I dont know why suddenly the screen of my archos 101 8 gb get too dark that i just can see just a few of buttons and thats all i cant read anything, i contact to the custom service but they didnt answer and i dont know what i can do :/
Have you set maximum brightness in the OS's settings?
hmm customer service was very quick for me - not even 1 day ...
anyway did u use any software tools for dimming screen?
If so - restart device - longpress power button and turn back on
otherwise its propably a backlight fail and just can be fixed by archos or some exchange display for ebay...
hmm customer service was very quick for me - not even 1 day ...
anyway did u use any software tools for dimming screen?
If so - restart device - longpress power button and turn back on
otherwise its propably a backlight fail and just can be fixed by archos or some exchange display for ebay...
damn so probably is the backlight XD because a didnt use any software its any way to try to high the light from the recovery mode?
Related
Hi
I seem to experience this problem on all HD2s. I activated the phonelock on HD2 and used a simple PIN for unlocking it. When I'm in the LockScreen, keying my PIN, the phone goes to suspend mode (or it seems like it, since the screen just blacks out and i need to press the power button again to see the lockscreen) after about 13 sec, everytime. This phenomenon happens only when phone is using battery power. It works fine when running on external power.
Is there a way disable this issue, or extend the time it blacks out. I'm using the default WM6.5 rom 1.66.707.1
Please help, Thank you.
same problem with me ! any solutions ???
settings menu all settings system power backlight
try increasing the timeout.
also settings menu all settings lock
see what options are in there. (mine won't start so i can't test it.)
I have tried all the settings i can find on the phone. I even tried changing Registry values that might be related to the timeouts. but still the same.
The screen will black out even while you are typing, so this rules out all the timers that will suspend the phone when idle for too long.
Please help, as this is a big issue for me.
Thanks.
so when ever the tab is fully charged the screen turns on and wont go of until i click the lock button.
i don't have power savings mode. timeout is set to one min. and no auto adjust screen power. 3.2 stock rom
i cant find any settings to adjust this specifically so i don't know what this is. i just don't like the idea of the tab sitting for hours with screen on
EDIT: also noticed that if i put to charge screen wont go of, just fades after the 1 min timeout. i must manually turn it of. i.e push lock button
Hi.
I haven't noticed anything like that when I have been using stock Rom...
If you put tablet to charge did the big-clock screensaver shows up?
If so, you must press back on the bottom tab to let it go away and then it wil fade out and turn off the screen after timeout you have set up in settings...
The only time when screen goes on after charging and stay in that state is when charging with Tablet switched off {big battery charging indicator show up...}...
is it the lock screen your talking about, if so then yes. tab is put to charge and locked. then when full it makes a sound then shows lock screen and fades a bit after some time, but doesn't turn of. screen is of until fully charged. then turns on.
Hmm... this doesn't seems to be normal. On my tab, when fully charged it just make a sound and doesn't unlock or light up the screen...
Which country are you from and what ROM are you using? This might be an unwanted "feature" of branded ROM from some operator/provider...
Maybe if you are planning to Root and give your Tab some nice new ROM from here, your problems will be solved...
im planing on rooting as soon as CM9 is done. im in norway. we dont have operators/providers screwing up our phones like in the states.
Hello all, my capacitive buttons on evo 3d are broken (some day they just stop responding) , so i googled for solution, find nothing, then i ordered new digitizer, now digitizer is waiting for me to have money to repair my phone. But some days ago ill installed CM10 With sweep2wake option. When my phone is screen off, when i touch the home button (thats is not working) guess what. IT LIGHTS THE PHONE AND RECOGNIZE TOUCH. While i sweep from home to search - my phone unlock (So my buttons recognize touch) I am now like wtf? Is there a way to examine those buttons with some sort of programs or etc? Is there a way of repairing them without changing digitizer?
Best regards, Bazyl93
Hi, I have the same problem, any solution?
Bazyl93 said:
Hello all, my capacitive buttons on evo 3d are broken (some day they just stop responding) , so i googled for solution, find nothing, then i ordered new digitizer, now digitizer is waiting for me to have money to repair my phone. But some days ago ill installed CM10 With sweep2wake option. When my phone is screen off, when i touch the home button (thats is not working) guess what. IT LIGHTS THE PHONE AND RECOGNIZE TOUCH. While i sweep from home to search - my phone unlock (So my buttons recognize touch) I am now like wtf? Is there a way to examine those buttons with some sort of programs or etc? Is there a way of repairing them without changing digitizer?
Best regards, Bazyl93
Click to expand...
Click to collapse
So the buttons only work for sleep to unlock or do they work like they should on the cm10 rom? If they do not work normally then it may be the s2w recognizes the area of the screen close to the buttons, but not the actual buttons.
Get kernel tuner and then go on to check with the brightness of capacitive buttons. There is a chance you have them at 1% and you can't make out if they are lit or not ...
I noticed that for some time does not work for me backlight keys or may be due to the replacement of the display?
msstunt14 said:
I noticed that for some time does not work for me backlight keys or may be due to the replacement of the display?
Click to expand...
Click to collapse
1st of all: what phone , what rom , what kernel, please.
backlight leds of keys are usally standalone (nothing to do with with screen), but it can be that the one who replaced the screen messed up some connector/cable
also keep in mind that the leds power off after some time (normal bevavious if u dont touch them they just stay on for 5-10 seconds (idk exactly i allways power of mine))
may try to set them to allways on to see if the show some uncommon behaviour
wt19i xNXT 11.1 stock kernel
The Capactive Touch buttons on Galaxy S2 does NOT dim or goes out automatically & rather radiates a strong touch screen light,even after the "Touch Key Light duration is altered to various intervals (1.5 sec or 6sec)" . The two Touch light only goes off with the Phone's Screen timeout or manually (pressing the power button) .
It was never like this till last week when the Octa-LCD inside my SGS2 broke & today when i changed the complete display assembly of the SGS2, i got to take note of this peculiar & harassing problem only now..which is eating up my mind.What's happening &why? Was the Screen replacement Not correctly carried out (done at my Authorised Samsung Service Centre) HARDWARE problem or is it due to any Software issues? (Samsung Service Centre did say that they did no software job,only just a screen replacement i.e a Hardware job on my SGS2)
i'm Rooted, on JB 4.1.2, Stock Rom with Siyah Kernel !
Though Samsung have offered me to replace my screen for a second time in a few days ( they dont have any more stock of the SGS2 scrren at this branch), but i myself NOT Sure..what's causing the problem ? (Everything in my SGS2 is running fine except this stressful quirk which was Not there before).
.'m at a fix ,please Help me with your advices ASAP !!!!
Have you tried flashing a different kernel like Apolo kernel 4.15b or try an older version of siyah kernel 6.0beta4.
I don't really think it is software problem if it was working perfectly fine before.
HELP my SGS2 !
Thanks @gsstudios for the good advice !
...but is there any app/mod for the SGS2 that can control the capacitive buttons light settings, other than the system settings for the SGS2 like the one> Galaxy Button Lights https://play.google.com/store/apps/details?id=com.notquiteinsane.galaxybuttonlights&hl=en (works for SGS6 but not in SGS2)
I'm Not quite a Flashholic,neither do i get much time to tinker around ..so any other quicker way,except flashing a different rom, to control the light settings?
* 1 important thing Maybe ...when my Phone with the "New" screen was booted for the first time, the "developer options" & "adb debugging" were left enabled by me ( to backup my contacts , messages,etc) Could this have any detrimental effect on the capactive button light settings? I have thereafter disabled/enabled those options & rebooted the phone many times but nothing simply changes !
Btw, if all other functions of the phone is Ok ( i checked the phone's sensors with CPU-Z & everything was running fine) & the Screen touch response seems perfectly ok ,then also can this capactive button quirk be the result of Hardware manfunctioning /defect arising from the very New replaced Samsung Octa LCD itself? // I did not install any new apps, nor me,nor "Samsung Service Center" did anything on the Software part of my SGS2 recently //
Currently, only two options for those Capacitive button key lights work :1) always on & 2) always off & i have opted for choice 2 to save the distraction from the glaring/disturbing light of the capactive buttons & mainly to save some battery power !
So,if any body else have a great idea to fix the light quick , i would be immensely thankful to all !
i think u should reflash stock firmware and see if that fixes it.
yeah, Zyfloss, as you said it & i also similarly thought...i reckon the problem has been solved as of now with thë flashing of the SGS2 official Stock JB 4.1.2 Rom,the capacitive lights now seems to be working normal,timing out automatically after 1.5 sec or 6 sec as i want it ! Anyway, Thanks to Everyone who saw my post, tried to help & replied ! :good: