I've searched but am unable to locate the answer to my issue.
I recently upgraded to a new computer. The old one was a 2GHz dual-core running Win 7 Home 64-bit. The new one is a 3GHz, i5 running Win 7 Ultimate 64-bit. For the life of me, I cannot get the USB driver to start.
On the SAMSUNG Mobile USB Composite Device properties I get "This device cannot start. (Code 10)"
I have downloaded, installed, uninstalled and reinstalled Samsung drivers from multiple sources, including the drivers from Samsung's site.
I've installed, uninstalled and reinstalled Kies multiple times.
I've moved the cable to different ports on the PC.
I've clicked debugging on/off
I've selected MTP instead of Mass Storage.
I've rebooted the PC and phone multiple times after these installations.
Nothing seems to help. I continually get the same error.
Anyone have a suggestion before I take this phone and throw it against the wall?
When I run into that issue, it usually turns out to be a busted USB cable.
Either switch the cable or inspect the port on your phone to see If all the pins are aligned
BROKKANIC said:
When I run into that issue, it usually turns out to be a busted USB cable.
Either switch the cable or inspect the port on your phone to see If all the pins are aligned
Click to expand...
Click to collapse
I appreciate the suggestion but it did not work.
n7slc said:
I appreciate the suggestion but it did not work.
Click to expand...
Click to collapse
Try uninstalling KIES and install KIES Mini to try and get the proper drivers installed.
If that doesn't work it may be an issue with the custom ROM and/or Kernel. I'd suggest flashing over to something else to see if that fixes the issue.
SOLVED!
BROKKANIC said:
Try uninstalling KIES and install KIES Mini to try and get the proper drivers installed.
If that doesn't work it may be an issue with the custom ROM and/or Kernel. I'd suggest flashing over to something else to see if that fixes the issue.
Click to expand...
Click to collapse
Well done BROKKANIC! It must have been the AOKP ROM I was using. I updated to the latest update and now the composite device is working. With my Captivate, Artix and SGSII, I've flashed ROMs hundreds of times and this is the first time I've ever run in to this problem.
Thanks for the suggestion!
Have same problem with Samsung Galaxy Ace S5830M, need help please, i don't know to do to fix conection with PC.
Note: sorry for my english, i'm use translator, don't speak english. xD
gilber1990 said:
Have same problem with Samsung Galaxy Ace S5830M, need help please, i don't know to do to fix conection with PC.
Note: sorry for my english, i'm use translator, don't speak english. xD
Click to expand...
Click to collapse
No we don't have your phone we can't help you
Sent from my SGH-I777 using Tapatalk 2
gilber1990 said:
Have same problem with Samsung Galaxy Ace S5830M, need help please, i don't know to do to fix conection with PC.
Note: sorry for my english, i'm use translator, don't speak english. xD
Click to expand...
Click to collapse
Ask in the appropriate forum for your phone please.
Related
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Can someone tell me in settings>wireless and network do you have USB Settings?
Lenks said:
Can someone tell me in settings>wireless and network do you have USB Settings?
Click to expand...
Click to collapse
Hey!
Nope!
CHEERS!
Lenks said:
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Click to expand...
Click to collapse
Do you have Samsung Kies ?
Sent from my Awesome Ace with fla.sh ROM and TAPATALK
I have KIES, i try on my PC, and on my Laptop. Reinstall KIES and drivers, nothing help. I read on google and i think is a cable problem, (same problem whit other android phones, like HTC) i purchase new one but will came after few weeks, so i need to wait If anyone have problem like this, or have any idea please share...
Typ *#7284# in your dialer.
And set both to pda.
Worked for my galaxy 3!
i think it came different menu... if someone hace other code...
The menu is named: phoneutil
It open "ServiceMode", if someone know proper code for "PhoneUtil" let share
Lenks said:
Hi since today when i connect my phone to the USB Cable it's only charging, i don't see USB mode... Did someone have same problem, i looking for solution pls
Click to expand...
Click to collapse
I have the same problem, it suddenly stopped working without any change in the environment or phone.
Does someone have a solution for this problem?
Thanks!
i had the same problem. I took a backup of the rom with cwm and restored it and it was working fine, dunno how
Guys you need the Samsung usb drivers ....only then ur pc will recognise the phone ...just google "android 2.3.4 for Samsung galaxy ace androidflip.com ..they share the drivers in the tutorial ...hope I helped ...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Lenks said:
It open "ServiceMode", if someone know proper code for "PhoneUtil" let share
Click to expand...
Click to collapse
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
async3 said:
I have the same problem, it suddenly stopped working without any change in the environment or phone.
Does someone have a solution for this problem?
Thanks!
Click to expand...
Click to collapse
Ok, It got solved yesterday this way:
You do not need to reinstall drivers on PC.
You do not need to reinstall ROM or anything on your phone.
You do not need *# special codes.
You do not need a new cable or change USB port or change your phone for a new one.
It seems to me that somehow (probably for debugging, connecting and disconnecting several times) the phone locks itself in a state where it is unable to connect again through USB although it charges.
So how did I solve it? I executed this actions several times even in different order some times: disabled debugging, disconnected cable, restarted phone, connected cable, (still not recognizing), tryed to USB Theter (even when the option was disabled), reenable debugging.
Out of nothing i noticed the USB icon was there again in my phone and i was able to debug copy files etc again.
I tried disconnecting and conneceting again and it kept working correctly.
I hope this helps someone else with the same problem and probably someone fixes the bug on the OS.
Cheers!
Hi There..
Newlly purchaused device from Ebay , GT-I9100, GB 2.3.4
Using the cable that came along with the device.
When I connect it to the PC it won't even recognize the device.
Nothing happen on the PC while on the device it say : MTP-connected"
Tried on multiple PC/Laptop with different OS.
Faulty device or is there anything else to do?
Ziv
Is Kies Installed ? Is Samsung Drives Installed ?
Paulius7 said:
Is Kies Installed ? Is Samsung Drives Installed ?
Click to expand...
Click to collapse
yes it is installed. the thing is that I would expect the PC to at least recognize the device and ask for drivers even if the drivers wasn't installed
Try another USB cable(If you can) try another USB port(Just for test)
Paulius7 said:
Try another USB cable(If you can) try another USB port(Just for test)
Click to expand...
Click to collapse
did that already and even tested the original cable with the Wife's HTC. The cable is fine.
Maybe tried to switch on Another mod not MTP.
Or try to enable USB debugging in Developer options
Paulius7 said:
Maybe tried to switch on Another mod not MTP.
Or try to enable USB debugging in Developer options
Click to expand...
Click to collapse
Already tried the debugging mode. How do I change to another mod not MTP?
wizardwiz said:
Hi There..
Newlly purchaused device from Ebay , GT-I9100, GB 2.3.4
Using the cable that came along with the device.
When I connect it to the PC it won't even recognize the device.
Nothing happen on the PC while on the device it say : MTP-connected"
Tried on multiple PC/Laptop with different OS.
Faulty device or is there anything else to do?
Ziv
Click to expand...
Click to collapse
Hi,
It happened with me too, and there is nothing wrong with the device, its fine.
My friend told me this,
update your Kies software to the latest version, then close the Kies. i mean the kies application should not be running.
Then connect the device and wait for sometime, till the message appears -- MTP connected.
Then open the Kies application, and let the Kies to identify the device.
If it says some error, like device not recognized, then there is an option to debug the connectivity.
Try that option too.
It'll connect surely, but you should be patient.
I think, its the problem with Kies software. I use it only to update the Android firmware. But now, I'm on Custom ROM, so this Kies is no more required for me.
Regards,
Hereticnine.
hereticnine said:
Hi,
It happened with me too, and there is nothing wrong with the device, its fine.
My friend told me this,
update your Kies software to the latest version, then close the Kies. i mean the kies application should not be running.
Then connect the device and wait for sometime, till the message appears -- MTP connected.
Then open the Kies application, and let the Kies to identify the device.
If it says some error, like device not recognized, then there is an option to debug the connectivity.
Try that option too.
It'll connect surely, but you should be patient.
I think, its the problem with Kies software. I use it only to update the Android firmware. But now, I'm on Custom ROM, so this Kies is no more required for me.
Regards,
Hereticnine.
Click to expand...
Click to collapse
Lets assume I wanna simply connect it as mass storage. shouldn't the device be idetified ? I mean it's as if the PC OS doesn't recognize it at all
As if it wasn't even attached to the PC.
EDIT: It doesn't recognize the device on debugging mod either
wizardwiz said:
Lets assume I wanna simply connect it as mass storage. shouldn't the device be idetified ? I mean it's as if the PC OS doesn't recognize it at all
As if it wasn't even attached to the PC.
EDIT: It doesn't recognize the device on debugging mod either
Click to expand...
Click to collapse
Correct. Even without Samsung USB drivers installed your PC (I guess running Windows) should show a reaction. At least the PC should report an unknown device.
Maybe you should try installing the drivers manually? Not sure if it's gonna help but might as well try, right?
If that doesn't work either maybe you should try contacting the one you got the phone from. Maybe there's something wrong with the particular device.
bi11ie said:
Maybe you should try installing the drivers manually? Not sure if it's gonna help but might as well try, right?
If that doesn't work either maybe you should try contacting the one you got the phone from. Maybe there's something wrong with the particular device.
Click to expand...
Click to collapse
OK, one last option. Can a Faulty ROM instillation cause the device not to connect to my PC?
Other than that I guess I should get a replacement for my device.
Thanks for your assistance guys
Hi
So, I have a samsung galaxy ace, which I haven't used for a while now. I decided its time to sell it. Problem is I flashed a custom rom (cyanogenMod 9) on it back then and it is also rooted. Before I sell it I need to unroot it and flash the stock rom back on. (Phone is working fine and is bootable)
So far I have unrooted it. As for flashing the stock rom, I'm having issues.
I have downloaded various versions of Odin (4.38, 4.34, 1.87), but none of them seem to detect the phone on my PC. I have downloaded the usb drivers and my PC itself seems to detect that its connected, but not Odin. I have Kies installed and have made sure it is not running through task manager.
So, can anyone PEASE help me with this. I'm not too familiar with Odin either, so I don't want to accidentally brick my phone.
Novark
AW: Issues flashing stock rom on Samsung Galaxy Ace
You need to use Odin 3.07 newer version WON'T work.
¿U mad bro¿
Android-fany said:
You need to use Odin 3.07 newer version WON'T work.
¿U mad bro¿
Click to expand...
Click to collapse
I just tried and its still not being detected
AW: Issues flashing stock rom on Samsung Galaxy Ace
Novark said:
I just tried and its still not being detected
Click to expand...
Click to collapse
Installed USB drivers?
Is the phone in download mode?
¿U mad bro¿
Android-fany said:
Installed USB drivers?
Is the phone in download mode?
¿U mad bro¿
Click to expand...
Click to collapse
Yes and Yes
Might be worth pointing out that I am running Windows 8 on my PC.
And my phone has cyanogenMod 7 not 9.
Also, I have just started receiving an error message when connecting the phone. It will charge it fine through the usb cable, but when in download mode it started giving the error message: USB device not recognised.
AW: Issues flashing stock rom on Samsung Galaxy Ace
Novark said:
Yes and Yes
Click to expand...
Click to collapse
Try reinstalling the drivers. Download Android SDK and install the "Google USB drivers" package.
¿U mad bro¿
I had this problem too the first time i tested Odin to see if it would detect my device. Make sure you're using a main USB port on the back of your computer, not any on the front/sides/ monitor etc. You might have to remove the USB and insert it a couple of times before it detects your device then it should install the required drivers allowing the device to be detected. I also did not use Kies for the drivers but downloaded a standalone installation package that you can find by searching in the forums.
Novark said:
Might be worth pointing out that I am running Windows 8 on my PC.
And my phone has cyanogenMod 7 not 9.
Also, I have just started receiving an error message when connecting the phone. It will charge it fine through the usb cable, but when in download mode it started giving the error message: USB device not recognised.
Click to expand...
Click to collapse
If windows is showing not recognise error in one port, it will most probably show it always like this
Try different port and reinstalling drivers with phone connected helps
And many times, drivers have to be installed many times
Hello pretty nooby ;however, im stuck i recently wanted to try an older cm10.2 rom from the unstable newer ones and decided to go back to cm11 and i decided to reformat my data leaving me emptiness. I am now stuck with not being able to coneect to a device or external storage i can charge though. so please help any solution? im pretty sure i didnt enable mtp and put on debugging... Thx in advance
Edit: this phone doesnt support otg how may i cant connect adb it says waiting for device when i try to flash twrp
fizzlemcdizzle said:
Hello pretty nooby ;however, im stuck i recently wanted to try an older cm10.2 rom from the unstable newer ones and decided to go back to cm11 and i decided to reformat my data leaving me emptiness. I am now stuck with not being able to coneect to a device or external storage i can charge though. so please help any solution? im pretty sure i didnt enable mtp and put on debugging... Thx in advance
Click to expand...
Click to collapse
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
luqman98 said:
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
Click to expand...
Click to collapse
i enabled usb debugging
original cable
adb fast boot i tried to install...
luqman98 said:
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
Click to expand...
Click to collapse
im now installing the 4.3 drivers
this should fix it
fizzlemcdizzle said:
im now installing the 4.3 drivers
this should fix it
Click to expand...
Click to collapse
Did nada my device cant be recognized i get it recognized and a hazardous driver sign. I cant boot into os i reformatted data now im stuck in cwm and bootloader pretty unique also because this phone doenst allow otg helppp!!!
whilst trying to update the "Android" drivers it says the third-party inf does not contain digital signature verification
from this thread
http://forum.xda-developers.com/showthread.php?t=1583801
i also once im in cwm get a new driver name for my device ls970 my phone name
fizzlemcdizzle said:
whilst trying to update the "Android" drivers it says the third-party inf does not contain digital signature verification
from this thread
http://forum.xda-developers.com/showthread.php?t=1583801
i also once im in cwm get a new driver name for my device ls970 my phone name
Click to expand...
Click to collapse
Search for your LG's drivers at their website or around the net and install.
Sent from my GT-S5300 using Tapatalk 2
luqman98 said:
Search for your LG's drivers at their website or around the net and install.
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
i have now do i have to locate and update with this driver?
i have installed the drivers like 5 time and the wizard said it was installed succesfully now what do i do?
am i missing a step?
fizzlemcdizzle said:
i have installed the drivers like 5 time and the wizard said it was installed succesfully now what do i do?
am i missing a step?
Click to expand...
Click to collapse
Flash stock ROM here: http://www.mylgphones.com/sprint-lg-optimus-g-ls970-software-update-ls970zvc.html
Or I'm wrong?
I don't know why my device won't be recognized I heard it might be a kernal from another thread with a similar situation.
fizzlemcdizzle said:
I don't know why my device won't be recognized I heard it might be a kernal from another thread with a similar situation.
Click to expand...
Click to collapse
Man you really don't have a clue do you!!
Why in hell would you need OTG to flash a rom? Do you even know what OTG is?
Stop ignoring people that give you the solution too. It's really bad manners.
So download the stock rom and flash it.
You should spend a day reading up first before you damage the phone permanently.
Sorry if not being clear I have been listening my phone has a hardware issue and I'm not to much of a noob have tried each comment. I'm not to nooby but I have downloaded the drivers my device is not being recognized correctly I have a hazardous icon in device manager on my android phone lg ls970. My phone does not support otg I'm trying to install .zips through a flash drive and otg cable. I'm sorry if waisting peoples time with my apparently nooby question. Please c correct me if I'm wrong thanks for the support.
Let me be clearer I'm sorry for not spelling it out well enough. I have installed drivers many times I have installed the driver however my phone is not being recognized correctly I have uninstalled and tried again. Otg which I looked it up pretty handy in these situations, doesn't work for this phone (due to outputting)I had a cm10.2 kernal which may have had something do do with this. I have come to believe that its a hardware problem with the female port I will try again on another computer tomorrow and see.
What I want to know is why it still recognizes something and if its fixable?
Thx
I have fixed thanks luqman98 it was a problem with windows not allowing me to install drivers due to 8.1 update
http://www.winbeta.org/news/windows...ly-watermark-finally-removed-hotfix-kb2902864
thx
Hi, I have asked this question few months ago but i couldn't get the answer and also, somehow I couldn't login so I have made the account again and I have been searching around to find out the answer for my problem but I couldn't
I have few questions/issues.
I have Galaxy S3 (GT-9300). I have brought in it New Zealand but it was unlocked phone. So when I did was installing the omega rom, I found out that the rom it had was the rom from one of the europe countries (I can't remember)
I was wondering if I can install any GT-9300 stock rom to get back to stock rom phone or do I somehow have to find out which stock rom it had before?
The other question is that I was trying to reinstall and update the omega rom from the scratch by going to stock rom then installing the latest omega rom. But my phone somehow won't connect to the PC, it charges properly and I know its not the computer or cable 's problem. I have searched and searched on google but couldn't find any solution to resolve that. (Tried different versions of Kies, tried removing everything turning off the phone and restarting, tried to changed to tfs(?) mode and other stuff)
Because of that, I can't use Odin to change Roms or anything. Is there anything I can do to resolve this problem or changing Roms without connecting to the computer?
Currently, I have Omega v54.
Thank you so much
Go read the sticky thread in general forum, how to return to stock.
You can use any firmware for the i9300 but best is the latest for your country.
Sorry but the main problem is that my phone is not getting recognized by the computer so i cant use Odin to do that. Please read the whole contents
Try different versions of drivers.
Sent from my GT-I9300
What do you mean by different drivers?
I have tried all the USB 2.0 and USB 3.0 slots on my pc
but no luck.
The message i am getting is ' USB Device Not Recognized' 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message'
You have skipped several steps in the learning process. Go read the sticky thread in general forum, you'll need the correct Samsung drivers to connect your pc with Odin.
I did that while ago, and did that again this morning. uninstalled kies, installed latest Samsung USB driver. but exactly same as before.
same usb error message. and on the device manager, it shows up as unknown device.
another thing I found is that on *#7284# (Service mode) I can only find UART : MODEM, PDA USB: MODEM, PDA. (I have tried this with USB debug mode)
Kies stops Odin from working
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
jin0616 said:
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
Click to expand...
Click to collapse
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Stevica Smederevac said:
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
jin0616 said:
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Click to expand...
Click to collapse
Nothing special,just used by me and i know they must work
Sent from my Nexus 4 using XDA Free mobile app
---------- Post added at 22:25 ---------- Previous post was at 22:20 ----------
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Then it's something wrong either with usb cable,usb port(on Pc) or ,most likely,micro usb on your phone.
When you insert usb cable into micro usb port,try jerking it up and down,left and right but gently and listen will it make connection for a second,at least.
Sent from my Nexus 4 using XDA Free mobile app
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
jin0616 said:
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
Click to expand...
Click to collapse
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Try another usb cable, another usb port.
Stevica Smederevac said:
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. I will try to do that when I can get a chance.