Hi there,
Total noob here, so bear with me.
I recently bought a SGS2 and flashed it with CF-Root without any problem to KJ3.
Now, I saw there's this new KK2/5, with 2.3.6, and I was thinking about updating, if possible using CWM Manager. I guess I should follow the steps in the second part of this post.
Now my questions are:
1. Do I need to flash first the stock firmware? Or can I just directly flash the new CF-Root?
2. What does "factoryfs ("system") is mandatory part at the moment. " mean?
3. I noticed there is no stock KK5 in Intratech's thread so far (just a Frankenstein, still not completely sure what that means). Does that mean I cannot use KK5 CF-Root? Should I better go with KK2?
4. Can I flash directly CF-Root kernel and the rest of the stock firmware together? Or should I first flash the full stock FW and then flash CF-Root? Would I lose root and CMW then? That would mean I'd have to flash CF-Root via Odin, right?
5. Last stupid question. Where is the thanks button??
Thanks everyone.
1. You need stock firmware, CF-Root only gives kernel.
3. As previously answered, CF-Root goes side by side with stock ROM, if there's no stock ROM available for latest CF-Root, get a lower version.
4. You should flash first stock, then CF-Root. You will loose root & CWM.
5. The thanks button is just below this answer, near the Quote button.
pancomido said:
Hi there,
Total noob here, so bear with me.
I recently bought a SGS2 and flashed it with CF-Root without any problem to KJ3.
Now, I saw there's this new KK2/5, with 2.3.6, and I was thinking about updating, if possible using CWM Manager. I guess I should follow the steps in the second part of this post.
Now my questions are:
Click to expand...
Click to collapse
Firstly if you are flashing and rooting flawlessly you are no longer a noob ... i get you are trying to upgrade and root .........
1. Do I need to flash first the stock firmware? Or can I just directly flash the new CF-Root?
Click to expand...
Click to collapse
I'd recommend you flash the stock firmware as there may be incompatibilities with the Kernel and existing PDA , MODEM and CSC. Plus no one just uses the newer kernel ppl flash / upgrade the entire firmware so that they can actually kernel is like the heart of the system responsible for power distribuation and stuff. PDA is the main firmware component UI sortof like the middleware .
2. What does "factoryfs ("system") is mandatory part at the moment. " mean?
Click to expand...
Click to collapse
CWM is usually used to flash the kernel or zImage files. For flashing entire firmware via SD card i'd recommend Mobile Odin Pro by Chainfire which consumes the entire tar file and keeps root intact. This'll change your firmware and kernel while keeping you rooted just flash a CF-Root after that.
3. I noticed there is no stock KK5 in Intratech's thread so far (just a Frankenstein, still not completely sure what that means). Does that mean I cannot use KK5 CF-Root? Should I better go with KK2?
Click to expand...
Click to collapse
Frankenstein is just a combination of different Modem/CSC(Usually Multi) and PDA of the latest firmwares which is combined for the best performance is most importantly Non-Wipe ROM. Intra usually puts in a Multi-CSC for several region's use.
4. Can I flash directly CF-Root kernel and the rest of the stock firmware together? Or should I first flash the full stock FW and then flash CF-Root? Would I lose root and CMW then? That would mean I'd have to flash CF-Root via Odin, right?
Click to expand...
Click to collapse
Yeah pretty much but i'd say you give mobile Odin a try i've heard it's pretty cool. When using a computer use Stock first and then root.
5. Last stupid question. Where is the thanks button??
Click to expand...
Click to collapse
Just left most button on the right side of this post is activated for a forum when you post for the first time.
Thanks Az,
I can't see the Thanks button in any other thread. Do I have to write first before it becomes available?
So, if i need the stock kernel first, what are the instructions in the post I linked (CF-Root v5.0: Upgrading your firmware) for? Flashing full firmwares that already have CF-Root included? Wouldn't that be the same as if I got the other FW files (phone, CSC) from stock and added the CF-Root kernel (pda)?
Any idea about question #2?
Thanks again.
At first follow the instructions in this thread and flash kk2 or kk5 as you want the newest ;p : http://forum.xda-developers.com/showthread.php?t=1075278
Then when you flashed a full new firmware from that guide you can proceed to the instructions of CF-root with the matching kernel (kk2 or kk5 just the same version as you chosen in the previous step) from that topic to flash and gain root and CWM.
CF-root is only a kernel that is modified, so it is only a small part of a firmware but with nice extra features added.
pancomido said:
Thanks Az,
I can't see the Thanks button in any other thread. Do I have to write first before it becomes available?
So, if i need the stock kernel first, what are the instructions in the post I linked (CF-Root v5.0: Upgrading your firmware) for? Flashing full firmwares that already have CF-Root included? Wouldn't that be the same as if I got the other FW files (phone, CSC) from stock and added the CF-Root kernel (pda)?
Any idea about question #2?
Thanks again.
Click to expand...
Click to collapse
Yeah it activates in the forum/thread you write in .....
yup stock kernels are signed by samsung and hence are requred for flasing over CF_Root kernels. as they remove the yellow triangle. factoryfs simply stands for factory file system it is recommended to include in case the newer firmware has a change in the file system / tables if you don't include it while flashing firmware using CWM you might end up bricking your phone. But the FW flashing process through CWM is pretty complicated and cumbersome i use odin as it is a simple job.
Thanks, everyone. Sorry for the crosspost, digi. When I saw your answer, I couldn't edit it for five minutes because I'm too new.
Anyway, I would try Mobile Odin Pro, but the country I'm in doesn't support paid apps, so it shows as incompatible with my device...
The only reason I'd wanted to use CMW was in order to avoid the flash counter (which is stupid because it is already on 2 or 3, I guess) and the yellow triangle removal process. So I guess it is not much of a problem.
Ok, so here's another question. What is this non-wipe stuff? It means I don't need to factory reset the phone after flashing?
Also, would you guys reccommend to use the Frankenstein FW with KK5 and the CF-Rooting to KK5? If these Frankenstein FW are created for better performance, the only difference is that they're not the stock configuration and won't allow me to update via Kies, but otherwise should give a better experience, right?
Sorry for being a scary cat, I just don't want to break my phone too quickly.
digi_fort said:
Yeah it activates in the forum/thread you write in .....
yup stock kernels are signed by samsung and hence are requred for flasing over CF_Root kernels. as they remove the yellow triangle. factoryfs simply stands for factory file system it is recommended to include in case the newer firmware has a change in the file system / tables if you don't include it while flashing firmware using CWM you might end up bricking your phone. But the FW flashing process through CWM is pretty complicated and cumbersome i use odin as it is a simple job.
Click to expand...
Click to collapse
digi_fort said:
Firstly if you are flashing and rooting flawlessly you are no longer a noob ... i get you are trying to upgrade and root .........
I'd recommend you flash the stock firmware as there may be incompatibilities with the Kernel and existing PDA , MODEM and CSC. Plus no one just uses the newer kernel ppl flash / upgrade the entire firmware so that they can actually kernel is like the heart of the system responsible for power distribuation and stuff. PDA is the main firmware component UI sortof like the middleware .
CWM is usually used to flash the kernel or zImage files. For flashing entire firmware via SD card i'd recommend Mobile Odin Pro by Chainfire which consumes the entire tar file and keeps root intact. This'll change your firmware and kernel while keeping you rooted just flash a CF-Root after that.
Frankenstein is just a combination of different Modem/CSC(Usually Multi) and PDA of the latest firmwares which is combined for the best performance is most importantly Non-Wipe ROM. Intra usually puts in a Multi-CSC for several region's use.
Yeah pretty much but i'd say you give mobile Odin a try i've heard it's pretty cool. When using a computer use Stock first and then root.
Just left most button on the right side of this post is activated for a forum when you post for the first time.
Click to expand...
Click to collapse
Super informative
pancomido said:
Thanks, everyone. Sorry for the crosspost, digi. When I saw your answer, I couldn't edit it for five minutes because I'm too new.
Anyway, I would try Mobile Odin Pro, but the country I'm in doesn't support paid apps, so it shows as incompatible with my device...
The only reason I'd wanted to use CMW was in order to avoid the flash counter (which is stupid because it is already on 2 or 3, I guess) and the yellow triangle removal process. So I guess it is not much of a problem.
Ok, so here's another question. What is this non-wipe stuff? It means I don't need to factory reset the phone after flashing?
Also, would you guys reccommend to use the Frankenstein FW with KK5 and the CF-Rooting to KK5? If these Frankenstein FW are created for better performance, the only difference is that they're not the stock configuration and won't allow me to update via Kies, but otherwise should give a better experience, right?
Sorry for being a scary cat, I just don't want to break my phone too quickly.
Click to expand...
Click to collapse
Most of the stock roms provided directly are wipe means they reset the system SD card when flashed. Intratech removes the script from the ROM specifically from the Frankenstein. About CF's Mobile Odin there are other ways to get it PM ChainFire himself for it and just give him a beer offline. Any flash of a different region via Odin will not allow you to update via KIES for that you need to flash the stock ROM of your specific region and then update it to the new ROM for your region it will as it is be provided by intratech in his thread eliminating the use of KIES entirely.
Nice, thanks. I've been reading on CF Mobile Odin, maybe I'll contact him and give it a try then.
So, any reason I should not flash the newest Frankestein FW and then root it with CF-Root?
Also, if CSC doesn't have anything to do with the supported languages, what does it do exactly? I read it is specific region settings, what if my carrier is not included? Would that be a problem? I live in China, using China Mobile.
Thanks, guys.
pancomido said:
Nice, thanks. I've been reading on CF Mobile Odin, maybe I'll contact him and give it a try then.
So, any reason I should not flash the newest Frankestein FW and then root it with CF-Root?
Also, if CSC doesn't have anything to do with the supported languages, what does it do exactly? I read it is specific region settings, what if my carrier is not included? Would that be a problem? I live in China, using China Mobile.
Thanks, guys.
Click to expand...
Click to collapse
Sorry weekend pretty busy
Nope no reason why you should'nt ........ Frankenstein is pretty much stock only a bit tweaked .... personally i never flash CSC for my region ...... yea they are supposed to provide APN settings and all but for you guys there in china there have been certain issues .... i would recommend you flash the CSC after you flash the ROM your region's CSC would be available in the frankenstien section as well .... just ensure after flashing the ROM everything is in order.
Thanks digi. I almost forgot about this thread. I ended up flashing Frankenstein KK5 and then Siyah Kernel to give it a try. I didn't flash CSC, but I haven't had any problem. It seems APN settings are grabbed from the network or the SIM or something. I have no idea. What are the issues you referred to in China?
I am trying to find my way into a Chinese forum, but my limited Mandarin is making things difficult. After reading a lot, I arrived to the conclusion that most problems (battery, connectivity, gps lock...) are carrier/location related (I mean, if you flash correctly and everything seems to be running fine). So I thought I should try getting some local information. Hope I can achieve something, because I am getting really poor battery when wifi is on...
Is there any place where one can compare modem/kernel/rom/battery performance in relation to location/carrier. I think that would be sooo useful. Maybe I should give MIUI a try, since it is Chinese...
Related
Hi all,
A quick question on how easy to roll back (un-root) and put back the stock ROM?
My current ROM is stock Telstra ROM. (just bought the phone today)
PDA: DVKF4
PHONE: DVKF2
CSC: TELKF3
Build Info : Jun 21
I know how to roll back a HTC Desire - by installing the RUU image from HTC or use the PB99IMG.zip install method to remove "root" and put back into std ROM.
I have yet to root my SGS2. Reason to un-root and go back to stock ROM is for warranty purposes. you never know what will happen (for example, my desire decides to dies on me yesterday, had to put back stock ROM to submit for warranty claim).
thank you in advance
http://forum.xda-developers.com/showthread.php?t=1125414
http://forum.xda-developers.com/showthread.php?t=1075278
Very easy basics are install stock rom removes root and use usb jig to clear custom rom counter .
jje
B3311 said:
http://forum.xda-developers.com/showthread.php?t=1125414
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
thanks for the link, however, i can't seem to find the original kernel.
JJEgan said:
Very easy basics are install stock rom removes root and use usb jig to clear custom rom counter .
jje
Click to expand...
Click to collapse
if i do not install any custom rom, therefore, the usb jig is not required, right?
cad_2011 said:
if i do not install any custom rom, therefore, the usb jig is not required, right?
Click to expand...
Click to collapse
Nope. Jig is only required to clear the custom Rom counter, in case you have to claim warranty and return the phone to Samsung. And also to force the phone in Download mode, if something bad happens while flashing custom ROM etc.
hey cad,
Made any headway here?
I just bought an SGS2 from Telstra as well and I have a similar phone to yours.
PDA: DVKF4
PHONE: DVKF2
CSC: TELKF3
I too would like to retain the stock kernel, firmware and csc.
If we root with an insecure kernel, how do we go back to stock kernel if it's not downloadable?
Could we just flash another kernel if we are making a warranty claim and hope they don't check?
I assume CSC is where all the Telstra crap is stored and once we get ROOT, we should be able to back this up out of \system
shayne77 said:
hey cad,
Made any headway here?
I just bought an SGS2 from Telstra as well and I have a similar phone to yours.
PDA: DVKF4
PHONE: DVKF2
CSC: TELKF3
I too would like to retain the stock kernel, firmware and csc.
If we root with an insecure kernel, how do we go back to stock kernel if it's not downloadable?
Could we just flash another kernel if we are making a warranty claim and hope they don't check?
I assume CSC is where all the Telstra crap is stored and once we get ROOT, we should be able to back this up out of \system
Click to expand...
Click to collapse
nope, mine is still un-root. still waiting for the stock rom to be available. however, i have acquire the "jig".
shayne77 said:
hey cad,
I too would like to retain the stock kernel, firmware and csc.
Could we just flash another kernel if we are making a warranty claim and hope they don't check?
Usual is flash a relevant stock rom or older stock rom and update via Kies.
I assume CSC is where all the Telstra crap is stored and once we get ROOT, we should be able to back this up out of \system
CSC is a file for network settings and does not contain any customized add ons from provider .
jje
Click to expand...
Click to collapse
Custom Rom
Hi all I new to all this so could someone point me in the right direction...
1. I need a noob friendly guide to explain what rooting is.
2. How to root.
3 what is odin and all the tools required to root and flash custom firmware.
Video tutorials would be healpful. Im comming from a HTC HD2 but it feels like the explanations were easier to find.
Thanks in advance.
Ebz_09 said:
Hi all I new to all this so could someone point me in the right direction...
1. I need a noob friendly guide to explain what rooting is.
2. How to root.
3 what is odin and all the tools required to root and flash custom firmware.
Video tutorials would be healpful. Im comming from a HTC HD2 but it feels like the explanations were easier to find.
Thanks in advance.
Click to expand...
Click to collapse
You could have used the Search for that.
Official Firmware : http://forum.xda-developers.com/showthread.php?t=1075278
CF-Root + Odin and Kernels : http://forum.xda-developers.com/showthread.php?t=1103399
Guide and information on various things : http://forum.xda-developers.com/showthread.php?t=723596
Syrellaris said:
You could have used the Search for that.
Official Firmware : http://forum.xda-developers.com/showthread.php?t=1075278
CF-Root + Odin and Kernels : http://forum.xda-developers.com/showthread.php?t=1103399
Guide and information on various things : http://forum.xda-developers.com/showthread.php?t=723596
Click to expand...
Click to collapse
Pity my official firmware is not listed
sent from my phone
(please excuse any typographical errors)
Guys,
Recently ditched my Desire HD which I've had alot of fun with for (what I considered to be) a far superior phone but basically got a little fed up with the display after catching a glimps of the SGS2's screen, haven't had the HD on since!
Although I considered myself adapt at flashing and rooting, I have to admit to finding myself a little confused here as to what exactly I can do with my phone. Yep, I've searched, nope, I don't want flamed, just need a few things cleared up then I'm off to have some fun!
Details from my phone...
PDA: I9100XWKF3
PHONE: I9100XXKH3
CSC: I9100CPWKD1
I'm rooted using CF matched Kernel and have remained on that, does no harm as far as i'm aware except for yellow triangle at boot..
I'd like to go from 2.3.3 to 2.3.4 too and wondering about what to flash and what would fit, my CSC is Carphone Warehouse would that be correct? How important is it to match CSC?
Regards Baseband, doesn't really matter does it but no harm in trying modems is there?
And firmware, thought about Frankenstein XXKF3 or 4 or am I getting things totally wrong? Think it's the WK to XX and not sure what impact that'll have.
And on that note, does the firmware version stiplulate which ROM I can load? So if i go to 2.3.4 (XXKH3 or 4) am I then limited to flashing only XXKH3 or 4 ROM's? Does it matter what I flash over my phone? I've also read that some ROM's contain Kernels and may have to flash a stock kernel after flashing the ROM to match firmware or even re-root?
Actually the more I read back on that, appears I know nothing at all and that's not even funny! Even went back to the original SGS forums in the hope that I'd find what I need there.
I know that unless I move back to stock (which I am at the moment), Kies wont off the eventual 2.3.4 update but to be honest I'm not fussed as developers and cooks here do a much better job and that's experience from my HD days.
I have flashed MIUI as that's the ROM I used longest on the HD, loved it but quickly went back the more I satrted to read and to be honest, would prefer to stay stock for a while and get used to the phone, is that do-able with a flash from the developers forum?
So does the ROM have to match the firmware I'm currently using, can I upgrade to 2.3.4 firmware, choose a kernel of my choice and any rom?
Obviously not picking something up, hopefully someone has the answer I need without the links to pages read allready, want to start having some fun and soon!
Cheers!
I
'd like to go from 2.3.3 to 2.3.4 too and wondering about what to flash and what would fit, my CSC is Carphone Warehouse would that be correct? How important is it to match CSC?
Click to expand...
Click to collapse
csc is what contains your data settings and is need for internet you should keep the one you have for best internet quality.
Regards Baseband, doesn't really matter does it but no harm in trying modems is there?
Click to expand...
Click to collapse
no it does not matter if you use different modems.
And firmware, thought about Frankenstein XXKF3 or 4 or am I getting things totally wrong? Think it's the WK to XX and not sure what impact that'll have.
Click to expand...
Click to collapse
firmware is read by the last three letters KF3 is what you currently have.
there is no problem upgrading to KH4.
And on that note, does the firmware version stiplulate which ROM I can load? So if i go to 2.3.4 (XXKH3 or 4) am I then limited to flashing only XXKH3 or 4 ROM's? Does it matter what I flash over my phone? I've also read that some ROM's contain Kernels and may have to flash a stock kernel after flashing the ROM to match firmware or even re-root?
Click to expand...
Click to collapse
no your not limited to flashing any rom, you can mix and match arounding to your needs and preferences.
after rooting they reflash the kernal to get rid of the yellow triangle, there is a tuturial for that chainfire's rooting thread, 2nd post.
So does the ROM have to match the firmware I'm currently using, can I upgrade to 2.3.4 firmware, choose a kernel of my choice and any rom?
Click to expand...
Click to collapse
no the rom does not match the firmware, yes you can upgrade to 2.3.4.
yes you choose the kernal and rom that you prefer.
All roms contain a kernel .
CSC is not really required as long as you enter the settings for your network manually but stick to cwm or xeu for UK ..
CSC are not upgraded and are often much older than the rom version .
KH3 probably the best current modem .
Rom is the whole firmware kernel modem OS etc .
You can have a KF2 firmware and swap kernel to KH2 and modem to KG2 in theory and it will work most of the time for varying combinations .
USB jif is better than flashing kernel to remove warning triangle as it also resets rom counter to zero
Me >>Cognition 1.51 rom based on KH3 and i have KG2 modem and no CSC .
Kernels have swapped just the kernel about four times on this and swapped and tried every rom on here .
Rom backed up using Nandroid via CWM recovery and apps backed up using Titanium pro .
Even a failed boot is usually recoverable with ease on SGS2 .
jje
Hello,
I've got S2 with Cognizant and Speedmod S2 Kernel. Everything works fine. I'll try to put it as "ordered" as possible.
Few doubts,
1) I'm a Rom Junkie(I came over from x10) and I don't have warranty, I see a lot of people got IMEI changed and even though they backed up "efs" partition, Nothing fixed (It's a hassle to take it to service center). Is there a proper way to safeguard "efs" partition (which contains IMEI) as per what i see on other thread.
2) I'm on a custom rom, How do I get back to official rom using KIES? Do I have to flash an official kernel or get back to official rom+kernel? How does this KIES thing work? I'm from India wondering if there is 2.3.5 update?
3) Why don't we have vodoo kernel just like GS-1? They were awesome.
4) if I flash the latest 2.3.5 will I loose the functionality to remove "yellow" triangle? Do I have to backup the bootloader or update the bootloader? Any clear info on this?
Thanks for all your help and responses, it would be appreciated.
- Neo
Neo said:
Hello,
I've got S2 with Cognizant and Speedmod S2 Kernel. Everything works fine. I'll try to put it as "ordered" as possible.
Few doubts,
1) I'm a Rom Junkie(I came over from x10) and I don't have warranty, I see a lot of people got IMEI changed and even though they backed up "efs" partition, Nothing fixed (It's a hassle to take it to service center). Is there a proper way to safeguard "efs" partition (which contains IMEI) as per what i see on other thread.
2) I'm on a custom rom, How do I get back to official rom using KIES? Do I have to flash an official kernel or get back to official rom+kernel? How does this KIES thing work? I'm from India wondering if there is 2.3.5 update?
3) Why don't we have vodoo kernel just like GS-1? They were awesome.
Thanks for all your help and responses, it would be appreciated.
- Neo
Click to expand...
Click to collapse
hey buddy if you want to flash an official rom i would say do it through odin. go into the development forum original that is and find the stock rom thats in your region and follow the instructions through that thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Thanks for your answer but I would really appreciate if someone answers my questions in the order i've posted since it would be easier to understand for me as well as everyone.
Thanks for your time tho!
Neo said:
Thanks for your answer but I would really appreciate if someone answers my questions in the order i've posted since it would be easier to understand for me as well as everyone.
Thanks for your time tho!
Click to expand...
Click to collapse
My apologies buddy. If i knew the answers to your other two questions i would of answered in the order you wanted. apologies and i hope you get the info you want...
I dont have all the answers but ill tell you what i know
#1-Yes its a good idea to back-up your efs file.Not hard to do really.
The easiest ways would be:Full nandroid back-up,CWM(although conflicting reports of efs back-up in folders),copying efs folder to /data in phone and not internal-sd with root explorer(apparently internal sd looses permissions when copying).There is Hellcats KTool and apps like Nutrilaty also.Those to me being the easiest
#2-Kies needs to be installed to flash via odin as installing kies installs the drivers.Kies wont bring back a stock firmware,only Odin can do that and kies wont recognize your phone with a none official firmware.It can be used with an official firmware and a root kernel without problems though.If you have an official firmware in your phone and you plug it in to kies and there is a 2.3.5 update it will automatically advise you.
#3-that one i dont know.Sorry
#4-If you flash to 2.3.5 officialy or from another site you will be stuck with the yellow triangle as far as i am aware as it contains the new bootloader and can not be re-set with the jig.You can flash it here on XDA from this link
http://forum.xda-developers.com/showthread.php?t=1075278
which contains the old bootloader.Its 2.3.5 XXK13 and lets you re-set the counter and get rid of the triangle.
Neo said:
Hello,
I've got S2 with Cognizant and Speedmod S2 Kernel. Everything works fine. I'll try to put it as "ordered" as possible.
Few doubts,
1) I'm a Rom Junkie(I came over from x10) and I don't have warranty, I see a lot of people got IMEI changed and even though they backed up "efs" partition, Nothing fixed (It's a hassle to take it to service center). Is there a proper way to safeguard "efs" partition (which contains IMEI) as per what i see on other thread.
No only back it up.
I use
http://www.appbrain.com/app/nitrality/com.nfye.insanity.toolbox
2) I'm on a custom rom, How do I get back to official rom using KIES? Do I have to flash an official kernel or get back to official rom+kernel?
Stock rom Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
How does this KIES thing work?
Its the official Samsung update path you install it first .
I'm from India wondering if there is 2.3.5 update? NO
3) Why don't we have vodoo kernel just like GS-1? They were awesome.
r search its been answered at the very start of this forum .
4) if I flash the latest 2.3.5 will I loose the functionality to remove "yellow" triangle?
NO but you cannot reset custom rom counter .
Two suggestions one you start reading the FAQS and GUIDES and two you may get relevant Indian information from the Indian thread .
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
I want to root my phone. I have been reading alot of tutorials and posts made here in the forum. Now I think I know enough to root the phone. I am just confused about one little thing; can I flash any cf-root kernal to my phone or I need specific. Help me in choosing the kernal from Hellcat's one.
I downloaded XXKI4 from Hellcat's page but I am not sure. Which CF-root kernal should I flash?
This is my phone details according to Kies:
PDA: KJ2
PHONE: KI1
CSC: KJ1 (XSG)
2.3.5 (Updates from Kies)
Click to expand...
Click to collapse
I had it updated using Kies. I want to know whether I can use any sg2 kernal on my phone or I have to be specific according to my phone details? I think I screwed up big time rooting by installing those updates..
This is the phone status picture taken:
http://imgur.com/0Kybt
cf-root kernel first mate...
First of all, you have to flash a cf-root kernel with odin using a .tar file. Then you can flash the kernel you want, if it is compatible with your rom. Usually, this is said in kernel thread.. Hope this helps!!
pHraiL^ said:
I want to root my phone. I have been reading alot of tutorials and posts made here in the forum. Now I think I know enough to root the phone. I am just confused about one little thing; can I flash any cf-root kernal to my phone or I need specific. Help me in choosing the kernal from Hellcat's one.
I downloaded XXKI4 from Hellcat's page but I am not sure. Which CF-root kernal should I flash?
This is my phone details according to Kies:
I had it updated using Kies. I want to know whether I can use any sg2 kernal on my phone or I have to be specific according to my phone details? I think I screwed up big time rooting by installing those updates..
This is the phone status picture taken:
http://imgur.com/0Kybt
Click to expand...
Click to collapse
You should read Chainfire's CF-Root thread and use CF-Root kernel for XWKJ2 in 7. post => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
Good luck !
Flash using the cf-root that matches your stock/current kernel, make a cwm backup, then you can change to whatever Rom you fancy. Me personally i just rooted and removed all the Orange crap and tried a couple of Roms but in the end the phone is that good im happy with rooted stock so restored my backup
Sent from my GT-I9100 using XDA App
I give up -- I thought I know enough to safely root my phone but it's hard =D. New things keeps coming up..
I just wanted someone to pin point me that this is the cf-root you should be using for your phone details as it is the best for you and with that you can easily install other custom ROMs (I want sensation one) and gain root access ofcourse.
Nevermind, I will keep doing the homework until I crack it up!
ANY help is still appreciated because I have files ready..
pHraiL^ said:
I want to root my phone. I have been reading alot of tutorials and posts made here in the forum. Now I think I know enough to root the phone. I am just confused about one little thing; can I flash any cf-root kernal to my phone or I need specific. Help me in choosing the kernal from Hellcat's one.
I downloaded XXKI4 from Hellcat's page but I am not sure. Which CF-root kernal should I flash?
This is my phone details according to Kies:
I had it updated using Kies. I want to know whether I can use any sg2 kernal on my phone or I have to be specific according to my phone details? I think I screwed up big time rooting by installing those updates..
This is the phone status picture taken:
http://imgur.com/0Kybt
Click to expand...
Click to collapse
Hi i read up on rooting my S2 on this website and youtube and i was confident that i could do it, they all made it sound and look easy.
I went ahead and flashed my Kernel (XWKF3) using ODIN 1.85 and it went through process said successful and rebooted as said but soon as the first black screen comes on saying "SAMSUNG GALAXY S2 GTI9100" it just stays on this screen and nothing else happens.
It is therefore Semi-Bricked, i have tried several kernels and firmware and then it totally bricks, thou lucky i bought a usb jig that puts it back into download mode.
My advice is to be 100% sure and do a lot of research before proceeding and if anyone got an idea what i can do to get my phone working again please let me know
If you chose to use Hellcat's Kernel, then you don't need CF-ROOT Kernel.
HellcatDroid said:
Features
Root
Kernel comes "instant rooted", after flashing this kernel your system is completely rooted (su, busybox and the Superuser app).
Nothing more needs to be done, totally newb friendly
Click to expand...
Click to collapse
Just download the Kernel that matches your current Kernel version.
To find out what Kernel you are using, Settings -> About
Else you can just go to Dialer, then *#1234#
The PDA version is also your Kernel Version.
Run ODIN, select the hellcat kernel *.tar file under PDA, then start.
DO NOT REPARTITION
DO NOT ERASE EFS
You say PDA version is your kernal version, it means KJ2 is my kernal version. I can't find the match for this kernal on hellcat's page. Though my Baseband version in 'about' shows XXKI4. Since it's matches the kernal on Hellcat's page, I thought this is the kernal version.
So now I have to find a kernal version for my PDA version? And what is the difference between cf-root and the hellcat's kernals?
Thanks.
pHraiL^ said:
You say PDA version is your kernal version, it means KJ2 is my kernal version. I can't find the match for this kernal on hellcat's page. Though my Baseband version in 'about' shows XXKI4. Since it's matches the kernal on Hellcat's page, I thought this is the kernal version.
So now I have to find a kernal version for my PDA version? And what is the difference between cf-root and the hellcat's kernals?
Thanks.
Click to expand...
Click to collapse
my advice to you, being a 2 months old newbie myself, is to read for a few days around XDA. you can learn alot and make sure you don't mess things up.
and get yourself a JIG off ebay ASAP. It's like 2 bucks, and it's worth it.
I myself, flashed CF-Root-SGS2_XX_OXA_KH1-v4.1-CWM4 on my SII and than plugged JIG to get rid off the yellow triangle. It was easy. For now I'm running like that on stock to get familiar in android cos this new to me (former iPhone user). After a "test/learning" mode I'll probably flash Galnet MIUI.
my version of device is:
android version 2.3.3
baseband version I9100xxkg5
Kernel version 2.6.35.7-I9100jpkh1-cl453266 [email protected]dell140 #2
build number gingerbread.jpkh1
and that's why I flashed the "KH1" version cos I'm still unsure the other "close/similar" versions I can flash on my device.
If there is an exact version of CF-Root for your version flash that one and follow CFs instructions on the first page of his thread (http://forum.xda-developers.com/showthread.php?t=1103399).
hope this helps. If you have any other specific questions ask here and if I now the answer, I'll help.
cheers.
pHraiL^ said:
I give up -- I thought I know enough to safely root my phone but it's hard =D. New things keeps coming up..
I just wanted someone to pin point me that this is the cf-root you should be using for your phone details as it is the best for you and with that you can easily install other custom ROMs (I want sensation one) and gain root access ofcourse.
Nevermind, I will keep doing the homework until I crack it up!
ANY help is still appreciated because I have files ready..
Click to expand...
Click to collapse
I have only ever used CF-Root for rooting so I can't comment on Hellcat etc but what I can say is that all the information required for CF-Root is in Chainfire's thread http://forum.xda-developers.com/showthread.php?t=1103399
It specifically states how to find out which file to use at the bottom of the very 1st post.
I was totally new to all this rooting and flashing firmware business until I found the XDA forum and I can only speak from personal experience but I have found that as long as you read, read then read again and follow the instuctions to the absolute letter you shouldn't have any difficulties.
Thanks for the tip man but I can't find cf-root KJ2 for my phone. I tried searching and failed. I'll keep looking.
Ive rooted my phone via odin. Flashed cf root kernel kf1 to remove the yellow triangle. But as i was about to flash the rom using cwm recovery mode, its opening up to a "manual mode", hence i cant flash the roms. Any ideas what might cause this?
I have rooted my SGS2 (xwkg1). I didn't know the first thing about it, and found this forum to be the best of knowledge for playing around with my phone.
If you research enough you will find the right post showing a step by step way to root your phone (so easy) and flash ROMs. I am ready to play the ROM game now..
Follow these steps..
http://forum.xda-developers.com/showthread.php?t=1125414
Just make sure you get the right kernel for your particular phone.
If you want noob steps. Let me know..
---------- Post added at 03:31 PM ---------- Previous post was at 03:15 PM ----------
Find your kernels here (Special thanks to Odia)
http://forum.xda-developers.com/showthread.php?t=1101671
I am confused in choosing the kernal for my phone. You see my baseband version shows XXKI4 which matches a kernal back there, it confuses me alot. But my kernal version shows JPKJ2, for which I can't find a kernal. Whole lot of confusion in choosing a matching kernal.. =(
Will GT-I9100_XWKJ2_insecure work for my kernel version JPKJ2?
And I found this kernel too; CF-Root-SGS2_XW_XEF_KJ2-v5.0-CWM5.zip
Chainfire said XW and the initial doesn't matters if it's KJ2. But mine's JPKJ2
----
It_ler said:
You can use CF-Root kernel for XW_XEF_KJ2 to root your ROM.
Please make a backup before flashing.
Click to expand...
Click to collapse
It_ler said:
There are several posts which say that CF-Root kernel XX_KI4 and XW_KI8 will work fine on JPKJ2.
So, use one of them to root your phone as long as Chainfire is absent.
As soon as he posts a CF-Root kernel for KJ2, you can easily flash this kernel over the "older" one.
Click to expand...
Click to collapse
Which one now?
http://forum.xda-developers.com/showpost.php?p=19013036&postcount=7
Please take time to read as:
Help! Which file do I use ?
Listen closely, for I will say zis only once!
Go to Settings -> About phone -> Kernel Version. Note the string present there:
2.6.35.7-I9100XXKG1-CL349526
What matters most (KG1) in this case, is in bold. Try to find the matching file under downloads:
CF-Root-SGS2_XX_OXA_KG1-v4.1-CWM4.zip
The XX and OXA identifiers are not that important. Usually a "KG1" kernel is a "KG1" kernel, and that is that. Sometimes (pretty rare) it happens there will be multiple different kernels with the same name in different firmwares, that are actually different. If this happens, they are usually only very minor changes and you should expect them to still be fully compatible. I include the "XX" and "OXA" identifiers so the very advanced users can deduce from which full firmware I have taken the kernel file.
Don't worry too much, just find the matching download and use it. What if there is no matching download ? You can ask me to make one, but I can tell you right now, I very very rarely make CF-Root's for kernels on request, unless it is the very latest kernel that has been released by Samsung. In the latter case, be sure to let me know. If there's no match and I'm not making one, try finding the closest match. You should treat "KG1" as a number, but instead of 1-9, we have 1-9, A-Z (where A would be 10, and Z would be 35). "KG2" is really close to "KG1", "KF1" is not close to "KG1" at all. I hope that makes sense.
Click to expand...
Click to collapse
Rather than creating a new thread the best option is to post in pre existing thread this provides you get help and if others in same situation can read answer to posts....
On that note thread closed.
Hello everybody,
I'm going to install a new ROM - it was advised to me frankstain XWLA4 ROM - and I still have some question about installing that ROM:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
4- By installing Stock ROM and CF-root I won't change the kernel right?
Thanks.
yellow simbol is not error. u get it when u put custom rom. but u can move it. chainfire make app for that.
Sent from my GT-I9100 using XDA App
In fact my main question is: which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
The others I think I know the answer but this question is essencial so I can start to install the new Firmware.
LA4 is very stable I've been running it for the last two days with no problems. If you flash a CF kernel you will have a different kernel but it will be as close to stock as possible just with a couple of extra features. You can down load the the original firmware/kernel from intratechs thread. All you need to do is flash a frankesten LA4 from intratech, it's all in one so you just use pda in odin.
Sent from my GT-I9100 using Tapatalk
Thanks man but I don't know what's LA4 ROM... and a buddy of our on anoher thread recommended me frankstain XWLA4 ROM and so I would like to install it.
For example, in this case:
"XWLA4
Android 2.3.6
There is no carrier branding
This package has: PDA: XWLA4| Modem/phone: XXKI3| CSC: XEUKH2
Download: http://uploadmirrors.com/download/3V...I9100XEUKH2.7z
XWLA4 Stock Kernel: http://uploadmirrors.com/download/0M..._I9100XWLA4.7z
Password: [email protected]
"
What should I install first? Kernel or the firmware? And where do I put Kernel on Odin?
Thanks.
marcadam said:
LA4 is very stable I've been running it for the last two days with no problems. If you flash a CF kernel you will have a different kernel but it will be as close to stock as possible just with a couple of extra features. You can down load the the original firmware/kernel from intratechs thread. All you need to do is flash a frankesten LA4 from intratech, it's all in one so you just use pda in odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
diogogomes11 said:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
Click to expand...
Click to collapse
Most firmwares will have kernels included. Work with that for now.
diogogomes11 said:
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
Click to expand...
Click to collapse
Yes. Those "Frankenstein" packages are stock, except Intratech mixed and matched the PDA, CSC, and modems. They just won't get recognized by Kies as a valid updateable firmware because of this though.
diogogomes11 said:
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
Click to expand...
Click to collapse
Flash an unbranded stock firmware. Post #2 above the Frankenstein firmwares of the same thread. Or the Frankenstein ones. The only difference is the non-Frankenstein ones will probably be recognized by Kies as upgradeable, and the Frankenstein ones will probably not.
diogogomes11 said:
4- By installing Stock ROM and CF-root I won't change the kernel right?
Click to expand...
Click to collapse
Wrong. If you install just stock ROM, yes. CF-Root is a custom kernel, so if you install that, you ARE changing the kernel.
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
diogogomes11 said:
What should I install first? Kernel or the firmware? And where do I put Kernel on Odin?
Click to expand...
Click to collapse
As above, most if not all firmwares come with a kernel. If you want a custom kernel you must flash it AFTER you flash a firmware. Else if you flash a kernel first, then the firmware, then the firmware's kernel will overwrite the kernel you flashed first.
Kernels generally go in the PDA section of Odin.
EDIT: I think I see your confusion. You're wondering about the "stock kernel" link that's right below the firmware link. Right? Well that's there just in case you need it. For example, if you flashed a CF-Root kernel, and wanted to flash the stock kernel back. If you never end up flashing a non-stock kernel, then you won't need it. But I'd download it anyways, just in case you need it later.
diogogomes11 said:
Hello everybody,
I'm going to install a new ROM - it was advised to me frankstain XWLA4 ROM - and I still have some question about installing that ROM:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
4- By installing Stock ROM and CF-root I won't change the kernel right?
Thanks.
Click to expand...
Click to collapse
1.XWLA4 is 2.3.6 so if you want to install a ROM with this Firmware and you are already on 2.3.6 then you dont need to flash anything.Root and flash the ROM.You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM.
1A. A kernel goes in PDA in Odin.
2.Its safe to install any ROM as long as you follow the instuctions that the Dev provides.You will have problems if for example you are on,as I already mentioned,2.3.5 and flash a 2.3.6 ROM.Always flash a ROM thats compatable with your Firmware.Frankenstein has firmwares not ROMs.Developers have ROMs.
3.To get rid of carrier apps all you need to do is flash a Firmware or custom ROM.Thats all.After flashing a Firmware its a good idea to do a factory reset.
4.By installing a CF-Root kernel you are changing the stock kernel for a root kernel.Kies will still work with a stock Firmware and root kernel.Kies OTA updates will not work with a custom ROM nor updates via Kies.
You diserved many thanks man
EDIT: I think I understand what you're saying... As my actual firmware is 2.3.5 and I have a stock Kernel (I never touched it since I have my phone), I just have to install the 200MB file on Odin with the 2.3.6 firmware and that's ok?
ctomgee said:
Most firmwares will have kernels included. Work with that for now.
Yes. Those "Frankenstein" packages are stock, except Intratech mixed and matched the PDA, CSC, and modems. They just won't get recognized by Kies as a valid updateable firmware because of this though.
Flash an unbranded stock firmware. Post #2 above the Frankenstein firmwares of the same thread. Or the Frankenstein ones. The only difference is the non-Frankenstein ones will probably be recognized by Kies as upgradeable, and the Frankenstein ones will probably not.
Wrong. If you install just stock ROM, yes. CF-Root is a custom kernel, so if you install that, you ARE changing the kernel.
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
As above, most if not all firmwares come with a kernel. If you want a custom kernel you must flash it AFTER you flash a firmware. Else if you flash a kernel first, then the firmware, then the firmware's kernel will overwrite the kernel you flashed first.
Kernels generally go in the PDA section of Odin.
Click to expand...
Click to collapse
Good work man. You said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM"... So, in this case I have a Vodafone ES 2.3.5 ROM so before installing XWLA4 I have to install another 2.3.6 ROM? Is this it?
There is my info about the ROM I have:
PDA: I9100BU KJ3
PHONE:I9100BU KI1
CSC:I9100 ATLKI2
cooza said:
1.XWLA4 is 2.3.6 so if you want to install a ROM with this Firmware and you are already on 2.3.6 then you dont need to flash anything.Root and flash the ROM.You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM.
1A. A kernel goes in PDA in Odin.
2.Its safe to install any ROM as long as you follow the instuctions that the Dev provides.You will have problems if for example you are on,as I already mentioned,2.3.5 and flash a 2.3.6 ROM.Always flash a ROM thats compatable with your Firmware.Frankenstein has firmwares not ROMs.Developers have ROMs.
3.To get rid of carrier apps all you need to do is flash a Firmware or custom ROM.Thats all.After flashing a Firmware its a good idea to do a factory reset.
4.By installing a CF-Root kernel you are changing the stock kernel for a root kernel.Kies will still work with a stock Firmware and root kernel.Kies OTA updates will not work with a custom ROM nor updates via Kies.
Click to expand...
Click to collapse
diogogomes11 said:
You diserved many thanks man
Although, a friend of ours on xda said to me that XWLA4 is excellent firmware so I would like to install it, but I don't know what to install first on Odin, the Kernel or the 200MB ROM are you understanding?
Click to expand...
Click to collapse
*sigh*... I'm understanding. It's pretty clear you are not.
Please read the "Edit" portion of my post above again. You don't need to install the kernel at all. That kernel is the stock kernel. It is already in the ROM. The only reason it is linked separately is if you flashed a different, non-stock kernel, and later wanted to flash back to a stock kernel.
If you DO want to flash a custom kernel, then you will ALWAYS have to flash it AFTER you flash a ROM. Because the kernel that is included with the ROM will overwrite whatever kernel is on the phone.
Savvy?
EDIT: We must've been posting at the same time.
diogogomes11 said:
You diserved many thanks man
EDIT: I think I understand what you're saying... As my actual firmware is 2.3.5 and I have a stock Kernel (I never touched it since I have my phone), I just have to install the 200MB file on Odin with the 2.3.6 firmware and that's ok?
Click to expand...
Click to collapse
Yes.
Thanks man. Now I think I'm understanding too The other colleague said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM." So, if I want to install XWLA4 ROM I have to install another 2.3.6 first? I think that's my last main doubt ?
ctomgee said:
*sigh*... I'm understanding. It's pretty clear you are not.
Please read the "Edit" portion of my post above again. You don't need to install the kernel at all. That kernel is the stock kernel. It is already in the ROM. The only reason it is linked separately is if you flashed a different, non-stock kernel, and later wanted to flash back to a stock kernel.
If you DO want to flash a custom kernel, then you will ALWAYS have to flash it AFTER you flash a ROM. Because the kernel that is included with the ROM will overwrite whatever kernel is on the phone.
Savvy?
EDIT: We must've been posting at the same time.
Yes.
Click to expand...
Click to collapse
diogogomes11 said:
Thanks man. Now I think I'm understanding too The other colleague said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM." So, if I want to install XWLA4 ROM I have to install another 2.3.6 first? I think that's my last main doubt ?
Click to expand...
Click to collapse
Not if it's stock. Depends on what he was talking about. Some custom ROMs require you to be on the same base version (i.e. 2.3.6) before flashing them.
You should be able to flash the stock XWLA4 ROM right now, if you've not updated your phone at all yet.
The Frankenstein XWLA4 ROM too?
ctomgee said:
Not if it's stock. Depends on what he was talking about. Some custom ROMs require you to be on the same base version (i.e. 2.3.6) before flashing them.
You should be able to flash the stock XWLA4 ROM right now, if you've not updated your phone at all yet.
Click to expand...
Click to collapse
diogogomes11 said:
The Frankenstein XWLA4 ROM too?
Click to expand...
Click to collapse
Yes. As stated, the only difference on Intratech's official firmware thread between the fully stock ROMs and the Frankenstein ones is he mixed and matched CSC and modems with PDAs on the Frankenstein ones. While this doesn't necessarily affect the operation of the phone, it will keep Kies from recognizing it as an updateable phone.
OK. Thanks and sorry for sending a private message at some seconds ago about this theme but I wanted to flash my new ROM
If I can help you on another thing, I'm available.
Thanks all xda good useres like you guys.
ctomgee said:
Yes. As stated, the only difference on Intratech's official firmware thread between the fully stock ROMs and the Frankenstein ones is he mixed and matched CSC and modems with PDAs on the Frankenstein ones. While this doesn't necessarily affect the operation of the phone, it will keep Kies from recognizing it as an updateable phone.
Click to expand...
Click to collapse
diogogomes11 said:
OK. Thanks and sorry for sending a private message at some seconds ago about this theme but I wanted to flash my new ROM
If I can help you on another thing, I'm available.
Thanks all xda good useres like you guys.
Click to expand...
Click to collapse
PM ignored, then. Good luck.
I've already installed the firmware and have made root. All OK except that I do *#272*Device IMEI# with my IMEI in order to install my CSC and it always says ATL and doesn't let me write TPH and if I click on install with ATL letters it says it needs only 3 letters!
Can you help me on this situation?
Thanks again.
ctomgee said:
PM ignored, then. Good luck.
Click to expand...
Click to collapse
diogogomes11 said:
I've already installed the firmware and have made root. All OK except that I do *#272*Device IMEI# with my IMEI in order to install my CSC and it always says ATL and doesn't let me write TPH and if I click on install with ATL letters it says it needs only 3 letters!
Can you help me on this situation?
Thanks again.
Click to expand...
Click to collapse
I have no clue what you're talking about. So I can't help you, sorry.
EDIT: what are you trying to do, exactly?
Look at this topic: http://forum.xda-developers.com/showthread.php?t=1075278
On Frankenstein Firmware's it says:
"For MultiCSC packages you can change between csc by typing *#272*Device IMEI# into the dial pad and selecting the csc of your choice and press install. It will reset the device."
So I installed a Frankenstein firmware and to install my country CSC - Portugal - I have to do something else right? So I've done *#272*Device IMEI# in order to install my CSC and it always shows "ATL" and doesn't let me write "TPH" - the letters for my country - and if I click on install with "ATL" letters it says it needs only 3 letters!
I want to install my CSC so I can browse the Web and receive MMS on my Samsung Galaxy S2.
Thanks again.
ctomgee said:
I have no clue what you're talking about. So I can't help you, sorry.
EDIT: what are you trying to do, exactly?
Click to expand...
Click to collapse
That will work if you have a multi CSC pack and the Firmware that you have installed does not.You cant type in your CSC,you have to select it from the list.Not all Frankenstein Firmwares have multi-CSC packs thats why at the bottom of the page there is a list of other CSCs to flash at your own choice.If you look at the Firmware you have flashed to your phone (XWLA4) it clearly states "CSC: XEUKH2" which is for the Great Britian region.At the moment the links are down so you cant download any CSC packs so the only way to get your countries correct CSC is to flash a custom ROM that has a multi-CSC pack built in like I did.As for the ATL question...you said that you had an S2 from spain,correct?!..well ATL is the product code for Vodafone Spain.
EDIT:you can browse the web on another countries CSC although it may not be as good and MMS settings are provider set.You could flash XWKK(2.3.6) which has a CSC pack for the Netherlands but normally also a KOR one too.The KOR(KOREA) CSC works fine for Spain and Portugal.I would suggest a custom ROM to get the best out of your phone.There are a lot around.