Hi @ all,
I have some Questions about, how to flash my ROM...
I have to say my flashing skills arent good^^
I had only flashed a HTC S620 (Excalibur) one time...
It was OK... but now i have a HTC Mozart.
I wanted to install some Apps that are not in the Marketplace...
So I was looking to a unlocked Rom and founded this one:
http://forum.xda-developers.com/showthread.php?t=1255105
My Phone Specs:
Modell: HTC Mozart T8698
Software: Windows Phone 7.5
OS Version: 7.10.7712.60
Firmware:2250.09.13001.401
Hardware:0004
RadioSoftware:5.54.09.21_22.33b.50.10U
RadioHardware:A.102.0.D4
Bootloaderversion: 1.30.2250.1(117833)
Chip-SOC-Version: 2.2.5.0
I tried to translate the German words to English. Hope you understand everything.
My question is: Is it possible to Flash my ROM with the one in the link?
Thank you for everything
Best Regards from Germany
EDIT:// Installed RSPL... Can i start now with the installation of the ROM?
-
Launched RSPL and Installed HSPL... cant anybody help me? Please... i need help... Everytim i want to Flash but i only get a failure about connection of Phone and PC
EDIT:// GOT ERROR: 266
Ok, so you installed RSPL and then HSPL.
Then what else did you do? What applications do you have open etc?
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
If you are not familiar with flashing; isn't it better to wait until the final release in a few weeks??
_
I just installed RSPL and HSPL, and tried to connect with the PC in Bootloader mode. Until that everything was fine, but everytime i try to Install the ROM with ROMUpdateUtility.exe i get failure 266... But the Phone displays the USB connection... So i am a bit confused about that...
I wanted to install the ROM because of the unlock. You now that it isnt possible to install chevronwp7 on mango therefore i wanted to install an unlocked ROM. Later i wanted to install Navigon on it...
So what do you think about it? Do i have a chance to flash an unlocked rom or shoul i wait for the final version. And if i wait, where do i get Navigon?
I am looking for an Offline Navisoftware, and the only one i now is navigon.
If you know a better or alternative one please tell me.
I need Navi for Germany
Thank a lot
Hmm, I can't find info on error 266. It does not give any more descriptive message stating what an error 266 is?
Maybe try install Windows Mobile Device Centre if you are on Vista or Windows 7... If you are on XP try install Active Sync. Then connect your phone normally (to Zune). Then restart your PC and when you get back into Windows put your device in the bootloader menu and wait for it to detect you are in USB mode, then run RUU again and see if it works.
I am assuming you get the 266 error at the very end just before it starts the update?
Also just to cover myself, remember you do everything at your own risk. I cannot be held responsible for any damages etc.
Although I highly doubt installing the above mentioned application and trying again will damage your device :-D
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Thanks for your answer...
I tried again like you described... but same failure again..
i Uploaded a Picture:
h**p://s1.directupload.net/images/110911/cugp2d4j.png
What else can i do?
Hmm, I really am not sure.
How did you get it to 7712? Have you ever flashed your phone before?
There are 2 things which I can think of which may for some unknown reason work.
1) Reset your device and then try and flash your phone again with the rom.
2) Try and flash your Mozart with Ansar's NoDo ROM and see if that works (I used his NoDo ROM then updated it to Mango with the chevron unlock).
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Also when you enter the bootloader by holding down the volume button during a reset, in the red block does it say HSPL1.xx and below that CotullaHSPL?
Also is your phone maybe a branded phone? If so you have to unbrand it first before you can put a different unbranded ROM on as far as I know.
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
have you T-Mobile Branded HTC 7 Mozart?
i have buy this phone Wednesday...
It wasnt a new bran new phone, was new , but i bought it from a person which used it before. Maybe he had flashed.
However, i cant see any branding on startup or so. The Phone has 16 GB...
Maybe it was an tmobile phone before...
When i start in Bootloader, following comes up:
Red Green Blue White Screen...
On the Red place ist:
PD67100 SS-BC (4k)
HSPL1.32.2250.1(119496)
CotullaHSPL 0x07
TOUCH C1(c69)
Green:
SD SANDISK 15193MB
Partition Info-v211v413
i dont wanted install NoDo, but if its posible to install mango thru nodo then ok.
I wait for an answer of you. If you think its maybe ok, then i will try...
16gb is t-mobile
Step 1: RUU_Mozart_TMO_DE_1.09.001.16_5.50.09.15_22.23.50U_Signed_by_ansar
Step 2: RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33a.50_RELEASE
Step 3: Install RSPL 1.28 -without HSPL-
Finally DFT 7720 rom
EDIT://
I think i am a little scared. The person from whom i bought the phone has maybe flashed the phone.
I think i have enough of flashing roms^^
Just a last question:
I found this:
http://forum.xda-developers.com/showthread.php?t=1254384
Is it possible to deinstall HSPL and flash my Phone with
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe ?
And is it possible to update the Phone later with this rom via zune?
@ntt
hehe post at same time, you was a bit faster
Ok i will try first your idea....
EDIT://
Just a question... Are you Turkish?
Yahu merak iste... Bende türküm de ^^
If your using RSPL or HSPL please flash with stock rom and then flash RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe without SPL_signed.nbh other wise ur boot loader may damage and it will not visible. Click Here
Just a question... Are you Turkish?
You`ve PM
Thanks for everybody...
Status:
I have downloaded RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
Can somebody please write me how to Flash it? But please a bit detailed for nuts...
I dont want to make a mistake...
Please write it like you write something to a kid...
1)....
2)...
3) etc....
It would be so cool
Thanks @ everybody
Found this:
http://www.pocketpc.ch/windows-phone-7-allgemein/141042-hspl-entfernen.html
Its German...
If i understand it right then i have to Flash my Phone with an Signed ROM...
HSPL will removed then... Is that correct?
If yes: Where can i find Signed Rom for my Mozart?
I looked for it in the Board but found nothing (
I installed OSPL...
Before i installed HSPL my Bootloader was 1.30 now it is 1.32...
Can i flash an Original Rom by HTC with this Bootloader?
usually said:
I just installed RSPL and HSPL, and tried to connect with the PC in Bootloader mode. Until that everything was fine, but everytime i try to Install the ROM with ROMUpdateUtility.exe i get failure 266... But the Phone displays the USB connection... So i am a bit confused about that...
I wanted to install the ROM because of the unlock. You now that it isnt possible to install chevronwp7 on mango therefore i wanted to install an unlocked ROM. Later i wanted to install Navigon on it...
So what do you think about it? Do i have a chance to flash an unlocked rom or shoul i wait for the final version. And if i wait, where do i get Navigon?
I am looking for an Offline Navisoftware, and the only one i now is navigon.
If you know a better or alternative one please tell me.
I need Navi for Germany
Thank a lot
Click to expand...
Click to collapse
RUN ZUNE first before flashing
The version of your OSPL should not make any difference. :-D
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Related
I have a problem:
I flashed my hd2 from a stocked rom 1.42 dutch version, with hspl 1.42. I installed a custom rom from: HTC HD2 Laurentius WWE 21891UltimatePOWER.
it worked fine for 2 or 3 days and then it stocked, i reseted the phone and
When i turn on my HD2, i get a white screen. and it doest go away. Even after softreset (volume button down in bootloader)
When i go in to bootloader i see this screen:
Pb81100 hx-bc
Spl-1.42.hspl xe
0x05
Cotullahspl 0x30
Click to expand...
Click to collapse
When i try to instal a rom by going in to bootloader en then start in win xp the update wont start, it stocked at 0 %
Then i tried to flash a orginal romt by sd:
it stocked at 7 % and i get this screen:
_______________________RUUNBH
PB81100___HX-BC
SPL-1.42.__hspl___XD
________________0x05
CotullaHSPL______0x30
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
- Then i tried to flash a radio rom by activesync, in xp it wont start,
- i tried flashing by sd and it stocked on 98%
- I tried different to install a rom and radio rom by vista, but also no succes
- I tried task 29 (by the Attached Task29 into a single exe.) to erease all data from the phone, but in windows by activesync it wont start
i tried al the above from windows 7.
Is there anyone that can help me, please i getting very desperate.
VERY VERY IMPORTANT! Try and read 2-3 times what is written here http://forum.xda-developers.com/showthread.php?t=609477
Only afterwards proceed to the following :
First of all....try and use Windows Vista or Windows 7.
Second of all....do not try to use task 29 because its a bit more complicated and it involves some drivers and so on!
Use this little thing here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 and after its completed....flash a proper radio something like 2.08.50.xx which you can find on Radio dedicated section here http://forum.xda-developers.com/showthread.php?t=611787
After all these....flash a custom ROM but be careful to be one suited with your radio! Which is a radio appliable for most of custom ROMS BUT be VERY careful!
Another thing.....do not flash from SD Card....Use the CustomRUU tool and flash it via ActiveSync!
Do you get any particular error message? When in bootloader mode, does "usb" show at the bttom of the screen? If so, try moving to a different usb port, preferably at the rear of the pc, or try different cable or even different pc. If still no luck, try uninstalling and then re-installing the latest version of Activesync.
The White Screen issue sounds like the incorrect radio version for the rom. I'm not familar with the details of the particular rom, but there are certain rom/radio combinations that will do that if they do not match eg running a 2.10 based rom with a x.xx.51.xx radio. The phone works intially until a reset and then hangs.
viperd said:
VERY VERY IMPORTANT! Try and read 2-3 times what is written here ......
Click to expand...
Click to collapse
Thanks for the replay
I tried, flashing by activesync. i flashed it the first time by hspl (the tread you link to) and then by activesync. But like i said, the hd2 stops at a white screen, so i tried by every possible way i could think of. Also i tried task 39 by the tool you mention, but it still does not work.
But i will correct my ts.
@clydeb1
I tryd to flash different radioroms, but if it try by activesync it wont start and by sd-flash it stocks at 98%, but i will try a different active sync
Okay,
I tried the following options:
- I installed a newest activesync and tried to instal an new rom under windows xp. The update stocked at 0% and i tried to install radio rom, with the same results
- I installed the windows mobile on windows 7, and tried the same as in windows xp, and still the same results.
Then i tried flashing every rom from the site by the sd-method (after every bad flash i formatted the sd-card with fat32)
With the sd method the phone stocked at 99% and then gives the next images:
00018003
LEOIMG.nbh - Fail
Radio_V2Fail
Update terminate
update fail
Click to expand...
Click to collapse
IS there any one how has a solution for this problem
Ok....try from the beginning!
1.Get from here http://forum.xda-developers.com/showthread.php?t=611433 HSPL2_RUN.zip (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....http://forum.xda-developers.com/show...3&postcount=19
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
viperd said:
Ok....try from the beginning!
1.Get from here (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
Click to expand...
Click to collapse
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Give the phone to someone who can get it to work??
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
korenbloem said:
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Click to expand...
Click to collapse
Thanks mate, if my suggestion doesn't work hopefully you can help him.
xmoo said:
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Click to expand...
Click to collapse
@Korenbloem,
A simple hardreset would have fixed your issue as well.
Instead of all kind of panic experiments like mtty/ flashing radios/roms from sd you could have come to me and I would have helped you.
You flashed a very old rom from the rom archive but never the less that rom is intensivily tested by me and the beta team.
I have no idea what kind of software you installed/tweaks you did or anything else but also with installing the wrong software it could cause the rom not to boot anymore.
Sorry to tell you but these 'bricking' stories are mostly caused by unexperiened users and it
making me sad to see more people are opening threads like this blaming a rom and causing a panic reaction in public destroying our work.
I realy hope you fix your device and I will try to help you but this isn't a rom issue.
Leo
Laurentius26 said:
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
Click to expand...
Click to collapse
Thanks for the adivse, but i already tried that with an orginal rom, but i will try it again, mabey there is a difference with a shipped rom.
The first thing i did was a hard reset, but that did't worked. (the phone is in this shape for 1 month now).
Second. I am not blaming you or anyone. I flashed the wrong radio rom i think (cant remember witch one) And that is my own fault. I never wanna make the suggestion that it is because of youre rom.
I took a risk by flashing my phone. and i is my responsibility.
Edit: I tried a shipping rom nld. But it gives the same error as always, only after 7%. But thanks for the advise
@ Xmoo, First of al thank you that you want to help with a sollution. But what does that mean a goldcard and what are the consequences of using it.
Laurentius26 helped me with fixing my device.
The problem was the radio. and by flashing a factory rom from t-mobile, the hspl was reset to spl 2.00. After that he flashed a orginal shipped rom (the orignal one from my device). And the rom is fixed again SPL 1.66 is now on the device.
Laurentius thanks for al the help!!!!!
HD2 bricked?
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
vanbasten88 said:
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
Click to expand...
Click to collapse
Do you have a branded Leo? If so, enter bootloader (remove battery, press volume down, insert battery), connect via usb (maybe you have to wait for driver installation), start the latest *.exe from your operator/carrier...
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
andreftx said:
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
Click to expand...
Click to collapse
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
silverwind said:
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
Click to expand...
Click to collapse
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
andreftx said:
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
Click to expand...
Click to collapse
The 1.66 ROM you posted above has radio version 2.06.51.07 with it. So have you considered trying to flash that radio version and then flash the ROM. I know if you get the ROM to flash it will flash that radio anyway. But you seem to think you flashed a wrong radio so just thinking out loud here.
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
I got one of these, he came with android when i buy it, so i change to windows phone beacuse the battery was draining fast.
I install windows phone 7 with magdlr help, but i want to try others rom from 6.5 artemis or the bsb best but i try to install with magdlr and didn't work. I read i find out that i need something call hspl or spl, i try to install but i need version 1.43 at least i dont't have it. I try to install another that game a version of spl updated but mgdlr dont accept me the others rom to update the spl to 1.43.
And i put the phone in normal mode with the usb my windows 7 64 bits don't detect the phone missing drivers i guess but i already install drvupdate-amd64 i don't know why he doesn't recognize it. While mgdrl mode and recovery (green, red etc lines) he did recognize it.
What i can do??? I very new i been reading but this spl and drivers isues stop me
You cannot flash Windows Mobile 6.5 ROMs with MAGLDR.
On your PC, you should install Windows Mobile Device Center to get the correct USB drivers. Then, you should flash first the official TMOUS ROM to delete what´s on your device, re-flash HSPL (using HSPL3 or HSPL4) and then the custom ROM you want.
This way, old stuff incl. MAGLDR any maybe a wrong Radio ROM will be gone.
For all you need to do, please check the stickies in the ROM thread (how to flash your first custom ROM etc.).
Kenshin1870 said:
I got one of these, he came with android when i buy it, so i change to windows phone beacuse the battery was draining fast.
I install windows phone 7 with magdlr help, but i want to try others rom from 6.5 artemis or the bsb best but i try to install with magdlr and didn't work. I read i find out that i need something call hspl or spl, i try to install but i need version 1.43 at least i dont't have it. I try to install another that game a version of spl updated but mgdlr dont accept me the others rom to update the spl to 1.43.
And i put the phone in normal mode with the usb my windows 7 64 bits don't detect the phone missing drivers i guess but i already install drvupdate-amd64 i don't know why he doesn't recognize it. While mgdrl mode and recovery (green, red etc lines) he did recognize it.
What i can do??? I very new i been reading but this spl and drivers isues stop me
Click to expand...
Click to collapse
Man. You are lucky all those flashing with MAGLDR didnt really screw your phone for good.
Here is an eye-opener and best method in my opinion you shud follow.
1- Find the original ROM for your HD2 (This is easy using your serial number located under the battery). Google for T-Mobile ROM update and eventually you will be in T-Mobile Update site.
2- No luck in step 1? No Problem. Just read the sticky on how to install HSPL 2.08 by Cotulla. Then install the radio version 2.15.50.14.
DONT FLASH ANY RADIO WITH THE VERSION 2.15.5X.14 (X being equal to any number) In plain ENGLISH...dont flash a RADIO with 51. Only flash with 50 for TMO HD2
3. Now reboot your device in Bootloader mode and install any Windows ROM you want. Just steer clear of MAGLDR and flashing until you have proper knowledge and patience. Else you might end up with a dead HD2
I try to download the official rom and i found an uk version
But before this i have one problem the usb driver, i already install them with windows mobile device center too and still my pc dont detect the phone, is missing two drivers, two unknow devices.
Kenshin1870 said:
I try to download the official rom and i found an uk version
But before this i have one problem the usb driver, i already install them with windows mobile device center too and still my pc dont detect the phone, is missing two drivers, two unknow devices.
Click to expand...
Click to collapse
You could seriously damage and brick your phone flashing a non-US ROM onto your device. Why didn´t you check the ROM threads more carefully? Or the hint the previous poster gave you?
Maybe the fact you don´t get the driver thingy right saved your HD2.
And also, did you try flashing from the normal bootloader then? Another option would be to use the SD card method.
But then again, this would require some reading from your side. If you don´t like reading, you shouldn´t start flashing.
I have benn reading i try to install in bootloader but everytime i try thrown me a error and the the phone do a restart.
My spl version now is nspl 0.96.2250.0, so i cannot install hspl because at least i need the 1.42 version, i cannot install rom from normal mode, the only way i got is bootloader (assuming that doesn't keep popup that error) and magdlr.
Did you know how can i get a official rom that come with a higher spl version and be exceted from booloader or magdlr??
Kenshin1870 said:
I have benn reading i try to install in bootloader but everytime i try thrown me a error and the the phone do a restart.
My spl version now is nspl 0.96.2250.0, so i cannot install hspl because at least i need the 1.42 version, i cannot install rom from normal mode, the only way i got is bootloader (assuming that doesn't keep popup that error) and magdlr.
Did you know how can i get a official rom that come with a higher spl version and be exceted from booloader or magdlr??
Click to expand...
Click to collapse
Where from did you get the bootloader version information? As far as I remember, that is the version which comes from WP7. Strange, somehow.
Original Windows Mobile ROMs cannot be flashed via MAGLDR at all.
You must enter the standard bootloader, which is loaded *before* MAGLDR.
To do this, turn off your device, turn it back on pushing vol. down and power on at the same time - * and keep them pushed* until you see the multicolor bootloader screen. In this screen, you should be able to read what SPL version is on your device.
I do again recommend to flash an original ROM via SD card method (using a 2GB, FAT32 formatted card), please check here for the how-to. The ROM should be available here (be careful not to flash a test ROM, but a stock ROM!).
I succeded, i have to do it throw sd card method, and install the RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50.07U_2.07.50.27_2_Test rom.
Now i have spl 2.07 installed, i will proceed to install hspl 4 i guess, to flash roms
Thanks man
During insertion of the roma:RUU_Mozart_HTC_Europe_4.06.401.00_5.69.09
I used these two applications (RSPL/HSPL) DFT_XSPL_WP7FG1 to change Bootloader
And everything went fine,The phone works OK but when you try to run to enter in
Bootloader mode appears on the phone this picture..
The red part of the write PD67100 SS-BC(4) and nothing more
Please HeLLPPP
same problem
by picture you mean tri-color bootloader screen?
mine is doing the exact same thing! would be great if someone could shed some light on the problem, i will keep you posted if i find a solution.
matt
Is that the Mango ROM? If so you are not meant to have HSPL on your device... You are meant to put back the Original SPL before you flash to the official Mango ROM.
Yes i think bootloader screen.
Thank you very much for trying to help me....
Yes,this is New MANGO ROM 7720
oops, thanks for your help. is it possible to reverse the process and restore it to original?
Its, problem me too...
help!
Bootloader restore ? maybe ?
How to ?
Full reset ?
How to ?
heeeeeeelp!
No clue, don't think there is a way to put an older SPL on your device at the moment.
Perhaps in time there will be a fix, maybe monitor the "Shipped HTC mango roms" in the Phone 7 forum, under the Development section
Sorry, can't give a link as I'm on phone. Perhaps try and flash hour device with a pre-mango ROM (Original, not custom)... See if it lets you, if so hopefully the bootloader will be put back to an older version.
You guys really need to read first and be more careful. If there are no replies and you think it may be dangerous then ask or wait for some feedback from other users
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Thanks, any other ideas?
Sent from my T8697 using XDA Windows Phone 7 App
I am also having the same problem.
seems that the solution will come out soon
see the topic http://forum.xda-developers.com/showthread.php?t=1195647&page=61
Nicolas Alves said:
I am also having the same problem.
seems that the solution will come out soon
see the topic http://forum.xda-developers.com/showthread.php?t=1195647&page=61
Click to expand...
Click to collapse
if we turn off the phone and press power, volume up and down and camera, the mobile enters and starts with USB connection for zune update, there may be able to restore the boot.
Thanks fjpg, gave it a go but it won't work either...
Sent from my T8697 using XDA Windows Phone 7 App
I have a telestra HTC Mozzart ver: 8697 phone
I first tried to install the official mango Euro rom (7720) but it complained about wrong vendor ID and didn't install
Then I installed DFT RSPL WP7 FG2 and then tried to installthe official mango Euro rom (7720) again, this time it made progress to 7% and then restarted my phone and didn't made any progress, but my spl is now version 4.6, no OS loads and when I try to install that rom it complains again about wrong vendor ID
Do you guyz know any mango rom that install for telstra operators?
Can I install my stock rom again?
this is whats currently written on my bootloader screen:
PD627120 SS-BC (4k)
SPL-4.6 2250.0(129193) MNG
MicroP(LED) 0x07
TOUCH C1(v66)
SD SANDISK 7680MB
Partition Info-v211v413
I fixed my phone by installing the telestra rom I found in this thread:
http://forum.xda-developers.com/showthread.php?t=915827
my phone now boots and runs fine but its still windows phone 7.07,
I'm now looking for a mango rom which works on my phone
dgmortal said:
I fixed my phone by installing the telestra rom I found in this thread:
http://forum.xda-developers.com/showthread.php?t=915827
my phone now boots and runs fine but its still windows phone 7.07,
I'm now looking for a mango rom which works on my phone
Click to expand...
Click to collapse
Guy, you fixed your problem but not the one which we talk about here
To solve the problem "Screen unresponsive" or "Frozen screen" by yourself
Here I have seen many friends have the problem "Screen unresponsive after wakeup". It seems that the screen is frozen. So, Chinese friends call this phenomenon "frozen screen". The reason of "frozen screen" is that the TOUCH driver has some problems. This problem often happens on Mozart and Mondrian. It seems that "HTC Care" cannot solve the problem completely. After using the phone which sent back by "HTC Care" for a period of time, the problem appears again. Cause of cannot find "HTC Care", Chinese friends solve this problems by flash the T-Mobile ROM which can fix the TOUCH driver.
After I flashed the ROM, this problem happens very few only when the phone is connecting to the computer and removing from the computer. It never happens again when the phonecall comes.
Here I introduce 2 methods, may it can help you.
Method 1（SPL edition should be 4.X or below）
1.You should have HSPL on you phone（When flash HSPL, make sure your SPL is not 4.X or 5.X. If your SPL is 4.X,please ungrade your phone software to 7004 edition. If your SPL is 5.X, you should reference other methods using Y-cable or offline CAB to ungrade the SPL edition）
2.Download the T-Mobile RUU "RUU_Mozart_TMO_DE_1.28.111.03_5.52.09.16_22 .33a.50"（Just Google and you can find the download link）
3.Right click on the EXE file and extract the EXE pkg,enter the folder and delete the SPL_signed.nbh（You need the software 7zip or Winrar in your computer）
4.Run "ROMUpdateUtility.exe" to flash ROM.（Please see tips below）
5.Flash HSPL again.
6.Flash a customized ROM,just as DFT edition,Deepshining edition,and so on.
Tips:If you would like to use the official ROM,and don't mind the T-Mobile start LOGO,you can skip the "5."and "6.",just upgrade you phone by ZUNE software. You can also use the method introduced in“[Guide] How to debrand/flash your HTC 7 Mozart” to make your phone to T-Mobile edition.
Method 2（You can ignore SPL edition here）
1.You should have a "Y-cable", you can make one by yourself or buy one online.
2.Have a USB flash disk, format it to FAT32
3.Download the T-Mobile RUU "RUU_Mozart_TMO_DE_1.28.111.03_5.52.09.16_22 .33a.50"（Just Google and you can find the download link）
4.Right click on the EXE file and extract the EXE pkg,enter the folder and copy the RUU_signed.nbh to your USB flash disk. Rename the RUU_signed.nbh to MOZAIMG.nbh（Mondrian:MONDIMG.nbh）（You need the software 7zip or Winrar in your computer）
5.Turn off your phone. Hold volume down and camara key and press power key, you can enter USB host mode.
6.Y-cable connect to the computer and USB flash disk and then you phone, flash can start automatically.（When flashing your phone may restart）
7.After finish flashing, your phone software is T-mobile edition now. You can flash a custom rom after flash HSPL. And you can also update your phone by ZUNE.
My English is poor. May to help you and good luck.
great sharing. I think Mwang's touch fix patch is effective too, same functionality as the first method maybe?
I flashed DE 1.28 ROM to improve this touch issue, and it did make it better. frozen screen happens very rarely after that.
Though some people say it's a hardware problem and get brand new ones without this issue, for us who don't have the chance to get after-sale services in China mainland...it seems to be the only option to improve, for now...
Actually,mwang's patch is T-Mobile edition without SPL too. According to the test, the performance of touch driver V69 is perfectly good as touch driver V63 provided by mwang. So, if we have flashed T-Mobile 1.28 edition, it's not necessary to flash mwang's patch.
I c. I was wondering whether to flash that touch fixing patch, so it's not necessary huh~thx for sharing
EmpTea said:
great sharing. I think Mwang's touch fix patch is effective too, same functionality as the first method maybe?
Click to expand...
Click to collapse
Link? Can't find mwang's fix mentioned anywhere?
This is how I ended up fixing mine:
http://forum.xda-developers.com/showpost.php?p=20059270&postcount=65
This solution is for those that cannot find HTC service centre. This is only quick fix. If you can find HTC Care in your country, go and ask HTC to change the whole touchscreen.
kkcheong said:
This solution is for those that cannot find HTC service centre. This is only quick fix. If you can find HTC Care in your country, go and ask HTC to change the whole touchscreen.
Click to expand...
Click to collapse
can you back that statement up with some evidence? as I mentioned this 100% fixed my issue, so i'd love to understand what is wrong with my hardware if this is the case?
Maybe mwang's patch only can be found on DFT Chinese forum. Link:http://www.darkforcesteam.com.cn/forum.php?mod=viewthread&tid=55254
Patch download:http://www.filefactory.com/file/cf22364/n/Fixed_Touch.7z
Maybe this is a new&quick way to solve the prolem. If I flash a new rom later, I will have a try. Great thanks.
maybeture said:
Maybe mwang's patch only can be found on DFT Chinese forum. Link:http://www.darkforcesteam.com.cn/forum.php?mod=viewthread&tid=55254
Patch download:http://www.filefactory.com/file/cf22364/n/Fixed_Touch.7z
Click to expand...
Click to collapse
The download has two folders, 1 and 2, and looks like a ROM update in each, but they are in Chinese. Was able to follow them through, but bombed with the typical 226 error as they aren't signed.
Does this mean I need to HSPL my mozart to use the patch?
Yes.
1.you should have hspl on your phone.
2.flash 1. just click "next" can be OK.
3.hspl again
4.flash 2
now, you can find the touch driver is changed from V69 to V63 now. And your phone rom edition is T-Mobile 1.26
maybeture said:
Yes.
1.you should have hspl on your phone.
2.flash 1. just click "next" can be OK.
3.hspl again
4.flash 2
now, you can find the touch driver is changed from V69 to V63 now. And your phone rom edition is T-Mobile 1.26
Click to expand...
Click to collapse
ok, I finally managed to get my gold card setup working again. Can I use these updates with gold card method instead of HSPL and the loader?
And also, if I am just resetting my phone, am I better off just using the full tmobile ROM here: http://forum.xda-developers.com/showthread.php?t=857561
Update: Just loaded that t-mobile ROM on and touch screen problem is fixed. Why on earth tmobile have better/different touch drivers is odd, but i'm not complaining!
ammm... so i make a gold card from psas.revskills.de/?q=goldcard, make one, get it to that SD card, get working off ROM, rename that to MOZAIMG.nbh, put that next to goldcard in that SD card. and then just plug everythin together and bootload ?
ps. i have 5.1 bootloader... so im safe to use this method ?
RUU_Mozart_HTC_Europe_1.23.401.06_Radio_5.51.09.06 _22.30.50.09U_by_ansar
rom that i took.
Gold card method can completely replace the SPL, that's why it's used to downgrade to earlier SPLs, e.g. to allow installing RSPL/HSPL. So you *should* be safe to do this with a 5.1 SPL.
I don't know about that ROM you linked to, as it's cooked by Ansar. So I don't know what SPL it has, and I don't know if it includes the touch drivers to fix your problem. The one I described above does.
Help ???
hi everybody
i have a htc Mozart that it has same problem i mean touch screen.
its information is blew :
Firmware revision number : 2250.21.51002.841
hardware revision number : 0004
boot loader version : 5.10.2250.2(133064)
chip soc version : 2.2.5.0
and this htc is for telstraone operator
now i wanna know if i can flash this rom : RUU_Mozart_TMO_DE_1.28.111.03_5.52.09.16_22.33a.50_RELEASE
for solve touch screen problem or not?
naser2590 said:
hi everybody
i have a htc Mozart that it has same problem i mean touch screen.
its information is blew :
Firmware revision number : 2250.21.51002.841
hardware revision number : 0004
boot loader version : 5.10.2250.2(133064)
chip soc version : 2.2.5.0
and this htc is for telstraone operator
now i wanna know if i can flash this rom : RUU_Mozart_TMO_DE_1.28.111.03_5.52.09.16_22.33a.50_RELEASE
for solve touch screen problem or not?
Click to expand...
Click to collapse
yep, i'm with telstra and running that same ROM. I just ran connection setup after flash to ensure all the telstra settings are there.
well another problem here, but I believe it's not the touch screen it self.
It only occurs sometimes in lock-screen where dragging the lock-screen from bottom to top doesn't work.. it just bounces then dead..
so my remedy is to turn-off the screen by pressing the power button and turn it on again, tap on back button until you feel the vibration, then drag the lock-screen.. if you want to make sure, you can tap the back button multiple times.
benneh said:
yep, i'm with telstra and running that same ROM. I just ran connection setup after flash to ensure all the telstra settings are there.
Click to expand...
Click to collapse
I'm really thanks for your help
But i don't have any experience in htc 7 Mozart and also i don't have Y-Cable ( I live in iran , my English is a few week ) . i must use of method #1 and my bootloader is 5.X , i have to downgrade to 4.X then flash the rom . if it's possible guide me more with more details .
thanks everybody
corrected touch unresponsiveness
my htc mozart screen unresponsive problem is ok now.
itz bcause of ur help on "flash HSPL" method 1.
Thanksssss!!!