Hey guys.
Got a chance to buy an hp for £180. Would you say it was better than the vega? At the moment running vega comb I must admit I'm loving my vega! What are your thought please?
Much better mate....
The hardware of the tp is far superior to that of the Vega. Once Android is ported I'm sure we will have a honeycomb port in some fashion, and also ICS
Sent from my Samsung Galactic Superstar S II
I've got both and have handed the Vega to my wife now I am using the Touchpad pretty much full time.
i think vega's screen is pretty poor
Ok guys that's good.
What's the software like then? Is it as good as vegacomb?
Advent Vega
+1 Tegra SOC
+1 MicroSD Slot
+1 3G Sim
-1 512 ROM
-1 512 RAM
Hasn't the Vega got some limitation with wifi switching off when the screen is off?
Sent from my Samsung Galactic Superstar S II
Not with new vegacomb, still works.
Ok cool, will get the hp and sell the vega.
Prob silly q, assume you can get the android Market on it?
foxguard said:
Not with new vegacomb, still works.
Ok cool, will get the hp and sell the vega.
Prob silly q, assume you can get the android Market on it?
Click to expand...
Click to collapse
You can't get android anything on it just yet.
I have both a G-tablet & a Touchpad. While I expect the Touchpad to be my favorite device once a fully functional Android rom exists, the G-tablet is my 'Go-To' device today.
I would still suggest getting the HP, but don't sell your Vega just yet.
Zaphod-Beeblebrox said:
You can't get android anything on it just yet.
I have both a G-tablet & a Touchpad. While I expect the Touchpad to be my favorite device once a fully functional Android rom exists, the G-tablet is my 'Go-To' device today.
I would still suggest getting the HP, but don't sell your Vega just yet.
Click to expand...
Click to collapse
Thank you mate,
How close are they at making a fully woking android rom for it?
DaRkMyk said:
Advent Vega
+1 Tegra SOC
+1 MicroSD Slot
+1 3G Sim
-1 512 ROM
-1 512 RAM
Click to expand...
Click to collapse
I had a Vega and it didn't have a 3G slot, but by far and away the biggest -1 is the screen, it was terrible.
foxguard said:
Thank you mate,
How close are they at making a fully woking android rom for it?
Click to expand...
Click to collapse
I think sooner rather than later. There is a very crippled pre-alpha build available that shows that it at least runs/boot and has multi-touch support.
the CM7 team has made some more advancements and has mostly functioning WiFi. you can check @dalingrin twitter feed for updates.
Also vega has hdmi output.... No tv out on the hp touchpad..... but that screen is a good +10 on the touchpad compared to the vega....
DaRkMyk said:
Advent Vega
+1 Tegra SOC
+1 MicroSD Slot
+1 3G Sim
-1 512 ROM
-1 512 RAM
Click to expand...
Click to collapse
+1 Tegra SOC? I think the snapdragon processor on the touchpad is on par if not better than the tegra 2
---------- Post added at 06:21 PM ---------- Previous post was at 06:10 PM ----------
foxguard said:
Thank you mate,
How close are they at making a fully woking android rom for it?
Click to expand...
Click to collapse
cyanogenmod team made great progress with android being able to boot on touchpad as well as 10 pts multitouch and according to updates, made good progress on activating wifi on it but they also say there's still a lot to do... my advice too is to keep your vega if you really want android. I haven't received my touchpad yet.. but read webos is pretty neat and good but lacks apps
Related
Any possibility that we might see NotionInk's cool Eden UI on the Archos? I know the NotionInk Adam has Tegra, but I don't know if it's required for Eden...
Check out the NotionInk web site under the Software section if you don't know what I am talking about...
Moved to general as not android development
Probably not a good idea to try. Eden seems to be using nvidia's chip heavily. I wouldn't want to try that on our Archos'. Besisdes, let's see what honeycomb has for us as far as UI is concerned.
HoneyComb has many things to show us, a pre-release of the SDK is out and it's GREAT!
VIEWSONIC GTAB WITH ADAM OS....
CHECK THIS OUT.
http://forum.xda-developers.com/showthread.php?t=928152
Viewsonic Gtab is on the rocks now!..
ADAM Os is running only in Nvidia dual core...not possible in Archos 101. Sorry guys...
firewater2003 said:
VIEWSONIC GTAB WITH ADAM OS....
CHECK THIS OUT.
http://forum.xda-developers.com/showthread.php?t=928152
Viewsonic Gtab is on the rocks now!..
ADAM Os is running only in Nvidia dual core...not possible in Archos 101. Sorry guys...
Click to expand...
Click to collapse
i thought there are plans for a galaxy tab port.... will search for it
gbohm said:
i thought there are plans for a galaxy tab port.... will search for it
Click to expand...
Click to collapse
I dont thinks so...
Since Galaxy Tab has only single core processor
But maybe, dont lose hope...
firewater2003 said:
I dont thinks so...
Since Galaxy Tab has only single core processor
But maybe, dont lose hope...
Click to expand...
Click to collapse
isn't that dual core thing more or less guesswork? e
There are rumours that android 2.4 will be launched April this year and had better support for tablets, than previous version. Any one could confirm this?
It will be good news if someone could build a 2.4 android firmware.
Regards,
Bastospn
Best to concentrate on 3.0 since it's built for tablets. 2.4 only adds some features for tablets and dual core support iirc.
bastospn said:
There are rumours that android 2.4 will be launched April this year and had better support for tablets, than previous version. Any one could confirm this?
It will be good news if someone could build a 2.4 android firmware.
Regards,
Bastospn
Click to expand...
Click to collapse
2.4 will be a platform for smartfones with dual cores, not really tablets. it will include some features of 3.0, but will be mainly a mix of gingerbread and honeycomb. it is done to provide the "honeycomb" experience on dual cores cpu smartphones, since gingerbread has no support for dualcores, and honeycomb is made for tablets only, mostly with dualcore support. something in between is 2.4.
u got a folio 100? , then u got a tablet, so aim for the 3.0
If 3.0 will only support 1280x800 screens on we will be able to get it to work on Folio?
bastospn said:
If 3.0 will only support 1280x800 screens on we will be able to get it to work on Folio?
Click to expand...
Click to collapse
It would be irrational to bind a platform onto one resolution. So yes, It will work on other resolutions as well. I can't see that happening.
bastospn said:
If 3.0 will only support 1280x800 screens on we will be able to get it to work on Folio?
Click to expand...
Click to collapse
Well, Honeycomb had been 'successfully' ported over onto the Nook Color which runs 1024x600 resolution (doing a search on Youtube with 'nook color honeycomb' will give you some results). So maybe there is hope yet for the Folio!
I also think it's better to wait for the 3.0 than the 2.4
I 'm not so sure that honeycomb is the way to go... but sure it's pretty.
Was this module purchased by XDA member ?
http://cgi.ebay.com/GPS-ViewSonic-G...90531526629?pt=US_Tablets&hash=item43a50747e5
If so, any chance to get a report how it's working and perhaps some pictures ?
Thanks
I saw that too and was mighty interested. No pics of the hardware being sent or it installed in the gtablet so I'm just a little curious. I emailed the seller to ask if he's got more for sale or any pics...
I posted on this before. I think its a scam. I think they are selling a gps reciever that is not a internal add on. I got a gps unit for $20.
Scam with positive feedback from the buyer? (and it wasn't re-listed)
I don't think so.
does an external gps exist for this?
gpzjack said:
I posted on this before. I think its a scam. I think they are selling a gps reciever that is not a internal add on. I got a gps unit for $20.
Click to expand...
Click to collapse
What are you using for GPS?
Looks like total BS to me.
projectpaki said:
does an external gps exist for this?
Click to expand...
Click to collapse
My Bluetooth GPS works fine with the addition of BlueGPS from sourceforge.
stox said:
My Bluetooth GPS works fine with the addition of BlueGPS from sourceforge.
Click to expand...
Click to collapse
Same here on a ztab
Sent from the awesome ZTab
Yep, I use blue tethered to my incredible which works great. Not sure if i'd want to crack open my gtab and monkey around with it to solder on a component.
I think you are missing the point folks,
internal would be way more convenient.
I wouldn't hesitate to solder it but still can't find the right module.
GPS
lifeisfun said:
Was this module purchased by XDA member ?
If so, any chance to get a report how it's working and perhaps some pictures ?
Thanks
Click to expand...
Click to collapse
I bought the Gps module. Yes it fits the board and Yes it's installed.
I haven't finished installing it because you have to put power to the chip and install the Ant. Insturction are really not very good. I will get it finished but it's on the back burner now as I'm Modding my Viewpad 10 dual boot.
2GB ram 64GB hard drive with built in GPS. Windows 7 with Android 2.2
This Tablet Rocks Tuned up.
6.055chevy said:
I bought the Gps module. Yes it fits the board and Yes it's installed.
I haven't finished installing it because you have to put power to the chip and install the Ant. Insturction are really not very good. I will get it finished but it's on the back burner now as I'm Modding my Viewpad 10 dual boot.
2GB ram 64GB hard drive with built in GPS. Windows 7 with Android 2.2
This Tablet Rocks Tuned up.
Click to expand...
Click to collapse
Any chance you can share what module it is and/or the instructions?
Yeah, that would be great
I really believe an external GPS would be much better, you can reorient to get the best signal. I have BT Delorme but can't seem to get it to pair even with BlueGPS.
6.055chevy said:
2GB ram 64GB hard drive with built in GPS. Windows 7 with Android 2.2
This Tablet Rocks Tuned up.
Click to expand...
Click to collapse
When did they release Android 2.x that works on x86?! I would go out and get a Dell Inspiron Mini Duo if I could run Froyo or Honeycomb on it as a dual boot option...
I've posted in another thread about my external keychain GPS receiver from Freedom. It works fine if I want to use the GTab for navigation in the car. It may be similar to the receiver sold by this Ebay seller.
Here's what I have:
http://www.freedominput.com/technical-support/technical-support/mini-gps
It'll be cool if there were cases made with gps built in for tablets.
KnightCrusader said:
When did they release Android 2.x that works on x86?! I would go out and get a Dell Inspiron Mini Duo if I could run Froyo or Honeycomb on it as a dual boot option...
Click to expand...
Click to collapse
2.2 x86 came out a few weeks ago finally. Still buggy I'm sure and probably not all that fast.
So how difficukt is the soldering work for tis mod?
Hey!
I was just wondering, is this the tablet you are developing for here?
http://www.hannspree.com/EU/EN/Prod...l.aspx?sort=2&page=1&pattrs=&attrs=&viewAll=0
I am thinking about buying it, but I am wondering if it's a good choice?
Is there any firmware updates to 2.3 or 3.0, so I can take proper use of the Tegra II CPU it has?
And can I install a proper Android interface, so I don't have to use the weird one Hannspree provide?
Thank you
As far as I can see these two tablets are not quite the same, but mostly.
Viewsonic has a full-sized USB port and a webcam (skype video chat?), but does it also have an HDMI output so I can play movies on my TV?
And does anybody know if I can buy a Viewsonic G tablet in Europe, or is Hannspad better?
Sebz4n said:
Hey!
I was just wondering, is this the tablet you are developing for here?
http://www.hannspree.com/EU/EN/Prod...l.aspx?sort=2&page=1&pattrs=&attrs=&viewAll=0
I am thinking about buying it, but I am wondering if it's a good choice?
Click to expand...
Click to collapse
For the Price of 169,- it's a very good choice!
Sebz4n said:
Is there any firmware updates to 2.3 or 3.0, so I can take proper use of the Tegra II CPU it has?
Click to expand...
Click to collapse
There is a custom [ROM] CyanogenMod 7.1 [alpha232 build] for it.
And two Honeycomb ROMs FlashBack72 and GtaComb33 with kernel adam 4 integrated
And a modded Stock [ROM] HannsTitan v0.3.1 [Update Aug 25]
In all ROMs there are no Hardware acceleration.
But beside that it works like a charm
Sebz4n said:
And can I install a proper Android interface, so I don't have to use the weird one Hannspree provide?
Click to expand...
Click to collapse
It's possible.
Sebz4n said:
As far as I can see these two tablets are not quite the same, but mostly.
Click to expand...
Click to collapse
You are right.
Sebz4n said:
Viewsonic has a full-sized USB port and a webcam (skype video chat?), but does it also have an HDMI output so I can play movies on my TV?
Click to expand...
Click to collapse
Yes you can. Under FB 7.2 it works flawless. All you need ist a Mini-HDMI-Cable.
I wanted the Viewsonic tablet, but it's only being sold in USA it seems
Ubuntu Just released this video showing off their new OS for tablets. In the video, they are using what looks like a Nexus 10. But what do you guys think? Would you use this if we were able to put it on our TouchPad? Don't know if that will be possible. But just asking to see what you guys think of it.
https://www.youtube.com/watch?v=h384z7Ph0gU&hd=1
EDIT: Actually, I dont think our TouchPad meets the minimum requirements. But I guess we will see.
Good article on Engadget as well... looks promising
Just read this too, on omgubuntu.com really hoping it can be ported!
Sent from my cm_tenderloin using Tapatalk 2
If this is running on top of the latest version of Ubuntu for ARM and seeing that there are working versions of Ubuntu out there for the Touchpad, then it seems possible we would get this assuming its source code is released and someone is willing to port it. Their requirements are a bit steep (2GB RAM and Cortex A15 processor), but seeing that they are providing a test version for the Nexus 7 which is 1GB of RAM and quad core A9, then the Touchpad may be fine (not sure if the Touchpad is A8 or A9 or if that would even matter)
spunker88 said:
If this is running on top of the latest version of Ubuntu for ARM and seeing that there are working versions of Ubuntu out there for the Touchpad, then it seems possible we would get this assuming its source code is released and someone is willing to port it. Their requirements are a bit steep (2GB RAM and Cortex A15 processor), but seeing that they are providing a test version for the Nexus 7 which is 1GB of RAM and quad core A9, then the Touchpad may be fine (not sure if the Touchpad is A8 or A9 or if that would even matter)
Click to expand...
Click to collapse
I dont believe its running on the top of anything. Its its own OS. I'm hoping it could be ported to the TouchPad. I'd like to try it out.
Apps...
1. If my app isn't on Ubunto, well...
2. Webos was there...
3. But i think, windows 7 will be my last tie to Microsoft, if my app is on Ubunto.
spunker88 said:
If this is running on top of the latest version of Ubuntu for ARM and seeing that there are working versions of Ubuntu out there for the Touchpad, then it seems possible we would get this assuming its source code is released and someone is willing to port it. Their requirements are a bit steep (2GB RAM and Cortex A15 processor), but seeing that they are providing a test version for the Nexus 7 which is 1GB of RAM and quad core A9, then the Touchpad may be fine (not sure if the Touchpad is A8 or A9 or if that would even matter)
Click to expand...
Click to collapse
Actually the Touchpad has an A7. Here is a link comparing versions: http://www.bdti.com/InsideDSP/2011/11/17/ARM
That said, I like the new layout and just hope the Touchpad can run it smoothly. There is already a functional alpha of Ubuntu 13.04 for the touchpad (in the Other Development forum), so I can't imagine it will not happen.
Sent from my cm_tenderloin using Xparent Green Tapatalk 2
This is something I am really hoping can happen.
Is this what you're looking for? http://forum.xda-developers.com/showthread.php?t=2146089
kangi26 said:
Is this what you're looking for? http://forum.xda-developers.com/showthread.php?t=2146089
Click to expand...
Click to collapse
That is normal Ubuntu without the tablet interface but that alpha works really nice though. I'm an Ubuntu desktop user since 2008.
i would so love this. I want to check out this new mobile ubuntu so bad and would rather flash my touchpad than my galaxy nexus.
Here's hoping someone picks it up and makes it happen.
This is a good video of the OS running really well on the Nexus 10.
http://www.youtube.com/watch?feature=player_embedded&v=XkyYKqKUYXA
Straight from Ubuntu's website, details are coming tomorrow about porting Ubuntu Mobile to other devices:
https://wiki.ubuntu.com/Touch/Porting
Also of significance is a bunch of Cyanogenmod hardware code showing up on: http://phablet.ubuntu.com/gitweb
I wonder if this means it will be easier to compile for devices supported by Cyanogenmod, which would make a Touchpad port much easier.
Awesome can't wit to try on nexus 7:good:
Is this the real deal http://thedroidguy.com/2013/02/ubun...-code-for-nexus-7-and-nexus-10-now-available/
blucmal said:
Awesome can't wit to try on nexus 7:good:
Is this the real deal http://thedroidguy.com/2013/02/ubun...-code-for-nexus-7-and-nexus-10-now-available/
Click to expand...
Click to collapse
Its the real deal. You can get this on any Nexus device right now. Just be aware, its not fully functional. Its just a preview to show off what it will feel and look like when it is done. And if your a developer, it gives you something to test your apps out on. Thats it.
Hopefully, once the OS really matures and becomes functional, someone will build it for us, seeing as its just as easy as building CM 10.1
http://www.xda-developers.com/android/porting-ubuntu-touch-is-as-simple-as-building-cm/
Sent from Mr Z's HP Touchpad
The only problem with that is that we don't have CM10.1
CM10.1 is completely do-able for the TP. Many other devices using the same chip set are now into nightly builds. Its just a matter of setting it up for the TP. CN already as an alpha build in 4.2.1 for testing.
Sent from my SAMSUNG-SGH-T989 using xda premium
10.1
I can not wait for 10.1 will be nice to be able to port Ubuntu to the touchpad.
Oh I'm excited and love a beautiful interface!
Pretty solid so far and you never know...the dHacker29 and Hashcode have already begun work on Ubuntu for the Droid Bionic and to me this means anything is possible.
All I need now is a way to running something like Safestrap and boot multiple builds on my Touchpad with 32gb of storage. I could see running webOS, JB, and Ubuntu for Tablets on my Touchpad. Sorli...