1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
i am not responsible if you do it wrong
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
darky22 said:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool
http://www.4shared.com/file/Ot3fyDJf/flashtool-0670-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
new links :1.http://www.mediafire.com/?7ik510cq7cy2p62
2.http://www.mediafire.com/?9dera4tes44pa7d
if you feel it was worth reading hit the thanks button
Click to expand...
Click to collapse
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
voyteckst said:
Uncheck wipe data is enough to preservere data. Wipe cache should be rather enabled.
Click to expand...
Click to collapse
ok i should have mentioned that
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
sasa3342 said:
I have unlocked bootloader with nightelf kernel + CWM. Do I need stock kernel to flash this ROM? Is it rooted?
Click to expand...
Click to collapse
u can have other kernel like of nightelf and this fw is not prerooted,but if you have cwm u can use this to root
http://forum.xda-developers.com/showpost.php?p=24834920&postcount=26
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Pandemic said:
no my phone will not restart in ICS i got an error, sony and then error, and i cant flash the kernel in fastboot mode :S
i have unlocked bl
Click to expand...
Click to collapse
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Aarush said:
In my case
I flashed, didn't boot, tried many times, but still didn't boot
So i flashed night elf kernel through fastboot, entered recovery wiped everything
Then it booted normally!
Hope it helped
Click to expand...
Click to collapse
yeah but when i rename the kernel to boot.img and then the comment then says it error, what did you did ?
explain bro
Edit: never mind, i stay on supercharged 62 and relock my bl again.
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Hi all, i was on stock 4.0.2.A.0.62, flashed just as said in first post, unchecked wipe data and everything is just awsome, works like a charm for now.
I can't thank you enough for your instructions guys!
Just 2 questions:
1. How to take screenshot on ICS
2. There is no Sony Contact widget?
TNX a lot!
Click to expand...
Click to collapse
u can press the vol Down and power button a few seconds to take screenshot
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
ICS update via PC Companion on unlocked bootloader & custom kernel
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
sasa3342 said:
I have unlocked bootloader with custom kernel (nightelf) on my phone. Can I update neo V via PC Companion without consequences?
Click to expand...
Click to collapse
Depends on the way you unlocked boot loader,so what method you used?
Anyway why don't u flash with Flashtool ?
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
sasa3342 said:
I don't know... Just asking.
Official method, via SE unlocking bootloader site.
Click to expand...
Click to collapse
Then you cannot use pc companion till you relock boot loader
How to re-lock boot loader
http://forum.xda-developers.com/showthread.php?t=1134335
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
sasa3342 said:
I followed these instructions:
1. Download FTF needed http://www.mediafire.com/?o4v5ttaqsjhv3aq
2. Download Flashtool http://www.4shared.com/file/Ot3fyDJf...0-windows.html
3.install flashtool , install the drivers inside the flashtool
4. put the FTF you downloaded in the firmware folder where the flashtool is installed
5. Enable usb debuggin and switch off your phone
6.click on the FLASH icon on flashtool window,choose flashmode
7. if you want to keep your apps and data, uncheck wipe cache and data,its better if you check it but you will lose your data
8.follow the onscreen instructions , it will tell you when and how to connect your phone
9. you will get error at 99%, but your phone will start in ICS...
10. Enjoy
And i got this:
15/008/2012 05:08:56 - INFO - Flashing adsp.sin
15/008/2012 05:08:59 - INFO - Flashing amss_fs_haida.sin
15/008/2012 05:08:59 - INFO - Flashing kernel.sin
15/009/2012 05:09:02 - INFO - Flashing fota1.sin
15/009/2012 05:09:03 - INFO - Flashing fota0.sin
15/009/2012 05:09:04 - INFO - Flashing apps_log.sin
15/009/2012 05:09:04 - INFO - Flashing amss.sin
15/009/2012 05:09:14 - INFO - Flashing cache.sin
15/009/2012 05:09:14 - INFO - Flashing system.sin
15/011/2012 05:11:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
15/011/2012 05:11:34 - ERROR - Error flashing. Aborted
Solution?
Click to expand...
Click to collapse
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
wilsonchuchu said:
Did u try to boot?
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
Click to expand...
Click to collapse
yeah, it boots in ics , mentioned in the thread
darky22 said:
yeah, it boots in ics , mentioned in the thread
Click to expand...
Click to collapse
Yes, i tried to boot... and stuck in boot loop
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Try to flash night-elf kernel then go tp cwm to wipe data
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
sasa3342 said:
Yes, i tried to boot... and stuck in boot loop
Click to expand...
Click to collapse
Night Elf's RC2 kernel
Related
I Have this problem, and He give me the solution!
Firstly, you need Flashtool. You can get it from here
http://forum.xda-developers.com/show....php?t=1351309
Secondly, you need an ftf file for your phone.
http://forum.xda-developers.com/showthread.php?t=1477440
Now, flash the ftf file on your phone using Flashtool.
thanks to meumangarora
Yeah, yhu can go back to stock by Flashing with Flashtool, dnt try to update using SEUS or PCC.........! get ftf file for yur mobile.
samu1player said:
I have a custom rom and a custom kernel, and unlocked bootloader.. Can I conect my phone to pcc and flash the original rom?
Please I need help, wotanserver isn´t free.. I don't know how to return to stock
Click to expand...
Click to collapse
Yes you can. Firstly, you need Flashtool. You can get it from here
http://forum.xda-developers.com/showthread.php?t=1351309
Secondly, you need an ftf file for your phone. Download the Stock ROM from here
http://forum.xda-developers.com/showthread.php?t=1477440
Now, flash the ftf file on your phone using Flashtool. Flashtool will itself write the new kernal no need to worry about that
meumangarora said:
Yes you can. Firstly, you need Flashtool. You can get it from here
http://forum.xda-developers.com/showthread.php?t=1351309
Secondly, you need an ftf file for your phone. Download the Stock ROM from here
http://forum.xda-developers.com/showthread.php?t=1477440
Now, flash the ftf file on your phone using Flashtool. Flashtool will itself write the new kernal no need to worry about that
Click to expand...
Click to collapse
Hi, i have the same problem... custom kernel and rom and i already downloaded flashtool and the stock rom in ftf but the problem is taht when i put mi xperia in flashmode (green led) it stays fine for exactly 40 seconds and then it reboot to the charging battery mode when its turned off and i dont wanna start flashing the stock rom until the phone stay conected in flashmode for more than 40 secs or i think it would get bricked because a desconnection in the middle of the flashing of my rom.
would you be so kind and helpme please?? im a noob and bad at english
samu1player said:
I have a custom rom and a custom kernel, and unlocked bootloader.. Can I conect my phone to pcc and flash the original rom?
Please I need help, wotanserver isn´t free.. I don't know how to return to stock
Click to expand...
Click to collapse
u better go to this thread, i have tested unlock n relock bootloader
http://forum.xda-developers.com/showthread.php?t=1560613
thanks! It Works! u Rock! I Go to put these information
PHAMTOMLIVEiv said:
Hi, i have the same problem... custom kernel and rom and i already downloaded flashtool and the stock rom in ftf but the problem is taht when i put mi xperia in flashmode (green led) it stays fine for exactly 40 seconds and then it reboot to the charging battery mode when its turned off and i dont wanna start flashing the stock rom until the phone stay conected in flashmode for more than 40 secs or i think it would get bricked because a desconnection in the middle of the flashing of my rom.
would you be so kind and helpme please?? im a noob and bad at english
Click to expand...
Click to collapse
Try Doing all steps first, and after, when flashtool show you the request to enter in flashmode, do it! xD In my device it works!
returning to stock with unlock bootloader
Sorry, tried many times to do that and the flashtool has an error messege:
Current device : WT19i - BX902U194P - 1254-9461_R2I - 1250-5521_4.1.B.0.431 - WORLD-a_4.1.B.0.587
21/047/2013 01:47:49 - INFO - Start Flashing
21/047/2013 01:47:49 - INFO - Processing loader
21/047/2013 01:47:49 - INFO - Using an unofficial loader
21/047/2013 01:47:49 - INFO - Ending flash session
21/047/2013 01:47:49 - ERROR - C:\Flashtool\devices\WT19\loader_unlocked.sin (El sistema no puede encontrar el archivo especificado)
21/047/2013 01:47:49 - ERROR - Error flashing. Aborted
21/047/2013 01:47:49 - INFO - Device connected in flash mode
21/047/2013 01:47:51 - INFO - Device disconnected
21/047/2013 01:47:52 - INFO - Device connected in flash mode
Please, I need to reinstall stock kernel on my lww with unlock bootloader
eli_porto said:
Sorry, tried many times to do that and the flashtool has an error messege:
Current device : WT19i - BX902U194P - 1254-9461_R2I - 1250-5521_4.1.B.0.431 - WORLD-a_4.1.B.0.587
21/047/2013 01:47:49 - INFO - Start Flashing
21/047/2013 01:47:49 - INFO - Processing loader
21/047/2013 01:47:49 - INFO - Using an unofficial loader
21/047/2013 01:47:49 - INFO - Ending flash session
21/047/2013 01:47:49 - ERROR - C:\Flashtool\devices\WT19\loader_unlocked.sin (El sistema no puede encontrar el archivo especificado)
21/047/2013 01:47:49 - ERROR - Error flashing. Aborted
21/047/2013 01:47:49 - INFO - Device connected in flash mode
21/047/2013 01:47:51 - INFO - Device disconnected
21/047/2013 01:47:52 - INFO - Device connected in flash mode
Please, I need to reinstall stock kernel on my lww with unlock bootloader
Click to expand...
Click to collapse
This error is due to some missing files...try reinstallinh all the drivers and then flash if it still gives the error try flashing with older version(I recommend 0.6.8.0) and install it drivers, then flash...
Regards,
AJ
Sent from my SK17i using Tapatalk 2
I have xperia x10 mini manufacturing date 10w40
Can i unlock my bootloader??
Please answer only if you are sure cause i dont wana brick my phone
Also tell me the easiest method to unlock my bootloader..
Or can i use any Rom on 2.3 without unlocking bootloader??
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
SmG67 said:
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
Click to expand...
Click to collapse
I'm getting Blue coloured Error "CANCELLED"
Why?
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
SmG67 said:
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
Click to expand...
Click to collapse
See here http://imageshack.us/photo/my-images/204/35480731.png/
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
SmG67 said:
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
Click to expand...
Click to collapse
18/000/2012 20:00:15 - INFO - <- This level is successfully initialized
18/000/2012 20:00:15 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
18/000/2012 20:00:15 - INFO - You can drag and drop ftf files here to start flashing them
18/000/2012 20:00:21 - INFO - Device connected with USB debugging on
18/000/2012 20:00:22 - INFO - Connected device : E10
18/000/2012 20:00:22 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:22 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:22 - INFO - Root Access Allowed
18/000/2012 20:00:35 - INFO - Device disconnected
18/000/2012 20:00:46 - INFO - Device connected with USB debugging on
18/000/2012 20:00:47 - INFO - Connected device : E10
18/000/2012 20:00:47 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:47 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:47 - INFO - Root Access Allowed
18/000/2012 20:00:53 - INFO - Please connect your device into flashmode.
18/000/2012 20:00:57 - INFO - Device disconnected
18/001/2012 20:01:27 - INFO - Device connected in flash mode
18/001/2012 20:01:28 - INFO - Opening device for R/W
18/001/2012 20:01:28 - INFO - Reading device information
18/001/2012 20:01:28 - INFO - Phone ready for flashmode operations.
18/001/2012 20:01:28 - INFO - Flashing loader
18/001/2012 20:01:28 - INFO - Ending flash session
18/001/2012 20:01:28 - WARN - Cancelled
18/001/2012 20:01:28 - INFO - Device connected in flash mode
18/001/2012 20:01:29 - INFO - Device disconnected
18/001/2012 20:01:32 - INFO - Device connected in flash mode
18/001/2012 20:01:35 - INFO - Device disconnected
Install busybox with flashtool, reboot your phone and try again
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
ok thanks wait don't go anywhere please i'm doing.
piousheart said:
ok thanks wait don't go anywhere please i'm doing.
Click to expand...
Click to collapse
lol i have to go to work in a few minutes, i'll check back later, but i think you'll be fine now (although i'm not entirely sure)
No success
What to do now? please help
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
Thanks!! I did it with manual method and. . .BoOM bootloader is unlocked.!!
Please confirm the following things.
1.Currently i'm on Built No-2.0.A.0.504,can i flash latest Latest 2.1.1.A.0.6 with unlocked bootloader?
2.Will nAa kernel will work with the stock 2.1.1.A.0.6 firmware (i will flash stock 2.1.1.A.0.6 firmware and then nAa kernel because i want to use miniCM 7)
Give rating to miniCM7 x\5
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
SmG67 said:
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
Click to expand...
Click to collapse
Process Started...wish me luck.!!
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
piousheart said:
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
Click to expand...
Click to collapse
SE don't like to see their firmware all over the internet, that's why all the links are dead.
SmG67 said:
SE don't like to see their firmware all over the internet, that's why all the links are dead, check your inbox
Click to expand...
Click to collapse
Thanks a ton for the link
But i download the 2.1.1.C.0.0 from some site and it worked.!!
Now going one step further..!!
Installed MiniCM 7 but now SD card not dected..
What to do??
piousheart said:
Installed MiniCM 7 but now SD card not dected..
What to do??
Click to expand...
Click to collapse
How is it not detected? by the phone itself?
Boot back into CWM and Wipe everything (wipe data/facotory reset, wipe cache, wipe dalvik-cache), and reboot see if that helps
In storage there is option to unmount SD card so phone is detecting SD card.
When i use Camera,gallery etc it says SD card not present
I tried factory reset,cache,delvic cache...but not working!!
but file manager like root explorer is working and sowing contents of SD card
I've bricked my Sony Xperia U by installing the wrong kernel.. (a kernel for the N700)
i know its stupid etc etc, but it only gives me a green light when i plug it into my pc.. it goes in flashmode automatic.
So i still can acces flashmode and fastboot mode.. what can i do know?
ive also tried to run this 'UnbrickingXperia2011.zip' over my phone, also tried stock firmware and stuff. nothing will work
Maybe you've got a solution?
Sorry for my bad grammatics or something, i\'m kinda high
Thanks in advance
THL
Flash your phone's stock ftf with flashtool if you can access flashmode.. If it's not working, post log of the error..
Sent from my ST27i
satan89 said:
Flash your phone's stock ftf with flashtool if you can access flashmode.. If it's not working, post log of the error..
Sent from my ST27i
Click to expand...
Click to collapse
Thanks for the quick respond!
I've done that a lot, it goes perfectly etc. but when i unplug and boot its still the same..
So i've tried to run UnbrickingXperia2011.zip and that gave me an error, but that is fixed as soon as i first flash the stock rom, and after that the UnbrickingXperia2011.zip it gives me no error but it doesnt do anything..
Edit: now the error also comes after i flashed the stock rom..
Anyone else?
Please?
I've copied the log:
(this is when trying to flash with UnbrickingXperia .ftf file)
27/037/2013 19:37:55 - INFO - <- This level is successfully initialized
27/037/2013 19:37:55 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
27/037/2013 19:37:55 - INFO - You can drag and drop ftf files here to start flashing them
27/038/2013 19:38:00 - INFO - Device disconnected
27/039/2013 19:39:23 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
27/039/2013 19:39:23 - INFO - Preparing files for flashing
27/039/2013 19:39:23 - INFO - Please connect your device into flashmode.
27/039/2013 19:39:28 - INFO - Device connected in flash mode
27/039/2013 19:39:28 - INFO - Opening device for R/W
27/039/2013 19:39:28 - INFO - Reading device information
27/039/2013 19:39:28 - INFO - Phone ready for flashmode operations.
27/039/2013 19:39:29 - INFO - Current device : ST25a - YT9002NM4S - 1265-2645_R3G - 1254-3522_6.1.1.B.1.10 - WORLD-a_6.1.1.B.1.10
27/039/2013 19:39:29 - INFO - Start Flashing
27/039/2013 19:39:29 - INFO - Processing loader
27/039/2013 19:39:29 - INFO - Checking header
27/039/2013 19:39:29 - INFO - Ending flash session
27/039/2013 19:39:29 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
Ok enter fastboot mode and fastboot any working kernel for your device (with cwm recovery if possible)
Sent from my ST27i
satan89 said:
(with cwm recovery if possible)
Sent from my ST27i
Click to expand...
Click to collapse
How can i acces cwm recovery if the phone can't boot?
(
Ok enter fastboot mode and fastboot any working kernel for your device
Click to expand...
Click to collapse
I've already tried that too. No errors blabla, but the phone didn't change
He says you should flash a kernel with CWM built in. After you've done this you can boot into recovery mode so you can flash any custom ROM you want.
TheHighLife said:
How can i acces cwm recovery if the phone can't boot?
(
I've already tried that too. No errors blabla, but the phone didn't change
Click to expand...
Click to collapse
I mean try fastboot of one of the working fxp boot.img.. It has recovery in the boot.img itself.
Sent from my ST27i
Naxiz said:
He says you should flash a kernel with CWM built in. After you've done this you can boot into recovery mode so you can flash any custom ROM you want.
Click to expand...
Click to collapse
Ohh okay, so it also works even if you can't get your phone 'on' (i can only get Fastboot and Flashmode)
Recovery will work even when the phone won't boot (if there is a working kernel installed).
Like this?
And then?
http://forum.xda-developers.com/showthread.php?t=1945744 < should i use this ?
I'm unable to view your attachments, but this is very easy. Just find yourself a kernel with CWM for your Xperia, then flash it using fastboot.
Start in recovery mode, find yourself a custom ROM for your Xperia and install it using CWM (recovery).
Naxiz said:
I'm unable to view your attachments, but this is very easy. Just find yourself a kernel with CWM for your Xperia, then flash it using fastboot.
Start in recovery mode, find yourself a custom ROM for your Xperia and install it using CWM (recovery).
Click to expand...
Click to collapse
First, before reading your reply i did this (attachment) hope you can see it now..
I'll try your way, is this a kernel with cwm for my xperia? i think so: http://forum.xda-developers.com/showthread.php?t=1945744
TheHighLife said:
Like this?
And then?
http://forum.xda-developers.com/showthread.php?t=1945744 < should i use this ?
Click to expand...
Click to collapse
That's the kernel you need, if your phone model is ST25.
But please notice the following:
No USB connection in recovery whatsoever (no adb, no USB mount etc.)
Click to expand...
Click to collapse
This means you CAN'T put any ROM on your sd card, so the ROM should already be placed on the sd card in order to install.
TheHighLife said:
Like this?
And then?
http://forum.xda-developers.com/showthread.php?t=1945744 < should i use this ?
Click to expand...
Click to collapse
What custom Rom is that in your screenshot?
Just get fxp 204 from here and fastboot only the boot.img which can be extracted from the zip file. It comes baked with cwm, you can use this to flash other roms.
I'm not sure about the cwm link you posted.
http://forum.xda-developers.com/showthread.php?t=1876927
Sent from my ST27i
First, before reading your reply i did this (attachment) hope you can see it now..
Click to expand...
Click to collapse
That's the right way. Use that command to install the kernel you linked, then boot into recovery to install the ROM that's already on your sd card using CWM (ROM must be in .zip format for CWM).
Naxiz said:
That's the right way. Use that command to install the kernel you linked, then boot into recovery to install the ROM that's already on your sd card using CWM (ROM must be in .zip format for CWM).
Click to expand...
Click to collapse
i've did that, everything went fine but the phone is still bricked
attachment:
TheHighLife said:
i've did that, everything went fine but the phone is still bricked
attachment:
Click to expand...
Click to collapse
Use the following command to restart your phone in CWM:
fastboot reboot recovery
Click to expand...
Click to collapse
Then install your new custom ROM.
If you're not able to get this working, maybe you should continue trying when you're not high.
satan89 said:
What custom Rom is that in your screenshot?
Just get fxp 204 from here and fastboot only the boot.img which can be extracted from the zip file. It comes baked with cwm, you can use this to flash other roms.
I'm not sure about the cwm link you posted.
http://forum.xda-developers.com/showthread.php?t=1876927
Sent from my ST27i
Click to expand...
Click to collapse
Already have that (attachment)
But the other guy says i already have a custom rom on it?
Hello there xda comunity,
I am facing a big problem with my xperia p.
Running stock ROM, stock firmware 6.2.A.1.100, rooted my phone by doomlord method and ulocked bootloader not via flashtool, but via other flashtool provided in unlock guidance on official sony website.
everything was working fine until I installed One Power Guard and it totally messed up my phone. Apps started to force close randomly (contacts,album,messages,android.acore etc.) showing annoying popups every single second making me unable even to answer a phone call.
and here comes to problem. I was trying to restore to factory settings, but after a reboot, phone seems to recover into some point without any reason or my permission and everything is as it was before restart. Even if I uninstall some app or take a photo and I reboot, the app is back and photo nowhere.
I was trying to flash new kernel via flashtool, but it says TOO MANY BAD BLOCKS and end with a failure, so it seems like that particular partition is damaged somehow and I cant get over it. I managed to mount my internal storage, so I was able to see it as mass storage on my desktop pc and tried to format and repair bad sectors. Test outcome said, there is no problem. I was very surprised when I reboted phone, all data was still there, so no format really happened.
when I try to flash new firmware, everythings go ok until it comes to the point READING DEVICE INFORMATION. It stucks there for eternity.
I have installed all drivera provided with flashtool and I am able to smoothly go to fast boot mode or flashmode but it is all I can really do, because as I said I cant flash kernel, nor firmware.
So what am I supposed to do? Any help?
hi
so if u can go fastboot u can flash kernel...bcuz system is not loaded and phone partially off
u unlocked bl so pcc never again till u relock it lil advice loll
same thing for flashmode so or else u flash an ftf wich gonna clean the phone or u flash a custom kernel with cwm from there u wipe cache partition, dalvik cache , data factory reset then u go to mount ...u format system and caches u go back flashtool and flash an clean ftf
when u there at ftf flash untick TA partition on right side and final verification
take another custom kernel maybe u took one corrupted it could be te reason of that
sent with my perfexperia P using tapatalktak 2
Alx31TLse said:
hi
so if u can go fastboot u can flash kernel...bcuz system is not loaded and phone partially off
u unlocked bl so pcc never again till u relock it lil advice loll
same thing for flashmode so or else u flash an ftf wich gonna clean the phone or u flash a custom kernel with cwm from there u wipe cache partition, dalvik cache , data factory reset then u go to mount ...u format system and caches u go back flashtool and flash an clean ftf
when u there at ftf flash untick TA partition on right side and final verification
take another custom kernel maybe u took one corrupted it could be te reason of that
sent with my perfexperia P using tapatalktak 2
Click to expand...
Click to collapse
not really
when I try to relock my bootloader, or to flash new firmware, it always looks like this
15/048/2013 19:48:42 - INFO - Selected LT22i(P) / xperia.cz / relock_bootloader
15/048/2013 19:48:42 - INFO - Preparing files for flashing
15/048/2013 19:48:42 - INFO - Please connect your device into flashmode.
15/048/2013 19:48:48 - INFO - Device connected in flash mode
15/048/2013 19:48:48 - INFO - Opening device for R/W
15/048/2013 19:48:48 - INFO - Reading device information
it stuck at reading device information 4ever
this how it looks when i try to flash kernel
15/057/2013 19:57:05 - INFO - Device connected in fastboot mode
15/057/2013 19:57:14 - INFO - Selected kernel (boot.img or kernel.sin): C:\2\nemesis.elf
15/057/2013 19:57:14 - INFO - HotBooting selected kernel
15/057/2013 19:57:14 - INFO - FASTBOOT Output:
creating boot image...
creating boot image - 5791744 bytes
downloading 'boot.img'...
(bootloader) USB download speed was 21691kB/s
OKAY [ 0.278s]
booting...
FAILED (remote: Wrong range:0x10008000-0x1058d687. Ok:0x00000000-0x05efffff)
finished. total time: 0.286s
15/057/2013 19:57:16 - INFO - Device disconnected
I was trying different kernel...always the same :crying:
hum wich option r u choosing in flashtool?
for fw and kernel tell me what u choosin step by step please
then do u still have a cwm installed?
sent with my perfexperia P using tapatalktak 2
Alx31TLse said:
hum wich option r u choosing in flashtool?
for fw and kernel tell me what u choosin step by step please
then do u still have a cwm installed?
sent with my perfexperia P using tapatalktak 2
Click to expand...
Click to collapse
for FW
flashtool > bootmode chooser > flashmode
then I choose FW e.g. 6.2.A.1.100 Central Europe or 6.1.1.B1.54 Sony
I exclude TA and final verification and the result is always the same it stucks at READING DEVICE INFORMATION
for kernel
flashtool > bootmode chooser > fastboot mode
here I was trying both methods - Selecet kernel to HotBoot | Select kernel to flash, none of them works
I found myself unable to relock bootloader via flashtool
it says my device cannot be unlocked, but it already is unlocked and device can be unlocked as it says on service menu (right now it says bootloader unlocked = yes)
I think that I somehow messed up my partitions or deleted partition table....Is there some way to rebuilt device partitions, so I am able to flash again? The number of bad blocks (error when trying to flash kernel) is the exact number of all blocks on my sdcard.
I Think that rebuilding device partition table is the solution, but idk how.....
skynetko said:
for FW
flashtool > bootmode chooser > flashmode
then I choose FW e.g. 6.2.A.1.100 Central Europe or 6.1.1.B1.54 Sony
I exclude TA and final verification and the result is always the same it stucks at READING DEVICE INFORMATION
for kernel
flashtool > bootmode chooser > fastboot mode
here I was trying both methods - Selecet kernel to HotBoot | Select kernel to flash, none of them works
I found myself unable to relock bootloader via flashtool
it says my device cannot be unlocked, but it already is unlocked and device can be unlocked as it says on service menu (right now it says bootloader unlocked = yes)
I think that I somehow messed up my partitions or deleted partition table....Is there some way to rebuilt device partitions, so I am able to flash again? The number of bad blocks (error when trying to flash kernel) is the exact number of all blocks on my sdcard.
I Think that rebuilding device partition table is the solution, but idk how.....
Click to expand...
Click to collapse
Then sorry bro i have no clue! i would like to say if u still have access to cwm; format everything in mounts and storage and make data/factory reset...
maybe someone else gonna give u more ideas...when u have troubles u flash ftf and everythings come back but u, u are deep into it!
i assume too the rom doesn t load...cuz u can still flash an ftf in zip file from cwm
I had flashed my sk17 with LX11.0 but I want to restore my old version of rom (LX10.1). I did a restore of old rom (I had small problems to start recovery but I did flash of some old kernel and after that flash with kernel from 10.1 and recovery started) with restore from recovery.
what is problem? now my proximity and light sensors are not working. during call display is always ON and auto brightnes is not working. what should I do next? :cyclops:
Try wipe cache and dalvik cache. If it doesn't work, wipe /data too.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
from recovery I wiped everything (cache, dalwik and data) and still no proximity and light sensor. after that I try to reflash kernel and the same thing is happening
is there some service menu for cyanogenmod? like sony one service menu just to check are sensors OK
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
ReznorNInchNails said:
I don't know, I'm not using restore option because I had problems with it in the past.
You can try to enable developer menu in Settings>About Phone>Tap several times on Build Number until you see You are developer and you will see new menu in settings, and try also stock ROM to see if problem persist there.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
Click to expand...
Click to collapse
I/m trying to flash stock ISC because it must be done but flashtool refuses to flash Now I don't know what to do next?
Can you post the error? Maybe it's broken download? Check file size.
Are you in flash mode (green led), or can you actually get in flash mode? Have you selected wipe cache, system, etc.?
If you can get into fastboot try to flash boot.img then flash CM11 and check developer options and test sensors.
Check this tutorial in case you missed something. http://talk.sonymobile.com/t5/Xperi...V-MT11i-2-3-4-update-4-0-2-A-0-62/td-p/134345
P.S. I heard that it is no go with Windows 8.1. If you use that, try with 7 or Linux in VBox.
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
22/018/2013 21:18:06 - INFO - <- This level is successfully initialized
22/018/2013 21:18:06 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
22/018/2013 21:18:06 - INFO - libusb version 1.0.17
22/018/2013 21:18:06 - INFO - Device disconnected
22/018/2013 21:18:32 - INFO - Selected SK17i / 4.1.B.0.587 / Customized_CE3
22/018/2013 21:18:33 - INFO - Preparing files for flashing
22/018/2013 21:18:53 - INFO - Please connect your device into flashmode.
22/019/2013 21:19:01 - INFO - Device connected in flash mode
22/019/2013 21:19:01 - INFO - Opening device for R/W
22/019/2013 21:19:01 - INFO - Device ready for R/W.
22/019/2013 21:19:01 - INFO - Reading device information
22/019/2013 21:19:02 - INFO - Phone ready for flashmode operations.
22/019/2013 21:19:02 - INFO - Current device : SK17i - BX902PDWPN - 1249-7382_R1I - 1244-7088_4.1.B.0.431 - WORLD-i_4.1.B.0.587
22/019/2013 21:19:02 - INFO - Start Flashing
22/019/2013 21:19:02 - INFO - Using an unofficial loader
22/019/2013 21:19:02 - INFO - Device loader has not been identified. Using the one from the bundle
22/019/2013 21:19:02 - INFO - Processing loader.sin
22/019/2013 21:19:02 - INFO - Checking header
22/019/2013 21:19:02 - INFO - Flashing data
22/019/2013 21:19:04 - INFO - Loader : S1_Loader_Root_773f - Version : R4A069 / Boot version : r9A029 / Bootloader status : ROOTED
22/019/2013 21:19:04 - INFO - Disabling final data verification check
22/019/2013 21:19:05 - INFO - Processing kernel.sin
22/019/2013 21:19:05 - INFO - Checking header
22/019/2013 21:19:05 - INFO - Ending flash session
22/019/2013 21:19:05 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="SIN_HEAD_VER";ERR_DYNAMIC="Failed to verify sin header";
Click to expand...
Click to collapse
stefaca said:
I had downloaded 3 tft (different stock roms) and everytime I got different error. laptop has windows8 but errors are the same on xp also.
I can flash legacyXperia11 but does it have service menu to test sensors?
here is log from flashtool from linux machine:
Click to expand...
Click to collapse
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
mihahn said:
Did you try checking "no final verification" in flashtool?
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
did that. this is error with verification OFF. flashtool started as root user. for me flashtool is unusable
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
dimitars84 said:
There are apps for checking proximity sensor. Try searching Hardware Sensors or similar.
Click to expand...
Click to collapse
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
stefaca said:
light sensors is stuck at 0lux and proxy sensor just do nothing all of that just stop after back from CM11
Click to expand...
Click to collapse
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
dimitars84 said:
Use flashtool to flash ftf for your phone. Check proximity and light sensor are working in stock firmware.
Click to expand...
Click to collapse
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
stefaca said:
a few posts ago I posted error from flashtool. I can't flash stock tft. please if you can help me
Click to expand...
Click to collapse
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
dimitars84 said:
I somehow skipped that post, sorry. Try using older version of flashtool, like 0.9.11 see here: https://unrestrict.li/flashtool
If its same result then try this:
1. extract ftf (in linux you will have extract option, in windows I think it will work if you change the extension ftf to zip, then extract)
2. go into the extracted folder with cmd
3. connect your phone to pc in fastboot mode
3. if you set the PATH for fastboot then just do "fastboot flash boot kernel.sin"
- if not, copy kernel.sin to your ./platform-tools folder and use the same command
write if you get an error
Click to expand...
Click to collapse
when I flash kernel with this method will I be able to flash whole stock ROM?
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
stefaca said:
when I flash kernel with this method will I be able to flash whole stock ROM?
Click to expand...
Click to collapse
Yes. First check if you get any error.
stefaca said:
I did some research. error is because I'm tring to flash tft version 1249-7382 but mu phone finger print is 1254-2184.
how and where I can download ftf for my phone? ((
Click to expand...
Click to collapse
I don't think this would be a problem, but better check in your section for other stock roms.