Guys,
Recently ditched my Desire HD which I've had alot of fun with for (what I considered to be) a far superior phone but basically got a little fed up with the display after catching a glimps of the SGS2's screen, haven't had the HD on since!
Although I considered myself adapt at flashing and rooting, I have to admit to finding myself a little confused here as to what exactly I can do with my phone. Yep, I've searched, nope, I don't want flamed, just need a few things cleared up then I'm off to have some fun!
Details from my phone...
PDA: I9100XWKF3
PHONE: I9100XXKH3
CSC: I9100CPWKD1
I'm rooted using CF matched Kernel and have remained on that, does no harm as far as i'm aware except for yellow triangle at boot..
I'd like to go from 2.3.3 to 2.3.4 too and wondering about what to flash and what would fit, my CSC is Carphone Warehouse would that be correct? How important is it to match CSC?
Regards Baseband, doesn't really matter does it but no harm in trying modems is there?
And firmware, thought about Frankenstein XXKF3 or 4 or am I getting things totally wrong? Think it's the WK to XX and not sure what impact that'll have.
And on that note, does the firmware version stiplulate which ROM I can load? So if i go to 2.3.4 (XXKH3 or 4) am I then limited to flashing only XXKH3 or 4 ROM's? Does it matter what I flash over my phone? I've also read that some ROM's contain Kernels and may have to flash a stock kernel after flashing the ROM to match firmware or even re-root?
Actually the more I read back on that, appears I know nothing at all and that's not even funny! Even went back to the original SGS forums in the hope that I'd find what I need there.
I know that unless I move back to stock (which I am at the moment), Kies wont off the eventual 2.3.4 update but to be honest I'm not fussed as developers and cooks here do a much better job and that's experience from my HD days.
I have flashed MIUI as that's the ROM I used longest on the HD, loved it but quickly went back the more I satrted to read and to be honest, would prefer to stay stock for a while and get used to the phone, is that do-able with a flash from the developers forum?
So does the ROM have to match the firmware I'm currently using, can I upgrade to 2.3.4 firmware, choose a kernel of my choice and any rom?
Obviously not picking something up, hopefully someone has the answer I need without the links to pages read allready, want to start having some fun and soon!
Cheers!
I
'd like to go from 2.3.3 to 2.3.4 too and wondering about what to flash and what would fit, my CSC is Carphone Warehouse would that be correct? How important is it to match CSC?
Click to expand...
Click to collapse
csc is what contains your data settings and is need for internet you should keep the one you have for best internet quality.
Regards Baseband, doesn't really matter does it but no harm in trying modems is there?
Click to expand...
Click to collapse
no it does not matter if you use different modems.
And firmware, thought about Frankenstein XXKF3 or 4 or am I getting things totally wrong? Think it's the WK to XX and not sure what impact that'll have.
Click to expand...
Click to collapse
firmware is read by the last three letters KF3 is what you currently have.
there is no problem upgrading to KH4.
And on that note, does the firmware version stiplulate which ROM I can load? So if i go to 2.3.4 (XXKH3 or 4) am I then limited to flashing only XXKH3 or 4 ROM's? Does it matter what I flash over my phone? I've also read that some ROM's contain Kernels and may have to flash a stock kernel after flashing the ROM to match firmware or even re-root?
Click to expand...
Click to collapse
no your not limited to flashing any rom, you can mix and match arounding to your needs and preferences.
after rooting they reflash the kernal to get rid of the yellow triangle, there is a tuturial for that chainfire's rooting thread, 2nd post.
So does the ROM have to match the firmware I'm currently using, can I upgrade to 2.3.4 firmware, choose a kernel of my choice and any rom?
Click to expand...
Click to collapse
no the rom does not match the firmware, yes you can upgrade to 2.3.4.
yes you choose the kernal and rom that you prefer.
All roms contain a kernel .
CSC is not really required as long as you enter the settings for your network manually but stick to cwm or xeu for UK ..
CSC are not upgraded and are often much older than the rom version .
KH3 probably the best current modem .
Rom is the whole firmware kernel modem OS etc .
You can have a KF2 firmware and swap kernel to KH2 and modem to KG2 in theory and it will work most of the time for varying combinations .
USB jif is better than flashing kernel to remove warning triangle as it also resets rom counter to zero
Me >>Cognition 1.51 rom based on KH3 and i have KG2 modem and no CSC .
Kernels have swapped just the kernel about four times on this and swapped and tried every rom on here .
Rom backed up using Nandroid via CWM recovery and apps backed up using Titanium pro .
Even a failed boot is usually recoverable with ease on SGS2 .
jje
Related
Hi,
I want to install cognition s2 rom on my galaxy s2 but first I wanted to know how can I go back to the stock rom if I happen to dislike the custom rom? I searched but couldn't find a concrete answer.
Thanks
Standard Method is flash a stock rom .
Reset custom rom counter to zero with usb recovery jig .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Ok so maybe you can explain to me what's the difference between a rom and a kernel/firmware? Because I only see kernels on the page you sent me =)
Also, does it matter which phone/modem, csc I flash? If so how does it affects my phone?
rj.camargo said:
Ok so maybe you can explain to me what's the difference between a rom and a kernel/firmware? Because I only see kernels on the page you sent me =)
Also, does it matter which phone/modem, csc I flash? If so how does it affects my phone?
Click to expand...
Click to collapse
a kernel is what directly interacts with the hardware. Every OS has this, but it's more customizable on our phones since it's based on Linux. The Rom contains the OS itself, and the software and file structure therein. The kernel even can tell the OS how fast the processor goes and how much juice to use from the battery.
from the link that JJEgan gave you, u just pick the one you want and flash with odin...thats all you need to do
nraman1 said:
a kernel is what directly interacts with the hardware. Every OS has this, but it's more customizable on our phones since it's based on Linux. The Rom contains the OS itself, and the software and file structure therein. The kernel even can tell the OS how fast the processor goes and how much juice to use from the battery.
from the link that JJEgan gave you, u just pick the one you want and flash with odin...thats all you need to do
Click to expand...
Click to collapse
Ok get it but lets say I want to upgrade to 2.3.5, I understand that I have to flash the KI3 rom right? But do I need to flash the whole package (pda, phone/modem and csc) or just the kernel intratech posted?
lol sorry but I'm a total newb on android
rj.camargo said:
Ok get it but lets say I want to upgrade to 2.3.5, I understand that I have to flash the KI3 rom right? But do I need to flash the whole package (pda, phone/modem and csc) or just the kernel intratech posted?
lol sorry but I'm a total newb on android
Click to expand...
Click to collapse
A kernel is not the firmware
so flash as instructed with whatever 2.3.5 upgrade you are using .
jje
if you want 2.3.5 then you have to flash the whole package, just download one of the files from that site and flash in odin under the PDA bit
Hi there,
Total noob here, so bear with me.
I recently bought a SGS2 and flashed it with CF-Root without any problem to KJ3.
Now, I saw there's this new KK2/5, with 2.3.6, and I was thinking about updating, if possible using CWM Manager. I guess I should follow the steps in the second part of this post.
Now my questions are:
1. Do I need to flash first the stock firmware? Or can I just directly flash the new CF-Root?
2. What does "factoryfs ("system") is mandatory part at the moment. " mean?
3. I noticed there is no stock KK5 in Intratech's thread so far (just a Frankenstein, still not completely sure what that means). Does that mean I cannot use KK5 CF-Root? Should I better go with KK2?
4. Can I flash directly CF-Root kernel and the rest of the stock firmware together? Or should I first flash the full stock FW and then flash CF-Root? Would I lose root and CMW then? That would mean I'd have to flash CF-Root via Odin, right?
5. Last stupid question. Where is the thanks button??
Thanks everyone.
1. You need stock firmware, CF-Root only gives kernel.
3. As previously answered, CF-Root goes side by side with stock ROM, if there's no stock ROM available for latest CF-Root, get a lower version.
4. You should flash first stock, then CF-Root. You will loose root & CWM.
5. The thanks button is just below this answer, near the Quote button.
pancomido said:
Hi there,
Total noob here, so bear with me.
I recently bought a SGS2 and flashed it with CF-Root without any problem to KJ3.
Now, I saw there's this new KK2/5, with 2.3.6, and I was thinking about updating, if possible using CWM Manager. I guess I should follow the steps in the second part of this post.
Now my questions are:
Click to expand...
Click to collapse
Firstly if you are flashing and rooting flawlessly you are no longer a noob ... i get you are trying to upgrade and root .........
1. Do I need to flash first the stock firmware? Or can I just directly flash the new CF-Root?
Click to expand...
Click to collapse
I'd recommend you flash the stock firmware as there may be incompatibilities with the Kernel and existing PDA , MODEM and CSC. Plus no one just uses the newer kernel ppl flash / upgrade the entire firmware so that they can actually kernel is like the heart of the system responsible for power distribuation and stuff. PDA is the main firmware component UI sortof like the middleware .
2. What does "factoryfs ("system") is mandatory part at the moment. " mean?
Click to expand...
Click to collapse
CWM is usually used to flash the kernel or zImage files. For flashing entire firmware via SD card i'd recommend Mobile Odin Pro by Chainfire which consumes the entire tar file and keeps root intact. This'll change your firmware and kernel while keeping you rooted just flash a CF-Root after that.
3. I noticed there is no stock KK5 in Intratech's thread so far (just a Frankenstein, still not completely sure what that means). Does that mean I cannot use KK5 CF-Root? Should I better go with KK2?
Click to expand...
Click to collapse
Frankenstein is just a combination of different Modem/CSC(Usually Multi) and PDA of the latest firmwares which is combined for the best performance is most importantly Non-Wipe ROM. Intra usually puts in a Multi-CSC for several region's use.
4. Can I flash directly CF-Root kernel and the rest of the stock firmware together? Or should I first flash the full stock FW and then flash CF-Root? Would I lose root and CMW then? That would mean I'd have to flash CF-Root via Odin, right?
Click to expand...
Click to collapse
Yeah pretty much but i'd say you give mobile Odin a try i've heard it's pretty cool. When using a computer use Stock first and then root.
5. Last stupid question. Where is the thanks button??
Click to expand...
Click to collapse
Just left most button on the right side of this post is activated for a forum when you post for the first time.
Thanks Az,
I can't see the Thanks button in any other thread. Do I have to write first before it becomes available?
So, if i need the stock kernel first, what are the instructions in the post I linked (CF-Root v5.0: Upgrading your firmware) for? Flashing full firmwares that already have CF-Root included? Wouldn't that be the same as if I got the other FW files (phone, CSC) from stock and added the CF-Root kernel (pda)?
Any idea about question #2?
Thanks again.
At first follow the instructions in this thread and flash kk2 or kk5 as you want the newest ;p : http://forum.xda-developers.com/showthread.php?t=1075278
Then when you flashed a full new firmware from that guide you can proceed to the instructions of CF-root with the matching kernel (kk2 or kk5 just the same version as you chosen in the previous step) from that topic to flash and gain root and CWM.
CF-root is only a kernel that is modified, so it is only a small part of a firmware but with nice extra features added.
pancomido said:
Thanks Az,
I can't see the Thanks button in any other thread. Do I have to write first before it becomes available?
So, if i need the stock kernel first, what are the instructions in the post I linked (CF-Root v5.0: Upgrading your firmware) for? Flashing full firmwares that already have CF-Root included? Wouldn't that be the same as if I got the other FW files (phone, CSC) from stock and added the CF-Root kernel (pda)?
Any idea about question #2?
Thanks again.
Click to expand...
Click to collapse
Yeah it activates in the forum/thread you write in .....
yup stock kernels are signed by samsung and hence are requred for flasing over CF_Root kernels. as they remove the yellow triangle. factoryfs simply stands for factory file system it is recommended to include in case the newer firmware has a change in the file system / tables if you don't include it while flashing firmware using CWM you might end up bricking your phone. But the FW flashing process through CWM is pretty complicated and cumbersome i use odin as it is a simple job.
Thanks, everyone. Sorry for the crosspost, digi. When I saw your answer, I couldn't edit it for five minutes because I'm too new.
Anyway, I would try Mobile Odin Pro, but the country I'm in doesn't support paid apps, so it shows as incompatible with my device...
The only reason I'd wanted to use CMW was in order to avoid the flash counter (which is stupid because it is already on 2 or 3, I guess) and the yellow triangle removal process. So I guess it is not much of a problem.
Ok, so here's another question. What is this non-wipe stuff? It means I don't need to factory reset the phone after flashing?
Also, would you guys reccommend to use the Frankenstein FW with KK5 and the CF-Rooting to KK5? If these Frankenstein FW are created for better performance, the only difference is that they're not the stock configuration and won't allow me to update via Kies, but otherwise should give a better experience, right?
Sorry for being a scary cat, I just don't want to break my phone too quickly.
digi_fort said:
Yeah it activates in the forum/thread you write in .....
yup stock kernels are signed by samsung and hence are requred for flasing over CF_Root kernels. as they remove the yellow triangle. factoryfs simply stands for factory file system it is recommended to include in case the newer firmware has a change in the file system / tables if you don't include it while flashing firmware using CWM you might end up bricking your phone. But the FW flashing process through CWM is pretty complicated and cumbersome i use odin as it is a simple job.
Click to expand...
Click to collapse
digi_fort said:
Firstly if you are flashing and rooting flawlessly you are no longer a noob ... i get you are trying to upgrade and root .........
I'd recommend you flash the stock firmware as there may be incompatibilities with the Kernel and existing PDA , MODEM and CSC. Plus no one just uses the newer kernel ppl flash / upgrade the entire firmware so that they can actually kernel is like the heart of the system responsible for power distribuation and stuff. PDA is the main firmware component UI sortof like the middleware .
CWM is usually used to flash the kernel or zImage files. For flashing entire firmware via SD card i'd recommend Mobile Odin Pro by Chainfire which consumes the entire tar file and keeps root intact. This'll change your firmware and kernel while keeping you rooted just flash a CF-Root after that.
Frankenstein is just a combination of different Modem/CSC(Usually Multi) and PDA of the latest firmwares which is combined for the best performance is most importantly Non-Wipe ROM. Intra usually puts in a Multi-CSC for several region's use.
Yeah pretty much but i'd say you give mobile Odin a try i've heard it's pretty cool. When using a computer use Stock first and then root.
Just left most button on the right side of this post is activated for a forum when you post for the first time.
Click to expand...
Click to collapse
Super informative
pancomido said:
Thanks, everyone. Sorry for the crosspost, digi. When I saw your answer, I couldn't edit it for five minutes because I'm too new.
Anyway, I would try Mobile Odin Pro, but the country I'm in doesn't support paid apps, so it shows as incompatible with my device...
The only reason I'd wanted to use CMW was in order to avoid the flash counter (which is stupid because it is already on 2 or 3, I guess) and the yellow triangle removal process. So I guess it is not much of a problem.
Ok, so here's another question. What is this non-wipe stuff? It means I don't need to factory reset the phone after flashing?
Also, would you guys reccommend to use the Frankenstein FW with KK5 and the CF-Rooting to KK5? If these Frankenstein FW are created for better performance, the only difference is that they're not the stock configuration and won't allow me to update via Kies, but otherwise should give a better experience, right?
Sorry for being a scary cat, I just don't want to break my phone too quickly.
Click to expand...
Click to collapse
Most of the stock roms provided directly are wipe means they reset the system SD card when flashed. Intratech removes the script from the ROM specifically from the Frankenstein. About CF's Mobile Odin there are other ways to get it PM ChainFire himself for it and just give him a beer offline. Any flash of a different region via Odin will not allow you to update via KIES for that you need to flash the stock ROM of your specific region and then update it to the new ROM for your region it will as it is be provided by intratech in his thread eliminating the use of KIES entirely.
Nice, thanks. I've been reading on CF Mobile Odin, maybe I'll contact him and give it a try then.
So, any reason I should not flash the newest Frankestein FW and then root it with CF-Root?
Also, if CSC doesn't have anything to do with the supported languages, what does it do exactly? I read it is specific region settings, what if my carrier is not included? Would that be a problem? I live in China, using China Mobile.
Thanks, guys.
pancomido said:
Nice, thanks. I've been reading on CF Mobile Odin, maybe I'll contact him and give it a try then.
So, any reason I should not flash the newest Frankestein FW and then root it with CF-Root?
Also, if CSC doesn't have anything to do with the supported languages, what does it do exactly? I read it is specific region settings, what if my carrier is not included? Would that be a problem? I live in China, using China Mobile.
Thanks, guys.
Click to expand...
Click to collapse
Sorry weekend pretty busy
Nope no reason why you should'nt ........ Frankenstein is pretty much stock only a bit tweaked .... personally i never flash CSC for my region ...... yea they are supposed to provide APN settings and all but for you guys there in china there have been certain issues .... i would recommend you flash the CSC after you flash the ROM your region's CSC would be available in the frankenstien section as well .... just ensure after flashing the ROM everything is in order.
Thanks digi. I almost forgot about this thread. I ended up flashing Frankenstein KK5 and then Siyah Kernel to give it a try. I didn't flash CSC, but I haven't had any problem. It seems APN settings are grabbed from the network or the SIM or something. I have no idea. What are the issues you referred to in China?
I am trying to find my way into a Chinese forum, but my limited Mandarin is making things difficult. After reading a lot, I arrived to the conclusion that most problems (battery, connectivity, gps lock...) are carrier/location related (I mean, if you flash correctly and everything seems to be running fine). So I thought I should try getting some local information. Hope I can achieve something, because I am getting really poor battery when wifi is on...
Is there any place where one can compare modem/kernel/rom/battery performance in relation to location/carrier. I think that would be sooo useful. Maybe I should give MIUI a try, since it is Chinese...
Well I've googled quite a few key words to see if I could get the answers to my questions and I haven't found too much yet. I have a Bell Galaxy SII that's rooted 2.3.3 Android version. I ended up flashing my kernel long ago as well which gives me the yellow triangle now I don't care about that but i want to make my phone like it was when it came out of the box. I have the original firmware and kernel. What im confused about is there is Odin to flash this and that and then there's dumping the files on your phone and using Clockwordmod. what's the difference? which should I use and what do I flash first? the original Kernel then firmware? or other way around? or does it matter? youtube is nice and all but it shows customs unroots for branded S2's not mine which is Bell im having issues with my tethering disconnecting me from my computer so I think it's best if I revert back to factory since all I do is make phone calls and tether. Thanks guys
PS more info if this helps
Model: GT-I9100M
Android: 2.3.3
Baseband: I9100MUGKG2
Kernel Version: 2.6.35.7-I9100JPKG2-CL342890 [email protected] #2
Build Number: GINGERBREAD.UGKG2
Long story short downlown firmware you want and flash in odin this will be the default firmware without any root..
Nyssa1104 said:
Long story short downlown firmware you want and flash in odin this will be the default firmware without any root..
Click to expand...
Click to collapse
thanks, once I do that do I repeat the process in Odin to flash my original kernel as well ? and that should also remove my yellow triangle right?
Philminator said:
thanks, once I do that do I repeat the process in Odin to flash my original kernel as well ? and that should also remove my yellow triangle right?
Click to expand...
Click to collapse
No as you have just flashed an original kernel .
Reset custom rom counter with USB Jig .
jje
the moment you flash a stock rom it will contain the stock kernel so you would lose root and all the custom stuff you had, basically what you have is an out of the box device
RorixRebel said:
the moment you flash a stock rom it will contain the stock kernel so you would lose root and all the custom stuff you had, basically what you have is an out of the box device
Click to expand...
Click to collapse
perfect thanks im just messing around right now with going back stock to see if that fixes my issue with getting Disconnected when I tether now I wrote all this info down so I can go back and forth over time and experiment with different roms
most of the custom roms do not support tether which sucks, but yeah its part of the fun to flash stuff over and over
agreed with above posters, flash it over and over again until you fully understand how the flashing really work
my sgs2 download counter has reach 16 because I was affraid to use cwm flash, so i went back and forth from original rom to custom rom
Hi guys... tried searching hi and low for the right answer, but didn't get one definitive enough. Bare with me, I have a Galaxy Nexus, but am helping out my wife here who has an i9100M.
First off, I'm well aware of how to use ODIN and the like (as I previously owned the original SGS), so I don't need help with that.
Now.. on to business:
The stock firmware for the i9100m via KIES is 4.0.3. I've noticed that this firmware causes the phone to freeze up at times and she's telling me she didn't experience that under Gingerbread.
So I know there are a whole slew of stock 4.0.4 firmwares out there, unbranded UK's and the like. Just wondering, based on your experiences, which PDA, PHONE, CSC combination for a 4.0.4. rom works best with the i9100m?
I'm aware that I will lose the 'm' designation... not too concerned about that... just want this phone to be smooth as it once was without the lockups but maintaining ICS. Hopefully 4.0.4 actually eliminates that.
Again, I'd prefer the stock firmwares if thats an option.
Thanks guys.
greeced said:
Hi guys... tried searching hi and low for the right answer, but didn't get one definitive enough. Bare with me, I have a Galaxy Nexus, but am helping out my wife here who has an i9100M.
First off, I'm well aware of how to use ODIN and the like (as I previously owned the original SGS), so I don't need help with that.
Now.. on to business:
The stock firmware for the i9100m via KIES is 4.0.3. I've noticed that this firmware causes the phone to freeze up at times and she's telling me she didn't experience that under Gingerbread.
So I know there are a whole slew of stock 4.0.4 firmwares out there, unbranded UK's and the like. Just wondering, based on your experiences, which PDA, PHONE, CSC combination for a 4.0.4. rom works best with the i9100m?
I'm aware that I will lose the 'm' designation... not too concerned about that... just want this phone to be smooth as it once was without the lockups but maintaining ICS. Hopefully 4.0.4 actually eliminates that.
Again, I'd prefer the stock firmwares if thats an option.
Thanks guys.
Click to expand...
Click to collapse
You need to read this first about ICS 4.0.4 stock firmware
Thanks, but I'm guessing that had to do with people flashing a new .pit which I never do.... Unless I'm wrong.
Personally I find stock roms not as smooth as custom roms.
If you're willing to try out custom roms, I'll recommend RootBox. Very stable and smooth.
http://forum.xda-developers.com/showthread.php?t=1696419
EDIT: Sorry, just realized you were looking for stock firmware. I have a i9100m as well, used XXLPJ to restore my phone when I got stuck in a boot-loop. Didn't really play with stock rom that much, went straight back to custom roms and flashed XXLQ5 modem. I'm with Rogers btw.
Ya I know Stock Roms usually aren't as smooth.. I just find the Stock Firmware, with the Stock recovery, the safest.... And seeing as I don't want my wife yelling at me.. I'd rather it have a stock experience without the lockup/freeze she is now constantly experiencing.
greeced said:
Thanks, but I'm guessing that had to do with people flashing a new .pit which I never do.... Unless I'm wrong.
Click to expand...
Click to collapse
If you are not rooting the device, you should be safe.
XWLPX is the most stable Stock ICS 4.0.4 firmware at the moment
Firmware info:
I9100XWLPX
Base Firmware: I9100XWLPX (4.0.4)
Region: Europe
Country Nordic Countries
Carrier: Unbranded
Build Date: 29 August 2012
Modem: XXLQ6
CSC: NEELP5
Change List: 1068762
DOWNLOAD
Jokesy said:
If you are not rooting the device, you should be safe.
XWLPX is the most stable Stock ICS 4.0.4 firmware at the moment
Firmware info:
I9100XWLPX
Base Firmware: I9100XWLPX (4.0.4)
Region: Europe
Country Nordic Countries
Carrier: Unbranded
Build Date: 29 August 2012
Modem: XXLQ6
CSC: NEELP5
Change List: 1068762
DOWNLOAD
Click to expand...
Click to collapse
So even rooting with a STOCK insecure kernal would have bricking issues?
I've never used CWM and don't plan to.
greeced said:
So even rooting with a STOCK insecure kernal would have bricking issues?
I've never used CWM and don't plan to.
Click to expand...
Click to collapse
If you want to Root, use this method
Remember: you must never wipe or backup rom in CWM recovery!
Jokesy said:
If you want to Root, use this method
Remember: you must never wipe or backup rom in CWM recovery!
Click to expand...
Click to collapse
Ya.. thanks.. like I said.. I only use the stock recovery... I never understood why people used CWM recovery.. even on my old SGS.
Thanks for the info... hopefully that ROM you suggested works well here in Canada.
greeced said:
Ya.. thanks.. like I said.. I only use the stock recovery... I never understood why people used CWM recovery.. even on my old SGS.
Thanks for the info... hopefully that ROM you suggested works well here in Canada.
Click to expand...
Click to collapse
Read that Warning thread I posted to you earlier. Read everything there, it's very important. The only way to stay 100% safe is by flashing a custom kernel.
From what I read, flashing a stock or insecure stock kernal (to root) is the only safe way. Especially in that Nordic firmware thread you mentioned.
Either way, going to try it the insecure kernal root. If it bombs, it still has warranty.
Well as suggested in this thread (thank you) I have installed the latest Nordic ROM (I9100XWLPX) and so far things are fantastic.
I ran the 'Have Brickbug?' app and my wife's phone does show the warning, but ran it anyway... even went as far as clearing cache and wiping in the stock recovery after install just to see if there would be an issue and there wasn't.
I haven't rooted the phone.... yet.... and I may not have to... afterall, its my wife's phone and she doesn't use it the way I use my Nexus. That might change in the future, but with this UNBRANDED ROM, there is no real bloatware, and most of the things I don't want can be disabled anyway.
Time will tell if there are any issues... but thus far no freezes or lockups.
KIES did screw up the back up of her memo's and settings which she is slightly peeved about (wouldn't restore them), but oh well.
Thanks for all the suggestions and help.
Question though... If official Jellybean comes out for the Nordic region, will this 'frankenstein phone' receive an update via KIES? I don't plan on using the OTA update.
I was using the S2 with Jelly Bean. I found the phone to heat up very quickly around the camera lens and top of the phone rather than when running on Ginger Bread. I then installed the Resurrection Remix Custom ROM v5.1.3 with KitKat 4.4.2.
But the heating problem is still there. Checking online I found out that the modem was the problem.I found the KH3 modem was the best for the Galaxy S2. I was wondering if installing the KH3 modem was appropriate on Custom ROM or can modems be installed only on Custom ROM???
If it can be installed can anyone guide me how ... BTW I am using the phone in India ...
Please reply the overheating problem is driving me nuts.
Attatched is a screenshot showing my phone information.
You question is a bit confused (because you haven't taken the time to learn 'the basics' like 95% of people who come here), but the answer is yes. Modems are interchangeable between Android versions on the S2 & not dependent on same; I.E you can flash a modem that was bundled with stock rom that was a different Android version to the one you're currently running (whether stock or custom, makes no difference).
As to how to flash a modem....C'mon....
This is absolute basics, you should know this stuff back to front inside out if you're flashing custom roms.
In other words, search.
MistahBungle said:
You question is a bit confused (because you haven't taken the time to learn 'the basics' like 95% of people who come here), but the answer is yes. Modems are interchangeable between Android versions on the S2 & not dependent on same; I.E you can flash a modem that was bundled with stock rom that was a different Android version to the one you're currently running (whether stock or custom, makes no difference).
As to how to flash a modem....C'mon....
This is absolute basics, you should know this stuff back to front inside out if you're flashing custom roms.
In other words, search.
Click to expand...
Click to collapse
I know how to flash the modem using Odin ... I was just wondering if I can flash it on any Android version or any Custom or Stock ROM... and just to be sure the modem zipped file is about 4.5mb right?? Coz I found a KH3 modem file on one blog which was about 200MB in size ...
abhijitcools2 said:
I know how to flash the modem using Odin ... I was just wondering if I can flash it on any Android version or any Custom or Stock ROM... and just to be sure the modem zipped file is about 4.5mb right?? Coz I found a KH3 modem file on one blog which was about 200MB in size ...
Click to expand...
Click to collapse
Usually a modem file size should not exceed 10 MB. You can even flash the modem via cwm. On xda you can find links for such files.
banjara said:
Usually a modem file size should not exceed 10 MB. You can even flash the modem via cwm. On xda you can find links for such files.
Click to expand...
Click to collapse
Should I do a NANDroid Backup before flashing the modem ??
abhijitcools2 said:
Should I do a NANDroid Backup before flashing the modem ??
Click to expand...
Click to collapse
That's not required. Just keep a flashable file of your current modem, just in case you want to revert. I mean, download it and keep it on your phone.
For India, ddls9 also works quite well. I have seen good results on xxls8 too.
banjara said:
That's not required. Just keep a flashable file of your current modem, just in case you want to revert. I mean, download it and keep it on your phone.
For India, ddls9 also works quite well. I have seen good results on xxls8 too.
Click to expand...
Click to collapse
If something happens and I restore the phone from a backup of the phone , will the firmware baseband be restored or thats something else??
Firmwares are included in the backup or not??
abhijitcools2 said:
If something happens and I restore the phone from a backup of the phone , will the firmware baseband be restored or thats something else??
Firmwares are included in the backup or not??
Click to expand...
Click to collapse
I am not very sure about that. My guess is that it doesn't backup your modem with the rom backup.