Very simple guide to unlocking bootloader - Sony Ericsson XPERIA X10 Mini

Thanks to Pollo666!!
pollob666 said:
Ok,
I am not Responsible if it BRICK YOUR PHONE!!!!!
Here it goes,
Step 0: (Must Follow)
A) Post your Questions in Q&A Thread. Not in Developer Thread
B) Post your Request in General Thread. Not in Developer Thread
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26
C) Download Unlocker : From http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
Thanks to
the_laser, Androxyde, Bin4ry, SpyderX for his Tutorial (I used his one ) and Every Single Soul who helped to Unlock the Bootloader
--------------------------------------------------------------------------------------​
Click to expand...
Click to collapse

Next time post in Q&A or General section.
Is this dummie enough?
http://forum.xda-developers.com/showthread.php?t=1254225
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.

SpyderX said:
Next time post in Q&A or General section.
Is this dummie enough?
http://forum.xda-developers.com/showthread.php?t=1254225
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.
Click to expand...
Click to collapse
Well.. It certainly is thorough. A tad too much text for me and it's not as straightforward as it could have been, but it seems alright.
By any chance, is there any possibility it could be stripped down even further? I don't care about the disclaimers as it's common sense that whomever writes a guide is not to be blamed if something isn't working as it should do by the end of such guide.
I have fully working adb drivers for my phone. I know that since I have used adb multiple times lately. It is branded and sim locked to Three (operator in Sweden)
Is it possible to strip it down to, say this format:
1. bla bla bla
2. do this
3. do that
4. then do this
5. etc. etc. etc.
Do you understand? I'd like it if it was much less text and short but straightforward numbered "to-do's".
If it is not doable, I will have to go through your texty guide and I sincerely thank you for at least making an easier guide than that of the_laser. Kudos to him for making it possible to unlock our bootloaders.

Theshawty said:
Well.. It certainly is thorough. A tad too much text for me and it's not as straightforward as it could have been, but it seems alright.
By any chance, is there any possibility it could be stripped down even further? I don't care about the disclaimers as it's common sense that whomever writes a guide is not to be blamed if something isn't working as it should do by the end of such guide.
I have fully working adb drivers for my phone. I know that since I have used adb multiple times lately. It is branded and sim locked to Three (operator in Sweden)
Is it possible to strip it down to, say this format:
1. bla bla bla
2. do this
3. do that
4. then do this
5. etc. etc. etc.
Do you understand? I'd like it if it was much less text and short but straightforward numbered "to-do's".
If it is not doable, I will have to go through your texty guide and I sincerely thank you for at least making an easier guide than that of the_laser. Kudos to him for making it possible to unlock our bootloaders.
Click to expand...
Click to collapse
I'll try. Many people have been posting questions that already have been long answered by stuff already in first post, so I'm nervous about what they'll do if I strip it down .

Simple Bootloader unlock Guide
Theshawty said:
Is it possible to strip it down to, say this format:
1. bla bla bla
2. do this
3. do that
4. then do this
5. etc. etc. etc.
Do you understand?
Click to expand...
Click to collapse
Ok,
I am not Responsible if it BRICK YOUR PHONE!!!!!
Here it goes,
Step 0: (Must Follow)
A) Post your Questions in Q&A Thread. Not in Developer Thread
B) Post your Request in General Thread. Not in Developer Thread
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26
C) Download Unlocker : From http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
Thanks to
the_laser, Androxyde, Bin4ry, SpyderX for his Tutorial (I used his one ) and Every Single Soul who helped to Unlock the Bootloader
EDIT: If you have any Questions or problems, Please refer to SpyderX's Guide. Hopefully you'll find the answers there.
[My phone was stolen just 1 day after I Unlocked. I couldn't even try any new ROM with new kernel. Can't help you guys. Ask SpyderX, he is my guide. I always find him answering the questions I intended to ask. Just use some searching.]
--------------------------------------------------------------------------------------
If I helped , Thank me.​

pollob666 said:
Ok,
I am not Responsible if it BRICK YOUR PHONE!!!!!
Here it goes,
Step 0: (Must Follow)
A) Post your Questions in Q&A Thread. Not in Developer Thread
B) Post your Request in General Thread. Not in Developer Thread
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26
C) Download Unlocker : From http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
Thanks to
the_laser, Androxyde, Bin4ry, SpyderX for his Tutorial (I used his one ) and Every Single Soul who helped to Unlock the Bootloader
--------------------------------------------------------------------------------------
If I helped , Thank me.​
Click to expand...
Click to collapse
Wow, best gide ever.

pollob666 said:
Ok,
I am not Responsible if it BRICK YOUR PHONE!!!!!
Here it goes,
Step 0: (Must Follow)
A) Post your Questions in Q&A Thread. Not in Developer Thread
B) Post your Request in General Thread. Not in Developer Thread
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26
C) Download Unlocker : From http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
Thanks to
the_laser, Androxyde, Bin4ry, SpyderX for his Tutorial (I used his one ) and Every Single Soul who helped to Unlock the Bootloader
--------------------------------------------------------------------------------------
If I helped , Thank me.​
Click to expand...
Click to collapse
Thank you ..this helped me..but i dont find thank button any where

x10minilover said:
Thank you ..this helped me..but i dont find thank button any where
Click to expand...
Click to collapse
Log in and then you'll find!
The guide presented is very nice and easy but I already unlocked it through the spyderX guide!
Sent from my unlocked X10mini!

pollob666 said:
If I helped , Thank me.
Click to expand...
Click to collapse
Thanks this did help me! Where's the thank you button?
Also really noob question, once I've unlocked and flashed a custom kernel, am I supposed to lock the bootloader or leave it unlocked??
Thanks in advance

Malvadojedi said:
Thanks this did help me! Where's the thank you button?
Also really noob question, once I've unlocked and flashed a custom kernel, am I supposed to lock the bootloader or leave it unlocked??
Thanks in advance
Click to expand...
Click to collapse
The thanks button is right next to the quote button. It is not visible when on Tapatalk or any other Tapatalk based apps.
Leave the bootloader unlocked. If you relock it, it will reject the custom kernel.

Hi thanks for your reply, I'll try it out to night so that I can install CM7, I'm on CM6 at the mo.
Regards

guys help me, it came out that I had setool2, and as I do the unlock with the appropriate file, my result was that the lost cell coverage and probe and using the file SEMC and has not been solved, I've tried everything and I am scared: block again with the setool1 bootloader, I have spent the cel by SEUS.
really do not know what else to do

Hi,mini pro user here.Well,i tried to unlock the bootloader following the procedure step by step,but all i get in the end is the RUNNING S1_EROM VER "R8A029".I think it is because of this: http://i.imgur.com/zv3rR.png but this file exists in /system/bin :/ .Any suggestions?

NickThess said:
Hi,mini pro user here.Well,i tried to unlock the bootloader following the procedure step by step,but all i get in the end is the RUNNING S1_EROM VER "R8A029".I think it is because of this: http://i.imgur.com/zv3rR.png but this file exists in /system/bin :/ .Any suggestions?
Click to expand...
Click to collapse
Yep.
Make a CWM backup.
Flash back to stock.
Root your phone.
Unlock the bootloader on your phone.
Restore the CWM backup.
It's that simple .
Cheers ,
SpyderX

SpyderX said:
Yep.
Make a CWM backup.
Flash back to stock.
Root your phone.
Unlock the bootloader on your phone.
Restore the CWM backup.
It's that simple .
Cheers ,
SpyderX
Click to expand...
Click to collapse
Thanks,gonna try
Edit:Worked like a charm,thanks!

My x10 mini ( fw 2.3.5 cm7 2.0.7) was bricked usb. how can i unlock bootloader ? Please help.
Sorry for my English.

Yay This plain instruction is much easier to read than original
*downloading FXP*

i'am success unlock bootloader to x10mini or robyn my use
thank to post.. step by step unlock bootloader
but.. i have problem to relock bootloader... please help me!!!

kucluko said:
i'am success unlock bootloader to x10mini or robyn my use
thank to post.. step by step unlock bootloader
but.. i have problem to relock bootloader... please help me!!!
Click to expand...
Click to collapse
Credit goes to SpyderX!
If you relock your bootloader while using a custom kernel your phone will be bricked!
1. Download S1tool and extract it to an appropiate location on your PC (not needed if you already have s1tool) . (Credits go to the_laser for this tool)
S1tool post: http://forum.xda-developers.com/show...0&postcount=26
Direct download link: http://db.tt/OrOQO33
2. Then, download and Install Flashtool v0.2.9.1 beta (don't use 0.3.0.0 as profile for our phones need to be added. It's simpler to use 0.2.9.1 beta) Here: http://forum.xda-developers.com/showthread.php?t=920746
Download Link: http://www.multiupload.com/7H4JT35B6G
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.10.exe file inside and install Gordon's Gate (needed for Flashtool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Note: This Flashtool and Gordon's Gate installation is not needed if you have already done this.
3. Turn off your phone.
4. Launch s1tool.exe in the folder you extracted s1tool to.
5. Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
6. Wait for the process to complete. Congratulations! You now have relocked your bootloader!
Click to expand...
Click to collapse

guys did any of you coming out "simlock setool2 certificate"?
is that my I get that and try from ginger.DX and lost the cellular signal

Related

[GUIDE][ARC/NEO] Information & workaround to 0% battery issue

This is our functional workaround to the issue (Unlocked bootloader only):
http://forum.xda-developers.com/showthread.php?t=1312398
I will not monitor this thread . Please post commets on the original thread. Thank you.
up up up
Sticky! thanks Bazoocaze
Nice......=)
This one helped me.
http://forum.xda-developers.com/showthread.php?t=1416370
SEMC Android Phone 0% Battery Fix Tool
Code:
Gift For All Sony Ericsson User
---------------------------------
SEMC Android Phone 0% Battery Fix Tool
This Fix Tool now can only fix (Xperia Arc) and (Xperia Neo)
Instruction:
1) Open Application then press "Get Unlock code" in that site click on Continue Button
2) in Legal terms Form check all check boxes
3) now enter IMEI and other Fields after that on Your unlock code appeared so enter that code to application
4) click on Fix it Button then with powered off phone press menu button and connect Cable to Phone install needed driver
5) if every thing be ok process will continue now wait until process end after that remove cable and battery from phone
then insert battery and power on phone..... enjoy it!
download
ul.to/9l6wzm32
clubs123 said:
Code:
Gift For All Sony Ericsson User
---------------------------------
SEMC Android Phone 0% Battery Fix Tool
This Fix Tool now can only fix (Xperia Arc) and (Xperia Neo)
Instruction:
1) Open Application then press "Get Unlock code" in that site click on Continue Button
2) in Legal terms Form check all check boxes
3) now enter IMEI and other Fields after that on Your unlock code appeared so enter that code to application
4) click on Fix it Button then with powered off phone press menu button and connect Cable to Phone install needed driver
5) if every thing be ok process will continue now wait until process end after that remove cable and battery from phone
then insert battery and power on phone..... enjoy it!
download
ul.to/9l6wzm32
Click to expand...
Click to collapse
i can't download file ?
download
ul.to/9l6wzm32
copy this ul.to/9l6wzm32 and paste in new window
@clubs123: Why is it necessary to enter (bootloader) unlock code? What about those people who already have their BL's unlocked?
Battery 0%
Hi, thanks for your work.
Does this method really?
Do you get the battery to 100%?
I am trying to download the file but I get error I can not wait, someone can put in free download
Greetings.
hi
this soft is not my work
those who have unlocked bootloader try any code 123456
download
4shared.com/rar/G0iYAsxv/ZeroPercentFixTool.html
0% battery
OK, thank you very much you have already downloaded.
I have the bootloader opened with the Omnius.
I don't need to make the source code of the page or the 123456 I already worth?
I'll try and mention the results.
Thank you.
Best regards.
Hello, at the moment have not worked me.
I unlock the Bootloader with Omnius and the code 123456 have not worked me.
I would like to know if it works and repair the phone battery error 100% to make the code because I have it under warranty.
Someone could confirm if it works because if it does gives me equal to lose the warranty.
Thank you all.
Original
Yo desbloquee el Bootloader con Omnius y con el código 123456 no me ha funcionado.
jciral said:
OK, thank you very much you have already downloaded.
I have the bootloader opened with the Omnius.
I don't need to make the source code of the page or the 123456 I already worth?
I'll try and mention the results.
Thank you.
Best regards.
Click to expand...
Click to collapse
download here:
http://www.mediafire.com/?a1vbb14ikzxug72
What this thinki do?? Patch klernel? Or rapair I2C comunication ?
I finally worked, but not fix the problem 100% Patch Boot is 85%.
We have to wait a little longer.
Greetings.
Can i ask for clear answer before i use it..... This stuff fix battery problem in same way as Bazookaze did (patched kernell + app) or it fix it and phone work (like before fuel guage fail) without any 3th app soft and patch....
BTW !GJ BAZOOCAZE!
Kuter_tm said:
This stuff fix battery problem in same way as Bazookaze did (patched kernell + app)
BTW !GJ BAZOOCAZE!
Click to expand...
Click to collapse
yes its same way
Awesome work
Thankz mate ..
---------- Post added at 11:14 AM ---------- Previous post was at 10:16 AM ----------
Thanks to all XDA members for helping
Confirmation 0% battery issues from downgrading
Can someone who update to OFFICIAL ICS lockd BL downgrade to 2.3.4
and cofirm if theres no 0% battery issues
As title states
Will users have a problem?
Can someone test

[Q] Need Help Please... Relocking Bootloader!

hi all,
i want to ask you a way to relock the bootloader?
the method described by SpyderX didn't work for me while i unlocked the bootloader via the method he described!
for details i have did the following:
i unlocked bootloader via his method
i didn't change stock kernel
i run S1tool =====> didn't find any button called restore!
i couldn't relock bootloader...
i only need to lock my bootloader to check something with the radio chip with the SE dealer over here.
EDIT: forgot to mention that i have X10 mini pro
how to relock boot loader:
1. Flash stock kernel or stock ROM with flashtool v 0.2.9.1 Beta
2. Run S1Tool and choose the RESTORE option until there is a message to turn off and connect phone to pc
3. Turn off the phone and connect to the pc, wait until the process is complete.
4. please be sure to check by S1Tool.
Here i have the S1Tool with RESTORE option, to relock bootloader. All kredit to the Laser For the tool, and don't forget to press thanks button if i can help you.
Sorry for my bad English
stiv8785 said:
how to relock boot loader:
1. Flash stock kernel or stock ROM with flashtool v 0.2.9.1 Beta
2. Run S1Tool and choose the RESTORE option until there is a message to turn off and connect phone to pc
3. Turn off the phone and connect to the pc, wait until the process is complete.
4. please be sure to check by S1Tool.
Here i have the S1Tool with RESTORE option, to relock bootloader. All kredit to the Laser For the tool, and don't forget to press thanks button if i can help you.
Sorry for my bad English
Click to expand...
Click to collapse
man thanks for the tool but i had something else happening now!
in the s1 version it's locked R8A028 but my phone was R8A029!
why the change of the last digit!
minachvim said:
man thanks for the tool but i had something else happening now!
in the s1 version it's locked R8A028 but my phone was R8A029!
why the change of the last digit!
Click to expand...
Click to collapse
Thats ok, you can read in spyderX thread. here :
If the line RUNNING S1_EROM FROM VER "#8A02$" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A02$"), your bootloader was not successfully relocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A02$"), your bootloader has been successfully relocked .
Note: The value of the "$" is dependent on an unknown factor. The unknown factor doesn't matter to us.
stiv8785 said:
Thats ok, you can read in spyderX thread. here :
If the line RUNNING S1_EROM FROM VER "#8A02$" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A02$"), your bootloader was not successfully relocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A02$"), your bootloader has been successfully relocked .
Note: The value of the "$" is dependent on an unknown factor. The unknown factor doesn't matter to us.
Click to expand...
Click to collapse
so the 8 and 9 doesn't affect the phone at all?? or it affects the phone in some way??
minachvim said:
so the 8 and 9 doesn't affect the phone at all?? or it affects the phone in some way??
Click to expand...
Click to collapse
yes, it doesn't matter.
I have repeatedly Unlock and relock bootloader.
stiv8785 said:
yes, it doesn't matter.
I have repeatedly Unlock and relock bootloader.
Click to expand...
Click to collapse
mmm thanks
do you know what does the 8 and 9 means??? i'm trying to find what does it mean but no one explain it!
minachvim said:
mmm thanks
do you know what does the 8 and 9 means??? i'm trying to find what does it mean but no one explain it!
Click to expand...
Click to collapse
Ahem.. The unknown factor doesn't matter to us!
Does not matter.

[Q] Update Android in mini pro

Hello!
I am owner of x10 mini pro that has 2.1-update android version.
In a discussion with a guy , i asked him if i can update this version to the newest one. And he answer that that will be possible if the Boot Loader of the phone will be unlocked.
So.. by searching in this forum i found this thread that talks about unlocking boot loader.
So my question is if it is possible now to install the last version of Android in this phone and if not , which is the last version of android that can be installed in this machine?
Thanks..
Not necessary unlock your bootloader, you can try many roms without flashing the kernel, so I recommend you to flash MiniCM7Pro by paul, for starting, it's Android 2.3.7 And you dont have to unlock your bootloader...
becarefull with unlocking bootloader it will briked your phone..
here the easiest way to do it..!
I am not Responsible if it BRICK YOUR PHONE!!!!!
Here it goes,
Step 0: (Must Follow)
A) Post your Questions in Q&A Thread. Not in Developer Thread
B) Post your Request in General Thread. Not in Developer Thread
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/show...0&postcount=26
C) Download Unlocker : From http://forum.xda-developers.com/show...77&postcount=3
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
Thanks to
the_laser, Androxyde, Bin4ry, SpyderX for his Tutorial (I used his one ) and Every Single Soul who helped to Unlock the Bootloader
Thanks for your answers guys.
Now some new questions were born.
@icerebro :
What i found in the forum about MiniCM7Pro is this . Also this thread doesn't have any instructions on how to flash this ROM in phone.
This one has instructions on how to do this but it talks about flashing kernel ( needed unlocked boot loader).
Maybe there is somewhere else a tutorial on how to flash only ROM but can't see it.
@nelikp
Hmm in this thread i read this "MiniCM7 + nAa Kernel = Best Combination." and a later post explains why. So.. this makes me to ask what if my phone be briked ? If happen i couldn't reset it at factory's default settings or fix it someway ?
Also B) Download S1tool and C) Download Unlocker links in your tutorial are broken.
Finally , whats going on with languages ? If i flash both Kernel and ROM how then can i add my native language to write at sms ? Or doesn't need such a thing ?
Is possible to change and the boot screen too ?
This Is what i did for Installing MiniCM7 V21 Pro By Paul:
Before That Download MiniCM7_Pro_V19.zip & MiniCM7_Pro_V21.zip
1: install CWM v3.2 on your phone.Get it Here (http://forum.xda-developers.com/showthread.php?t=1106146)
2: boot your phone and go to CWM by pressing back button several times.
3: do a factory reset
4: In advanced cleared Dalvik cache and Battery Stats.
5: go to 'Install zip from sdcard' & choose custom zip....and select MiniCM7_Pro_V19.zip
6: reboot System - when it gives you the error of bad Recovery select "no" and select "yes" for confirmation
7: re-boot into CWM recovery (Now you should have CWM 4.0.1.4)
8: repeat step 5.then reboot your phone.
9: go to CWM recovery again,select 'Install zip from sdcard' & choose custom zip....and select MiniCM7_Pro_V21.zip
Thank you too for your instructions. But tell me.. if i flash only the ROM (MiniCM7 V21 Pro) the Wifi tether will be working or not ? And if i try to Unlock my bootloader to change and the kernel and my phone got briked can i fix it then or it will be for trash.
If you make a mistake while unlocking your bootloader, you can brick your phone. At this point, the only way to fix it is to send it off to SE and ask them very nicely to repair it for you.
So read the above instructions carefully!
so far i have no problem with the wifi..remember...you have to make a full wipe before installing the rom.and if you have problem with the wifi,please read the question & answer section provided at the MiniCm Pro V21 thread..and Ticklefish is right...there's no way to fix it..so be careful when you want to do it..
Finally i flashed MiniCM7 V21 Pro ROM correctly and now im playing with my new android version..
Thanks to all of you!

[Unlock Bootloader]Xperias 2011 unlock for free. LAST DAY!

Hi everyone, there are 4 days for unlock bootloader for free on Omnius.
There are a lot of ppl who have Bootloader Unlock allowed: NO! and as u know it can only be unlocked by pay method. Well you are lucky if you are seing this post because if you go to omnius page: http://www.omnius-server.com/ and register you can unlock for free your 2011 xperia phone. I already try this method on my brother's xperia mini pro (sk17) and it works without pay anything.
If you have some question be free to ask here, I will help you in your unlocker, its a little diffficult but can be done!.
Good luck!
Edit:
STEPS:
Open omnius, log into your account.
Select your device from list.
Press unlock -> Bootloader
It will show you an image where your testpoint is located.
- Next steps are for mini pro -
Cancel the process. Now turn off your xperia mini pro. Remove your batter
Localizate the testpoint and put there your tool (It can be a paper clip with cable).
Put the clip on your test point and the cable to the ground (omnius will help you with this) then connect your phone at the computer.
Windows will recognize new driver and it will fail with installation. Dont worry, open device manager and right click that device and choice update driver. Select install from my computer. Go to omnius installation (c->program files -> omnius -> drivers) and accept. It will show you a warning telling that those arent the proper drivers but its ok, just press install anyway.
Thats it, it will install you the drivers you need.
Now unplug test point and put your battery on (usb cable must be conected).
Now unplug the usb now.
Put usb again on your xperia and once again it will show you new device founded, follow the same step before, device manager, update, from computer, etc, etc). Thats it, now open omnius and press unlock, bootloader and it will succes.
For anothers devices it will be the same but with different testpoint, steps may be different but omnius will show you the way.
I hope this can help you, because is one day left.
Quick question paisano is it only the bootloader or does it unlock the sim and fastboot mode??
ginryu said:
Quick question paisano is it only the bootloader or does it unlock the sim and fastboot mode??
Click to expand...
Click to collapse
unlock bootloader means that you can use fastboot mode.
Also you can unlock your sim for use any operator you want.
ocovarr112 said:
unlock bootloader means that you can use fastboot mode.
Also you can unlock your sim for use any operator you want.
Click to expand...
Click to collapse
Well not exactly I unlocked the bootloader and was unable to access fast boot mode on my lww due to the simlock. I had to do a full unlock before had access to fastboot.
ginryu said:
Well not exactly I unlocked the bootloader and was unable to access fast boot mode on my lww due to the simlock. I had to do a full unlock before had access to fastboot.
Click to expand...
Click to collapse
Well before I do this it was: unlock bootloader allowed: NO
Then I do this and it works pretty well.
ocovarr112 said:
Well before I do this it was: unlock bootloader allowed: NO
Then I do this and it works pretty well.
Click to expand...
Click to collapse
But do you have access to fastboot?? Connect the phone to the PC while it is off and you are holding the volume up key the notification led should turn on blue.
ginryu said:
But do you have access to fastboot?? Connect the phone to the PC while it is off and you are holding the volume up key the notification led should turn on blue.
Click to expand...
Click to collapse
Yes I have. Already flashed fxp kernel and CM9 and it works great.
Good to know I had to pay to unlock it
Funny and usefull...thank for sharing...
Till-Kruspe said:
Funny and usefull...thank for sharing...
Click to expand...
Click to collapse
If you wanna thank me then press thanks button, thats what it is for.
ocovarr112 said:
If you wanna thank me then press thanks button, thats what it is for.
Click to expand...
Click to collapse
8 thank per day is not enough for you mate...
One big thanks.
Sent from my Live With Walkman using Tapatalk
I apparently have to have a testpoint. Any help?
raginruski said:
I apparently have to have a testpoint. Any help?
Click to expand...
Click to collapse
You can do it with a clip. You can search for YouTube videos about test point or unlocking Xperia 2011 phones.
Hello!
So this method works for live with walkman? Can I install costum roms after that? Is my warranty still valid after I unlock bootloader with this method / can I re-lock bootloader if needed?
Thank You!
Have a nice day
livingcode said:
Hello!
So this method works for live with walkman? Can I install costum roms after that? Is my warranty still valid after I unlock bootloader with this method / can I re-lock bootloader if needed?
Thank You!
Have a nice day
Click to expand...
Click to collapse
Yes, this works with LWW.
Yes, you can install custom ROMs after it.
Warranty is void if bootloader is unlocked.
Yes, bootloader can be relocked.
I have a question, in the program when i try unlock bootloader they tell to retire the batery off and reconect and connect the testpoint to phone's ground.... and next shortly press power buton and disconnect testepoint.
i dont understand this step, testpoint? wtf?
Any help
So I connected the test point and it shows up on my computer and then I shortly press the power button and when I reconnect it, it still doesn't proceed. Help please?
raginruski said:
So I connected the test point and it shows up on my computer and then I shortly press the power button and when I reconnect it, it still doesn't proceed. Help please?
Click to expand...
Click to collapse
First take out battery from phone then take some wire and connect it,to ground (you can find testpoint locations on omnius site) ,also be sure that drivers are installed (you
can find them in S1tool) now comes tricky part where you need to do in few seconds but first check is testpoint connected,so tricky part is that you need to disconnect testpoint and put battery while is sending loader or error will come up (phone will be ok)
I hope you will understand.
Sent from my WT19i using Tapatalk
It WORKS, thanks ocovarr

[Q] How To Root Xperia U / ST25i

I bought my new Xperia U . Please Some one Tell me how to unlock bootloader & Root the Device Please Post Video / Screen Shots
=-Step bY Step-=
Thank You !!!​
rakeshnofear said:
I bought my new Xperia U . Please Some one Tell me how to unlock bootloader & Root the Device Please Post Video / Screen Shots
=-Step bY Step-=
Thank You !!!​
Click to expand...
Click to collapse
Plese search the forum.
Unlocking and rooting of X- U/P/s has already been explained many times in detail..
rakeshnofear said:
I bought my new Xperia U . Please Some one Tell me how to unlock bootloader & Root the Device Please Post Video / Screen Shots
=-Step bY Step-=
Thank You !!!​
Click to expand...
Click to collapse
Xperia U / S / P Bootloader unlocking
http://forum.xda-developers.com/showthread.php?t=1527159
Tested and perfectly working on my Xperia U
Simply select advanced tab from flashtool and root then select zergrush easiest way
I got a message saying MTP is enabled and cant root
alankstiyo said:
I got a message saying MTP is enabled and cant root
Click to expand...
Click to collapse
Flash any of the custom kernels to get root
Sent from my ST25i using Tapatalk 2
plzzzz help
Friends,i am new here and xperia u is my first android device..i know its a bit too much to ask but if anyone can please post a detailed step by step procedure for rooting xperia u..that would be really helpful for many others like me..i have already googled it so many times but still no luck with a perfect tutorial..also,the method suggested above to root by flashtools does not work..hope to see a reply from senior members and moderators soon..regards..
reply on how to unlock bootloader
xperiavish said:
Friends,i am new here and xperia u is my first android device..i know its a bit too much to ask but if anyone can please post a detailed step by step procedure for rooting xperia u..that would be really helpful for many others like me..i have already googled it so many times but still no luck with a perfect tutorial..also,the method suggested above to root by flashtools does not work..hope to see a reply from senior members and moderators soon..regards..
Click to expand...
Click to collapse
Number1) unlock bootloader, it is free and official from unlockbootloader.sonymobile.com
number 2) download flashtool, find it urself......
number3) Once clicked, you will then get a pop up where it will read “Are you really sure?”, click on “Yes, I’m sure” and there you go, you now need to open the command prompt in your computer. Dial *#06# in your phone to get the IMEI number. Note it down at the safe place as it may be required at a later stage.
•Connect your phone to the computer and then in the command prompt (shift+ right click in fastboot folder under "system c:/flashtoo"l, you now need to enter in the below mentioned command.
number 4)type this in "fastboot -i 0x0fce oem unlock 0Xkey", replace key with the key u obtained from the site
number5)“” •Ensure that the KEY which you have replaced with the IMEI is the correct IMEI number. After entering the above command in the command prompt, you need to then follow the on screen instructions so as to unlock the boot loader.
Congratulations, you have now successfully unlocked the boot loader of your device. Do let us know just in case if you need any assistance in the comments section as we will ensure that all your issues are sorted out at the earliest.
if u want to relock, search google again, google is not a "super dificult" search engine to use. hope it helps u
works?
works in 2.55 ics???
khoojunxiang said:
Number1) unlock bootloader, it is free and official from unlockbootloader.sonymobile.com
number 2) download flashtool, find it urself......
number3) Once clicked, you will then get a pop up where it will read “Are you really sure?”, click on “Yes, I’m sure” and there you go, you now need to open the command prompt in your computer. Dial *#06# in your phone to get the IMEI number. Note it down at the safe place as it may be required at a later stage.
•Connect your phone to the computer and then in the command prompt (shift+ right click in fastboot folder under "system c:/flashtoo"l, you now need to enter in the below mentioned command.
number 4)type this in "fastboot -i 0x0fce oem unlock 0Xkey", replace key with the key u obtained from the site
number5)“” •Ensure that the KEY which you have replaced with the IMEI is the correct IMEI number. After entering the above command in the command prompt, you need to then follow the on screen instructions so as to unlock the boot loader.
Congratulations, you have now successfully unlocked the boot loader of your device. Do let us know just in case if you need any assistance in the comments section as we will ensure that all your issues are sorted out at the earliest.
if u want to relock, search google again, google is not a "super dificult" search engine to use. hope it helps u
Click to expand...
Click to collapse
correct! If you want to acces root you now have to download http://forum.xda-developers.com/xpe...de-root-cwm-unlock-bootloader-custom-t2403929 that and run the runme.bat file. Connect your phone and you should be running ICS 4.0.4. I had the 89 when I rooted. Enable usb debugging, you can search on how to do that and after that you connect your device to your pc and click 1 on the runme.bat file and hit enter. Wait for the magic and if you are stuck at ''if succes i will tell you'' part, wich I was. Just unplug your phone, reboot and go to your appdrawer and find the ''make a copy and restore'' app and click on find a copy and click on ''root'' (something like that) and after that click restore. Reboot and then download kingroot, the latest is recommended. And roooooooot . After that you may want to replace the kingroot root authorizer with super su. This is optional but I recommend it. Follow http://androidmtk.com/replace-kinguser-with-supersu that tutorial and you should be good to go!
Well this thread is extremely old so I suppose it should be closed.

Categories

Resources