Could anyone give me a link for galaxy tab 10.1 3g version 7500 stock rom. I have bought the tab from India. If the same country rom link, will be a bonus
I would also make a question of what makes a rom capable of 3G, the rom or the kernal?
Test the broodcomb
http://forum.xda-developers.com/showthread.php?t=1233328
lundstrom.emil said:
I would also make a question of what makes a rom capable of 3G, the rom or the kernal?
Test the broodcomb
http://forum.xda-developers.com/showthread.php?t=1233328
Click to expand...
Click to collapse
Using it. But when i connect to kies it says cannot start the service on device reconnect and start. Reconnecting again ,same message
Related
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
ProNewb said:
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
Click to expand...
Click to collapse
Check your APNs to see if they changed or got wiped out?
ctomgee said:
Check your APNs to see if they changed or got wiped out?
Click to expand...
Click to collapse
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2. I live in Rep. of Ireland.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
ProNewb said:
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Click to expand...
Click to collapse
sxi200 said:
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Click to expand...
Click to collapse
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
ctomgee said:
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
Click to expand...
Click to collapse
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
ProNewb said:
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
Click to expand...
Click to collapse
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
sxi200 said:
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
Click to expand...
Click to collapse
Well, i did go back and flash the jpkj2 2.3.5. and still no connection.
will try from an open place again later.
i have an issue with my internet connection too. i got an I9100(international version) and things were perfect till i switched to 4.0.3 and since then, my internet just refuses to connect although i have full signal strength and 3G or H displayed. but there is nothing going through.
it works again after i switch to airplane mode and back. i have no issues with wifi.
i have tried many modems and roms. i am currently using the KI4 rom and it still gives me issues.
please help.
update on situation
Hi guys,
just an update on my situation. Had the phone sent to Samsung twice for a check and bothe times it came back perfect with test sheets showing all was perfect. I decided to have another check done on the phone and it now says that the phone is blocked!! What the hell!. When i checked first weeks ago all was good and now it says it's blocked, but i'm getting 2g signal, surely i should be getting nothing if it's barred.
I have no idea who the origional service provider was of the phone, is there any way of finding out who the origional provider was or is there any way of removing this barring?
Thanks
Hello what is the best radio (modem) for Note Bell ICS ? UCLF6? .. i am still new to it but after ICS official on my Bell note (SGH-I717M) the modem or communication signal is not working intermittently when using LTE signal and when it happens i have to reboot my phone ..
I thought that maybe by upgrading the modem (signal) it would go better but what would be the best for Bell Galaxy note ICS ?
I have seen things like UCLA4 or UCLF6 ... but honestly i cannot know which one for Bell and what is the best one ...
Thanks
zykio said:
Hello what is the best radio (modem) for Note Bell ICS ? UCLF6? .. i am still new to it but after ICS official on my Bell note (SGH-I717M) the modem or communication signal is not working intermittently when using LTE signal and when it happens i have to reboot my phone ..
I thought that maybe by upgrading the modem (signal) it would go better but what would be the best for Bell Galaxy note ICS ?
I have seen things like UCLA4 or UCLF6 ... but honestly i cannot know which one for Bell and what is the best one ...
Thanks
Click to expand...
Click to collapse
I was on perfection roms for a whicle and had tried pretty much all the firmwares. So far the best one is the Stock ICS one.
if someone can post a guide on how to extract the modem, i can do it tomrrow for you.
Would it be the UGLF4 ? the one you are talking about .. as it is the one i have for Stock OTA Bell Galaxy note with ICS ..
Do you know so far if LTE has issues with ICS ?
My other question would be UCLF6 is it for Bell or ATT only or such or for any carrier ?
Thanks
I'm also having the same issue as you. I upgraded to ics on my bell note and sometimes it won't register the network and I would have to reboot.
Sent from my SGH-I717M using xda app-developers app
thats correct it its : I717MUGLF4
Someone could say what it would do if i would flash the modem to UGLF6 or UCLF6 (could make a typo) ? ... would it work good with Bell and be ok ? or just for ATT ?
By the way ... so far if i block the network to get anything but LTE . it seems ok ..
So it seems to be a problem between that version and LTE network .. but i am just a beginning in cell phone .. could not tell for sure
All the the Note modems have the LTE issue unfortunately. I have the same issue and the issue was widespread on all the roms and modems I have tried since May (mostly UCLE and UCLF modems).
On all of those modems, I had to disable LTE to get a solid signal. I did this with a dialer code. If you keep the stock Bell modem and rom, you don't need the dialer method...just go into mobile networks and select GSM/HSPA(AUTO) option (this option did not exist via the settings panel on the 4-5 other ICS roms I used)
The other concern I have now is that I flashed the modem of my bell g note with UCLF6 and when I tried to flash to BMUCLF4 bell. ... IT works but then when I reboot it still remains UCLF6 as a baseband. ...
Sent from my SGH-I717M using xda app-developers app
First of all i have a Galaxy s2 with MIUI rom on an o2 network with 1gb data monthly. here's my problem whenever i switch the tethering on or the wifi hotspot my laptop and my new ipad connects to it but as soon as i get on the internet browser it says theres no internet connection? is this a problem with my network (o2) or with the custom rom (miui) that i've installed on my phone? i can browse internet on my phone with no problem using the internet data from my network but it wont let me tether
anyone?
kmarkb_8017 said:
First of all i have a Galaxy s2 with MIUI rom on an o2 network with 1gb data monthly. here's my problem whenever i switch the tethering on or the wifi hotspot my laptop and my new ipad connects to it but as soon as i get on the internet browser it says theres no internet connection? is this a problem with my network (o2) or with the custom rom (miui) that i've installed on my phone? i can browse internet on my phone with no problem using the internet data from my network but it wont let me tether
anyone?
Click to expand...
Click to collapse
after reflashing to stock rom, wifi hotspot is back but as soon as i changed to siyah kernel 3.5.2, tethering is not working again
how do i restore the stock kernel from this firmware? i cant find it anywhere. or how do i flash just the kernel? so far i've tried several kernels, siyah, dark knight and even the latest stock ics kernel from 4.0.4 firmware but none allowed me to use tethering or wifi hotspot
I9100PXXLPH - O2U
Region: United Kingdom
Carrier: O2
Device: Samsung Galaxy S II GT-I9100P with NFC
Product Code: O2U
Latest firmware: I9100PXXLPH/I9100PO2ULP4/I9100PXXLPC/I9100PXXLPH
Version: Android 4.0.3 Ice Cream Sandwich
Build: 4/26/2012 4:35:52 PM
Stock ROM Download: GT-I9100P_ICS_4.0.3_O2U_I9100PXXLPH_I9100PO2ULP4_I9100PXXLPC
i manage to extract the z image from the stock rom where the tethering is working. my problem now is how do i flash this kernel or how do i convert it to a tar file, i tried flashing it through cwm but for some reason it wont it says i have to report it to rom manager for support.
anyone please? i wouldnt be asking if i found it on google
I got the SIII i9300 and I upgraded it recently to 4.1.2. I don't know if it's from the upgrade or from my new carrier but I got some horrible signal (including indoors). It will show H and full bars, but when I try to call out the bars drop, it goes from H ro G and even a lost signal. So I don't know if its a ROM issue (it was a rooted stock BTW) or the radio needs a update.
Any thoughts? The provider is Play in PL.
Sv: Bad signal
jason8612 said:
I got the SIII i9300 and I upgraded it recently to 4.1.2. I don't know if it's from the upgrade or from my new carrier but I got some horrible signal (including indoors). It will show H and full bars, but when I try to call out the bars drop, it goes from H ro G and even a lost signal. So I don't know if its a ROM issue (it was a rooted stock BTW) or the radio needs a update.
Any thoughts? The provider is Play in PL.
Click to expand...
Click to collapse
Maybe incorrect RIL?
Sent from my GT-I9300 using xda app-developers app
OK. Found a link here with a 4.1.2 PL unbranded RIL.
XXELKC
Android:4.1.2
Date: 30/11/2012
Carrier-Country-Region: Unbranded - Poland - Europe
How do I install it?
Currently running:
GT-I9300
4.1.2
baseband:I9300DXELK1
build: JZO54K.I9300XXEMA2
Use Odin
OK.
Ill give that a try. It seems my ROM is a SG version :d'oh:
If it doesn't work I'll reflash my ROM with the PL unbranded which has the correct RIL.
jason8612 said:
OK.
Ill give that a try. It seems my ROM is a SG version :d'oh:
If it doesn't work I'll reflash my ROM with the PL unbranded which has the correct RIL.
Click to expand...
Click to collapse
Theres an app called getril where you can auto-match modem & RIL or just check if they are compatible if you dont have root.
I don't know where you live but I can recommend you to try out the XXELLA baseband / modem - simply the most battery and signal reception friendly baseband for the Samsung Galaxy S3. Do not forget downloading and installing correct RIL thru getril-app from Google Play for stable signal reception..
Galaxy S Duos
gt s7562
SSN S7562GSMH
Rooted, installed cwm, flashed new room.
After dialing a number the call stays only a few second and than disconects. It says out of service area. Than when i try dialing again it says mobile network not available.
Cant find the stock firmware anywhere, even on sammobile firmware list.
I flashed 3 different rooms and the same problem with calls.
Where can i find the stock firmware for S7562GSMH? Or any other solution for custom rom.
I tried PMP_Ultra_ROMv1, PMP_Light_ROMv7 and KOR-Release-340. Same problem.
i've got the same problem... did you managed to find a working firmware?
where the hell is SMH anyway? I bought my phone in Malaysia, but I believe it was an import phone.
Edmiri said:
Galaxy S Duos
gt s7562
SSN S7562GSMH
Rooted, installed cwm, flashed new room.
After dialing a number the call stays only a few second and than disconects. It says out of service area. Than when i try dialing again it says mobile network not available.
Cant find the stock firmware anywhere, even on sammobile firmware list.
I flashed 3 different rooms and the same problem with calls.
Where can i find the stock firmware for S7562GSMH? Or any other solution for custom rom.
I tried PMP_Ultra_ROMv1, PMP_Light_ROMv7 and KOR-Release-340. Same problem.
Click to expand...
Click to collapse
OK, I got it working with this stock ROM.... S7562XXBMJ1
Ensure baseband is same or higher
Many ROM developers specify the baseband you should use while flashing the ROM. Always ensure this is same or higher to that. From my personal experience higher baseband worked for me. Also, ensure formatting of cache and dalvik cache.
For those who face issues in rooting, i have written a detailed guide. Please find below.
techareena.wordpress.com
johnoha said:
OK, I got it working with this stock ROM.... S7562XXBMJ1
Click to expand...
Click to collapse
I got the same problem too.. Can you give me the link which region you use??