
21/028/2018 08:28:04 - INFO - Please connect your device into flashmode.
21/030/2018 08:30:24 - INFO - Using Gordon gate drivers version 3.2.0.0
21/030/2018 08:30:24 - INFO - Opening device for R/W
21/030/2018 08:30:25 - INFO - Device ready for R/W.
21/030/2018 08:30:25 - INFO - Reading device information
21/030/2018 08:30:25 - INFO - Phone ready for flashmode operations.
21/030/2018 08:30:25 - INFO - Opening TA partition 2
21/030/2018 08:30:25 - INFO - Current device : Unknown: Jul 24 2016/19:28:59 - BH900X3A17 - Unknown: Jul 24 2016/19:28:59 - Unknown: Jul 24 2016/19:28:59 - GENERIC_23.5.A.1.291
21/030/2018 08:30:25 - INFO - Closing TA partition
21/030/2018 08:30:25 - ERROR - The bundle does not match the connected device
21/030/2018 08:30:25 - INFO - Ending flash session
21/030/2018 08:30:26 - INFO - Device disconnected
Also, flashtool is not able to detect my phone even though ADB and Unknown Sources are on , I also installed all the required drivers.
Is it because of the Custom Rom or the variant of my phone?
Just a reminder, my phones variant changed from d6502 to d6503 after resurrection remix......
I don't have a TA partition.....
I already when thought this forum
https://forum.xda-developers.com/z3/help/bundle-match-connected-device-t3749226
Click to expand...
Click to collapse
Which version of flashtools are you using???
Use older versions like 0.9.18.x or 0.9.19.x
They may solve the problem
raminta said:
Which version of flashtools are you using???
Use older versions like 0.9.18.x or 0.9.19.x
They may solve the problem
Click to expand...
Click to collapse
Issue 1:
When I flash it, it gives error-root bundle is not valid
Is it a .ftf issue?
Issue 2:
Flashtool Log:
Checking Root Access
Root access denied
I already have magisk installed on my Sony z2.
SirBottle said:
Issue 1:
When I flash it, it gives error-root bundle is not valid
Is it a .ftf issue?
Issue 2:
Flashtool Log:
Checking Root Access
Root access denied
I already have magisk installed on my Sony z2.
Click to expand...
Click to collapse
Issue 1: maybe it is from ftf file but i don't think so
As i said use older versions of flashtools
Issue 2: that will not make any problem and it is not important
raminta said:
Issue 1: maybe it is from ftf file but i don't think so
As i said use older versions of flashtools
Issue 2: that will not make any problem and it is not important
Click to expand...
Click to collapse
I am using 0.9.18.6 (flashtool Version).. Should I install another FTF file if so, which variant do I choose (d6502 or d6503) or should I just try both?
Just wondering I still cant restore TWRP backup with system and boot backed up (It just gets stuck on the purple boot screen the waves one)
SirBottle said:
I am using 0.9.18.6 (flashtool Version).. Should I install another FTF file if so, which variant do I choose (d6502 or d6503) or should I just try both?
Just wondering I still cant restore TWRP backup with system and boot backed up (It just gets stuck on the purple boot screen the waves one)
Click to expand...
Click to collapse
choose d6502 and yes change FTF file
the problem with TWRP backup is because of the nought version of RR that you flashed and now you want to back to stock based rom so you should flash stock rom with flashtools and wipe everything
raminta said:
choose d6502 and yes change FTF file
the problem with TWRP backup is because of the nought version of RR that you flashed and now you want to back to stock based rom so you should flash stock rom with flashtools and wipe everything
Click to expand...
Click to collapse
Thanks So Much!!!!
:good::victory:
I got the stock rom installed on my phone it works flawlessly!
Is there any way to root marshmallow 6.0.1 on sony z2
SirBottle said:
I got the stock rom installed on my phone it works flawlessly!
But, for some reason I can't load twrp using adb.
Adb says it is successful but for some reason pressing power down or power up does not boot into twrp.
Click to expand...
Click to collapse
Flash elite kernel version 3
It has built-in recovery (TWRP)
raminta said:
Flash elite kernel version 3
It has built-in recovery (TWRP)
Click to expand...
Click to collapse
I realized I made a dumb mistake on my part..
Anyways is there a root for sony z2 6.0.1 firmware .291
Thanks
SirBottle said:
I realized I made a dumb mistake on my part..
Anyways is there a root for sony z2 6.0.1 firmware .291
Thanks
Click to expand...
Click to collapse
I think flashing Super SU using recovery should be enough
SirBottle said:
I got the stock rom installed on my phone it works flawlessly!
Is there any way to root marshmallow 6.0.1 on sony z2
Click to expand...
Click to collapse
here
Hafyzy said:
here
Click to expand...
Click to collapse
I have a d6502 variant,is it okay if I flash a D6503 Kernel on it?
SirBottle said:
I have a d6502 variant,is it okay if I flash a D6503 Kernel on it?
Click to expand...
Click to collapse
yes you can ...