HElp please
I accidentally pull out the cable without disconnecting the connection between my phonen the computer.
Now i'm Unable to connect.
im using SGS II.
go to settings, then app development, go to usb debugging, deactivate it then reactivate it without the your phone connected to the pc
then connect your phone to pc again
I think that should do it
fingers crossed
You sir, are a genius. Many thanks!
wOWWWWW
Many tks mannn,,,,
One easy and faster solution....
I never mind that...
tks a lot!!!
try to connect with usb utilities
Hi.
Sorry to revive an old thread.
I have the same problem and his solution not work to me.
In software controller I see there are problems with MTP Device. I tried to reinstall Samsung Kies but not work.
Any solution?
Edit---
I tried in other pc (w7 always) installing Samsung Kies for first time and same problem. Maybe the mobile phone or Usb is corrupted/broken?
Im using CyanogenMod at the moment.
If your using cm9 mtp does not work at the moment
Sent from my GT-I9100 using xda premium
So.. then how can I install other Roms? Because I want to install CheckRom and I cant copy the files on my SGS2.
carfm5 said:
So.. then how can I install other Roms? Because I want to install CheckRom and I cant copy the files on my SGS2.
Click to expand...
Click to collapse
You don't need MTP to copy files. Use ADB.
Can you link me some info or where can I get it? Sorry if it is a typical question but I have no idea.
Thanks.
carfm5 said:
Can you link me some info or where can I get it? Sorry if it is a typical question but I have no idea.
Thanks.
Click to expand...
Click to collapse
Please refer to forum rule #1.
You can easily feed the terms "adb" "file" "copy" into google if you have issues with the search function of this site.
There are also multiple guides and FAQs linked in the sticky (first post) of the I9100 general section.
Sorry.
After I posted that, I started to use "search tool" and now I have my SGS2 with CheckRom It was really easy.
So, Thank You guys for the fast help. I was thinking my SGS2 was broken or something.
carfm5 said:
Sorry.
After I posted that, I started to use "search tool" and now I have my SGS2 with CheckRom It was really easy.
So, Thank You guys for the fast help. I was thinking my SGS2 was broken or something.
Click to expand...
Click to collapse
This is actually a pretty tough phone to break, flashing-wise. You have to be pretty dense (or REALLY not be paying attention) and try flashing a something that is intended for a different model of phone to break it. Though, that seems to be a fairly common scenario, unfortunately.
xirokx said:
go to settings, then app development, go to usb debugging, deactivate it then reactivate it without the your phone connected to the pc
then connect your phone to pc again
i think that should do it
fingers crossed
Click to expand...
Click to collapse
thanks a lot..............:d
Related
T-Mobile Samsung Vibrant, unrooted, running 2.1 with TouchWhiz.
Recently, my PC worstation stopped recognizing the phone when I plug in the USB cable. The phone battery will still recharge.
I've tried another cable, same result.
I'm wondering if the connector on the phone has gone bad? Any ideas?
I checked the other threads and didn't find an answer.
Thank you!
horngary said:
T-Mobile Samsung Vibrant, unrooted, running 2.1 with TouchWhiz.
Recently, my PC worstation stopped recognizing the phone when I plug in the USB cable. The phone battery will still recharge.
I've tried another cable, same result.
I'm wondering if the connector on the phone has gone bad? Any ideas?
I checked the other threads and didn't find an answer.
Thank you!
Click to expand...
Click to collapse
Get the correct drivers...download and install the drivers for this thread
http://forum.xda-developers.com/showthread.php?t=728929
Mr. Apocalypse said:
Get the correct drivers...download and install the drivers for this thread
http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
How do I know which Windows driver (64 vs 32) I need?
horngary said:
How do I know which Windows driver (64 vs 32) I need?
Click to expand...
Click to collapse
Gotta kno if your system is 32 bit or 64, should be in system info located in the control panel
Sent from my SGH-T959 using XDA App
horngary said:
How do I know which Windows driver (64 vs 32) I need?
Click to expand...
Click to collapse
chances are if you don't know...you probably need 32bit...normally if you try to install the wrong ones it'll let you know
Mr. Apocalypse said:
chances are if you don't know...you probably need 32bit...normally if you try to install the wrong ones it'll let you know
Click to expand...
Click to collapse
I installed the drivers. No change. What next?
reboot the computer lomfao dont forget to turn it back up ;PP
I installed the drivers. No change. What next?
So, shall we conclude that the connector on the phone is bad?
horngary said:
So, shall we conclude that the connector on the phone is bad?
Click to expand...
Click to collapse
While it is possible, it's not likely.
What exactly do you mean when you say it's not recognized?
Is USB Debugging enabled?
Have you tested with adb?
Have you tested with another computer?
Have you tested with another rom/kernel?
Almost all the time, USB connectivity issues can be solved by troubleshooting and eliminating possiblities through trial and error. Unfortunately there are many many factors involved since you have software and hardware of two devices as well as the cable itself involved.
MWBehr said:
While it is possible, it's not likely.
What exactly do you mean when you say it's not recognized?
Is USB Debugging enabled?
Have you tested with adb?
Have you tested with another computer?
Have you tested with another rom/kernel?
Almost all the time, USB connectivity issues can be solved by troubleshooting and eliminating possiblities through trial and error. Unfortunately there are many many factors involved since you have software and hardware of two devices as well as the cable itself involved.
Click to expand...
Click to collapse
Turning on Debugging worked. But why did I need to turn it on now? I didn't need to do so before.
I've searched but am unable to locate the answer to my issue.
I recently upgraded to a new computer. The old one was a 2GHz dual-core running Win 7 Home 64-bit. The new one is a 3GHz, i5 running Win 7 Ultimate 64-bit. For the life of me, I cannot get the USB driver to start.
On the SAMSUNG Mobile USB Composite Device properties I get "This device cannot start. (Code 10)"
I have downloaded, installed, uninstalled and reinstalled Samsung drivers from multiple sources, including the drivers from Samsung's site.
I've installed, uninstalled and reinstalled Kies multiple times.
I've moved the cable to different ports on the PC.
I've clicked debugging on/off
I've selected MTP instead of Mass Storage.
I've rebooted the PC and phone multiple times after these installations.
Nothing seems to help. I continually get the same error.
Anyone have a suggestion before I take this phone and throw it against the wall?
When I run into that issue, it usually turns out to be a busted USB cable.
Either switch the cable or inspect the port on your phone to see If all the pins are aligned
BROKKANIC said:
When I run into that issue, it usually turns out to be a busted USB cable.
Either switch the cable or inspect the port on your phone to see If all the pins are aligned
Click to expand...
Click to collapse
I appreciate the suggestion but it did not work.
n7slc said:
I appreciate the suggestion but it did not work.
Click to expand...
Click to collapse
Try uninstalling KIES and install KIES Mini to try and get the proper drivers installed.
If that doesn't work it may be an issue with the custom ROM and/or Kernel. I'd suggest flashing over to something else to see if that fixes the issue.
SOLVED!
BROKKANIC said:
Try uninstalling KIES and install KIES Mini to try and get the proper drivers installed.
If that doesn't work it may be an issue with the custom ROM and/or Kernel. I'd suggest flashing over to something else to see if that fixes the issue.
Click to expand...
Click to collapse
Well done BROKKANIC! It must have been the AOKP ROM I was using. I updated to the latest update and now the composite device is working. With my Captivate, Artix and SGSII, I've flashed ROMs hundreds of times and this is the first time I've ever run in to this problem.
Thanks for the suggestion!
Have same problem with Samsung Galaxy Ace S5830M, need help please, i don't know to do to fix conection with PC.
Note: sorry for my english, i'm use translator, don't speak english. xD
gilber1990 said:
Have same problem with Samsung Galaxy Ace S5830M, need help please, i don't know to do to fix conection with PC.
Note: sorry for my english, i'm use translator, don't speak english. xD
Click to expand...
Click to collapse
No we don't have your phone we can't help you
Sent from my SGH-I777 using Tapatalk 2
gilber1990 said:
Have same problem with Samsung Galaxy Ace S5830M, need help please, i don't know to do to fix conection with PC.
Note: sorry for my english, i'm use translator, don't speak english. xD
Click to expand...
Click to collapse
Ask in the appropriate forum for your phone please.
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app
Hello pretty nooby ;however, im stuck i recently wanted to try an older cm10.2 rom from the unstable newer ones and decided to go back to cm11 and i decided to reformat my data leaving me emptiness. I am now stuck with not being able to coneect to a device or external storage i can charge though. so please help any solution? im pretty sure i didnt enable mtp and put on debugging... Thx in advance
Edit: this phone doesnt support otg how may i cant connect adb it says waiting for device when i try to flash twrp
fizzlemcdizzle said:
Hello pretty nooby ;however, im stuck i recently wanted to try an older cm10.2 rom from the unstable newer ones and decided to go back to cm11 and i decided to reformat my data leaving me emptiness. I am now stuck with not being able to coneect to a device or external storage i can charge though. so please help any solution? im pretty sure i didnt enable mtp and put on debugging... Thx in advance
Click to expand...
Click to collapse
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
luqman98 said:
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
Click to expand...
Click to collapse
i enabled usb debugging
original cable
adb fast boot i tried to install...
luqman98 said:
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
Click to expand...
Click to collapse
im now installing the 4.3 drivers
this should fix it
fizzlemcdizzle said:
im now installing the 4.3 drivers
this should fix it
Click to expand...
Click to collapse
Did nada my device cant be recognized i get it recognized and a hazardous driver sign. I cant boot into os i reformatted data now im stuck in cwm and bootloader pretty unique also because this phone doenst allow otg helppp!!!
whilst trying to update the "Android" drivers it says the third-party inf does not contain digital signature verification
from this thread
http://forum.xda-developers.com/showthread.php?t=1583801
i also once im in cwm get a new driver name for my device ls970 my phone name
fizzlemcdizzle said:
whilst trying to update the "Android" drivers it says the third-party inf does not contain digital signature verification
from this thread
http://forum.xda-developers.com/showthread.php?t=1583801
i also once im in cwm get a new driver name for my device ls970 my phone name
Click to expand...
Click to collapse
Search for your LG's drivers at their website or around the net and install.
Sent from my GT-S5300 using Tapatalk 2
luqman98 said:
Search for your LG's drivers at their website or around the net and install.
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
i have now do i have to locate and update with this driver?
i have installed the drivers like 5 time and the wizard said it was installed succesfully now what do i do?
am i missing a step?
fizzlemcdizzle said:
i have installed the drivers like 5 time and the wizard said it was installed succesfully now what do i do?
am i missing a step?
Click to expand...
Click to collapse
Flash stock ROM here: http://www.mylgphones.com/sprint-lg-optimus-g-ls970-software-update-ls970zvc.html
Or I'm wrong?
I don't know why my device won't be recognized I heard it might be a kernal from another thread with a similar situation.
fizzlemcdizzle said:
I don't know why my device won't be recognized I heard it might be a kernal from another thread with a similar situation.
Click to expand...
Click to collapse
Man you really don't have a clue do you!!
Why in hell would you need OTG to flash a rom? Do you even know what OTG is?
Stop ignoring people that give you the solution too. It's really bad manners.
So download the stock rom and flash it.
You should spend a day reading up first before you damage the phone permanently.
Sorry if not being clear I have been listening my phone has a hardware issue and I'm not to much of a noob have tried each comment. I'm not to nooby but I have downloaded the drivers my device is not being recognized correctly I have a hazardous icon in device manager on my android phone lg ls970. My phone does not support otg I'm trying to install .zips through a flash drive and otg cable. I'm sorry if waisting peoples time with my apparently nooby question. Please c correct me if I'm wrong thanks for the support.
Let me be clearer I'm sorry for not spelling it out well enough. I have installed drivers many times I have installed the driver however my phone is not being recognized correctly I have uninstalled and tried again. Otg which I looked it up pretty handy in these situations, doesn't work for this phone (due to outputting)I had a cm10.2 kernal which may have had something do do with this. I have come to believe that its a hardware problem with the female port I will try again on another computer tomorrow and see.
What I want to know is why it still recognizes something and if its fixable?
Thx
I have fixed thanks luqman98 it was a problem with windows not allowing me to install drivers due to 8.1 update
http://www.winbeta.org/news/windows...ly-watermark-finally-removed-hotfix-kb2902864
thx
Hi, I have asked this question few months ago but i couldn't get the answer and also, somehow I couldn't login so I have made the account again and I have been searching around to find out the answer for my problem but I couldn't
I have few questions/issues.
I have Galaxy S3 (GT-9300). I have brought in it New Zealand but it was unlocked phone. So when I did was installing the omega rom, I found out that the rom it had was the rom from one of the europe countries (I can't remember)
I was wondering if I can install any GT-9300 stock rom to get back to stock rom phone or do I somehow have to find out which stock rom it had before?
The other question is that I was trying to reinstall and update the omega rom from the scratch by going to stock rom then installing the latest omega rom. But my phone somehow won't connect to the PC, it charges properly and I know its not the computer or cable 's problem. I have searched and searched on google but couldn't find any solution to resolve that. (Tried different versions of Kies, tried removing everything turning off the phone and restarting, tried to changed to tfs(?) mode and other stuff)
Because of that, I can't use Odin to change Roms or anything. Is there anything I can do to resolve this problem or changing Roms without connecting to the computer?
Currently, I have Omega v54.
Thank you so much
Go read the sticky thread in general forum, how to return to stock.
You can use any firmware for the i9300 but best is the latest for your country.
Sorry but the main problem is that my phone is not getting recognized by the computer so i cant use Odin to do that. Please read the whole contents
Try different versions of drivers.
Sent from my GT-I9300
What do you mean by different drivers?
I have tried all the USB 2.0 and USB 3.0 slots on my pc
but no luck.
The message i am getting is ' USB Device Not Recognized' 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message'
You have skipped several steps in the learning process. Go read the sticky thread in general forum, you'll need the correct Samsung drivers to connect your pc with Odin.
I did that while ago, and did that again this morning. uninstalled kies, installed latest Samsung USB driver. but exactly same as before.
same usb error message. and on the device manager, it shows up as unknown device.
another thing I found is that on *#7284# (Service mode) I can only find UART : MODEM, PDA USB: MODEM, PDA. (I have tried this with USB debug mode)
Kies stops Odin from working
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
jin0616 said:
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
Click to expand...
Click to collapse
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Stevica Smederevac said:
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
jin0616 said:
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Click to expand...
Click to collapse
Nothing special,just used by me and i know they must work
Sent from my Nexus 4 using XDA Free mobile app
---------- Post added at 22:25 ---------- Previous post was at 22:20 ----------
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Then it's something wrong either with usb cable,usb port(on Pc) or ,most likely,micro usb on your phone.
When you insert usb cable into micro usb port,try jerking it up and down,left and right but gently and listen will it make connection for a second,at least.
Sent from my Nexus 4 using XDA Free mobile app
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
jin0616 said:
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
Click to expand...
Click to collapse
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Try another usb cable, another usb port.
Stevica Smederevac said:
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. I will try to do that when I can get a chance.