Good day! just like to ask how can i fix the multi-touch screen on my viewpad 7 after ROM change. the unit was just given to me by my cousin with issues already (multi-touch screen problem) unfortunately, default rom were not saved. please help me. Thank you!
Can you be more specific about your screen problem(s) - i.e. not responding at all? What rom is it running now? Identifying info from the label on the back of the device?
MY CW Recovery v2.5.1.2
i'm currently using TJ style by downloading update 2.2.2 boot.zip and update_tj.zip to my SD
only the screen nearer to the navi keys are working. i have to put two fingers if i have to select icons (by chance)
my procedure:
1. i format/ partition my SD card (1024-0M)
2. i copied update 2.2.2 boot.zip and update_tj.zip to my SD
3. i use CW recovery and choose "install zip from SD" first update_tj.zip and immediately update 2.2.2 boot zip before i reboot
after rebooting, i cannot use multi-touch screen.
the vpad7 was just given to me by my cousin having problem with no touch sensitivity at all. worst, he did not backup the original ROM. i even try amalgation euviepad7 1.7b.zip but still no response. please help thanks in advance! i'm a newbie in configuring this device so if you can help me in step by step procedure would be a big help. thanks and happy new year to everybody!
my viewpad 7
model no VS13761
2011-04-06
FTM
SWVER=3.620
MODEL: FM6-001
HWVER: 106
I've flashed euviepad7 1.7 and the touch screen failed to function too. Then I've flashed euviepad7 1.7 ITE and the problem was solved.
darthstrider i got the same problem i dont think it got anything to do with software because it worked fine with stock or custom rom`s i send my viewpad in for repair waiting for it to return
Well just got it back 30 min ago.it works i think it`s a otherone only its got a red dot in the screen now gonna contact viewsonic again that dot wasnt there bevoure
Well just got it back 30 min ago.it works i think it`s a other one only its got a red dot in the screen now gonna contact viewsonic again that dot wasnt there bevoure no response on the ite drivers
i even used euviewpad 1.7b ITE and it works fine after a few hours then went back with the same problem after i accidentally left it in my bag and had scanned in a bag check. then after that, i cannot restore it again... maybe i missed one of the procedure specially the flashing or the the oneclick root. can you just give me detailed step by step procedure? thanks! Sadly i don't think we have a viewsonic service center here in the philippines specifically for viewpad 7. I'll try to re-install euviewpad7. thank you very much everybody and happy new year!
darthstrider said:
i even used euviewpad 1.7b ITE and it works fine after a few hours then went back with the same problem after i accidentally left it in my bag and had scanned in a bag check. then after that, i cannot restore it again... maybe i missed one of the procedure specially the flashing or the the oneclick root. can you just give me detailed step by step procedure? thanks! Sadly i don't think we have a viewsonic service center here in the philippines specifically for viewpad 7. I'll try to re-install euviewpad7. thank you very much everybody and happy new year!
Click to expand...
Click to collapse
Happy New Year of 2012, just realized that for many in Asia - it has arrived.
Ok, back on topic - it sounded like the problems isn't a software/firmware and/or ITE or non-ITE issue, but rather, just a defective display that need to be exchanged/repaired at VS's authorized service center. The newest EU v1.7 ROMS is very smooth with a choice of both ITE and non-ITE ("older") kernel and virtually free of any issues, been running mine on it for past 3 months with A2SD running, everything just worked (except for Adobe Flash 10.x of course.)
As a last resort, use the earlier posted thread's link to download the utility & stock/oem firmware to restore/reflash it - and if that still doesn't work, the choice is (unfortunately) to send it back for a warranty claim based on your region's prcoedures.
thanks a lot sir! i will send my unit back for repair today. yup! i guess it has defective screen. thanks a lot sir and happy new year to all!!!
Hello guys (and dolls), i'm new here, my name is Leo, and last week I got my sons Galaxy I (GTI9000) with, if I remember well Froyo 2.3.
This is way too old, and so, the last couple of days I've been trying to look for how to change (root) this.
I followed the path here and (with the aid of some) got as far as working with Android SDK dev kit, and Odin 3 1.83.
It looked ok, but i'm a bit stuck.
Sure hope, i'm at the right stop here, otherwise please forward this to the correct place, moderators.
Q1: I now have a (vol- + home + on) way to set the phone in download, which I succesfully used to download a second copy of a bootloader (P-SBL.tar.md5.tar) as I thought the first didn't really got in as it should. This is because I can't get the recovery (vol+ + home + on) to get to work.
It just won't start, also after the dl of the first bootloader, and the 'new' one, I get all kinds of colorfull lines during startup, which I didn't have before?
Q2: The obvious goal is to replace the Rom with the Cyan or Darky, I see good things about both, still Cyan (the ver 7 stable one) seems the best?
Q3: In the stufff I read here, SuperOneClick (in case of Cyan, if I remember well) should do the root and dumping, so I guess I'm still not rooted, could this have anything todo with Q1?
Thanks in advance, and the patience to help a noob, well, bit more then that,
Leo.
Hi there freaks,
I'm an owner of this chineses piece of... art. And um it's kinda laggy so I decided to use the Greenify and SDMaid apps to get it to better shape. After spending few days in a row trying to find a way to get it rooted, I've found this forum and the thread where they presented a way to root most of the tablets on the market. Well I was scared cause I did not find a single tip about how to turn back the changes (in case I'll brick it-my wife would kill me;p), any way I decided to give it a shot and it worked. I keep getting info that root was not found sometimes but I need to reboot it and start over and in fact it seems to be rooted.... anyway I need to speed it up a bit more.
Can I install the CyanogenMod on it? And I can - which partical version will work fine with my tablet? I've found CM roms for Sanei N10, Sanei N83, N90 etc etc but nothing for N77. I can't even compare the roms cause I have no idea what is the exact hardware installed in it and don't know any way to find out. I could look for a specific CM rom that has drivers to my device but don't know what's installed in it. I know that there is probably no way to get back to the original Android 4.0.3 ICS which I have installed right now.
All I can provide you with is the model name and basic info like:
Device name: Sanei N77 Elite
CPU: Allwinner A13 1.5GHz
GPU: Mali -400MP
RAM: 512 DDR2
Int.Memory: 8GB
Display: IPS WVGA 800x480px, TFT
Wifi: 802.11bgn
No 3G support - but they say I can have it working with these modems: E1916, ZTE AC2736, HUAWEI E1750, HUAWEI EC122, HUAWEI EM770W
Thank You for Your attention and possible help
---> anyone?
I have this piece of art as well.
After a lot of hassle and searching around I managed to boot CM10 on it. (just need a few patches to make it fully working, was too lazy at first)
Basically all you need is this:
http://forum.xda-developers.com/showthread.php?t=1886460 - ROOT, select old special or new standart root, whatever works (depends on firmware installed)
http://forum.xda-developers.com/showthread.php?t=2189640 CWM based recovery
http://forum.xda-developers.com/showthread.php?t=2343531 CM10 ROM for Allwinner A13 Tablets + patches
BTW, if you boot into recovery, format system and then reboot tablet without any ROM flashing, it will become bricked as there is no way entering recovery mode without adb (as far as I know) on this piece of art. In this case you would have to flash one of the stock firmwares (download flashing package from there) and then do everything all over again (root+install cwm)
EDIT: Since my touchscreen is not working now (haven't flashed patch for it in the first place) and as it turned out USB debugging in this CM10 build is off by default (so I don't have access to ADB nor CWM), I need now to do this whole process all over again, lol.
EDIT2: It turns out there is not patch for ft5x_ts (touchscreen included), gonna pull it from stock fw and make flashable zip, will upload it here as well.
Ok I found it there http://forum.xda-developers.com/showthread.php?t=2189569
just found out some one replied to my post here i already gave up on modding this but i will check it all again when i get back to my pc. do you have it working finally? how is the performance with cyanogenmod? thanks mate
k i'm reading it all now, lot of things are not clear enough for me yet, can you lead me step by step? or do you have a ready working image of the system that i could simply flash into this tablet? how? thank you
im stuck on installing cwm it installed perfectly fine but when im trying to enter cwm on booting nothing happens except the ics is loaded in emergency mode....
btw this tablet has only 3 buttons which is power. vol+,vol-. no enter button at all... could you help me on this?
survivor1986 said:
just found out some one replied to my post here i already gave up on modding this but i will check it all again when i get back to my pc. do you have it working finally? how is the performance with cyanogenmod? thanks mate
k i'm reading it all now, lot of things are not clear enough for me yet, can you lead me step by step? or do you have a ready working image of the system that i could simply flash into this tablet? how? thank you
im stuck on installing cwm it installed perfectly fine but when im trying to enter cwm on booting nothing happens except the ics is loaded in emergency mode....
btw this tablet has only 3 buttons which is power. vol+,vol-. no enter button at all... could you help me on this?
Click to expand...
Click to collapse
Please... anyone?? Cant install CWM, tablets boots normally but in emergency mode instead of CWM While using built-in recovery mode I cant do anything except navigating Up and Down in the android recovery menu Power button does nothing in this case....
HELP!!!!!!))
will the external usb keyboard work in the recovery mode??? i will buy one in that case...thanks
Hi everyone,
I bought a No.1 X2 (001mobilephone) about 3 months ago, I have tried every version I can of PC > Phone rooting software and .apk's plus tried using a few similar tools that use ADB. (inc kingoroot, kingroot (chinese), SRS, oneclickroot, towel, androidroot, etc)
I cannot get the phone rooted and I do not want to wait, phone-less, for a month (at least a month to send to the manufacturer who was supposed to have rooted before it was shipped - and who knows if they will send it again without root).
the phone (may?) seams to have partial root, when i installed led manager, and have since done a wipe, the led settings seamed to have stayed with my custom email and other notification colours.
Specs/software is:
Qualcomm MSM8916
android 4.4.4
Kernal 3.10.28
[email protected] #2
Thu Jan 29 09;58:34 cst 2015
Anyone able to help?
Thanks
Markatkins said:
Hi everyone,
I bought a No.1 X2 (001mobilephone) about 3 months ago, I have tried every version I can of PC > Phone rooting software and .apk's plus tried using a few similar tools that use ADB. (inc kingoroot, kingroot (chinese), SRS, oneclickroot, towel, androidroot, etc)
I cannot get the phone rooted and I do not want to wait, phone-less, for a month (at least a month to send to the manufacturer who was supposed to have rooted before it was shipped - and who knows if they will send it again without root).
the phone (may?) seams to have partial root, when i installed led manager, and have since done a wipe, the led settings seamed to have stayed with my custom email and other notification colours.
Specs/software is:
Qualcomm MSM8916
android 4.4.4
Kernal 3.10.28
[email protected] #2
Thu Jan 29 09;58:34 cst 2015
Anyone able to help?
Thanks
Click to expand...
Click to collapse
Chinaphonearena.com: Sponsor Forums Official No.1® Forum NO.1 X-Men X2 4G LTE rugged 3-proof Smartphone
Hi, same phone, same problem. The above site might be interesting for you. No.1 supplies Qualcomm software and the phone's firmware with a tutorial to root. I succeeded in putting firmware on a bricked X2, but still did not get root access. But I am a newby, so give it a try. Good luck
UNBRICK no.1 x2 using original ROM
Thanks for this, i now have access to the ROM, and if you can understand the instructions its possible to install the ROM again.
I just did this today, however its partially rooted, as was my phone when I received the X2.
I need to now try to use kitchen and a bunch of other tools as described here to try and install Su and/or root the rom: en.miui.com/thread-21539-1-1.html
if i am sucessful i will post instructions, for now here are clear instructions on how to (should work as tested on my x2) unbrick X2 with this software.
1. download this: "ht tps: SLASH SLASH drive DOT google DOT com SLASH file SLASH d SLASH 0ByeMRyNUHsNRdGc0Qk1jQlJIb3c SLASH view" (i have less than 10 posts so cannot type full url, replace SLASH SLASH with // and DOT with .)
2. extract the rar (download trial of winrar or similar to extract (noobs))
3. launch the setup.exe from the folder you extracted too. (remember where it is installed)
4. extract the X2.rar to a folder (new folder on desktop or my docs)
5. right click (win 7, 8 10) and run as admin (the installed program from desktop called "QMSCT")
6. open the "setup" menu in QMSCT and click "configuration"
7. make settings look like the picture in: "ht tp s: SLASH SLASH drive . google . com SLASH file SLASH d SLASH 0B2M8OmUI5XS-SGtudHYwS0tLZGc SLASH view?usp=sharing"
all check boxes and fixed options must be identical, i have highlighted red
8. insert (red again) the file names shown in the picture (they will be in the original extracted rar where you launched the setup program or in the directory you installed to).
9. in the bottom field locate the folder where you extracted the x2.rar, this folder location is the folder you must browse to and select in the bottom of the settings screen. Only care about the red markings i made, i will now tell you below how to get the information you cannot change yet in the settings.
10. first SAVE, exit the settings, then exit program.
11. plug in no.1 X2 Mobile, while phone on hold power until options appear, then hit restart, before it turns off and vibrates, hold down both volume buttons and then also press and hold power... do'nt let go until phone vibrates and turns on to a blank screen... sometimes it will restart, just do it over again and again until it boots up blank (screen has lit up back/grey)
12. when screen blank windows will install driver. NB: Unfortunatly i had issues here and it took a windows 10 tech preview install 10041 build x64 to do this, however it did not get fiddly i just had to try xppro, win 10x64 on a laptop and then my desktop to work it out, also I was following chinese instructions that had been translated and were not perfect to begin with. So any win 7, xp or 8 might need to source which driver to install from no.1. Windows 10 tech preview is free and can be put on another partition easily if you search (noob) on xda or google i am sure someone will have covered it.
13. unplug phone, launch QMSCT again as admin, go into settings and click "Start setup process" then click ok on dialogue box. now plug in phone and hold vol buttons again, then power and hold all 3 down until it reboots into the blank screen. if all works a port will be found (1-8 i think i saw in my many attempts) once it has found it and you see the information on the screen look similar to my screen shot, click on save. note your port will maybe differ, and if it does not work, restart application and phone again and repeat. when it saves, exit configuration, exit application and then you need to restart application
14. if all is right, plug in phone, hold the 3 buttons in order again, and the application will start flashing it. DONT UNPLUG UNTIL RED OR GREEN shown in app.
RED=fail - go back through my instructions and the supplied "flash tutorial.docx" in the RAR (you extracted this at the begining - the pictures may help more than the instructions they gave)
GREEN=Woohoo! all done, unplug phone and do the power button combo, it will restart (might need to do combo a few times)
NB: settings stay the same once this application is set up, so you do not need to go through all again in future, just launch app and then plug in phone and do 3 button combo.
I hope this helps, if you are good with CUSTOM ROM creation, feel free to see if you can get this rom rooted and flashed and tell me/readers of this forum... if anyone wants a real challenge, root this rom, make the kernal 64bit and not 32bit and then post here.... this is what I want to do eventually if i can work it out.
good luck any bricked x2 owners
Fixed X2 boot loop and not being recognised while bricked
Mjfh said:
Chinaphonearena.com: Sponsor Forums Official No.1® Forum NO.1 X-Men X2 4G LTE rugged 3-proof Smartphone
Hi, same phone, same problem. The above site might be interesting for you. No.1 supplies Qualcomm software and the phone's firmware with a tutorial to root. I succeeded in putting firmware on a bricked X2, but still did not get root access. But I am a newby, so give it a try. Good luck
Click to expand...
Click to collapse
Ok so if you are still bricked (as I temp was) use this program: qtadb . wordpress . com SLASH download.
it fixed my x2 which was in boot loop, could not use adb or the flash program to even see it, win 10 was not recognising anything driver wise.
just extract from the x2.rar with all the boot img etc: boot.img and recovery.img
locate most recent android sdk/platform tools folder when asked for it
click on the corresponding "flash recovery" in qtadb and locate the extracted image, do the same with the boot img tab and find your boot img
that's the order i did it in, i may have reset phone between them and cleared cache by holding vol+ and power and using boot loader. I had installed an msm8916 file to root, that apparently does not... ah well we live and learn.
looking for solution to turn that x2.rar into a rom.zip as kitchen does not work with it. maybe im doing something wrong?
anyway phone on again so the search continues...
X2 missfunctions.
Markatkins said:
Thanks for this, i now have access to the ROM, and if you can understand the instructions its possible to install the ROM again.
I attached a Word Document with information and questions about this X2 device, which is too hard to recover to update ... and an buch of missfunction. ( camera error : can't connect to the camera; 4G LTE does not function, only 3g; battery life normal as 2000 mAh; )
I expect your answer or comments very soon.
Best Regards.
tomas abrego garcia.
Click to expand...
Click to collapse
X2 reset successfuly - EASY way
I attach PDF files with instructions to reset the phone X2.
I expect very soon someone help us to ROOT it !!!!
Best Regards.
help!!
Hi
This forum is the closest thing I have found which might help me in my problem to fix my 1 week old X2.
I really enjoyed using it - I got it 2 weeks ago - and it was working fine for all the week then last weekend I had a few apps running and the screen froze. I rebooted the phone but it just stayed black and never came on again. It is a stock standard phone - and it has not been rooted or modified in any way. Someone suggested removig the battery then refitting it.
How is that done?
Is that a good thing to do?
What else can I try?
Has anybody any idea on what might have caused this?
I'm stuck!
Jeff_T said:
Hi
This forum is the closest thing I have found which might help me in my problem to fix my 1 week old X2.
I really enjoyed using it - I got it 2 weeks ago - and it was working fine for all the week then last weekend I had a few apps running and the screen froze. I rebooted the phone but it just stayed black and never came on again. It is a stock standard phone - and it has not been rooted or modified in any way. Someone suggested removig the battery then refitting it.
How is that done?
Is that a good thing to do?
What else can I try?
Has anybody any idea on what might have caused this?
I'm stuck!
Click to expand...
Click to collapse
Hi,
I have one as well: it is indeed fun to play with but it is not reliable. I had multiple issues with it in the past months. Therefor my advice is: send it back and claim your guarantee (especially if you want to use it as your primary phone). Otherwise use the unbrick advice from markatkins earlier in this thread (but you have to feel secure with android)
good luck
Mjfh said:
Hi,
I have one as well: it is indeed fun to play with but it is not reliable. I had multiple issues with it in the past months. Therefor my advice is: send it back and claim your guarantee (especially if you want to use it as your primary phone). Otherwise use the unbrick advice from markatkins earlier in this thread (but you have to feel secure with android)
good luck
Click to expand...
Click to collapse
Thanks Mjfh
Looks like I have to pay a premium on the freight via courier to get it back to China. The local postal service won't take it because it contains a (non-removable) Lithium battery.. I'm not sure about unbricking it as it seems it is a very complicated process - and seeing that it seems completely dead -(not any signs of life, no lights, no screen) do you thnk it is just a matter of a firmware reset? If I attempt to unbrick it - I lose the warranty right?
So my best bet I think is to depart with several tens of dollars for the freight and demand a replacement that will not bug out inside 2 weeks.
issue, try this
Jeff_T said:
Thanks Mjfh
Looks like I have to pay a premium on the freight via courier to get it back to China. The local postal service won't take it because it contains a (non-removable) Lithium battery.. I'm not sure about unbricking it as it seems it is a very complicated process - and seeing that it seems completely dead -(not any signs of life, no lights, no screen) do you thnk it is just a matter of a firmware reset? If I attempt to unbrick it - I lose the warranty right?
So my best bet I think is to depart with several tens of dollars for the freight and demand a replacement that will not bug out inside 2 weeks.
Click to expand...
Click to collapse
Look I had this issue regarding dead and not turning on... sometimes charging it for several hours and it would just come back to life, i believe it is a battery issue, reading battery (stock rom) and when it may say 15% for example, the battery is actually empty and it dies, the charging should make display turn on but does not for a long, long time.
if this does not work, hold down vol up or vol down plus power button, this can breath life into it (sometimes both up and down plus power) remember press all at exactly same time and hold for 10 seconds at least for reset (unless it comes back before 10 seconds)
been a while since i held my phone so check top of page for my instructions as it is in there
best of luck
markatkins
toomax.mx said:
Markatkins said:
Thanks for this, i now have access to the ROM, and if you can understand the instructions its possible to install the ROM again.
I attached a Word Document with information and questions about this X2 device, which is too hard to recover to update ... and an buch of missfunction. ( camera error : can't connect to the camera; 4G LTE does not function, only 3g; battery life normal as 2000 mAh; )
I expect your answer or comments very soon.
Best Regards.
tomas abrego garcia.
Click to expand...
Click to collapse
Nice work
you need to install all ports to make this work well... i am going off memory from over 2 months ago but if you can revisit my instructions and check how many ports i have to setup, it should get you a green light, i could see an error in a photo at bottom of word... something about ports, this may confirm my theory.
I will answer all the questions soon, once I have a phone in my hand (give me 2 weeks, and tinker while you wait )
hope this helps
Click to expand...
Click to collapse
Jeff_T said:
Thanks Mjfh
Looks like I have to pay a premium on the freight via courier to get it back to China. The local postal service won't take it because it contains a (non-removable) Lithium battery.. I'm not sure about unbricking it as it seems it is a very complicated process - and seeing that it seems completely dead -(not any signs of life, no lights, no screen) do you thnk it is just a matter of a firmware reset? If I attempt to unbrick it - I lose the warranty right?
So my best bet I think is to depart with several tens of dollars for the freight and demand a replacement that will not bug out inside 2 weeks.
Click to expand...
Click to collapse
just do what I did, post and tell them battery removed (tick the plane and ship boxes - should be on form for international post)
I looked up why battery is now banned, its stupid... thanks to the more dangerous li-pol battery types, starting fires in planes and stuff like exploding, the air transport authority decided to ban the li-pol (explodes and loads of fires every year) and in that they included the more reliable (not dangerous and very few accidents worldwide) li-ion which is what is in your phone... so batterys in general.
play dum, say no battery in phone and tick that box for sea/ship shipping
remember this is a 80 degree c proof phone, pressure proof and should be able to contain the fire, but a fire wont start...
otherwise pay AUD100 (convert to GBP or USD for a similar horrific amount no one should pay)
if your phone does explode or cause a fire in transit... i am not accountable, you do this at your own risk and risk of being fined etc blah blah... read about % of fires from li-pol and li-ion, you will see the chance is slim, slimmer once sealed in a phone that will give it a heat proof case to try and get past plus minimal air to fuel a fire... good luck fixing or sending
I found an app called KINGROOT and worked like a charm. It rooted my No.1 Xmen X2 with just one click, it even fix the Kitkat SD write problem in the process.
I had to erase the SD card after the rooting process for the fix to work and after the root, had to reboot the phone 2 times. Everything is working super fine so far. Hope this work for everyone!
Kingroot V4.5
http://forum.xda-developers.com/devdb/project/dl/?id=14250
Which exact rom version do you use ?
Is GPS working?
BR
Trying new root version...
denispunk said:
I found an app called KINGROOT and worked like a charm. It rooted my No.1 Xmen X2 with just one click, it even fix the Kitkat SD write problem in the process.
I had to erase the SD card after the rooting process for the fix to work and after the root, had to reboot the phone 2 times. Everything is working super fine so far. Hope this work for everyone!
Kingroot V4.5
http://forum.xda-developers.com/devdb/project/dl/?id=14250
Click to expand...
Click to collapse
I have just tested the newest software from kingroot as advised released by denispunk, I am amazed as I only downloaded the previous version a few weeks ago, no luck with the old version of "new_kingroot...", however I may be in a slightly different position to others as my phone seams to have an issue locked in (despite flashing and wipe of partition) where it has a partial root access of some form, so trying this now......................
Tried 2 times and failed, I want to ask all reading this to please download (rename from .zip to .apk) and attempt root on their x2 or x6800. if you fail click on the huge submit button as I have been doing this for some time in the hope that they would see demand and accelerate the process of making a workaround.
For all looking (that search for root x6800 online ) this should work the same % for anyone with the no.1 x6800 and the x2 [I have the X2 and got money back from insurance claim, so I also have x6800 on the way ] because the x2 and x6800 are the same rom from what I have researched, the only difference is the micro sd capacity, the 4g bands supported and a huge 6000mha battery in the x6800. most components otherwise are identical.
All reading please have a go...
if you are reading this you have an x2 or x6800 or know someone who does...
if your not very experienced or if you are experienced in ROM work, try point 1 and then try point 2 below, but please just do point 1 if nothing else
1) email No.1 and "beg" for a android 5.0/64bit kernel ROM for the x2 and x6800 to be released - I have done this and want to encourage you all to help me force the company to meet consumer demand, by setting a consumer demand. This 64bit update would increase the phones potential as it has a 64bit CPU, it currently runs 32 bit software which is slowing it down.
once done read point 2
2) I wanted to see if some experienced persons could visit the en.no1phone.cc site and download the M2 firmware (not a spelling mistake) as this device and the x2 use the same unusual ROM's which look similar in layout. my hope is we can bind parts from the 2 ROM's together to get a 64bit android version onto the x2/x6800... please understand I do know this will need work and will most likely not work ever but with the unique rom types I figure there is no harm in trying and someone might have the ability to open them and do some magic.
now the phones are physically different but No.1 use the same basic layout in their ROM's and the most basic possible stock android with nothing but background pictures added.
my hope, from what I can see in the files of the two ROM's, is that we can merge/build the OS, kernal and some of the information from the M2 ROM into the x2 ROM (I have supplied the x2 rom in the top of this post on page 1) and hope that its basic enough to maybe work with some tweaking, I know the CPU is different and that I am explaining this simply like a drag and drop, but if it does work we can get 64 bit software for our CPU's
if all else fails we can hope No.1 release what we ask for, and you can flash the original x2 rom back onto the device until they release it or someone on here gets through the ROMS and makes us our own.
denispunk said:
I found an app called KINGROOT and worked like a charm. It rooted my No.1 Xmen X2 with just one click, it even fix the Kitkat SD write problem in the process.
I had to erase the SD card after the rooting process for the fix to work and after the root, had to reboot the phone 2 times. Everything is working super fine so far. Hope this work for everyone!
Kingroot V4.5
http://forum.xda-developers.com/devdb/project/dl/?id=14250
Click to expand...
Click to collapse
Root worked
I finally sourced a slightly newer .apk and root worked. Kingroot will root no.1 x2 or no.1 x6800. So far used it to access battery stats with Xposed and installed one power guard to lower CPU speed to gain more battery. The device is very fluid still on 533mhz in power save CPU mode with I/O scheduler in "row"
I advise anyone looking for this phone rooted to visit the official www.kingroot.net site
Great news everybody, since my post asking for us to all send kingroot requests to support our device for root access, the number of requests jumped almost 30 points and they listened! Kingroot responded and now...
Kingroot.net will root the no.1 x2!
If you just landed here looking for the software to root the X2 or X6800 from No.1, please help us make this phone better, this forum helped get kingroot.net to enable root for the X2 so help us and say thank you by sending an email to no.1 regarding getting lollipop on the X2 and X6800.
You just need to...
Email: [email protected]
Skype: quecc1989
Or MSN: [email protected]
Ask for lollipop ROM to be made for the x2 and the x6800 and say it will make the phone faster and have a better battery life. Copy that if you like
Update on this: not only will the software give the phone a bit of a boost in power, it should improve battery life and I completely failed to mention before that we will have faster app boot times as well because we will get access to ART instead of Dalvik (Currently I cannot find a way to run ART in KitKat without factory resetting to get out of the nice boot loop it sticks me in).
For those unaware of what I am going on about, Dalvik is the runtime android is moving away from because it has to decompress each installed app before it runs, ART (android run time) installs app's already decompressed (more space used on install but fast launch). I find the x2's 8GB is plenty of internal space for applications so let's harass no.1 sales email and Facebook/twitter/google+until we get lollipop.
Official no.1 site is: http://en.001phone.cn
They use a picture for contact info but feel free to click on my links above for msn, Skype etc
Sorry if this was a ramble, but power of word is going to be easier than us taking and editing ROM's or making ROM's to get lollipop... If we harras them endlessly they will fold and build it for the phones and all it takes is one email each... Maybe a followup each too
toomax.mx said:
I expect very soon someone help us to ROOT it !!!!
Best Regards.
Click to expand...
Click to collapse
I hope the same for the No.1 X6800
forum.xda-developers.com/general/help/root-1-x6800-rugged-ip-68-phablet-china-t3254950
Not much people know the No.1 smartphones (the rugged ones are awesome for the price).
Update: I rooted the No.1 X6800 with 'NewKingRoot v4.62' app and after that buy the Super-SuMe-pro' app to keep it 'trustfully rooted and with SuperSU'.
When device is off, and I press power button and volume up button. Then I get a bootloader that can boot from MicroSD card.
So place the compatible Rom on MicroSD and re flash it.
This works for me with original x6800 rom on my x6800 phablet.