I have ubuntu 9.0.4 running on my webtop. But now i have problem on installing DrRacket. I tried to use "sudo ./*.sh", but I was told "permission denied". Then i used "bash *.sh", after chose the directories, it returned "Error: bad crc checksum"
any help? Thanks
Related
I have spent the last to days trying to solve my error setting up sdk on linux mint12. I keep getting this error.
[Qoute]
scott-Presario-CQ62-Notebook-PC scott # apt-get -f installReading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libc-bin libc6
Suggested packages:
glibc-doc
The following NEW packages will be installed:
libc-bin
The following packages will be upgraded:
libc6
1 upgraded, 1 newly installed, 0 to remove and 376 not upgraded.
3 not fully installed or removed.
Need to get 0 B/5,143 kB of archives.
After this operation, 3,432 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16.
Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17.
Preconfiguring packages ...
dpkg: warning: 'ldconfig' not found in PATH or not executable.
dpkg: error: 1 expected program not found in PATH or not executable.
Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
E: Sub-process /usr/bin/dpkg returned an error code (2)
[Qoute]
I have tried every fix I have found online and all return this exact error. I tried changing the permisons on etc/sudoers to make sure they were right. I also added a these paths.
export PATH={PATH}:/usr/local/sbin:/usr/sbin:/sbin
export PATH={PATH}:/usr/local/bin:/usr/bin:/bin
I have even placed a permission file inside sudoers.d to try to add the path but I just ended up ruining my root access and have to do a complicated fix through my bootloader.but just cant seem to get it to work I am newer to linux and know basic commands but have no idea why I keep getting the same error or how to fix it any help would be deeply appreciated.
Are you running 64 bit? You need to dl the 32 bit lib's
Now it may be cheating, but try Tommytommatoe's android utility it sets up SDK for you and adds everything to your path... It's my go to for stubborn SDK
Sent from my PC36100 using xda premium
Yea it 64bit and I added the 32 bit libs for java but it gives the error when I try that to. I guess I will try that tanks man
Sent from my ADR6425LVW using XDA
Are you using an installer script or something like that?
RoberGalarga said:
Are you using an installer script or something like that?
Click to expand...
Click to collapse
No just piece by piece did java then unpacked SDK in my root dir and update it installed the API and all that then when I try to use adb it says their is no command and all the fixes make the error I described at first.
Sent from my ADR6425LVW using XDA
Ok... you don't need any fixes... you can simply move to platform-tools directory (using command cd /path/to/platform-tools) to can run ./adb command (note: ./adb, not adb).
RoberGalarga said:
Ok... you don't need any fixes... you can simply move to platform-tools directory (using command cd /path/to/platform-tools) to can run ./adb command (note: ./adb, not adb).
Click to expand...
Click to collapse
Really now I feel dumb lol. Guess I'm to used to windows been developing on it for a while. Thanks a lot.
Sent from my ADR6425LVW using XDA
Well thanks for all your help guys I guess I had a bad download of linux so I did a new clean install and setup SDK and apktool and dsixdas kitchen. Now everything works fine. No sudo errors or nothing the good news is with all the trying to fix what was wrong I got used to root being / instead of c:/ so that's a bonus
Sent from my ADR6425LVW using XDA
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
[email protected]:/$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
obconf leafpad lxde-common linux-libc-dev lxrandr pcmanfm lxde-core lxappearance gpicview libc6-dev lxpanel
lxde-settings-daemon xarchiver
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded.
3 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up mysql-server-5.0 (5.1.30really5.0.75-0ubuntu10.5) ...
* Stopping MySQL database server mysqld [ OK ]
mkdir: cannot create directory `/var/log/mysql': No such file or directory
dpkg: error processing mysql-server-5.0 (--configure):
subprocess post-installation script returned error exit status 1
Setting up libapache2-mod-php5 (5.2.6.dfsg.1-3ubuntu4.6) ...
readlink: invalid option -- 'q'
BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) multi-call binary
Usage: readlink [-f] FILE
Display the value of a symlink
Options:
-f Canonicalize by following all symlinks
ucf: Unable to determine The new file
dpkg: error processing libapache2-mod-php5 (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of php5-mysql:
php5-mysql depends on phpapi-20060613+lfs; however:
Package phpapi-20060613+lfs is not installed.
Package libapache2-mod-php5 which provides phpapi-20060613+lfs is not configured yet.
dpkg: error processing php5-mysql (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
mysql-server-5.0
libapache2-mod-php5
php5-mysql
E: Sub-process /usr/bin/dpkg returned an error code (1)
Click to expand...
Click to collapse
vctshim said:
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
Click to expand...
Click to collapse
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
douglasroos said:
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
Click to expand...
Click to collapse
I found out it is impossible. Many repos are dead and crucially Ubuntu in this is outdated (without LTS)
I sold the Atrix and bought ARM-based Open PCs (e.g. Raspberry Pi, Cubieboard, Beaglebone Black, Udoo, etc..)
If you want low-power web server, this might be the way to go
(Ubuntu Phone might work but I'm not sure YET)
Hello all,
I'm trying to run a script on my rooted Galaxy W GT-I8150 but - here's the rub - the script use to run perfectly but now returns a syntax error.
The script runs on my Mac, and I know it's syntactically flawless. But if I try to run it from ADB shell, it returns a syntax error. The syntax error is the same if I try to run it from the terminal emulator on the phone. It stopped working after I used CWM to restore a backup of my stock rom.
However, my stock rom is still rooted, with SU and busybox installed. I am wondering if I should wipe my cache or something?
The error is:
sdcard/external_sd/pull_script.sh: 4: Syntax error: word unexpected (expecting ")")
The first four lines of the script is this:
Code:
NUM=0;
NUM2=1;
str=( "ccid_ctrl" "ccid_bulk" "smem_log" "ttySMD0" "ttyCSD0" "ttyHS0" "poop.rtf" ) ;
str2=( "mmcblk1" "mmcblk0p" ) ;
Anyone have any ideas? Thanks,
Foxy
Hello friends!
I am using Termux in order to run ruby.
I installed ruby successfully with "apt" command, and it functions fine.
Current ruby version:
Code:
$ ruby -v
ruby 2.3.3p222 (2016-11-21 revision 56859) [arm-linux-androideabi]
The problem is, I can't really install gems. I tried to install bettercap for the experiment, but it failed. This is what I get:
Code:
$ gem install bettercap
Fetching: colorize-0.8.1.gem (100%)
Successfully installed colorize-0.8.1
Fetching: network_interface-0.0.1.gem (100%)
Building native extensions. This could take a while...
ERROR: Error installing bettercap:
ERROR: Failed to build gem native extension.
current directory: /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1/ext/network_interface_ext
/data/data/com.termux/files/usr/bin/ruby -r ./siteconf20161129-14856-1cclchu.rb extconf.rb
mkmf.rb can't find header files for ruby at /data/data/com.termux/files/usr/lib/ruby/include/ruby.h
extconf failed, exit code 1
Gem files will remain installed in /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1 for inspection.
Results logged to /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/extensions/arm-linux/2.3.0/network_interface-0.0.1/gem_make.out
I found some instructions if I ran "gem help install" but I couldn't really understand what to do in order to fix that.
Can anyone help me to solve this? BTW I have a rooted device so I can use "su" and "sudo" and all that stuff...
Thanks for people who answer~
FurySh0ck said:
Code:
mkmf.rb can't find header files for ruby at /data/data/com.termux/files/usr/lib/ruby/include/ruby.h
Click to expand...
Click to collapse
You can install ruby.h with:
Code:
apt install ruby-dev
.
fornwall said:
You can install ruby.h with: .
Click to expand...
Click to collapse
I installed ruby-dev but it still won't work. It tells me it saved a log file which contains the explanation to the failure. I'll post the whole code, but please pay attention to the last part of it:
Code:
apt install bettercap
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bettercap
$ gem install bettercap
Building native extensions. This could take a while...
ERROR: Error installing bettercap:
ERROR: Failed to build gem native extension.
current directory: /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1/ext/network_interface_ext
/data/data/com.termux/files/usr/bin/ruby -r ./siteconf20161206-31345-1xerjr9.rb extconf.rb
[*] Running checks for netifaces code...
[*] Warning : this platform as not been tested
checking for getifaddrs()... *** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of necessary
libraries and/or headers. Check the mkmf.log file for more details. You may
need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/data/data/com.termux/files/usr/bin/$(RUBY_BASE_NAME)
/data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:456:in `try_do': The compiler failed to generate an executable file. (RuntimeError)
You have to install development tools first.
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:541:in `try_link0'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:556:in `try_link'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:765:in `try_func'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:1051:in `block in have_func'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:942:in `block in checking_for'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:350:in `block (2 levels) in postpone'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:320:in `open'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:350:in `block in postpone'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:320:in `open'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:346:in `postpone'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:941:in `checking_for'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:1050:in `have_func'
from extconf.rb:43:in `<main>'
To see why this extension failed to compile, please check the mkmf.log which can be found here:
/data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/extensions/arm-linux/2.3.0/network_interface-0.0.1/mkmf.log
extconf failed, exit code 1
Gem files will remain installed in /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1 for inspection.
Results logged to /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/extensions/arm-linux/2.3.0/network_interface-0.0.1/gem_make.out
Any solutions in mind?
BTW Thanks for your time, I appreciate anyone who tries to help.
I'm endeavouring to use libdrm to change gamma on my Chromebook. I find that when I call drmModeCrtcSetGamma, I get a "Permission denied" error, regardless of whether I run my program with sudo. See line 91 of my source code:
github.com/entrity/chromeos_gamma/blob/b5738b5c12575dbb4c66060502d1e3bd4381fe3e/drm.c#L91
So I insert a call to drmSetMaster(dat->fd) above drmModeCrtcSetGamma, and that results in an "Invalid argument" error. What is the correct approach, please? Documentation seems rather sparse, with the best I've seen being this:
wnwolf.com/display/2012/09/05/libdrm-samples/
(Sorry for the lack of hyperlinks. I don't have enough rep to post full URLs.)