[Q] sola boot loop, cwm, flash & fastboot working, but no recovery - Sony Xperia P, U, Sola, Go

I flashed stock ICS .154 on Xperia sola
It worked alright
Then I fastbooted Munjeni CWM kernel
Phone was still working alright
But after I first time entered into CWM recovery mode
The phone is stuck in boot loop
ICS ROM does not start
I can go into CWM recovery
But I can't recover from CWM because the custom ROM installation freezes in AROMA
I can go into Flash and Fastboot modes
But I can't flash from Flashtool because the writing freezes in both modes
Also CWM shows error of unable to mount certain folders
So, while I have working CWM, Flash mode and Fastboot mode, but I am unable to flash/recover anything
Please, help!

threatalive said:
I flashed stock ICS .154 on Xperia sola
It worked alright
Then I fastbooted Munjeni CWM kernel
Phone was still working alright
But after I first time entered into CWM recovery mode
The phone is stuck in boot loop
ICS ROM does not start
I can go into CWM recovery
But I can't recover from CWM because the custom ROM installation freezes in AROMA
I can go into Flash and Fastboot modes
But I can't flash from Flashtool because the writing freezes in both modes
Also CWM shows error of unable to mount certain folders
So, while I have working CWM, Flash mode and Fastboot mode, but I am unable to flash/recover anything
Please, help!
Click to expand...
Click to collapse
First try wiping data, dalvik, cache using CWM and then restart....... if not then see below.....
do you have any ROM in SDCARD??? so that you can again install that from CWM......
and then flash the stock ftf file......

@[email protected] said:
First try wiping data, dalvik, cache using CWM and then restart....... if not then see below.....
do you have any ROM in SDCARD??? so that you can again install that from CWM......
and then flash the stock ftf file......
Click to expand...
Click to collapse
CWM gives error when trying to wipe data, dalvik, cache
I have a custom ROM on SD, but phone freezes during recovery in AROMA
And same is the case with Flashtool, it freezes during flashing when reading information from phone (both Flash and Fastboot modes)

threatalive said:
CWM gives error when trying to wipe data, dalvik, cache
I have a custom ROM on SD, but phone freezes during recovery in AROMA
And same is the case with Flashtool, it freezes during flashing when reading information from phone (both Flash and Fastboot modes)
Click to expand...
Click to collapse
one thing i can suggest is flash GB firmware using flashtool and see if that works....

@[email protected] said:
one thing i can suggest is flash GB firmware using flashtool and see if that works....
Click to expand...
Click to collapse
Same problem, flashtool gets stuck on 'reading phone information'
While SEUS is not detecting the phone
CWM is also not opening now

Here is the flashtool log when trying to flash any stock rom
Code:
24/059/2013 02:59:10 - INFO - <- This level is successfully initialized
24/059/2013 02:59:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/059/2013 02:59:10 - INFO - You can drag and drop ftf files here to start flashing them
24/059/2013 02:59:16 - INFO - Device connected in flash mode
24/059/2013 02:59:35 - INFO - Selected MT27i_6.0.B.3.184_ID.ftf
24/059/2013 02:59:35 - INFO - Preparing files for flashing
24/000/2013 03:00:23 - INFO - Please connect your device into flashmode.
24/000/2013 03:00:24 - INFO - Opening device for R/W
24/000/2013 03:00:24 - INFO - Reading device information

recently jwaop
threatalive said:
Here is the flashtool log when trying to flash any stock rom
Code:
24/059/2013 02:59:10 - INFO - <- This level is successfully initialized
24/059/2013 02:59:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/059/2013 02:59:10 - INFO - You can drag and drop ftf files here to start flashing them
24/059/2013 02:59:16 - INFO - Device connected in flash mode
24/059/2013 02:59:35 - INFO - Selected MT27i_6.0.B.3.184_ID.ftf
24/059/2013 02:59:35 - INFO - Preparing files for flashing
24/000/2013 03:00:23 - INFO - Please connect your device into flashmode.
24/000/2013 03:00:24 - INFO - Opening device for R/W
24/000/2013 03:00:24 - INFO - Reading device information
Click to expand...
Click to collapse
i have the same of problem did u fix it? and how??

threatalive said:
Here is the flashtool log when trying to flash any stock rom
Code:
24/059/2013 02:59:10 - INFO - <- This level is successfully initialized
24/059/2013 02:59:10 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
24/059/2013 02:59:10 - INFO - You can drag and drop ftf files here to start flashing them
24/059/2013 02:59:16 - INFO - Device connected in flash mode
24/059/2013 02:59:35 - INFO - Selected MT27i_6.0.B.3.184_ID.ftf
24/059/2013 02:59:35 - INFO - Preparing files for flashing
24/000/2013 03:00:23 - INFO - Please connect your device into flashmode.
24/000/2013 03:00:24 - INFO - Opening device for R/W
24/000/2013 03:00:24 - INFO - Reading device information
Click to expand...
Click to collapse
u can try this...First u select the. ftf file when flashtool asks u and open a window "how to connect ur phone in flashmode".then connect ur phone in flashmode. i had also faced this problem but my problem was not so complex
Good luck:thumbup:

Open the ftf in flashmode and wait until the connection windows
Maybe it will help
Sent from my Xperia P

Related

How to flash ICS(noob guide)

1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
i am not responsible if you do it wrong
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
darky22 said:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool
http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
Click to expand...
Click to collapse
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
voyteckst said:
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
Click to expand...
Click to collapse
ok i should have mentioned that
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
sasa3342 said:
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
Click to expand...
Click to collapse
u can have other kernel like of nightelf and this fw is not prerooted,but if you have cwm u can use this to root
http://forum.xda-developers.com/showpost.php?p=24834920&postcount=26
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Pandemic said:
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Click to expand...
Click to collapse
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Aarush said:
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Click to expand...
Click to collapse
yeah but when i rename the kernel to boot.img and then the comment then says it error, what did you did ?
explain bro
Edit: never mind, i stay on supercharged 62 and relock my bl again.
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Click to expand...
Click to collapse
u can press the vol Down and power button a few seconds to take screenshot
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
ICS update via PC Companion on unlocked bootloader & custom kernel
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
sasa3342 said:
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
Click to expand...
Click to collapse
Depends on the way you unlocked boot loader,so what method you used?
Anyway why don't u flash with Flashtool ?
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
sasa3342 said:
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
Click to expand...
Click to collapse
Then you cannot use pc companion till you relock boot loader
How to re-lock boot loader
http://forum.xda-developers.com/showthread.php?t=1134335
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
sasa3342 said:
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
Click to expand...
Click to collapse
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
wilsonchuchu said:
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
Click to expand...
Click to collapse
yeah, it boots in ics , mentioned in the thread
darky22 said:
yeah, it boots in ics , mentioned in the thread
Click to expand...
Click to collapse
Yes, i tried to boot... and stuck in boot loop
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Try to flash night-elf kernel then go tp cwm to wipe data
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Night Elf's RC2 kernel

[Q] Come back to stock with Unlocked bootloader

I Have this problem, and He give me the solution!
Firstly, you need Flashtool. You can get it from here
http://forum.xda-developers.com/show....php?t=1351309
Secondly, you need an ftf file for your phone.
http://forum.xda-developers.com/showthread.php?t=1477440
Now, flash the ftf file on your phone using Flashtool.
thanks to meumangarora
Yeah, yhu can go back to stock by Flashing with Flashtool, dnt try to update using SEUS or PCC.........! get ftf file for yur mobile.
samu1player said:
I have a custom rom and a custom kernel, and unlocked bootloader.. Can I conect my phone to pcc and flash the original rom?
Please I need help, wotanserver isn´t free.. I don't know how to return to stock
Click to expand...
Click to collapse
Yes you can. Firstly, you need Flashtool. You can get it from here
http://forum.xda-developers.com/showthread.php?t=1351309
Secondly, you need an ftf file for your phone. Download the Stock ROM from here
http://forum.xda-developers.com/showthread.php?t=1477440
Now, flash the ftf file on your phone using Flashtool. Flashtool will itself write the new kernal no need to worry about that
meumangarora said:
Yes you can. Firstly, you need Flashtool. You can get it from here
http://forum.xda-developers.com/showthread.php?t=1351309
Secondly, you need an ftf file for your phone. Download the Stock ROM from here
http://forum.xda-developers.com/showthread.php?t=1477440
Now, flash the ftf file on your phone using Flashtool. Flashtool will itself write the new kernal no need to worry about that
Click to expand...
Click to collapse
Hi, i have the same problem... custom kernel and rom and i already downloaded flashtool and the stock rom in ftf but the problem is taht when i put mi xperia in flashmode (green led) it stays fine for exactly 40 seconds and then it reboot to the charging battery mode when its turned off and i dont wanna start flashing the stock rom until the phone stay conected in flashmode for more than 40 secs or i think it would get bricked because a desconnection in the middle of the flashing of my rom.
would you be so kind and helpme please?? im a noob and bad at english
samu1player said:
I have a custom rom and a custom kernel, and unlocked bootloader.. Can I conect my phone to pcc and flash the original rom?
Please I need help, wotanserver isn´t free.. I don't know how to return to stock
Click to expand...
Click to collapse
u better go to this thread, i have tested unlock n relock bootloader
http://forum.xda-developers.com/showthread.php?t=1560613
thanks! It Works! u Rock! I Go to put these information
PHAMTOMLIVEiv said:
Hi, i have the same problem... custom kernel and rom and i already downloaded flashtool and the stock rom in ftf but the problem is taht when i put mi xperia in flashmode (green led) it stays fine for exactly 40 seconds and then it reboot to the charging battery mode when its turned off and i dont wanna start flashing the stock rom until the phone stay conected in flashmode for more than 40 secs or i think it would get bricked because a desconnection in the middle of the flashing of my rom.
would you be so kind and helpme please?? im a noob and bad at english
Click to expand...
Click to collapse
Try Doing all steps first, and after, when flashtool show you the request to enter in flashmode, do it! xD In my device it works!
returning to stock with unlock bootloader
Sorry, tried many times to do that and the flashtool has an error messege:
Current device : WT19i - BX902U194P - 1254-9461_R2I - 1250-5521_4.1.B.0.431 - WORLD-a_4.1.B.0.587
21/047/2013 01:47:49 - INFO - Start Flashing
21/047/2013 01:47:49 - INFO - Processing loader
21/047/2013 01:47:49 - INFO - Using an unofficial loader
21/047/2013 01:47:49 - INFO - Ending flash session
21/047/2013 01:47:49 - ERROR - C:\Flashtool\devices\WT19\loader_unlocked.sin (El sistema no puede encontrar el archivo especificado)
21/047/2013 01:47:49 - ERROR - Error flashing. Aborted
21/047/2013 01:47:49 - INFO - Device connected in flash mode
21/047/2013 01:47:51 - INFO - Device disconnected
21/047/2013 01:47:52 - INFO - Device connected in flash mode
Please, I need to reinstall stock kernel on my lww with unlock bootloader
eli_porto said:
Sorry, tried many times to do that and the flashtool has an error messege:
Current device : WT19i - BX902U194P - 1254-9461_R2I - 1250-5521_4.1.B.0.431 - WORLD-a_4.1.B.0.587
21/047/2013 01:47:49 - INFO - Start Flashing
21/047/2013 01:47:49 - INFO - Processing loader
21/047/2013 01:47:49 - INFO - Using an unofficial loader
21/047/2013 01:47:49 - INFO - Ending flash session
21/047/2013 01:47:49 - ERROR - C:\Flashtool\devices\WT19\loader_unlocked.sin (El sistema no puede encontrar el archivo especificado)
21/047/2013 01:47:49 - ERROR - Error flashing. Aborted
21/047/2013 01:47:49 - INFO - Device connected in flash mode
21/047/2013 01:47:51 - INFO - Device disconnected
21/047/2013 01:47:52 - INFO - Device connected in flash mode
Please, I need to reinstall stock kernel on my lww with unlock bootloader
Click to expand...
Click to collapse
This error is due to some missing files...try reinstallinh all the drivers and then flash if it still gives the error try flashing with older version(I recommend 0.6.8.0) and install it drivers, then flash...
Regards,
AJ
Sent from my SK17i using Tapatalk 2

Can't return to stock .587 from FXP146 (CM10)

Hi, whenever I am trying to flash the stock Xperia_Mini_ST15i_4.1.B.0.587 ftf using flashtool, I am encountering the following error. Below is the error
Code:
16/017/2012 23:17:44 - INFO - <- This level is successfully initialized
16/017/2012 23:17:44 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
16/017/2012 23:17:44 - INFO - You can drag and drop ftf files here to start flashing them
16/017/2012 23:17:49 - INFO - Device disconnected
16/017/2012 23:17:55 - INFO - Device connected in flash mode
16/018/2012 23:18:00 - INFO - Selected Xperia Mini (ST15i)_4.1.B.0.587.ftf
16/018/2012 23:18:00 - INFO - Preparing files for flashing
16/018/2012 23:18:15 - INFO - Please connect your device into flashmode.
16/018/2012 23:18:16 - INFO - Opening device for R/W
16/018/2012 23:18:16 - INFO - Reading device information
16/018/2012 23:18:36 - INFO - Start Flashing
16/018/2012 23:18:36 - INFO - Processing loader
16/018/2012 23:18:36 - INFO - Checking header
16/018/2012 23:18:36 - INFO - Ending flash session
16/018/2012 23:18:36 - ERROR -
16/018/2012 23:18:36 - ERROR - Error flashing. Aborted
16/018/2012 23:18:36 - INFO - Device connected in flash mode
16/018/2012 23:18:37 - INFO - Device disconnected
I am currently using FXP 146 with MESA Kernel 2.3... Please help ..
Hmmmm...You should make Nandroid backup (stock .587) first before you flash FXP Roms....if you do then you have no problem restoring back to stock....
since you didn't make Nandroid backup, i suggest you flash stock kernel or custom kernel base on ICS (i recommended Mesa Kernel ICS v2.2)...after flashing kernel then try flashing stock roms....
Pusak Gaoq said:
Hmmmm...You should make Nandroid backup (stock .587) first before you flash FXP Roms....if you do then you have no problem restoring back to stock....
Click to expand...
Click to collapse
Does nandroid backup actually backup the kernel? From what I can see in my cwm backup folder, it doesn't seem to include kernel
tonasc said:
Does nandroid backup actually backup the kernel? From what I can see in my cwm backup folder, it doesn't seem to include kernel
Click to expand...
Click to collapse
No it doesn't backup kernel but restoring from CWM is much easy than flashing stock ROM using flashtool....
Sent Using iPusak Gaoq™
Problem solved... It was connecting the phone before Flashtool started the flashing process... Need to connect the phone when it pops up asking to connect the phone....

Unlocked boot loader or not ?

Hi am a galaxy ace user, my brother has a x10, he wants to install a jb rom. but i dont know if the phone has bootloader unlocked or not. so i want help.
S1 boot version has r8A033. Does that mean the boot loader is unlocked ??
can i install cwm without problems and then jb??
Lijop said:
Hi am a galaxy ace user, my brother has a x10, he wants to install a jb rom. but i dont know if the phone has bootloader unlocked or not. so i want help.
S1 boot version has r8A033. Does that mean the boot loader is unlocked ??
can i install cwm without problems and then jb??
Click to expand...
Click to collapse
Yes. R=locked and r=unlocked. Good luck with your flashing:thumbup:
Guys i really have a big problem. pls help. stuck at boot logo after installing the the 4.0 kernel from scritch. was on 2.3. installed the kernel, but stuck at boot logo. what should i do now ?
LOG
30/020/2013 16:20:45 - INFO - Selected X10_4.0.4_scritch_BootManager_v5.ftf
30/020/2013 16:20:45 - INFO - Preparing files for flashing
30/020/2013 16:20:45 - INFO - Please connect your device into flashmode.
30/020/2013 16:20:58 - INFO - Device connected with USB debugging on
30/021/2013 16:21:00 - INFO - Connected device : X10
30/021/2013 16:21:01 - INFO - Installed version of busybox : BusyBox v1.19.0.git.adrynalyne (2010-12-21 22:03:30 MST) multi-call binary.
30/021/2013 16:21:01 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-00054-g5f01537 / Build number : 3.0.1.G.0.75
30/021/2013 16:21:01 - INFO - Device disconnected
30/021/2013 16:21:33 - INFO - Opening device for R/W
30/021/2013 16:21:33 - INFO - Start Flashing
30/021/2013 16:21:33 - INFO - Processing loader
30/021/2013 16:21:33 - INFO - Checking header
30/021/2013 16:21:33 - INFO - Ending flash session
Guys please help
download latest scritch cm10 kernel v21 + rom v9.5 testing from here :
http://wuala.com/CMX10-Android/Testing/?id=21,1909229,13-387,2245286,15
copy rom to sd card, flash kernel via flashtool ... when you see blue light blinks keep pressing back button to enter CWM ... then wipe data and caches and install the rom
Islam Looca said:
download latest scritch cm10 kernel v21 + rom v9.5 testing from here :
http://wuala.com/CMX10-Android/Testing/?id=21,1909229,13-387,2245286,15
copy rom to sd card, flash kernel via flashtool ... when you see blue light blinks keep pressing back button to enter CWM ... then wipe data and caches and install the rom
Click to expand...
Click to collapse
Thanks mate, saved my phone. Now on JB.
Sent from my GT-S5830 using xda premium

display is ON during call (sk17i)

I had flashed my sk17 with LX11.0 but I want to restore my old version of rom (LX10.1). I did a restore of old rom (I had small problems to start recovery but I did flash of some old kernel and after that flash with kernel from 10.1 and recovery started) with restore from recovery.
what is problem? now my proximity and light sensors are not working. during call display is always ON and auto brightnes is not working. what should I do next? :cyclops:
Try wipe cache and dalvik cache. If it doesn't work, wipe /data too.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
from recovery I wiped everything (cache, dalwik and data) and still no proximity and light sensor. after that I try to reflash kernel and the same thing is happening
is there some service menu for cyanogenmod? like sony one service menu just to check are sensors OK
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
ReznorNInchNails said:
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
Click to expand...
Click to collapse
I/m trying to flash stock ISC because it must be done but flashtool refuses to flash Now I don't know what to do next?
Can you post the error? Maybe it's broken download? Check file size.
Are you in flash mode (green led), or can you actually get in flash mode? Have you selected wipe cache, system, etc.?
If you can get into fastboot try to flash boot.img then flash CM11 and check developer options and test sensors.
Check this tutorial in case you missed something. http://talk.sonymobile.com/t5/Xperi...V-MT11i-2-3-4-update-4-0-2-A-0-62/td-p/134345
P.S. I heard that it is no go with Windows 8.1. If you use that, try with 7 or Linux in VBox.
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
22/018/2013 21:18:06 - INFO - <- This level is successfully initialized
22/018/2013 21:18:06 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
22/018/2013 21:18:06 - INFO - libusb version 1.0.17
22/018/2013 21:18:06 - INFO - Device disconnected
22/018/2013 21:18:32 - INFO - Selected SK17i / 4.1.B.0.587 / Customized_CE3
22/018/2013 21:18:33 - INFO - Preparing files for flashing
22/018/2013 21:18:53 - INFO - Please connect your device into flashmode.
22/019/2013 21:19:01 - INFO - Device connected in flash mode
22/019/2013 21:19:01 - INFO - Opening device for R/W
22/019/2013 21:19:01 - INFO - Device ready for R/W.
22/019/2013 21:19:01 - INFO - Reading device information
22/019/2013 21:19:02 - INFO - Phone ready for flashmode operations.
22/019/2013 21:19:02 - INFO - Current device : SK17i - BX902PDWPN - 1249-7382_R1I - 1244-7088_4.1.B.0.431 - WORLD-i_4.1.B.0.587
22/019/2013 21:19:02 - INFO - Start Flashing
22/019/2013 21:19:02 - INFO - Using an unofficial loader
22/019/2013 21:19:02 - INFO - Device loader has not been identified. Using the one from the bundle
22/019/2013 21:19:02 - INFO - Processing loader.sin
22/019/2013 21:19:02 - INFO - Checking header
22/019/2013 21:19:02 - INFO - Flashing data
22/019/2013 21:19:04 - INFO - Loader : S1_Loader_Root_773f - Version : R4A069 / Boot version : r9A029 / Bootloader status : ROOTED
22/019/2013 21:19:04 - INFO - Disabling final data verification check
22/019/2013 21:19:05 - INFO - Processing kernel.sin
22/019/2013 21:19:05 - INFO - Checking header
22/019/2013 21:19:05 - INFO - Ending flash session
22/019/2013 21:19:05 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
Click to expand...
Click to collapse
stefaca said:
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
Click to expand...
Click to collapse
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
mihahn said:
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
did that. this is error with verification OFF. flashtool started as root user. for me flashtool is unusable
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
dimitars84 said:
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
Click to expand...
Click to collapse
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
stefaca said:
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
Click to expand...
Click to collapse
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
dimitars84 said:
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
Click to expand...
Click to collapse
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
stefaca said:
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
Click to expand...
Click to collapse
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
dimitars84 said:
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
Click to expand...
Click to collapse
when I flash kernel with this method will I be able to flash whole stock ROM?
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
stefaca said:
when I flash kernel with this method will I be able to flash whole stock ROM?
Click to expand...
Click to collapse
Yes. First check if you get any error.
stefaca said:
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
Click to expand...
Click to collapse
I don't think this would be a problem, but better check in your section for other stock roms.

Categories

Resources