Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
[email protected]:/$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
obconf leafpad lxde-common linux-libc-dev lxrandr pcmanfm lxde-core lxappearance gpicview libc6-dev lxpanel
lxde-settings-daemon xarchiver
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded.
3 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up mysql-server-5.0 (5.1.30really5.0.75-0ubuntu10.5) ...
* Stopping MySQL database server mysqld [ OK ]
mkdir: cannot create directory `/var/log/mysql': No such file or directory
dpkg: error processing mysql-server-5.0 (--configure):
subprocess post-installation script returned error exit status 1
Setting up libapache2-mod-php5 (5.2.6.dfsg.1-3ubuntu4.6) ...
readlink: invalid option -- 'q'
BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) multi-call binary
Usage: readlink [-f] FILE
Display the value of a symlink
Options:
-f Canonicalize by following all symlinks
ucf: Unable to determine The new file
dpkg: error processing libapache2-mod-php5 (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of php5-mysql:
php5-mysql depends on phpapi-20060613+lfs; however:
Package phpapi-20060613+lfs is not installed.
Package libapache2-mod-php5 which provides phpapi-20060613+lfs is not configured yet.
dpkg: error processing php5-mysql (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
mysql-server-5.0
libapache2-mod-php5
php5-mysql
E: Sub-process /usr/bin/dpkg returned an error code (1)
Click to expand...
Click to collapse
vctshim said:
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
Click to expand...
Click to collapse
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
douglasroos said:
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
Click to expand...
Click to collapse
I found out it is impossible. Many repos are dead and crucially Ubuntu in this is outdated (without LTS)
I sold the Atrix and bought ARM-based Open PCs (e.g. Raspberry Pi, Cubieboard, Beaglebone Black, Udoo, etc..)
If you want low-power web server, this might be the way to go
(Ubuntu Phone might work but I'm not sure YET)
Related
Optware was originally developed as a distribution mechanism for software for the Open Source Linux project for the Linksys NSLU2 (a small low cost network storage device). That consumer storage device ran on Linux, and the community opened it up, but they needed a lightweight distribution mechanism for their lightweight devices.
Since 2004 Optware has been adopted by a variety of Linux communities and device developers including the webOS community working on the Palm Pre and Pixi, and developers for devices as diverse as Asus WL-500g,WL-HDD, WL-500gx, WL-500gP routers, the Synology DS-101 and DS-101g+ NAS devices.
At its core, Optware is a package manager to allow you to easly install and uninstall cross-compiled linux applications on your device over the internet. At this time, optware supports the automatic download and installation of over 1500 programs. (See the list at the end of the wiki article.)
Why should I use Optware?
Like the original slug, android devices lack a distribution mechanism to install Linux/command line tools programs and utilities. Many in the Android community who want or need to do command line processing on their device use a chroot of some sort (Debian seems popular) to get their distribution and package management tools. With Optware, it becomes possible to simply run whatever utility or program you want on the native underlying Linux.
Additionally, Optware For Android installs openSSH making it possible to access your Nook from any PC with SSH capability, and sets up an unprivileged username/password login system for the device at the command line. All in all then, since it can be installed with a single script, since it's lightweight, and since it's designed for small and embedded devices, Optware is a perfect fit for the Android community.
Optware for Nook is the first Optware for Android release by the Novaports team and is their gift to the Android community members who have helped them so much with information on Android devices.
What does it do?
The Optware bootstrap installed the IPKG package manager. It installs the optware Busybox. It installs openSSH and makes the ssh demon persistent. It creates an unprivileged user with a username and password you choose.
See Installation instructions and details at the Optware for Android page at Nookdevs.com
For completeness of licensing compliance, the source code for all optware package can be found at the following locations:
1) build scripts at svn.nslu2-linux.org in the /svnroot/optware/ area
2) tarballs at sources.nslu2-linux.org in the /sources area (this is a *large* directory)
To contribute code to Optware, see www . nslu2-linux . org in the /wiki/Optware/AddAPackageToOptware area
-- Rod Whitby
-- Original NSLU2-Linux Project Lead and Optware Architect
This works beautifully! Thank you!
Gonna try this and see if i can get samba to work.. a SMB mount over wifi would be awsome...
Many thanks!
I don't suppose there's a quick and easy way to completely remove optware?... not looking forward to culling through scripts and manually un-doing it all.....
adduser: not found
When it gets to the part in the install script to add the username of the unprivileged user, I enter a name, then it says: adduser: not found.
If it helps, I am using Rooted Stock 1.1.
Anyone get Optware to install on CM7 (newer nightly)
I am running CM7 #103 and would love to have optware installed.
But I get Fail if I try to use the method from Nookdevs
Tonight when I have more time I will look at the errors and see if I can tell what is up.
It looked like partially due to missing dir's for one (/tmp)
madrascafe said:
Gonna try this and see if i can get samba to work.. a SMB mount over wifi would be awsome...
Click to expand...
Click to collapse
The market has your answer and it's free:
https://market.android.com/details?id=com.funkyfresh.samba&feature=search_result
Am I the only one that wants Optware on CM7?
It goes fine on a manualnootered 1.2.0 NC But I prefer CM7 (And use the nightlies)
I would love to get this going on my NC as well. Running CM7 N121 w/ 6/30/2011 OC kernel. Was able to manually work past the tmp directory problem you mentioned, but I can't seem to execute the ipkg binary or installed. I've verified it indeed exists in the path I'm trying to execute it from, it has +x perms for user/ group/ other, but it always gives the error below:
/data/opt/bin/ipkg: not found
I've tried messing with bin directory and ipkg binary ownership, but no dice. If anything it should at least find it even if permissions aren't correct.
Looks like the contents of the binary reference ELF libraries which sounds like an issue attempting to execute in an Android environment. Going to see if I can chroot an environment that will work for it.
Sent from my NookColor using Tapatalk
This is happening because it's looking for /lib/ld-linux.so.3, and not finding it. I worked around by
ln -s /data/opt/lib/ld-linux.so.3 /lib/ld-linux.so.3
I also had to make these links:
ln -s /data/opt /opt
ln -s /data/tmp /tmp
And then set this:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/lib
export PATH=$PATH:/opt/bin/:/opt/sbin
in my bash profile to get things to start working.
One problem is my symlinks seem to get erased every reboot. I worked around by re-creating them in my bash profile, but I wish I knew how to make them permanent. This may be a ROM specific thing - this was written for a rooted stock nook, and I'm on an Epic running SFR.
I do not have a ld-linux.so.3 file on my NC w/ CM7 125
I have many other errors that show up:
Downloading the latest ipkg-opt package from the Optware package feed:
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
wget: can't open 'ipkg-opt_0.99.163-10_arm.ipk': File exists
(NOTE the above file 'ipkg-opt_0.99.163-10_arm.ipk' does not exist
(on my NC - from a find / -name ipkg-opt_0.99.163-10_arm.ipk)
Updating the Optware package database:
ERROR: Failed to update the local Optware package database
Updating the Optware package database:
/data/optware-bootstrap-0.0.1.shar: ipkg-opt: not found
ERROR: Failed to update the local Optware package database
Any ideas?
The actual file it needs is /data/opt/lib/ld-linux.so.3 - you need to create a symlink in /lib in order to see it. But I think that file comes from the optware installer - if the installer is failing, you won't have it there either. It sounds like you may have bits of a previous install that failed, and it's preventing the install from running properly. Try looking at the log in /data/tmp for more info. After that, try rm -rf /data/tmp/* to clean up the old install and trying again.
Thank You for any pointers.
I deleted everything in /data/tmp first last attempt - like you suggested.
Same result
I have it down to only this error now when I run it (optware-bootstrap-0.0.1.shar):
Updating the Optware package database:
optware-bootstrap-0.0.1.shar: ipkg-opt: not found
ERROR: Failed to update the local Optware package database
ipkg-opt should be in /data/opt/bin. Check to see if it's there... if not, something went wrong in one of the previous steps - probably somewhere around "Downloading the latest ipkg-opt package from the Optware package feed". See if wget is actually downloading anything, where it's putting it, and what it's doing with it afterwards.
If it is there, try running it manually. If you see /data/opt/bin/ipkg or /data/opt/bin/ipkg-opt but it claims it's not there when you run it, it may be a library linking error. Mine was looking for /lib/ld-linux.so.3 but it was actually installed at /data/opt/lib/ld-linux.so.3. mount -o remount,rw followed by ln -s /data/opt/lib/ld-linux.so.3 /lib/ld-linux.so.3 fixed that. I also had to run
ln -s /data/opt /opt
ln -s /data/tmp /tmp
before things started working.
By the way:
ntfsprogs - NTFS filesystem libraries and utilities
Could that be of any use? At the moment, it's not possible to mount NTFS storage on the NC
i would love to know how you guys get to this point even. When i try to install the very fist line of the script is an error and then nothing at all happens .... something about not finding busybox or something of that nature.
So you guys are getting WAY farther than I've been able to.
Tkx Tonygoes.
It is there in /data/opt/bin but it reports /data/opt/bin/ipkg: not found
I cannot find a ld-linux.so.3 on my NC at all.
I did the other links et al fro your comments also
obsid:
Try post 12 above:
and I had some other suggestions from someone:
might try thses FIRST the script seems to do it but may not actually get it done.
mount -o remount,rw / /
mount -o remount,rw /dev/block/mmcblk0p5 /system
you should also if tried before do this: rm -rf /data/tmp/
then do the items in post #12 above
NOTE for me the ln -s to ld-linux.so.3 does not work as I do not have that file on my system
I have spent the last to days trying to solve my error setting up sdk on linux mint12. I keep getting this error.
[Qoute]
scott-Presario-CQ62-Notebook-PC scott # apt-get -f installReading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libc-bin libc6
Suggested packages:
glibc-doc
The following NEW packages will be installed:
libc-bin
The following packages will be upgraded:
libc6
1 upgraded, 1 newly installed, 0 to remove and 376 not upgraded.
3 not fully installed or removed.
Need to get 0 B/5,143 kB of archives.
After this operation, 3,432 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16.
Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17.
Preconfiguring packages ...
dpkg: warning: 'ldconfig' not found in PATH or not executable.
dpkg: error: 1 expected program not found in PATH or not executable.
Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
E: Sub-process /usr/bin/dpkg returned an error code (2)
[Qoute]
I have tried every fix I have found online and all return this exact error. I tried changing the permisons on etc/sudoers to make sure they were right. I also added a these paths.
export PATH={PATH}:/usr/local/sbin:/usr/sbin:/sbin
export PATH={PATH}:/usr/local/bin:/usr/bin:/bin
I have even placed a permission file inside sudoers.d to try to add the path but I just ended up ruining my root access and have to do a complicated fix through my bootloader.but just cant seem to get it to work I am newer to linux and know basic commands but have no idea why I keep getting the same error or how to fix it any help would be deeply appreciated.
Are you running 64 bit? You need to dl the 32 bit lib's
Now it may be cheating, but try Tommytommatoe's android utility it sets up SDK for you and adds everything to your path... It's my go to for stubborn SDK
Sent from my PC36100 using xda premium
Yea it 64bit and I added the 32 bit libs for java but it gives the error when I try that to. I guess I will try that tanks man
Sent from my ADR6425LVW using XDA
Are you using an installer script or something like that?
RoberGalarga said:
Are you using an installer script or something like that?
Click to expand...
Click to collapse
No just piece by piece did java then unpacked SDK in my root dir and update it installed the API and all that then when I try to use adb it says their is no command and all the fixes make the error I described at first.
Sent from my ADR6425LVW using XDA
Ok... you don't need any fixes... you can simply move to platform-tools directory (using command cd /path/to/platform-tools) to can run ./adb command (note: ./adb, not adb).
RoberGalarga said:
Ok... you don't need any fixes... you can simply move to platform-tools directory (using command cd /path/to/platform-tools) to can run ./adb command (note: ./adb, not adb).
Click to expand...
Click to collapse
Really now I feel dumb lol. Guess I'm to used to windows been developing on it for a while. Thanks a lot.
Sent from my ADR6425LVW using XDA
Well thanks for all your help guys I guess I had a bad download of linux so I did a new clean install and setup SDK and apktool and dsixdas kitchen. Now everything works fine. No sudo errors or nothing the good news is with all the trying to fix what was wrong I got used to root being / instead of c:/ so that's a bonus
Sent from my ADR6425LVW using XDA
Is there a way to root the new 45.4.13 OTA that rolled out? I have tried all the root methods listed on: http://forum.xda-developers.com/showpost.php?p=20331601&postcount=5
Without any luck!
I want to add that I was rooted before applying the OTA.
stevetrooper said:
Is there a way to root the new 45.4.13 OTA that rolled out? I have tried all the root methods listed on: http://forum.xda-developers.com/showpost.php?p=20331601&postcount=5
Without any luck!
Click to expand...
Click to collapse
Wait, what? Even photon-torpedo didn't work?
any updated status with this yet?
I'm curious too...
Please keep us apprised and a system dump would be helpful from someone who has the update.
Sent from my MB855 using xda app-developers app
Shad0wguy said:
Wait, what? Even photon-torpedo didn't work?
Click to expand...
Click to collapse
Nope, tried it multiple times.
Torpedo worked for me this evening.
Sent from my MB855 using Tapatalk 2
Torpedo worked for me, AIO did not.
I still laugh when ppl are still using the AIO root when its been so unreliable in the past. The photon-torpedo method has ALWAYS worked and I don't know why people aren't using the torpedo method to root by default.
OP you must be doing something wrong because the torpedo method still works any many folks have confirmed that.
Glad to hear its still working, here is the error I get:
$ ./photon-torpedo.sh
ERROR: ld.so: object 'libpcprofile.so' cannot be loaded as audit interface: undefined symbol: la_version; ignored.
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
ddxSigGiveUp: Closing log
./photon-torpedo.sh: line 5: /lib/libphoton-torpedo.so: Permission denied
ERROR: ld.so: object 'libphoton-torpedo.so' cannot be loaded as audit interface: invalid ELF header; ignored.
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
ddxSigGiveUp: Closing log
Then looking at the log:
$ cat /var/log/Xorg.0.log
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
(WW) xf86OpenConsole: VT_GETSTATE failed: Bad file descriptor
ddxSigGiveUp: Closing log
following for further developments..
Reboot has changed the message slightly...
$ /data/tmp/photon-torpedo.sh
/data/tmp/photon-torpedo.sh
ERROR: ld.so: object 'libpcprofile.so' cannot be loaded as audit interface: undefined symbol: la_version; ignored.
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
ddxSigGiveUp: Closing log
/data/tmp/photon-torpedo.sh: line 5: /lib/libphoton-torpedo.so: Permission denied
ERROR: ld.so: object 'libphoton-torpedo.so' cannot be loaded as audit interface:
invalid ELF header; ignored.
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
ddxSigGiveUp: Closing log
stevetrooper said:
Reboot has changed the message slightly...
$ /data/tmp/photon-torpedo.sh
/data/tmp/photon-torpedo.sh
ERROR: ld.so: object 'libpcprofile.so' cannot be loaded as audit interface: undefined symbol: la_version; ignored.
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
ddxSigGiveUp: Closing log
/data/tmp/photon-torpedo.sh: line 5: /lib/libphoton-torpedo.so: Permission denied
ERROR: ld.so: object 'libphoton-torpedo.so' cannot be loaded as audit interface:
invalid ELF header; ignored.
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
ddxSigGiveUp: Closing log
Click to expand...
Click to collapse
You obviously have not done the root torpedo method before or else you would know that the big ole message you just copied is anticipated and you don't need to worry. You have root successfully.
Just follow this video
http://www.youtube.com/watch?v=zb3Yh_NmSBk
ericdabbs said:
You obviously have not done the root torpedo method before or else you would know that the big ole message you just copied is anticipated and you don't need to worry. You have root successfully.
Just follow this video
http://www.youtube.com/watch?v=zb3Yh_NmSBk
Click to expand...
Click to collapse
Unfortunately the script does not give me the # prompt. So when you run the install-su script it fails. I found others that had the same problem and they never figured out how to get it to work.
ERROR: ld.so: object 'libphoton-torpedo.so' cannot be loaded as audit interface: invalid ELF header; ignored.
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
ddxSigGiveUp: Closing log
$ ./install-su.sh Usage: mount [-r] [-w] [-o options] [-t type] device directory cp: /system/bin/su: Read-only file system Unable to chmod /system/bin/su: Read-only file system Usage: mount [-r] [-w] [-o options] [-t type] device directory rm failed for /lib/libphoton-torpedo.so, Permission denied.
just a shot in the dark from a total NOOB are you using an terminal emulator on the phone or via computer??? I needed to do it via computer torpedo worked for me.... just trying to help...... sometimes the most obvious things are overlooked
tiny2nz said:
just a shot in the dark from a total NOOB are you using an terminal emulator on the phone or via computer??? I needed to do it via computer torpedo worked for me.... just trying to help...... sometimes the most obvious things are overlooked
Click to expand...
Click to collapse
Thanks, I have tried with Android Terminal Emulator and adb shell from my PC, neither worked.
tiny2nz said:
just a shot in the dark from a total NOOB are you using an terminal emulator on the phone or via computer??? I needed to do it via computer torpedo worked for me.... just trying to help...... sometimes the most obvious things are overlooked
Click to expand...
Click to collapse
That's a very valid point. After the first soak, many people they needed to use computer, not emulator, for it to work. Wonder is s/he has the right computer drivers?
---------- Post added at 12:59 PM ---------- Previous post was at 12:57 PM ----------
stevetrooper said:
Thanks, I have tried with Android Terminal Emulator and adb shell from my PC, neither worked.
Click to expand...
Click to collapse
Do you have the right drivers? i.e. - do other adb commands work?
willysp said:
That's a very valid point. After the first soak, many people they needed to use computer, not emulator, for it to work. Wonder is s/he has the right computer drivers?
---------- Post added at 12:59 PM ---------- Previous post was at 12:57 PM ----------
Do you have the right drivers? i.e. - do other adb commands work?
Click to expand...
Click to collapse
I downloaded the drivers from the photon torpedo thread. adb works just fine, can push the file to the photon, without any errors. I even tried adb on 2 different computers, Windows XP and the other Windows 7.
The photon-torpedo.sh is very simple:
#!/bin/bash
umask 0
LD_AUDIT="libpcprofile.so" PCPROFILE_OUTPUT="/lib/libphoton-torpedo.so" /usr/bin/X
cat /data/tmp/libphoton-torpedo.so > /lib/libphoton-torpedo.so
LD_AUDIT="libphoton-torpedo.so" /usr/bin/X
When I look in /lib the file libphoton-torpedo.so exists and has a timestamp from when I ran, so its catting the file correctly.
I don't get the # prompt, so running install-su.sh does not work.
Found this in the photon-torpedo thread in Development:
Sparky_McBurning said:
I figured out the problem and a fix.
Problem:
If /lib/libphoton-torpedo.so was not removed from /lib before the OTA update, the permissions are updated to no longer be over-writable, so the /data/tmp/photon-torpedo.sh step that 'cat's libphoton-torpedo cannot re-write the file with new permissions.
Fix:
Update photon-torpedo.sh to use a different filename for libphoton-torpedo.so. I used libphoton-torpedo2.so. No problems. Just make sure you remove any versions of libphoton-torpedo.so from /lib/ after rooting, and you won't have this problem in the future.
Click to expand...
Click to collapse
Hello everyone I'm new to android and have been trying to run Emscripten on it: I've ported over the necessary dependencies: Node, Python, Fastcomp/Clang via the NDK Toolchain and tested with the Android Emulator (from Android SDK) inside the the Android Terminal Emulator (from jackpal's github) but when I finally attempted to run Emscripten itself as so:
Code:
cd /data/data/jackpal.androidterm/shared_prefs
bin/python2 emscripten-1.22.1/emcc -v
I ran into some rather vague error messages:
Code:
[2] + Stopped (signal) bin/python emscripten-1.22.1/emcc -v
[1] - Segmentation fault bin/python emscripten-1.22.1/emcc -v
Does anyone have any ideas on this? I there a way I can get better debugging info to help find the problem?
I think I figured out the problem. Those error seem to come from python. Particularly python seems to be crashing. Trying the python console doing a simple:
Code:
import shutil
will crash the interpreter. Since discovering this I've found many other things that will crash python in my setup. So I guess it wasn't such a good port after all.
I ran some test in the python interpreter as this is what I go so far:
These modules are fine:
Code:
os, platform, re, pprint, atexit, subprocess, sys, time, string, struct
These modules will crash python:
Code:
optparse, logging, urlparse, SocketServer, cgi shutil, tempfile, shlex
These modules will spit out error messages but not crash python:
Code:
BaseHTTPServer, SimpleHTTPServer, socket,
Don't really, no what is cause this yet.
After trying to build python several different ways and not getting those modules to work I broke down and decided to try out Python4Android. And it works. After following their guide on getting it to work in the shell, I test the modules and they were fine. After that I pushed my builds of fastcomp(llvm/clang) and node.js and the Emscripten python scripts ot Py4A's files location and then tried to run emcc (emscripten's compiler).
The scripts needed a little (very little) tweeking to get them to work but they worked. And now I'm going to try and copy Py4A's files to Android Terminal Emulators' location. If that works to my satisfaction I'll try to get these to work with VimTouch.
Hello friends!
I am using Termux in order to run ruby.
I installed ruby successfully with "apt" command, and it functions fine.
Current ruby version:
Code:
$ ruby -v
ruby 2.3.3p222 (2016-11-21 revision 56859) [arm-linux-androideabi]
The problem is, I can't really install gems. I tried to install bettercap for the experiment, but it failed. This is what I get:
Code:
$ gem install bettercap
Fetching: colorize-0.8.1.gem (100%)
Successfully installed colorize-0.8.1
Fetching: network_interface-0.0.1.gem (100%)
Building native extensions. This could take a while...
ERROR: Error installing bettercap:
ERROR: Failed to build gem native extension.
current directory: /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1/ext/network_interface_ext
/data/data/com.termux/files/usr/bin/ruby -r ./siteconf20161129-14856-1cclchu.rb extconf.rb
mkmf.rb can't find header files for ruby at /data/data/com.termux/files/usr/lib/ruby/include/ruby.h
extconf failed, exit code 1
Gem files will remain installed in /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1 for inspection.
Results logged to /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/extensions/arm-linux/2.3.0/network_interface-0.0.1/gem_make.out
I found some instructions if I ran "gem help install" but I couldn't really understand what to do in order to fix that.
Can anyone help me to solve this? BTW I have a rooted device so I can use "su" and "sudo" and all that stuff...
Thanks for people who answer~
FurySh0ck said:
Code:
mkmf.rb can't find header files for ruby at /data/data/com.termux/files/usr/lib/ruby/include/ruby.h
Click to expand...
Click to collapse
You can install ruby.h with:
Code:
apt install ruby-dev
.
fornwall said:
You can install ruby.h with: .
Click to expand...
Click to collapse
I installed ruby-dev but it still won't work. It tells me it saved a log file which contains the explanation to the failure. I'll post the whole code, but please pay attention to the last part of it:
Code:
apt install bettercap
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bettercap
$ gem install bettercap
Building native extensions. This could take a while...
ERROR: Error installing bettercap:
ERROR: Failed to build gem native extension.
current directory: /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1/ext/network_interface_ext
/data/data/com.termux/files/usr/bin/ruby -r ./siteconf20161206-31345-1xerjr9.rb extconf.rb
[*] Running checks for netifaces code...
[*] Warning : this platform as not been tested
checking for getifaddrs()... *** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of necessary
libraries and/or headers. Check the mkmf.log file for more details. You may
need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/data/data/com.termux/files/usr/bin/$(RUBY_BASE_NAME)
/data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:456:in `try_do': The compiler failed to generate an executable file. (RuntimeError)
You have to install development tools first.
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:541:in `try_link0'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:556:in `try_link'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:765:in `try_func'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:1051:in `block in have_func'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:942:in `block in checking_for'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:350:in `block (2 levels) in postpone'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:320:in `open'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:350:in `block in postpone'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:320:in `open'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:346:in `postpone'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:941:in `checking_for'
from /data/data/com.termux/files/usr/lib/ruby/2.3.0/mkmf.rb:1050:in `have_func'
from extconf.rb:43:in `<main>'
To see why this extension failed to compile, please check the mkmf.log which can be found here:
/data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/extensions/arm-linux/2.3.0/network_interface-0.0.1/mkmf.log
extconf failed, exit code 1
Gem files will remain installed in /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/gems/network_interface-0.0.1 for inspection.
Results logged to /data/data/com.termux/files/usr/lib/ruby/gems/2.3.0/extensions/arm-linux/2.3.0/network_interface-0.0.1/gem_make.out
Any solutions in mind?
BTW Thanks for your time, I appreciate anyone who tries to help.